fixed, we should be able to fully set up the user's disk. Still to come
with next commit: filesystem setup, distribution extraction, final
configuration.
may not be desired if you're just going to blow the kernel away again later)
and substitute one that tells the user where the new kernel build
directory actually IS, which can at least be argued to be useful information
in all cases.
Reviewed by: davidg
ypbind.c:
Make fewer assumtions about the state of the dom_alive and dom_broadcasting
flags in roc_received().
Cosmetic changes and paranoia checks:
ypbind.c:
Make fewer assumtions about the state of the dom_alive and dom_broadcasting
flags in roc_received().
If select() fails, use syslog() to report the error rather than perror().
Check that all our malloc()s succeed. Report malloc() failure in
ypbindproc_setdom_2() to callers.
yplib.c:
Use #defined constants in ypbinderr_string() rather than hard-coded values.
Correct Makefile so that we build during all: and only install for
make install.
If /etc/sysconfig exists source it to get the flags for restarting
named with. If /etc/sysconfig says no named runs, don't try to start one.
Don't attempt to kill anything if we can not find the named.pid file.
Reviewed by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su>
nor is it in sync with my working sources, but it leaves me less CVS hassles
to bring in the new files at this time. Still no documentation to translate
quite yet, but soon. This stuff is actually very close now.
o Make the framework generally more robust.
o Figured out how to nest the menu descriptions - no more grotty initialization
of menus.
o Fix bug with helpline and helpfile not being reset.
o Add stubs for the media selection code.
Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
Added another couple of menu item types.
Reshuffled the menus and added a few more. Sure wish I could figure out
how to initialize a menu with _one_ initializer rather than two! :(
more to come in the next 24 hours, this is just the first stable result of
8 hours of hacking so far. The specification format for menus is pretty
much hammered out and the beginnings (very humble) of the doc hierarchy
are present for an example. It should be quite easy to add a lot more
menus quickly to this since I did go somewhat out of my way to make the
framework easy to work with. This is NOT the glorious semi-graphical
sysinstall (or whatever its name will be) that the install-geeks are working
on, this is simply the "son of sysinstall" I've been promising to write in
the interim for 2.0.5 and 2.1R (super install doesn't come until 2.2R).
>Number: 368
>Category: bin
>Synopsis: Lpd doesn't log errors after failed exec
>Description:
If an exec done by lpd fails, nothing is sent to the system log
indicating what went wrong. This is because lpd closes all of
the file descriptors before doing the exec, thus closing the syslog
file descriptor in the process.
[Fix applied]
Submitted by: pritc003@maroon.tc.umn.edu
- Moved to a more client-driven model. We aggressively attempt to keep
the default domain bound (as before) but we give up on non-default
domains if we lose contact with a server and fail to get a response
after one round of broadcasting. This helps drastically reduce the
amount of network bandwitdh that ypbind consumes: if a client references
the secondary domain at some later point, this will prod ypbind into
establishing a new binding anyway, so continuously broadcasting without
need is pointless.
Note that we still actively seek out a binding for our default domain
even if no client program has queried us yet. I'm not exactly sure if
this matches SunOS's behavior or not, but I decided to do it this way
since we can get into all sorts of trouble if our default domain comes
unbound. Even so, we're still much quieter than we used to be.
- Removed a bunch of no-longer pertinent comments and a couple of
chunks of #ifdef 0'ed code that no longer fit in to the new layout.
- Theo deRaadt must have become frustrated with the callback mechanism
in clnt_broadcast(), because he shamelessly stole the clnt_broadcast()
code right out of the RPC library and hacked it up to suit his needs.
(Comments and all! :)
I can understand why: clnt_broadcast() blocks while awaiting replies.
Changing this behavior requires surgery. However, you can work around
this: fork the broadcast into a child process and relay the results
back to the parent via a pipe. (Careful obervation has shown that the
SunOS ypbind forks children for broadcasting too, though I can only
guess what sort of interprocess communication it uses. pipe() seems to
do the job well enough.)
This may seem like the long way around, but it's not really that
hard to implement, and I'd prefer to use documented RPC library functions
wherever possible. We're careful to limit the number of simultaneous
broadcasters to avoid swamping the system (the current limit is 5).
Each clnt_broadcast() call only sends out a small number of packets
at increasing intervals. We're also careful not to spawn more than one
bradcaster for a given domain.
- Used clntudp_bufcreate() and clnt_call() to implement a ping()
function for directly querying a particular server so that we can
check if it's still alive. This lets me completely remove the old
bradcasting code and use actual RPC library calls instead, at the
cost of more than a few handfulls of torn-out hair. (Make no mistake
folks: I *HATE* RPC.) Currently, the ping interval is one minute.
- Fixed another potential 'nfds too big for select()' bug: use
_rpc_dtablesize() instead of getdtablesize().
- Quieted gcc -Wall a bit.
- Probably a bunch of other stuff that I've forgotten.
ypbind.8:
- Updated man page to reflect modifications.
ypwhich.c:
- Small mind-o fix from last time: decode error results from
ypbind correctly (*groan*)
yplib.c:
- same as above
- Change behavior of _yp_dobind() a little: if we get back a 'Domain
not bound' error for a given domain, retry a few times before giving
up and passing the error back to the caller. We have to sleep for a
few seconds between tries since the 'Domain not bound' error comes
back immediately (by repeatedly looping, we end up pounding on ypbind).
We retry at most 20 times at 5 second intervals. This gives us a full
minute to get a response. This seems to deviate a bit from SunOS
behavior -- it appears to wait forever -- but I don't like the idea
of perpetually hanging inside a library call.
Note that this should fix the problems some people have with bindings
not being established fast enough at boot time; sometimes amd is started
in /etc/rc after ypbind has run but before it gets a binding set up. The
automounter gets annoyed at this and tends to exit. By pausing ther YP
calls until a binding is ready, we avoid this situation.
- Another _yp_dobind() change: if we determine that our binding files
are unlocked or nonexistent, jump directly to code that pokes ypbind
into restablishing the binding. Again, if it fails, we'll time out
eventually and return.
Also allow URL specification for a package. This works for things the
package may depend on, too.
Allow PKG_PATH to be used anywhere a package is being searched for.
1. Make paths work correctly.
2. Make pkg_add generally more robust in the face of failure.
3. Make the depend messages come out on stderr or stdout, but not both
interspersed! :-)
2. Fix a long-standing bug in pkg_add where the failure of one package in
a multipackage installation (pkg_add *.tgz) would blow you right out of
the water. Ick.
out by Bruce.
2. Add a "feature" to pkg_create (OK, OK, it's a miserable hack!) to get
it to dump its internal packing list out so that the `fake-pkg' rule in
bsd.port.mk can generate a more meaningful packing list.
ypbind.c: if a client program asks ypbind for the name of the server
for a particular domain, and there isn't a binding for that domain
available yet, ypbind needs to supply a status value along with its
failure message. Set yprespbody.ypbind_error before returning from
a ypbindproc_domain request.
yplib.c: properly handle the error status messages ypbind now has the
ability to send us. Add a ypbinderr_string() function to decode the
error values.
ypwhich.c: handle ypbind errors correctly: yperr_string() can't handle
ypbind_status messages -- use ypbinderr_string instead.
- in mount_portal.c: included catching of SIGHUP to get portald to
re-read the config file.
- in mount_portal.c: in SIGCHLD handler the return values checked from
waitpid were wrong. Note. this routine was written correclty according
to the manual page for 4.4BSD, but waitpid does not exhibit this
behaviour. It is not returning 0 when WNOHANG is specified. I havent
checked this properly.
- in mount_portal.c: initialized the fdset for the select properly.
- in mount_portal.c: corrected poor casting in the select.
- in mount_portal.c: changed a break; to exit (0); so that the
children die after doing the hard work, this stops the select: bad
file descriptor messages.
- in pt_file.c: the kernel passes kernel style open flags to the
portal code which aren't compatible with "normal" O_ flags. I have
adjusted these in pt_file.c. In general I think the portal fs code
and portal_cred structure need changing to pass to the portald
the right style of flags _and_ the permissions.
- in pt_tcp.c: a few mistakes in typing of the socket structures,
getservbyname returns the port number as an int but sockaddr wants
the port number as an u_short.
- in pt_tcp.c: someone wrote this on a VAX/Sun whatever and forget
about byte ordering!! I've included a few htons about the place.
- in all the above I have sprinkled a few more debugging printf's.
Submitted by: "Duncan McL Barclay" <dmlb@ohm.york.ac.uk
The first problem I found was that descriptor 0 was being closed.
This happens because the modem variable is set to 0 to indicate
that it is not valid but there are not enough tests for the modem
variable being 0. You can see where I have done this in the patch.
Code in OpenModem() dups the modem descriptor if it is < 3. Once
this happened the modem was always open and an incomming call would
have getty and ppp reading the modem.
Descriptor 1 is closed when the quit command was executed from a
telnet connection. The next modem open returns descriptor 1
and this gets duped leaving the modem always open again.
The modem was not being closed when the connection dropped or was
closed from the other end. The UUCP lock was also not removed if
the modem could not be opened.
Reviewed by: Atsushi Murai <amurai@spec.co.jp>
Submitted by: John Capo <jc@irbs.com>
one ypbind broadcast can yield several responses. This can lead to
some confusion: the syslog message from ypbind will indicate a rebinding
to the first server that responds, but we may subsequently change our
binding to another server when the other responses arrive. This results
in ypbind reporting 'server OK' to one address and ypwhich reporting a
binding to another.
The behavior of the rpc_received() function has been changed to prevent
this: subsequent responses received after a binding has already been
established are ignored. Rebinding gratuitously each time we get a
new response is silly anyway.
Also backed out the non-fix I made in my last ypbind commit. (Pass
me the extra large conical hat, please.)
(At some point I'm going to seriously re-work ypbind and the _yp_dobind()
library function to bring them in line with SunOS's documented behavior:
binding requests are supposed to be 'client-driven.' The _yp_dobind()
function should be responsible for retrying connections in response to
calls from client programs rather than having ypbind broadcasting
continously until a server responds. The current setup works okay in
normal operation, but we broadcast far too often than we should.)
- Don't write the label directly - use DIOCWDINFO.
- Avoid overflow in calculation of lseek() offsets.
- Fix format args in strings some more. %ld and %lu were often reversed and
#ifdefed out strings weren't fixed.
- Don't hard code the raw partition letter or DKBAD*.
- Write the qsort() comparision function in `C'.
- Fix all remaining warnings from `cc -Wall -Walmost-really-all'.
in the mrouted. inet_parse returns network byte ordered address, but there
are a couple comaprisons that need to be done on the addresses and the
comparisons are done in host order. I left the comparisions for 0xffffffff
alone, because this value is the same in network and host orders.
Submitted by: Mark Tinguely <tinguely@plains.NoDak.edu>
1. pkg_create now has a -P argument for specifying dependencies on the
command line.
2. pkg_add will honor dependencies and chain-load them automatically if
it finds the required package(s) in the same directory as the package
that is being loaded. For best results, install packages from a directory
containing all the packages you'll possibly need
(like /usr/ports/packages/all).
2 remaining flaws:
1. pkg_add looks in one place (where you were when you loaded the primary
pkg) for depended packages. If you can come up with a search path scheme
that's not a total hack - be my guest!
2. Recursive dependency expansion can result in the name of a dep being
listed more than once. This doesn't bother pkg_add since it checks
for package existance with pkg_info and will skip already-loaded packages.
I don't know how/if pkg_delete handles this yet, however. I need to look
into it.
bits) along, and rmt did the wrong thing in calling open(2) with random
garbage as third parameter. Make it create new files with 0666
(modified by the umask of the remote shell anyway).
This removed the last show-stopper from tar not working with remote
archives.
handles default settings and has a prototype translation file for people
wishing to add extra languages (please!).
Submitted by: Wolfram Schneider <wosch@cs.tu-berlin.de>
ypbind is supposed to create it but it doesn't. This is because when
it checks the return value for the attempted open() of
/var/yp/binding/DOMAIN.VERSION, it tests only for a value of -1. This
is bogus because open() doesn't return -1 in this case. Now it checks
for < 0 instead.
This should make life easier for many NIS-newbies who would otherwise
be left scratching their heads wondering why the NIS client stuff won't
work despite their best efforts. ("I set the domain name on my machine,
and /var/yp exists, but when I start ypbind and try a 'ypcat passwd,'
it says it can't bind to a server for this domain! Please help!")
*long, heavy sigh*
declaration for ether_ntohost(). (Does anyone know what header file
is supposed to contain the declarations for the ether_addr functions?
I can't them in the SunOS includes anywhere.)
you to push the same host into its NFS export lists twice, but mountd
tries to do it anyway. This means that putting:
/some_file_system -ro host1 host1
in your /etc/exports file causes an error. This is bogus: mountd should be
smart enough to ignore the second instance of host1. This can be a problem
in some configurations that use netgroups. For example, each host in my
netgroups database is has two entries:
startide (startide,-,) (startide.ctr.columbia.edu,-,)
When mountd sees this, it tries to put startide.ctr.columbia.edu into the
export list *twice*. Just listing 'startide' /etc/exports list will also
screw up because mountd will try to resolve the netgroup 'startide' instead
of the hostname 'startide.'
My solution is watch for duplicate entries in get_host() and mark them
as grouptype GT_IGNORE, which do_mount() will now cheefully throw away.
This is a bit of a kludge, but it was the least obtrusive fix I could
come up with.
Also silenced a compiler warning: arguments passwd to xdr_long() should
be u_long, not int. :)
opposed to 0644 or 0755). It's finally still masked by the process'
umask(2), and it does not make sense to restrict it further than that.
This (especially for mkdir(2)) was causing major headaches for the CVS
tree, since a member of group cvs was later not able to get cvs
checkout permission for the mirrored tree failed to write the lock file).
Note: if you put +::0:0:::::: in /etc/master.passwd as your only NIS
entry, it will cause all NIS uids and gids to be remapped to zero. This
is *intentional*. That's the way it's supposed to work. Enabling NIS with
no remapping at all is done with +:::::::::, not +::0:0::::::. Similarly,
+:::::::::/bin/csh will remap the shells of all NIS users to /bin/csh.
Or, you could do +wpaul:::::::::/bin/csh to remap NIS user wpaul's shell
to /bin/csh but leave everyone else alone.
for +@netgroup/-@netgroup entries. This saves the getpwent functions
from having to do all the work.
- Fix potential bug: when pwd_mkdb writes the YP-enabled flag to the secure
password database, it uses the wrong database descriptor. (It uses the
descriptor from the non-secure database, which is already closed by the time
things are being written into the secure dastabase).
>Description:
ctm(1) sometimes did not free up all used resources (open pipes and
processes, heap memory). This happened whenever one of the passes
ended prematurely, and it became very apparent when running it on
a bunch of already applied deltas, resulting in a ``gunzip: resource
temporarily unavailable'' due to the maxproc # exhausted.
submitting them as context diffs for the following files:
sys/netinet/ip_mroute.c
sys/netinet/ip_var.h
sys/netinet/raw_ip.c
usr.sbin/mrouted/igmp.c
usr.sbin/mrouted/prune.c
The routine rip_ip_input in raw_ip.c is suggested by Mark Tinguely
(tinguely@plains.nodak.edu). I have been running mrouted with these patches
for over a week and nothing has seemed seriously wrong. It is being run in
two places on our network as a tunnel on one and a subnet querier on the
other. The only problem I have run into is that mrouted on the tunnel must
start up last or the pruning isn't done correctly and multicast packets
flood your subnets.
Submitted by: Soochon Radee <slr@mitre.org>
2.Implment Redail function as working correctly.
3.Clean up a code as I notice.
4.Now, RTT getting close to 50ms with ISDN/TA 38400bps !!
Reviewed by: amurai@spec.co.jp
Submitted by: amurai@spec.co.jp
o less restrictive, you can choise uid, gid ...
o invite user into some groups
o encrypted passwords with crypt
o batch mode (for instance, this works now:
$ adduser -batch jkh guest,uuadmin "Jordan K. Hubbard" passwd
see manpage for more details)
Submitted by: Wolfram Schneider <wosch@cs.tu-berlin.de>
- Implement ether_hostton()
- Implement ether_aton()
- Modify ether_aton() and ether_ntoa() to match the semantics of the
SunOS versions of these functions.
- Neaten up ether_hostton() and ether_ntohost() a little.
- Get rid of ether_print() since it isn't needed for rarpd and it isn't
documented as a standard ethers(5) function.
rarpd.8:
- Make it clear that the 'ipaddr' that rarpd looks for in /tftpboot
is actually in hexadecimal (as in /tftpboot/803B4032) since those who
are not versed in the black art of system administration are not likely
to know this.
table; arptab.c is really a hacked up version of arp.c that only
supports adding temporary entries. (This stuff is nasty -- I wish I
knew what was so wrong with SIOCSARP/SIOCGARP/etc... that made the
BSD developers decide to take it out.) The idea here is that the
client issuing the rarp is expected to be in the middle of booting
and would therefore be unable to answer arp queries from other machines
on the wire. Having rarpd stuff a temporary entry for the booting
host into the local arp table helps keep arp requests from going unanswered.
Also added ether_print() and ether_ntoa() to the ether_addr.c module.
Eventually I'll get ether_aton() and ether_hostton() written and
then this file can be dropped straight into libc. (Assuming no one
objects, of course. :)
"Yes Virginia, there is a rarpd."
(Before anyone asks, this *not* the rarpd from NetBSD. It did come from
the same place as theirs, however.)
This is a port of the rarpd program included with the tcpdump-2.0
source code (which I finally unearthed after scrounging around
some of the darker corners of the Internet). It's as close to the
original as I could keep it except for the following changes:
- The original program was based on an older version of the Berkeley
Packet Filter which used different filter programming instructions.
Fortunately, an updated RARP packet filter is available right in the
BPF man page so this was easy to fix.
- The old code didn't know how to deal with variable length addresses
in ifreq buffers. This has been fixed.
- Some byte order weirdness had to be fixed. The sanity checks in
rarp_check() needed some htons()es, and the rarp_reply() function
needed to properly set the ether_type field in the ethernet header
to ETHERTYPE_REVARP before transmitting the packet, otherwise
the bytes in ether_type would wind up reversed. It is important to note
that using htons(ETHERTYPE_REVARP) will not work. This is odd, because
the NetBSD rarpd uses htons(ETHERTYPE_REVARP). (Praise be to tcpdump:
I would never have been able to track this silliness down without it.)
- The update_arptab() function has been castrated. It depends on
SIOCSARP which has been deprecated in 4.4BSD. The NetBSD people
don't seem to be using this function either. It wouldn't be too
hard to replace this with equivalent code from arp.c, but it
might not be necessary.
- I put together an ether_ntohost() support function that allows
both local (/etc/ethers) and NIS lookups. This stuff should go
in libc at some point, but nothing else seems to need it for now,
so it can wait a while.
As you may have guessed, you need to have the Berkeley Packet Filter in
your kernel in order to use this program. The good news is that together
with the recently added bootparamd, you can use finally use a FreeBSD
box to boot Sun boxes over the network. (This was my whole motivation
for getting this stuff to work: I have this one subnet that has a whole
bunch of Sun3 X-terminals on it with only two Sun4 workstations, both
of which are locked in peoples' offices. If those two machines crash
(and they do every so often) then none of the X-terms will boot. Now I
can use a spare PC that I have as a boot server. :)
thinking that it would work :( The install program never get a destination
directory. Here is another patch that should also be added. I think this
should be the last one for these makefiles :)
[Note: I realize that there are more things wrong than this, but this should
at least get the tree compiling again! -jkh]
Submitted by: John Hay <jhay@mikom.csir.co.za>
work if you don't have the obj link. Here is a patch for it. It will still
work if you don't have an obj link:)
(I stuck a ${DESTDIR} in front of the absolute path to /usr/include... /phk)
Reviewed by: phk
Submitted by: John Hay <jhay@mikom.csir.co.za>
I hope I'm doing this right.
This is an initial version of bootparamd for FreeBSD based on a public
domain rpc.bootparamd implementation by a gentleman named Klas Heggemann.
This program has apparently been around for a while. The README explicitly
lists the code as public domain, so I guess it's safe to use.
This program is needed for booting diskless SunOS and Solaris machines.
rarpd is also required, but that's in the works too.
I have made two changes to this code:
- Implemented NIS lookups. If /etc/bootparams contains a '+' then the
bootparams map is consulted.
- Allow 0.0.0.0 as a user-specified router address. The SunOS rpc.bootparamd
returns this value in many cases.
o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....
-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!
Reviewed by: Atsushi Murai (amurai@spec.co.jp)
Fixes to ypbind:
- Correctly report the fact that we've bound to a new server when
logging the 'server OK' message.
- Report 'server not responding' just once instead of every
5 seconds while searching for a new server. (Prevents overstuffing
the syslog.)
- Apply patch from Sebstian Strollo to implement '-s' (secure) flag.
ypbind will reject connections from servers that do not originate
from a reserved TCP port.
- Apply patch from Sebastian Strollo to detect when a YP server has
crashed and come back up on a different port number.
This patch fixes the concurrency problem, and adds a possibly useful -f switch
(which you can read about in the man page :-) ). It also removes the absolute
path from the invocation of ctm. I'll write a note about how to use a script
with sendmail and procmail or some such, and people can fix their PATH there.
BTW, this patch changes ctm_rmail.1, ctm_rmail.c and error.c in the ctm_rmail
directory.
Stephen.
Reviewed by: phk
Submitted by: Stephen McKay <syssgm@devetir.qld.gov.au>
I'm never going to generate one, so this is a guard against hackers mostly.
Reviewed by: phk
Submitted by: Stephen McKay <syssgm@devetir.qld.gov.au>
Obtained from:
Now I know that there was talk of moving it to the release/Makefile or the
etc/Makefile, but I don't think it was ever decided where.
Reviewed by: phk
Submitted by: John Hay <jhay@mikom.csir.co.za>
If you invoke config with the `-n' flag or have NO_CONFIG_CLOBBER in
your environment, config will behave the same way it used to. This is
now _documented_ as well. Rip out all the CONFIG_DONT_CLOBBER cruft;
some of it wasn't even correct anyway.
Removed screensavers from syscons, they are now LKM's. This makes it
possible to do some really "interesting" screensavers...
Fixed bug that sometimes caused garbage to appear when leaving
"scroll-lock" history.
Reformattet indentation, it got too deep for a normal 80 pos screen.
Split up in syscons.c & syscons.h for use with the saver-lkm's.
Temporarily removed -s option from vidcontrol, savers should now
be loaded with modload.
IP addresses and/or protocol+port, but in the case where both are
supplied, it happily accepts the command but ignores the proto+port
It also attempts to handle the case where the second IP address
is omitted, but this doesn't work.
Reviewed by: amurai@spec.co.jp
Submitted by: Andrew.Gordon@net-tel.co.uk
via sysctl(8). The initial value of maxprocperuid is maxproc-1,
that of maxfilesperproc is maxfiles (untill maxfile will disappear)
Now it is at least possible to prohibit one user opening maxfiles
-Guido
Submitted by:
Obtained from:
just thinking about it.
Two changes need to be made to allow 'config kernel swap generic' to
work properly without requiring any compile-time flags:
/usr/src/usr.sbin/config/mkswapconf.c: we need to define a dummy stub
for the setconf() function to replace the one in swapgeneric.c that
isn't available in non-generic configurations.
/usr/src/sys/i386/i386/autoconf.c: the -a boot flag causes setroot()
to be skipped and lets setconf() prompt the user for a root device.
If you skip setroot() in a non-generic kernel, you could get severely
hosed. To avoid this, we silently ignore the -a flag if rootdev != NODEV.
(rootdev is always initialized to NODEV in swapgeneric.c, so if
we find that rootdev is something other than NODEV, we know we're
not using a generic configuration.)
Support slice numbers in device names. The syntax is `<driver name>
[<unit number>] ['s' <slice number>] [<partition letter>]'. Only
`['s' <slice number>]' is new here. The slice number defaults to 0
so that there is no change in the output from config if this new
feature is not used.
Replace some magic disk numbers by `dk' slice and label macros.
mkswapconf.c:
Improve the output formatting:
Generate <> style includes.
Print minor numbers in hex so that slice numbers are easy to see and edit.
Print the rootdev and dumpdev names in comments like the swapdev names.
The existing ypbind exhibits some truly anti-social behavior. After
initially establishing a binding with an NIS server, the following events
take place:
- ypbind waits for 60 seconds before trying to broadcast a ping again
- after the 60 seconds expires, ypbind sends out broadcasts every 5 seconds
come hell or high water.
These broadcasts travel far and wide, even to NIS servers in other domains
which dutifully log the packets even though they don't respond to them.
This leads to lots of unnecessary traffic and bloated log files.
This behavior has been fixed/changed. Here's what happens now:
- We still broadcast every 5 seconds at startup, just like before.
- Once bound, we send out packets once every 60 seconds to the server
we're bound to AND NO ONE ELSE.
- If we fail to receive a reply from our server within FAIL_THRESHOLD
seconds, we assume our server has croaked and go back to broadcasting
everywhere every 5 seconds again until somebody answers. FAIL_THRESHOLD
is currently set to 20 seconds.
Other fixes/improvements:
- ypbind now logs 'server not responding' and 'server OK' messages where
appropriate.
Thanks to Thomas Graichen <graichen@omega.physik.fu-berlin.de> for
reporting the problem and guilt-tripping me into fixing it. :)
in the script. The result is the following :
203 [23:47] root@keltia:/build/cvs-1.4A2# manctl
/usr/sbin/manctl: 165: Syntax error: ";" unexpected
Here is the fix :
Submitted by: Ollivier Robert <Ollivier.Robert@keltia.frmug.fr.net>
in here that just made it a heck of a lot more confusing to maintain.
Somebody like Joerg can reality-check this at some point, when they have more
time. For now, it works.
Display update method changed, now allways write in memory buffer,
then periodically update physical display.
Speed improvements (now > 5 times faster than the old syscons).
History now circular buffer, with changeable size.
History scroll by up/down line, up/down page, home and end.
Backtab proberly implemented.
Now space for 96 function keys, 63 allocated standard, default now
SCO/SYSV compat again as in the old days.
New keyboard definition files ~share/syscons/keymaps/*
Misc fixes for old "hacks" that broke SCO/SYSV compat.
More that I forgot before writing this...
> So, the problem is hostnamebyanyaddr() assumes that _res is already
> initialized to proper values, but this is no longer true as of BIND
> 4.9.3. Here is a patch for sendmail 8.6.9 which changes
> hostnamebyanyaddr() to make sure res_init() has been called before using
> _res.retry.
Submitted by: Matt Day <mday@artisoft.com> via Terry Lambert
This command is required to exist in terms of compatibility with the
Posix 1003.2 specification. It actually invokes the lpr service with
the proper options.
