table and the requirement on trailing zero bits.
* Remove the __aligned() compiler directives as these were found
to have a negative effect on the produced code.
Submitted by: bde
Approved by: das (mentor)
srandomdev(). This doesn't actually work
with any modern C compiler:
In particular, both clang and modern gcc
verisons silently elide any xor operation
with 'junk'.
Approved by: secteam
MFC after: 3 days
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
to be a wrapper for the canonical system header file. Unfortunately, we do
not have one (yet) and some times it is causing weird failures when clang
is used for building ports. More complete and correct file will come from
libcxxrt in the future.
Discussed with: dim, kib, theraven
MFC after: 1 week
* jail_setv will leak a parameter name if jailparam_import fails.
* jailparam_all loses the jailparam pointer on realloc error
(a clear freshman mistake).
* If jailparam_init fails, the caller doesn't need to jailparam_free
the buffer. That's not really clear, so set things to NULL allowing
jailparam_free to work without error (though it's still not required).
After further discussion, instead of pretending to use
uid_t and gid_t as upstream Solaris and linux try to, we
are better using u_int, which is in fact what the code
can handle and best approaches the range of values used
by uid and gid.
Discussed with: bde
Reviewed by: bde
address associated with the guest memory segment. This is because there is
no longer a 1:1 mapping between GPA and HPA.
As a result 'vmmctl' can only display the guest physical address and the
length of the lowmem and highmem segments.
chunks. This breaks the assumption that the entire memory segment is
contiguously allocated in the host physical address space.
This also paves the way to satisfy the 4KB page allocations by requesting
free pages from the VM subsystem as opposed to hard-partitioning host memory
at boot time.
The previous change (based on Solaris) doesn't work properly either
as the casting only has the effect of quieting the compiler.
Move back to the previous solution but adjust the sizeof()
type in xdr_array(). This should mostly work (by accident).
Reported by: bde
1) Don't iterate the loop from the environment array beginning each time,
iterate it under the last place we deactivate instead.
2) Call __rebuild_environ() not on each iteration but once, only at the end
of whole loop (of course, only in case if something is changed).
MFC after: 1 week
As part of the previous commit, uses of xdr_int() were replaced
with xdr_u_int(). This has undesired effects as the second
argument doesn't match exactly uid_t or gid_t. It also breaks
assumptions in the size of the provided types.
To work around those issues we revert back to the use of xdr_int()
but provide proper casting so the behaviour doesn't change.
While here fix a style issue in the affected lines.
Reported by: bde
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
This change matches the reference (OpenSolaris) implementation.
Tested by: David Wolfskill
Obtained from: Bull GNU/Linux NFSv4 Project (libtirpc)
MFC after: 2 weeks
__rpc_getconfip is supposed to return the first netconf
entry supporting tcp or udp, respectively. The code will
currently return the *last* entry, plus it will leak
memory when there is more than one such entry.
This change matches the reference (OpenSolaris)
implementation.
Tested by: David Wolfskill
Obtained from: Bull GNU/linux NFSv4 Project (libtirpc)
MFC after: 1 week
to craft environment variables with similar names like that:
a=1
a=2
...
unsetenv("a") should remove them all to make later getenv("a") impossible.
Fix it to do so (this is GNU autoconf test #3 failure too).
PR: 172273
MFC after: 1 week
. Change the API for the LD80C by removing the explicit passing
of the sign bit. The sign can be determined from the last
parameter of the macro.
. On i386, load long double by bit manipulations to work around
at least a gcc compiler issue. On non-i386 ld80 architectures,
use a simple assignment.
* ld80/s_expl.c:
. Update the only consumer of LD80C.
Submitted by: bde
Approved by: das (mentor)
This fixes a race condition where another thread may fork() before CLOEXEC
is set, unintentionally passing the descriptor to the child process.
This commit only adds O_CLOEXEC flags to open() or openat() calls where no
fcntl(fd, F_SETFD, FD_CLOEXEC) follows. The separate fcntl() call still
leaves a race window so it should be fixed later.
Because fts keeps internal file descriptors open across calls, making such
descriptors close-on-exec helps not only multi-threaded applications but
also single-threaded applications.
In particular, this prevents passing a temporary file descriptor for saving
the current directory to processes created via find -exec.
The attempt to merge changes from the linux libtirpc caused
rpc.lockd to exit after startup under unclear conditions.
After many hours of selective experiments and inconsistent results
the conclusion is that it's better to just revert everything and
restart in a future time with a much smaller subset of the
changes.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
Passing an invalid pointer results in undefined behaviour.
The wrappers in libthr access some of the data pointed to by the arguments
in userland, so that an invalid pointer will cause a signal and not an
[EFAULT] error return.
Furthermore, if the [EFAULT] error occurs when the kernel is writing, it is
not a proper error in the sense that the call still commits (changing the
signal disposition or accepting the signal).
MFC after: 1 week
The following change caused rpc.lockd to exit after startup:
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the
same way.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
. Fix the threshold for expl(x) where |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
* ld128/s_expl.c:
. Re-order logic in exceptional cases to match the logic used in
other long double functions.
. Fix the threshold for expl(x) where is |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
Submitted by: bde
Approved by: das (mentor)
. Guard a comment from reformatting by indent(1).
. Re-order variables in declarations to alphabetical order.
. Remove a banal comment.
* ld128/s_expl.c:
. Add a comment to point to ld80/s_expl.c for implementation details.
. Move the #define of INTERVAL to reduce the diff with ld80/s_expl.c.
. twom10000 does not need to be volatile, so move its declaration.
. Re-order variables in declarations to alphabetical order.
. Add a comment that describes the argument reduction.
. Remove the same banal comment found in ld80/s_expl.c.
Reviewed by: bde
Approved by: das (mentor)
Also, update the comment to describe the choice of using
a high and low decomposition of 2^(i/INTERNVAL) for
0 <= i <= INTERVAL in preparation for an implementation of
expm1l.
* Move the #define of INTERVAL above the comment, because the
comment refers to INTERVAL.
Reviewed by: bde
Approved by: das (mentor)
only affects i386. The double case was intentionally left broken
as an optimization, but we are getting closer to supporting
applications and/or kernels that change the (FreeBSD i386) default
rounding precision from FP_PD to FP_PE and never change it back,
and this requires the STRICT_ALIGN()s that were added to support
FP_PE to actually work in all precisions.
* Remove an extraneous semicolon at the end of a macro that was
supposed to be function-like.
Submitted by: bde
Approved by: das (mentor)
buffer. For now it fixes bug when following `ls` command will return data
from previous one aborted by pager. Also it should allow to read several
directories same time, for example, for recursive tracerse.
it is done in NetBSD/OpenBSD, and as it was here before r205728.
I personally think this API or its implementation is incorrect, as it is not
correct to filter collections based on report ID, as they are orthogonal
in general case, but I see no harm from supporting this feature.
PR: usb/171810
Submitted by: Vitaly Magerya <vmagerya@gmail.com>
MFC after: 1 month
The ENOTDIR mapping was introduced in r235266 for kern/128933 based on
an interpretation of the somewhat ambiguous language in the POSIX realpath
specification. The interpretation is inconsistent with Solaris and Linux,
a regression from 9.0, and does not appear to be permitted by the
description of ENOTDIR:
20 ENOTDIR Not a directory. A component of the specified pathname
existed, but it was not a directory, when a directory was
expected.
PR: standards/171577
MFC after: 3 days
versions. Instead use Imp's good work on "legacy" and follow the outcome
of the previous TRB discussions on this topic.
Now use the libc getline() if it exists, and only where it doesn't
create a bootstraping version.
For some reason, libc exports the symbol .cerror (HIDENAME(cerror)), albeit
in the FBSDprivate_1.0 version. It looks like there is no reason for this
since it is not used from other libraries. Given that it cannot be accessed
from C and its strange calling convention, it is rather unlikely that other
things rely on it. Perhaps it is from a time when symbols could not be
hidden.
Most of the amd64 assembler code jumps to .cerror using the GOT. It can jump
to it directly now, as in non-PIC mode.
There are also some minor size optimizations to instructions but they yield
virtually no benefit in the size of libc.so.7 due to padding.
Reviewed by: kib
For some reason, libc exports the symbol .cerror (HIDENAME(cerror)), albeit
in the FBSDprivate_1.0 version. It looks like there is no reason for this
since it is not used from other libraries. Given that it cannot be accessed
from C and its strange calling convention, it is rather unlikely that other
things rely on it. Perhaps it is from a time when symbols could not be
hidden.
Not exporting .cerror causes it to be jumped to directly instead of via the
PLT.
This change also takes advantage of .cerror's new status by not saving and
loading %ebx before jumping to it. (Therefore, .cerror now saves and loads
%ebx itself.) Where there was a conditional jump to a jump to .cerror, the
conditional jump has been changed to jump to .cerror directly (many modern
CPUs don't do static prediction and in any case it is not much of a benefit
anyway).
This change makes libc.so.7 a few kilobytes smaller.
Reviewed by: kib
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____
Fixed infinite loop in svc_run()
author Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____
__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____
Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____
Converted all uid and gid variables of the type uid_t and gid_t.
author Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____
libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.
rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
author Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)
Obtained from: Bull GNU/Linux NFSv4 Project
MFC after: 3 weeks
pthread_suspend_all_np() may have already suspended its parent thread.
Add locking code in pthread_suspend_all_np() to only allow one thread
to suspend other threads, this eliminates a deadlock where two or more
threads try to suspend each others.
to libc++.a and libc++_p.a, to make static linking of C++ executables
with libc++ easier. This is similar to the approach used in libstdc++.
MFC after: 2 weeks
Magic tests containing "search" or "regex" directives were incorrectly
compiled by "mkmagic" and were effectively ignored. This caused troff
files (for example) to be detected as simply "ASCII text" instead of
as "troff or preprocessor input, ASCII text".
PR: bin/170415
Approved by: consensus on developers@
MFC after: 3 days
On Windows, AUX is the auxiliary device, usually pointing to COM1.
Therefore it is forbidden to create a file named aux.c. To make it a bit
easier for Windows users to check out our source code, rename this file
to auxv.c.
MFC after: 1 month
Discussed with: kib
Suggested by: Eric van Gyzen <eric vangyzen net>
they need to refer to static constants, which C99 does not allow for
extern inline functions.
While here, change a comment in e_rem_pio2f.c to mention the correct
number of bits.
Reviewed by: bde
MFC after: 1 week
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this. POSIX does have a requirement on the
application that maxfds not exceed {OPEN_MAX}, but does not require the
implementation to check it ("may fail").
PR: 95239
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this.
PR: 95239
Submitted by: Todd Miller
CR4. This bit is specific to the Intel VTX and removing it makes the library
more portable to AMD/SVM.
In the Intel VTX implementation, the hypervisor will ensure that this bit is
always set. See vmx_fix_cr4() for details.
Suggested by: grehan
private data.
We can set/get private data with the documented el_get() and
el_set() so there's no need for our local extensions, which
never received much use anyway.
While here, also re-arrange the call to term_init_arrow. This
was left over from r89735 but is not required anymore.
This changes reduce differences against NetBSD's libedit.
MFC after: 2 months
compatibility with the INTERVALS macro used in the soon-to-be-commmitted
expm1l() and someday-to-be-committed log*l() functions.
Add a comment into ld128/s_expl.c noting at gcc issue that was
deleted when rewriting ld80/e_expl.c as ld128/s_expl.c.
Requested by: bde
Approved by: das (mentor)
. Remove a few #ifdefs that should have been removed in the initial
commit.
. Sort fpmath.h to its rightful place.
* ld128/s_expl.c:
. Replace EXPMASK with its actual value.
. Sort fpmath.h to its rightful place.
Requested by: bde
Approved by: das (mentor)
It is obvious that its modification time will change with each such file
builded.
This bug cause whole libelf to rebuild itself each second make run
(and relink that files on each first make run) in the loop.
format. These implementations are based on
PTP Tang, "Table-driven implementation of the exponential function
in IEEE floating-point arithmetic," ACM Trans. Math. Soft., 15,
144-157 (1989).
PR: standards/152415
Submitted by: kargl
Reviewed by: bde, das
Approved by: das (mentor)
Append '__' prefix to the tag of struct oflock, and put it under BSD
namespace. Structure is needed both by libc and kernel, thus cannot be
hidden under #ifdef _KERNEL.
Move a set of non-standard F_* and O_* constants into BSD namespace.
SUSv4 explicitely allows implemenation to pollute F_* and O_* names
after fcntl.h is included, but it costs us nothing to adhere
to the specification if exact POSIX compliance level is requested by
user code.
Change some spaces after #define to tabs.
Noted by and discussed with: bde
MFC after: 1 week
makelist:
change tr '[a-z]' '[A-Z]' to tr '[:lower:]' '[:upper:]' so that POSIX
systems work proerly regardsless of environment variable settings.
tokenizer.c:
pass lint on _LP64
Obtained from: NetBSD
MFC after: 2 weeks
bin/sh has been taught about el_gets setting the count to -1
on error, so now we can partially revert r238173 to reduce
differences with NetBSD's implementation.
Unfortunately NetBSD's libedit handling of EINTR (Revision
1.44 in read.c + SIGWINCH fixes) still causes trouble in
bin/sh and other utilities and has to be avoided.
MFC after: 1 month
This partially reverts some changes from r237448 that are causing
breakage when resizing under bin/sh .
Reverted changes from NetBSD are:
Mar 10 20:46:15 2009 - editline.3 read.c
make el_gets set the count to -1 on error to distinguish between EOF and
error.
Feb 19 15:20:22 2009 - read.c sig.c sig.h
reset and redraw on sigcont. From Anon Ymous.
Feb 15 21:24:13 2009
don't restart on EINTR, instead return NULL immediately. From Anon Ymous
PR: 169603
Reported by: Peter Jeremy, David Shao
MFC after: 3 days
This method is more sandbox-friendly and also should be faster as only
one syscall is needed instead of three.
In case of an error fall back to the old method.
Reviewed by: simon, gleb
MFC after: 2 weeks
The function isascii_l() is not in POSIX even though isascii() is,
probably because isascii() is marked as obsolete. The other functions,
like digittoint_l() and ishexnumber_l(), are FreeBSD-specific just like
their non-_l versions.
When building libelf in the bootstrap stage this would include the tree
versions of, for example, sys/_types.h. This would work as long as the
tree's version of this file was close enough to the system's version of
the file. If, however, there was a change in the tree such that the location
of a typedef was moved this would cause problems. In this case the version
of sys/_types.h in the tree no longer defines __wchar_t and expects it to
to be defined in machine/_types.h, however we pick up machine/_types.h from
the system and find it is not defined there. The solution is to restrict the
parts of sys er include from the tree to those that are needed.
This fixes the recent Tinderbox failure.
Pointy Hat to: andrew
Our libedit has been diverging from the mainstream version
maintained in NetBSD. As a consequence it has been difficult
to do an appropriate MFV and we have been bringing only
partial updates.
Here we update most of the files to at least match the
version available in NetBSD's snapshot of 20091228. This
version was chosen because it still doesn't include wide
character support (UTF-8), which involves many changes and
new files.
From NetBSD's logs:
Dec 15 22:13:33 2006 - editline.3 el.c el.h histedit.h
add EL_GETFP, and EL_SETFP.
Apr 5 15:53:28 2008 - editline.3 el.c histedit.h readline.c
add EL_REFRESH for the benefit of readline
Sep 10 15:45:37 2008 - common.c el.c read.c refresh.c sig.c term.c term.h tty.c
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
Jan 18 12:17:24 2009 - el.c read.c readline.c
fix -Wsign-compare issues
Feb 6 14:40:32 2009 - history.c
Plug memory leak, from MySQL.
Feb 5 19:15:44 2009 - histedit.h read.c
match documentation in el_push
Feb 6 13:14:37 2009 - vi.c
Portability fix.
Feb 12 13:39:49 2009 - readline.c term.c
More fixes for existing portability stuff.
Feb 15 21:24:13 2009 - el.h read.c
don't restart on EINTR, instead return NULL immediately. From Anon Ymous
Feb 15 21:25:01 2009 - sig.c sig.h
in order for read() to return EINTR we need to use sigaction, not signal,
otherwise SA_RESTART is set.
Feb 15 21:55:23 2009 - chared.c chared.h common.c emacs.c filecomplete.c
filecomplete.h key.c key.h read.c readline.c refresh.c search.c
term.c tokenizer.c tty.c vi.c
pass lint on _LP64.
Feb 17 21:34:26 2009 - el.c histedit.h prompt.c prompt.h
allow for a prompt argument.
Feb 18 15:04:40 2009 - sig.c
SA_RESTART for all signals but SIGINT. From Anon Ymous.
Feb 19 15:20:22 2009 - read.c sig.c sig.h
reset and redraw on sigcont. From Anon Ymous.
Feb 21 23:31:56 2009 - key.c key.h readline.c vi.c
more size_t stuff.
Mar 10 20:46:15 2009 - editline.3 read.c
make el_gets set the count to -1 on error to distinguish between EOF and
error.
Mar 31 17:38:27 2009 - editline.3 el.c histedit.h prompt.c prompt.h
refresh.c term.c term.h
Implement literal prompt sequences. Now someone can implement
RL_PROMPT_START_LITERAL/RL_PROMPT_END_LITERAL :-)
Mar 31 21:33:17 2009 - term.c
cast to size_t to avoid sign / unsigned comparison warning.
Apr 23 02:03 2009 - term.c
Apply patch (requested by msaitoh in ticket #2007):
Coverity CID 1668: Plug memory leak when malloc() failed.:55 2009
May 11 18:33:30 2009 - editline.3 el.c histedit.h
restore binary compatibility by providing new prompt functions that take
an extra literal character.
May 19 21:45:14 2009 - refresh.c
always scroll when we advance past bottom. From Caleb Welton
cwelton at greenplum dot com.
Jul 17 12:27:57 2009 - term.c
- off by one in the term.h case.
- make code more similar to tcsh (if we want to handle wide chars, this is
needed; for now it is a no-op)
Jul 22 15:56:29 2009 - el.c
Move filename to the scope it is being used.
From Michael Cook mcook at bbn dot com
Jul 22 15:57:00 2009 - read.c
Always initialize nread since it is an out param.
From Michael Cook mcook at bbn dot com
Jul 22 18:25:26 2009 - el.c
Only need path if we have issetugid... From Anon Ymous
Jul 25 21:19:23 2009 - el.c
Ignore comment lines in .editrc from Jess Thrysoee
Sep 7 21:24:33 2009
histedit.h history.c readline.c
apply apple patches from:
http://opensource.apple.com/source/libedit/libedit-11/patches/
Dec 28 21:52:43 2009 - refresh.c
Fix bug where tab completion on the second or > line that caused listing
ended up corrupting the display by an extra space in the beginning. Reported
by Mac Chan.
Dec 28 22:15:36 2009 - refresh.c term.c
reduce diff with tcsh
Obtained from: NetBSD
Tested by: bapt, jilles and current@
MFC after: 1 week
clock_gettime(2) functions if supported. The speedup seen in
microbenchmarks is in range 4x-7x depending on the hardware.
Only amd64 and i386 architectures are supported. Libc uses rdtsc and
kernel data to calculate current time, if enabled by kernel.
Hopefully, this code is going to migrate into vdso in some future.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
(x86 assembler optimization disabled for now because it
requires the new .cfi_* directives that is not supported
by base system binutils).
MFC after: 1 week
First, extend the changes in r230782 to better handle the common case
of using NOREUSE with sequential reads. A NOREUSE file descriptor
will now track the last implicit DONTNEED request it made as a result
of a NOREUSE read. If a subsequent NOREUSE read is adjacent to the
previous range, it will apply the DONTNEED request to the entire range
of both the previous read and the current read. The effect is that
each read of a file accessed sequentially will apply the DONTNEED
request to the entire range that has been read. This allows NOREUSE
to properly handle misaligned reads by flushing each buffer to cache
once it has been completely read.
Second, apply the same changes made to read(2) by r230782 and this
change to writes. This provides much better performance in the
sequential write case as it allows writes to still be clustered. It
also provides much better performance for misaligned writes. It does
mean that NOREUSE will be generally ineffective for non-sequential
writes as the current implementation relies on a future NOREUSE
write's implicit DONTNEED request to flush the dirty buffer from the
current write.
MFC after: 2 weeks
for example)
get the username information from old_pw structures to still allow renaming of a
user.
Reported by: Claude Buisson <clbuisson@orange.fr>
Approved by: des (mentor)
MFC after: 3 weeks
string buffer for each linelist l_line into one large string. Since
linelists parsed out during the previous passes store the pointers to
previously allocated l_lines, the reallocation caused undefined
behaviour on accessing the buffers, and quite deterministic fault on
freeing them (in mountd(8) startup).
This fixes reading of netgroup(5) file which contains more then one
netgroup.
Discussed with: ghelmer
MFC after: 3 days
which was inadvertently caused by r236185: if SHLIBDIR is set using the
?= operator, it must be done *before* bsd.own.mk is included, otherwise
the default value is still used.
Note, bsd.lib.mk will take care of removing the copy in /usr/lib upon
installation, so no addition to ObsoleteFiles.inc is needed.
X-MFC-With: r236185
thing it was still used for was to set the "global default" password
hash. Since the stock auth.conf contained nothing but comments, the
global default was actually the first algorithm in crypt(3)'s list,
which happens to be DES; I take the fact that nobody noticed as proof
that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in
in tinyware's passwd(1). I removed that code in an earlier commit;
it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL,
which has the same effect as a functional auth_getval() with an
empty auth.conf.
MFC after: 3 weeks
- Use CLOCK_MONOTONIC instead of CLOCK_REALTIME, because CLOCK_MONOTONIC
does not wrap into negative in near future. This fixes any potential
problems using "pthread_cond_timedwait()".
- Fix a bug where the "libusb_wait_for_event()" function computes an
absolute timeout instead of a relative timeout. USB transfers do
not depend on this timeout value.
- Add dependency towards LibPthread to Makefile, because LibUSB v1.0
needs this library to function correctly.
MFC after: 1 week
http://austingroupbugs.net/view.php?id=385#c713
(Resolved state) recommend this way for the current standard (called
"earlier" in the text)
"However, earlier versions of this standard did not require this, and the
same example had to be written as:
// buf was obtained by malloc(buflen)
ret = write(fd, buf, buflen);
if (ret < 0) {
int save = errno;
free(buf);
errno = save;
return ret;
}
"
from feedback I have for previous commit it seems that many people prefer
to avoid mass code change needed for current standard compliance
and prefer to track unpublished standard instead, which requires now
that free() itself must save errno, not its usage code.
So, I back out "save errno across free()" part of previous commit,
and will fill PR for changing free() isntead.
2) Remove now unused serrno.
MFC after: 1 week
"The setting of errno after a successful call to a function is
unspecified unless the description of that function specifies that
errno shall not be modified."
However, free() in IEEE Std 1003.1-2008 does not mention its interaction
with errno, so MAY modify it after successful call
(it depends on particular free() implementation, OS-specific, etc.).
So, save errno across free() calls to make code portable and
POSIX-conformant.
2) Remove unused serrno assignment.
MFC after: 1 week
The stat structures returned on pipes seems to contain all the
information required by POSIX. Especially the wording "and thus to a
pipe" makes little sense, because it seems to imply a certain
relationship between sockets and pipes that simply isn't there.
MFC after: 2 weeks
(not verified by me to be accurate)
PR: bin/163847
Submitted by: Gabor Fischer <Gabor.Fischer@gmx.net>
Reviewed by: bp
Approved by: cperciva
MFC after: 3 weeks
this fflush may fail to write data in the buffer.
PR: kern/137819
Submitted by: Eric Blake <ebb9@byu.net>
Reviewed by: theraven
Approved by: cperciva
MFC after: 2 weeks
Feature Change
* BIND now recognizes the TLSA resource record type, created to
support IETF DANE (DNS-based Authentication of Named Entities)
Bug Fix
* The locking strategy around the handling of iterative queries
has been tuned to reduce unnecessary contention in a multi-
threaded environment.
Other critical bug fixes are included.
All BIND users are encouraged to upgrade.
To avoid unexpected process termination from SIGPIPE when writing to a
closed network connection, enable SO_NOSIGPIPE on all network connections.
The POSIX standard MSG_NOSIGNAL is not used since it requires modifying all
send calls to add this flag. This is particularly nasty for SSL connections.
Reviewed by: des
Tested by: bapt
MFC after: 5 days
function. The purpose of the __eabi() function is to set up the
runtime and is called first thing by main(). The runtime is already
set up for us prior to caling main, so there's nothing to do for
us in the EABI case.
avoid creating bad entries in the grp list as a result of memory allocation
failures while building new entries.
PR: bin/83340
Reviewed by: delphij (prior version of patch)
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
