in the case of a file system with a block size that is less than the page
size, cluster_rbuild() looks at too many of the page's valid bits.
Consequently, it may terminate prematurely, resulting in poor performance.
Reported by: bde
Reviewed by: tegge
Approved by: re (kib)
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
required by video card drivers. Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures. In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.
In collaboration with: jhb
Specifically, if a non-root user attempts to bind an interrupt the request
will now report failure with EPERM rather than silently failing with a
successful return code.
MFC after: 1 week
offset of the stat is not known until link time so we must emit a
function to call SYSCTL_ADD_PROC rather than using SYSCTL_PROC
directly.
- Eliminate the atomic from SCHED_STAT_INC now that it's using per-cpu
variables. Sched stats are always incremented while we're holding
a spinlock so no further protection is required.
Reviewed by: sam
additional privileges as well as not restricting the type of
sockets a user can open.
Note: the VIMAGE/vnet fetaure of of jails is still considered
experimental and cannot guarantee that privileged users
can be kept imprisoned if enabled.
Reviewed by: rwatson
Approved by: bz (mentor)
- The uid/cuid members of struct ipc_perm are now uid_t instead of unsigned
short.
- The gid/cgid members of struct ipc_perm are now gid_t instead of unsigned
short.
- The mode member of struct ipc_perm is now mode_t instead of unsigned short
(this is merely a style bug).
- The rather dubious padding fields for ABI compat with SV/I386 have been
removed from struct msqid_ds and struct semid_ds.
- The shm_segsz member of struct shmid_ds is now a size_t instead of an
int. This removes the need for the shm_bsegsz member in struct
shmid_kernel and should allow for complete support of SYSV SHM regions
>= 2GB.
- The shm_nattch member of struct shmid_ds is now an int instead of a
short.
- The shm_internal member of struct shmid_ds is now gone. The internal
VM object pointer for SHM regions has been moved into struct
shmid_kernel.
- The existing __semctl(), msgctl(), and shmctl() system call entries are
now marked COMPAT7 and new versions of those system calls which support
the new ABI are now present.
- The new system calls are assigned to the FBSD-1.1 version in libc. The
FBSD-1.0 symbols in libc now refer to the old COMPAT7 system calls.
- A simplistic framework for tagging system calls with compatibility
symbol versions has been added to libc. Version tags are added to
system calls by adding an appropriate __sym_compat() entry to
src/lib/libc/incldue/compat.h. [1]
PR: kern/16195 kern/113218 bin/129855
Reviewed by: arch@, rwatson
Discussed with: kan, kib [1]
them under COMPAT_FREEBSD[4567]. Starting with FreeBSD 5.0 the SYSV IPC
API was implemented via direct system calls (e.g. msgctl(), msgget(), etc.)
rather than indirecting through the var-args *sys() system calls. The
shmsys() system call was already effectively deprecated for all but
COMPAT_FREEBSD4 already as its implementation for the !COMPAT_FREEBSD4 case
was to simply invoke nosys().
- Modules and kernel code alike may use DPCPU_DEFINE(),
DPCPU_GET(), DPCPU_SET(), etc. akin to the statically defined
PCPU_*. Requires only one extra instruction more than PCPU_* and is
virtually the same as __thread for builtin and much faster for shared
objects. DPCPU variables can be initialized when defined.
- Modules are supported by relocating the module's per-cpu linker set
over space reserved in the kernel. Modules may fail to load if there
is insufficient space available.
- Track space available for modules with a one-off extent allocator.
Free may block for memory to allocate space for an extent.
Reviewed by: jhb, rwatson, kan, sam, grehan, marius, marcel, stas
The advantage of using a separate condvar is that we can just use
cv_signal(9) instead of cv_broadcast(9). It makes no sense to wake up
multiple threads. It also makes the TTY code easier to understand.
t_dcdwait sounds totally unrelated.
I suspect the usage of bgwait causes a lot of spurious wakeups when
threads are blocked in the background, because they will be woken up
each time a write() call is performed.
Also wakeup dcdwait when the TTY is abandoned.
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
stream (TCP) sockets.
It is functionally identical to generic soreceive() but has a
number stream specific optimizations:
o does only one sockbuf unlock/lock per receive independent of
the length of data to be moved into the uio compared to
soreceive() which unlocks/locks per *mbuf*.
o uses m_mbuftouio() instead of its own copy(out) variant.
o much more compact code flow as a large number of special
cases is removed.
o much improved reability.
It offers significantly reduced CPU usage and lock contention
when receiving fast TCP streams. Additional gains are obtained
when the receiving application is using SO_RCVLOWAT to batch up
some data before a read (and wakeup) is done.
This function was written by "reverse engineering" and is not
just a stripped down variant of soreceive().
It is not yet enabled by default on TCP sockets. Instead it is
commented out in the protocol initialization in tcp_usrreq.c
until more widespread testing has been done.
Testers, especially with 10GigE gear, are welcome.
MFP4: r164817 //depot/user/andre/soreceive_stream/
long mbuf chain into an arbitrary large uio in a single step.
It is a functional mirror image of m_uiotombuf().
This function is supposed to be used instead of hand rolled code
with the same purpose and to concentrate it into one place for
potential further optimization or hardware assistance.
chains) to pure data mbufs using m_demote(). This removes the
packet header and all m_tag information as they are not meaningful
anymore on a stream socket where mbufs are linked through m->m_next.
Strictly speaking a packet header can be only ever valid on the first
mbuf in an m_next chain.
sbcompress() was doing this already when the mbuf chain layout lent
itself to it (e.g. header splitting or merge-append), just not
consistently.
This frees resources at socket buffer append time instead of at
sbdrop_internal() time after data has been read from the socket.
For MAC the per packet information has done its duty and during
socket buffer appending the policy of the socket itself takes over.
With the append the packet boundaries disappear naturally and with
it any context that was based on it. None of the residual information
from mbuf headers in the socket buffer on stream sockets was looked at.
- remove HT_HEADER test (MT_HEADER == MT_DATA for some time now)
- be more pedantic about m_nextpkt in other than first mbuf
- update m_flags to be retained
vn_open_cred in default implementation. Valid struct ucred is needed for
audit and MAC, and curthread credentials may be wrong.
This further requires modifying the interface of vn_fullpath(9), but it
is out of scope of this change.
Reviewed by: rwatson
vn_open_cred invocations shall not audit namei path.
In particular, specify VN_OPEN_NOAUDIT for dotdot lookup performed by
default implementation of vop_vptocnp, and for the open done for core
file. vn_fullpath is called from the audit code, and vn_open there need
to disable audit to avoid infinite recursion. Core file is created on
return to user mode, that, in particular, happens during syscall return.
The creation of the core file is audited by direct calls, and we do not
want to overwrite audit information for syscall.
Reported, reviewed and tested by: rwatson
Now that we start to use credentials on character devices more often
(because of MPSAFE TTY), move the prison-checks that are in place in the
TTY code into devfs.
Instead of strictly comparing the prisons, use the more common
prison_check() function to compare credentials. This means that
pseudo-terminals are only visible in devfs by processes within the same
jail and parent jails.
Even though regular users in parent jails can now interact with
pseudo-terminals from child jails, this seems to be the right approach.
These processes are also capable of interacting with the jailed
processes anyway, through signals for example.
Reviewed by: kib, rwatson (older version)
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
Instead of locking the local unp followed by the remote unp, use the same
locking model as accept() and read lock the global link lock followed by
the remote unp while fetching the remote sockaddr.
Reported by: Mel Flynn mel.flynn of mailing.thruhere.net
Reviewed by: rwatson
MFC after: 1 week
allocator for the jumbo frames zones. This change has two benefits: (1) a
custom back-end deallocator is no longer required. UMA's standard
deallocator suffices. (2) It eliminates a potentially confusing artifact
of using contigmalloc(): The malloc(9) statistics contain bogus information
about the usage of jumbo frames. Specifically, the malloc(9) statistics
report all jumbo frames in use whereas the UMA zone statistics report the
"truth" about the number in use vs. the number free.
in the type field of system call tables. Specifically, one can now use
the 'NO*' types as flags in addition to the 'COMPAT*' types. For example,
to tag 'COMPAT*' system calls as living in a KLD via NOSTD. The COMPAT*
type is required to be listed first in this case.
- Add new functions 'type()' and 'flag()' to the embedded awk script in
makesyscalls.sh that return true if a requested flag is found in the
type field ($3). The flag() function checks all of the flags in the
field, but type() only checks the first flag. type() is meant to be
used in the top-level "switch" statement and flag() should be used
otherwise.
- Retire the CPT_NOA type, it is now replaced with "COMPAT|NOARGS" using
the flags approach.
- Tweak the comment descriptions of COMPAT[46] system calls so that they
say "freebsd[46] foo" rather than "old foo".
- Document the COMPAT6 type.
- Sync comments in compat32 syscall table with the master table.
- Mark nfsclnt as UNIMPL. It should have been NOSTD instead of NOIMPL back
when it lived in nfsclient.ko, but it was removed from that a long time
ago.
