RTM_CHANGE if the RTM_ADD fails with an EEXIST.
Allow "delete! dst" (note the ``!'') to silently
fail if the RTM_DELETE fails with an ESRCH.
Also, make the ESRCH and EEXIST error conditions
more understandable to the casual observer.
interrupted with a SIGALRM. In fact, select() sets the
passed time to zero, making the previous implementation
terminate always after 1/10th of a second !
Also, deal with someone changing the clock while we're
sleeping (and restart the whole sleep).
Dangers pointed out by: Theo de Raadt <deraadt@cvs.openbsd.org>
When CCP is originally negotiated, the only thing we can be
sure about is that we've started adding data to the inflate
dictionary either before or at the same time as the peer. This
is ok, 'cos DEFLATE is a `sliding window' compressor.
Show the IP range (if specified) in "show ipcp".
Close unused descriptors 0 and 2 in interactive mode.
Pass (size_t *) rather than (int *) to sysctl().
Don't read(fd, buffer, 0) and think ppp has closed the
connection when `buffer' is full, instead, flush most of
buffer to the terminal and read() for a reasonable length.
This fixes "show route" when there's more than 2k of
routing output.
Based on the report from Dave Bodenstab.
- Turn off PnP COM device enumeration procedure if the user explicitly
specifies a protocol type with the "-t" option.
- Accept "-t auto". Now the user may entirely omit the "-t" option
in the command line, or specify "-t auto" in order to make moused
detect an appropriate protocol type automatically. In the
previous version, moused did so only if the "-t" option is absent
in the command line. ("-t auto" won't disable PnP COM device
enumeration.)
- Updated the man page.
strcpy(a, b); /* a and b are the same size */
with
strncpy(a, b, sizeof(a));
a[sizeof(a)-1] = '\0';
Making the code `correct at a glance'.
Suggested by: Theo de Raadt <deraadt@cvs.openbsd.org>
Disallow connections from port numbers <1024 as low port numbers
can only really mean trouble (ftp bounces etc.).
Discussed at length with: Theo de Raadt <deraadt@cvs.openbsd.org>
fd_set, make sure that all descriptors >2 are closed
when we start - otherwise we're asking for a dump in
FD_SET().
Problem pointed out by: Theo de Raadt <deraadt@cvs.openbsd.org>
when command logging is switched on.
o Display ******** for the authkey for "show auth"
o Document how \P should be used, and document the other chat escapes
while I'm there.
o Make sure the full command is displayed when a compound command
fails - ie, "set novar rubbish" should say "set novar: Invalid command"
rather than "novar: Invalid command"
Problem pointed out by: Theo de Raadt <deraadt@cvs.openbsd.org> (among others)
GCC suppresses the warning for ``standard'' header files, but since the
headers do not come from the ``standard'' place in a ``make world'', GCC
doesn't get it.
etc., so that (this part of) `LIBOWN=... make world' can be run by users
other than root. Actually, use BINOWN instead of LIBOWN, since the files
that we install in /usr/libdata are not libraries, and LIBOWN is not
used for anything else in /usr/libdata.
Rewrote all the rules and cleaned up.
etc., so that (this part of) `LIBOWN=... make world' can be run by users
other than root. Actually, BINOWN instead of LIBOWN, since fonts are not
libraries. Only one owner of (non-setuid) installed files is really
supported.
line is > LINE_LEN (512 bytes), we scribble (*blush*).
Hinted at by: Theo de Raadt <deraadt@cvs.openbsd.org>
Change sprintf(buf, "fixedstring") to strcpy(buf, "fixedstring").
all RTF_WASCLONED routes, and the second removes the
others. This avoids the situation where we've added an
RTF_CLONING route (such as ``default''), created some
clones, then deleted the CLONING route before the
WASCLONED route(s). Without the two passes, we get
errno (not rtm_errno) set to ESRCH when deleting the
WASCLONED route, despite the deletion succeeding !
Also:
Enhance the route operation failure diagnostics.
Make portability #ifdefs a bit more generic.
change from
ioctl(fd, PIOC<foo>, &i);
to
ioctl(fd, PIOC<foo>, i);
This is going from the _IOW to _IO ioctl macro. The kernel, procctl, and
truss must be in synch for it all to work (not doing so will get errors about
inappropriate ioctl's, fortunately). Hopefully I didn't forget anything :).
Validate the peers suggested IP by attempting to make a routing table
entry.
Give up IPCP negotiation if the peer NAKs us with an unusable IP.
Always SIOCDIFADDR then SIOCAIFADDR when configuring the tun device.
Using SIOCSIFDSTADDR allows duplicate dst addresses (which we don't
want)!!!
Allow up to 200 interface names (was 50) (now that ppp can play server
properly).
Up the version number (1.5 -> 1.6).
Cosmetic:
Log unexpected CCP packets in the CCP log rather than the ERROR log.
Log unexpected Config Reqs in the appropriate LCP/IPCP/CCP log rather
than the ERROR log.
Log failed route additions and deletions with WARN, not TCPIP.
Log the option id and length for unrecognised IPCP options.
Change some .Sq to .Ar in the man page.
Changed lots of %ld's in format strings back to %d. %ld was right
when daddr_t was long, but Lite2 changed daddr_t to int32_t which
is implemented as `int' on i386's.
We must call inflate again in case there's any pending output
despite our input buffer being empty. If the output buffer
is in fact already flushed, inflate() returns Z_BUF_ERROR.
There isn't really an error !
since we only store CIS_MAXSTR data, and the users may stick the
'entire' CIS string returned from the card in /etc/pccard.conf and
cause the comparison to (bogusly) fail.
Submitted by: Brad Karp <karp@eecs.harvard.edu>
I did the deflate re-org).
Make PAP & CHAP negotiation prettier in the log file.
If both PAP & CHAP are `enabled' and the peer NAKs CHAP
suggesting PAP, be friendly and REQ PAP the next time.
This is in line with the rfc.
protocols to recognized extra buttons and wheel/roller. It now has
PnP COM device support code, thus, some recent mouse products are
automatically detected and an appropriate protocol is selected.
The `-i' option will print the result of auto-detection.
- Added support for the following SERIAL mice:
ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse
(Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+,
FirstMouse+ are compatible with MS IntelliMouse, when connected
to a serial port, thus requires no explicit support)
- Added PnP serial mouse identification capability as defined
by Microsoft and Hayes in "Plug and Play External COM Device
Specification, rev 1.00". This support will enable us to identify
the correct protocol to use, or choose a compatible protocol for the
given mouse.
- Utilize new ioctls defined in `mouse.h' to get hardware and protocol
information on PS/2 and bus mouse devices. Try to guess the correct
protocol and port combination based on the obtained info.
- Use MOUSE_SETLEVEL ioctl.
- Use constants defined in `mouse.h' rather than using own definitions.
- A New command line option. The -i option prints the information
collected though the PnP code and psm/mse ioctls mentioned above,
and just quits. This is to test `moused's ability, or inability, to
detect the correct protocol for the given mouse automatically.
- A new command line option. The -m option maps a physical button
to a logical button.
- A new command line option. The -z option maps the Z axis movement to
another axis or a pair of buttons.
- Add other options: -3, -C -F -P.
- Added a handler for SIGHUP. This has been suggested by somebody in the
past (I don't remember who). He wanted this because he wants to attach
or detach a mouse while his laptop is suspended. Now `moused' will
reopens and reinitialize the specified port whenever a SIGHUP is
received. I don't know how useful this can be...
Delete AF_LINK routes as well as AF_INET.
Allow the word `default' as the arg to `delete' or in place of the
first two args (dest & netmask) to `add'.
Accept INTERFACE as the third arg to `add'.
You can now say `add default interface' to create a default route
through the tun interface. It's reported that subsequent bind()s
will bind to a broadcast address and not to the address currently
assigned to the tun device - this is the first step towards
supporting that first connection that was around from before the
dynamic IP negotiation....
instead of htonl() !
This results in the int a,b,c,d changing to b,a,c,d,
but as it's subsequently coerced to a u_short, the
ultimate answer is correct.
If this isn't fixed properly soon (by the author) I'll
have a look at it again.
Noted by: eivind & ari@suutari.iki.fi
(I *really* meant to do this *before* committing the
deflate changes in the first place - oops).
Pppd is horribly broken in this respect - refer to the
ppp man page for details. Ppp *WON'T* negotiate deflate
with pppd by default - you must ``enable'' and ``accept''
``pppd-deflate'' in your config.
While I'm in there, update the cftypes in ccp.c so that
we recognise some more protocols (we don't actually do
anything with them - just send a REJ).
- Get rid of a lot of the static variables which were shared by
many routines and programs in the suite.
- Create an abstract interface to the printcap database, so that
other retrieval and iteration mechanisms could be developed
(e.g., YP, Hesiod, or automatic retrieval from a trusted server).
- Give each capability a human-readable name in addition to the historic
two-character one.
- Otherwise generally clean up a lot of dark corners. Many still remain.
- When submitting jobs, use the official login name record (from getlogin())
if there is one, rather than reverse-mapping the uid.
More to come...
break each ruleset into identified sections. (called groups).
note which groups can be reordered.
each group accepts and returns the same strings,
as much as possible.
reactivate Paul Vixie's RBL (in check_mail)
add rules to limit mail relaying to a list of hosts and domains
in the R class (check_rcpt, not active on hub.freebsd.org)
Submitted by: jmb
instead Do The Right Thing when the kernel states a card was
inserted/removed. This isn't a complete fix, but better than nothing.
Reviewed by: Guido van Rooij <guido@gvr.org>
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.
We can now survive a compile with
-Wall -Wbad-function-cast -Wcast-align -Wcast-qual
-Winline -Wmissing-declarations -Wmissing-prototypes
-Wnested-externs -Wpointer-arith -Wredundant-decls
-Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
Remove the timeout hack to notice that ppp has closed the connection.
Remove the ``special case'' hacks for "quit" and "bye", as pppctl
now exits immediately when the connection is closed by ppp.
Suggest a secure "set server" line for connecting ppp & pppctl.
Tidy up and correct a few man page typos.
avoids the situation where we specify label ``x'' on the command
line, and label ``x'' has a ``load y'' command embedded in it.
When the line comes up, we want to use ``x'' from ppp.linkup,
not ``y''.
allowing for a possible header on the front of all packets.
In OpenBSD, there's a structure containing the address
family here.
If we're building under OpenBSD, set up the ``flags'' part
of struct tuninfo (not there under FreeBSD) so that we config
the interface as POINTOPOINT.
Prefix prototypes with ``extern'' in os.c for consistency.
These changes are cosmetic under FreeBSD, but allow ppp to
build & work under OpenBSD (bar the srandomdev() stuff,
the inclusing of <net/if_var.h> and some Makefile symantecs).
Print out inteface names rather than numbers, and use the
same "find out the names" code in SetIfAddr(). This means
that the nasty ioctl(,SIOCGIFCONF,)/realloc loop is now
buried :-)
