ZFS already commits outstanding data every zfs_txg_timeout seconds, so these
syncs are unnecessarily intrusive.
Submitted by: gibbs
Sponsored by: Spectra Logic
MFSpectraBSD: 1105759 on 2014/12/11
Since allow_mounted is a FreeBSD-specific change, default to B_TRUE, then
locally check for the magic bit. Unconditionally check allow_mounted below.
Convert the setting of allow_mounted to an explicit boolean.
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 672578 (in part) on 2013/07/19
This is primarily for developer/debugging use; it enables built-in tagged
tracking of refcounts inside ZFS. It can only be enabled from the loader,
since it modifies how in-core state is managed. Default remains disabled.
MFC after: 1 week
Sponsored by: Spectra Logic
Remove the unnecessary #ifdef _KERNEL, which did not differ in the true or
false cases. Actually set the value of to_free before using it.
MFC after: 1 week
Sponsored by: Spectra Logic
dsl_dir_transfer_space() is mostly called after dsl_dir_diduse_space(),
which already calls dmu_buf_will_dirty() for the same dbuf and tx, so
its duplicate call in those cases will change nothing, only spend time.
Skipping this call by four times reduces time spent in dbuf_write_done()
and descendants, updating dataset statistics with several congested lock
acquisitions. When rewriting 8K zvol blocks at 1GB/s rate, this reduces
CPU time spent inside dbuf_write_done(), according to profiling, from 45%
of 683K samples to 18% of 422K.
MFC after: 2 weeks
A number of entries that can be present in the spa config shouldn't be saved
to disk so add a method to ensure this is case. Without this if the last
caller to vdev_config_generate requested stats then we can end up in the
cache file.
Also only skip a none writable pool in the cache file generation if its
active. This prevents unavailable pools incorrectly getting removed from
cache file.
Tested by: delphij
MFC after: 2 weeks
Sponsored by: Multiplay
Since the upstream for cddl code is now illumos not sun, mechanically
convert all sun #ifdef's to illumos #ifdef's which have been used in all
newer code for some time.
Also do a manual pass to correct the use if #ifdef comments as per style(9)
as well as few uses of #if defined(__FreeBSD__) vs #ifndef illumos.
MFC after: 1 month
Sponsored by: Multiplay
Previous throttling implementation approached problem from the wrong side.
It significantly limited useful delaying of TRIM requests and aggregation
potential, while not so much controlled TRIM burstiness under heavy load.
With this change random 4K write benchmarks (probably the worst case for
TRIM) show me IOPS increase by 20%, average latency reduction by 30%, peak
TRIM bursts reduction by 3 times and same peak TRIM map size (memory usage).
Also the new logic does not force map size down so heavily, really allowing
to keep deleted data for 32 TXG or 30 seconds under moderate load. It was
practically impossible with old throttling logic, which pushed map down to
only 64 segments.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
New segment at the list head may block all TRIM requests until txg of that
segment can be processed. On my random I/O tests this change reduce peak
TRIM list length from 650 to 450 segments. Hopefully it should reduce TRIM
burstiness when list processing is unblocked.
MFC after: 2 weeks
On FreeBSD gethrtime() implemented via getnanouptime(), that has 1ms (1/hz)
precision. It makes primary sort key (timestamp) collision very possible.
In such situations sorting by secondary key of LBA is much more reasonable
then by totally meaningless zio pointer value.
With this change on multi-threaded synchronous ZVOL read I've measured 10%
throughput increase and average latency reduction.
MFC after: 2 weeks
When pools are unavailable their vdevs are also unavailable which means
that vdev_max_asize remains at the default zero. This default was being
used to calculate vs_esize resulting in a negative number as vdev_asize >
vdev_max_asize, which caused zpool list -v to display 16.0E for EXPANDSZ
of these vdevs.
It's redundant at the moment since it can be obtained from the trapframe
on the architectures where DTrace is supported, but this won't be the case
with ARM.
Resizing a ZFS ZVOL with debug enabled would result in a panic due to
recursion on dp_config_rwlock.
The upstream change "3464 zfs synctask code needs restructuring" changed
zvol_set_volsize to avoid the recursion on dp_config_rwlock, but this was
missed when originally merged in by r248571 due to significant differences
in our codebases in this area.
These changes also relied on bring in changes from upstream:
3557 dumpvp_size is not updated correctly when a dump zvol's size is
changed, which where also not present.
In order to help prevent future issues in this area a direct comparison
and diff minimisation from current upstream version (b515258) of zvol.c.
Differential Revision: https://reviews.freebsd.org/D1302
MFC after: 1 month
X-MFC-With: r276063 & r276066
Sponsored by: Multiplay
Use #define zfsdev_state_lock spa_namespace_lock instead of replacing all
zfsdev_state_lock with spa_namespace_lock to minimise changes from upstream.
Differential Revision: D1302
MFC after: 1 month
X-MFC-With r276063
Sponsored by: Multiplay
Also correct as per style(9) on the use of #ifdef comments.
This is a no-op change as pre-cursor to a full cleanup and merge with
upstream zvol changes.
Sponsored by: Multiplay
kernel does not panic with zfs_panic_recover.
Illumos issue:
5438 zfs_blkptr_verify should continue after zfs_panic_recover
Reported by: Coverity
CID: 1232014
As of r270383, the dbuf_compare comparator compares the dbuf
attributes in the following order:
db_level (indirect level)
db_blkid (block number)
db_state (current state)
the address of the element
Because db_state is being considered before the element's state,
changing of db_state would affect balancedness of the AVL tree,
even when the address of element compares differently. For
instance, in dbuf_create, db_state may be altered after the
node is inserted into the AVL tree and may break AVL tree
balancedness.
Instead of using db_state as a comparision critera (introduced
in r270383), consider it only when we are doing a lookup, that
is one of the two dbuf pointers contains DB_SEARCH.
Illumos issue:
5422 preserve AVL invariants in dn_dbufs
MFC after: 2 weeks
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Convert ARC flags to use enum. Previously, public flags are defined in
arc.h and private flags are defined in arc.c which can lead to confusion
and programming errors.
Consistently use 'hdr' (when referencing arc_buf_hdr_t) instead of 'buf'
or 'ab' because arc_buf_t are often named 'buf' as well.
Illumos issue:
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
MFC after: 2 weeks
Remove "dbuf phys" db->db_data pointer aliases.
Use function accessors that cast db->db_data to the appropriate
"phys" type, removing the need for clients of the dmu buf user
API to keep properly typed pointer aliases to db->db_data in order
to conveniently access their data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
In zap_leaf() and zap_leaf_byteswap, now that the pointer alias
field l_phys has been removed, use the db_data field in an on
stack dmu_buf_t to point to the leaf's phys data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
Remove the db_user_data_ptr_ptr field from dbuf and all logic
to maintain it.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dbuf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dnode.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dbuf.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
Modify the DMU buf user API to remove the ability to specify
a db_data aliasing pointer (db_user_data_ptr_ptr).
cddl/contrib/opensolaris/cmd/zdb/zdb.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_diff.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_send.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_traverse.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_tx.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_bookmark.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deadlist.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_deleg.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_destroy.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_pool.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_scan.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_synctask.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_userhold.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_history.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_leaf.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zap_micro.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_ioctl.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Create and use the new "phys data" accessor functions
dsl_dir_phys(), dsl_dataset_phys(), zap_m_phys(),
zap_f_phys(), and zap_leaf_phys().
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zap_leaf.h:
Remove now unused "phys pointer" aliases to db->db_data
from clients of the DMU buf user API.
Illumos issue:
5314 Remove "dbuf phys" db->db_data pointer aliases in ZFS
MFC after: 2 weeks
In addition to r273158, make the code in spa_sync() that checks if the
current TXG is a no-op TXG less fragile.
Illumos issue:
5347 idle pool may run itself out of space
MFC after: 2 weeks
Add a loader tunable, vfs.zfs.arc_meta_min, which controls how much metadata
ZFS should keep in ARC at minimum.
In arc_evict(), when doing recycle, take more factors into account by
applying the following policy:
1. If no evictable data, evict metadata;
2. If no evictable metadata, evict data;
3. If we hit arc_meta_limit, evict metadata;
4. If we haven't hit arc_meta_min, evict data;
5* (Illumos only, not present in new FreeBSD code, yet) evict the oldest
cached element from data and metadata.
(FreeBSD) evict the data type specified by caller, which is the
existing behavior.
Note that because of our splitted locks (implemented in r205231 to improve
scalability by reducing lock contention), implementing the fifth Illumos
behavior will not be cheap, so for now just implement the 1-4 and fall back
to current behavior for 5.
Illumos issue:
5368 ARC should cache more metadata
MFC after: 2 months (assuming we didn't found better solution)
Expose arc_meta_limit, et al via kstats.
Note that as a result, vfs.zfs.arc_meta_used is removed.
The existing vfs.zfs.arc_meta_limit sysctl/tunable is retained
with a SYSCTL_PROC wrapper.
Illumos ZFS issues:
3561 arc_meta_limit should be exposed via kstats
Relnotes: yes
MFC after: 2 weeks
Verify that the block pointer is structurally valid, before attempting to
read it in. It can only be invalid in the case of a ZFS bug, but this
change will help identify such bugs in a more transparent way, by
panic'ing with a relevant message, rather than indexing off the end of an
array or something.
Illumos issue:
5349 verify that block pointer is plausible before reading
MFC after: 2 weeks
Reduce scrub activities when system there is enough dirty data, namely when
dirty data is more than zfs_vdev_async_write_active_min_dirty_percent (once
we start to increase the number of concurrent async writes).
While there also correct rounding error which would make scrub end up
pausing for (zfs_txg_timeout + 1) seconds instead of the desired
zfs_txg_timeout seconds.
Illumos issue:
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
MFC after: 2 weeks
If zio_checksum_error() returns other than ECKSUM (e.g. EINVAL), it does not
fill in the "zio_bad_cksum_t *info" parameter. Caller should not attempt to
use it in this case.
Illumos issue:
5348 zio_checksum_error() only fills in info if ECKSUM
MFC after: 2 weeks
If a dnode has a spill block and there is an error while accessing
a data block then traverse_dnode() loses information about that error
and returns a status of visiting the spill block.
This issue is discovered by Spectra Logic.
Illumos issue:
5311 traverse_dnode may report success when it should not
Original author: gibbs
MFC after: 2 weeks
When importing a pool, don't assume that the passed pool configuration
at vdev_load is always vaild. It's possible that a stale configuration
that comes with extra vdevs, where metaslab_init() would fail because
of lower layer returns error.
Change the code to make metaslab_init() handle and return errors from
lower layer and pass it back to upper layer and handle it there.
Illumos issue:
5213 panic in metaslab_init due to space_map_open returning ENXIO
MFC after: 2 weeks
In the old days callout(9) had 1 tick precision and that was inadequate
for some uses, e.g. DTrace profile module, so we had to emulate cyclic
API and behavior. Now we can directly use callout(9) in the very few
places where cyclic was used.
Differential Revision: https://reviews.freebsd.org/D1161
Reviewed by: gnn, jhb, markj
MFC after: 2 weeks
In dsl_dataset_hold_obj() we used zap_contains(.., DS_FIELD_LARGE_BLOCKS)
to determine whether the extensible (zapifyed) dataset have large blocks.
The code expects the result be either 0 (found) or ENOENT (not found),
however reused the variable 'err' which later code expects to be 0.
Fix this by adopting similar code construct that is used later for
DS_FIELD_BOOKMARK_NAMES, which uses a temporary variable zaperr to catch
errors from zap_* rountines.
Reported by: Peter J. Creath (on FreeNAS; FreeNAS bug #6848)
Illumos issue: 5393 spurious failures from dsl_dataset_hold_obj()
Reviewed by: mahrens
Sponsored by: iXsystems, Inc.
X-MFC with: r274337
It is implemented for LUNs backed by ZVOLs in "dev" mode and files.
GEOM has no such API, so for LUNs backed by raw devices all LBAs will
be reported as mapped/unknown.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
