1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
Commit Graph

46 Commits

Author SHA1 Message Date
Poul-Henning Kamp
079f2df393 Make the disk mini-layer check for and handle zero-length transfers
instead of the underlying drivers.
2001-05-06 21:55:22 +00:00
Poul-Henning Kamp
a468031ce8 Actually biofinish(struct bio *, struct devstat *, int error) is more general
than the bioerror().

Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
Paul Saab
6b8b8c7fdc Last commit was broken.. It always prints '[CTRL-C to abort]'.
Move duplicate code for printing the status of the dump and checking
for abort into a separate function.

Pointy hat to:	me
2001-03-28 01:37:29 +00:00
Paul Saab
f2a404d5a6 Change the dump routines to only abort if control-c is pressed.
If any other key is pressed, print a message stating that control-c
is how to abort.

Reviewed by:	peter
2001-03-27 06:24:08 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
Jonathan Lemon
55d782fcc3 Add crashdump support.
Tested by:	ps
2001-02-26 22:25:30 +00:00
Jonathan Lemon
7c258c0ef8 Add a flag value to the board identifiers, and use this to enable the
firmware for selected revisions of the controller.

Spotted by:  Alexander Hausner <alex@hugo.bmg.gv.at>
2001-01-09 14:49:41 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Jonathan Lemon
280a27d267 Add PCI id for the RAID LC2 controller.
Pick up correct location for the DEC version of the chip, this
got broken in a previous commit.
2000-12-01 15:26:11 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Jonathan Lemon
834801e8af Look at both the vendor and subvendor information when determining
whether this is a Smart Array.  This fixes a problem where the driver
would incorrectly match a Dell RAID device.

Reviewed by: msmith
2000-10-13 23:34:47 +00:00
Jonathan Lemon
1277c3bac4 The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.

Also, when using more than two smart controllers in one machine, the
disks were assigned the wrong drive number; fix this as well.
2000-07-27 22:24:44 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Jonathan Lemon
cbd280c6e0 Add code which actually checks for the NCR PCI id so it can be used. 2000-05-23 19:27:43 +00:00
Jonathan Lemon
1ec5e8e681 Add PCI ID for NEC/Compaq controller. 2000-05-22 13:59:32 +00:00
Jonathan Lemon
afd04c1090 Add PCI id for Compaq Smart Array 431 card. 2000-05-22 13:45:41 +00:00
Poul-Henning Kamp
9626b608de Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
Jonathan Lemon
f3cddbbdeb Add PCI identification for another SmartArray 4200, which identifies
itself as a DEC card instead of Compaq.
2000-05-04 20:23:56 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Matthew N. Dodd
815308668a - Fix a problem with the cdevsw struct that prevented the kernel from
booting on a RAID volume.
- Change 'id_foo' and 'idfoo' to 'idad_foo' and 'idadfoo'.  This makes
  names more consistent with the devices that the code belongs to (more
  in line with the style used in the amr/mlx driver.)

Reviewed by:	 jlemon
2000-04-22 06:28:03 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Matthew N. Dodd
ceaa35ef43 - Define registers as offsets from register base rather than offsets from
EISA slot base.
- Remove unused IOPORT resource.

Reviewed by:	 jlemon
2000-04-16 06:12:08 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Jonathan Lemon
e6affa6696 Change the maximum I/O transfer size to DFLTPHYS. This should fix
write corruption that some users were experiencing.
2000-04-13 23:42:55 +00:00
Matthew N. Dodd
22ca1311c0 - Add an additional call to eisa_add_iospace() so we get the right IOPORT
in attach.
- Change a EISA_CHANNEL_CLEAR to EISA_CHANNEL_BUSY in ida_v1_submit().

This may fix the problem with EISA IDA adapters though we have not heard
back from testers yet.

Reviewed by:	 jlemon
2000-04-13 18:09:05 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Jonathan Lemon
e7e1e770ed Cosmetic fix: "id" -> "idad" for devstat.
Missed in prior (approved) commit by: jlemon
2000-03-08 21:10:15 +00:00
Jonathan Lemon
ee7eb00e05 Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.

Tested by:  	david.w.james@bt.com  (existing compaq support)
Reviewed by:	msmith
Approved by:	jordan
2000-03-08 16:16:31 +00:00
Kenneth D. Merry
86b2c8466d Revamp the devstat priority system. All disks now have the same priority.
The same goes for CD drivers and tape drivers.  In systems with mixed IDE
and SCSI, devices in the same priority class will be sorted in attach
order.

Also, the 'CCD' priority is now the 'ARRAY' priority, and a number of
drivers have been modified to use that priority.

This includes the necessary changes to all drivers, except the ATA drivers.
Soren will modify those separately.

This does not include and does not require any change in the devstat
version number, since no known userland applications use the priority
enumerations.

Reviewed by:	msmith, sos, phk, jlemon, mjacob, bde
1999-12-08 04:45:23 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Peter Wemm
91bbda5f1f Call id_drvinit() from attach, not probe as the OS hasn't necessarily
decided which driver to use until attach.  Use DRIVER_MODULE().
1999-11-08 07:56:10 +00:00
Nick Hibma
3e2c6ca3b9 Removal of sys/device.h
- Move intrhook stuff into kernel.h
- Remove all occurrences of #device <device.h>
- Add kernel.h were necessary (nowhere)
- delete device.h

This file contained the structures for cfdata (old style config) and is no
longer used. It was included by most drivers.

It confuses the remote debugger as the definition of 'struct device' in
device.h is found before the one in bus_private.h.
1999-10-05 21:19:41 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
2186cd9e8d Use devstat_end_transaction_buf() rather than Use devstat_end_transaction() 1999-09-18 21:30:27 +00:00
Poul-Henning Kamp
94db13fe98 Fix various trivial warnings from LINT 1999-08-28 19:44:07 +00:00
Poul-Henning Kamp
10af1a2b5f We don't need to pass the diskname argument all over the diskslice/label
code, we can find the name from any convenient dev_t
1999-08-28 14:33:44 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
086646f7c6 Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.
1999-08-16 01:52:21 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Peter Wemm
9929d2a045 Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire
files.  config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
Jonathan Lemon
db57feb70b Compaq Smart RAID driver for -current. Based on the original ida.c
driver by Mark Dawson.  This probably needs some work, but is stable
enough to boot a RAID-only configuration, and survive `make world'.
1999-06-24 03:33:30 +00:00