- Use 2001:db8:: as an example instead of deprecated 3ffe:: address block.
- Add check for connected routes.
- Add support of RTM_IFANNOUNCE for dyanmically-added/removed interfaces.
- Add support of *, ?, and [ in the interface list.
- Add -P number to specify route flag which will never expire.
- Add -Q number to specify route flag which route6d will add to routes via RIP.
- Add -p pidfile to specify the process ID file.
- Use queue(3) for linked-list.
- Use a consistent naming scheme for struct members.
- Use ANSI C style function declaration.
- Add check of RTM_VERSION mismatch.
There is no functional change.
userland via routing socket or sysctl. This eliminates the following
KAME-specific sin6_scope_id handling routine from each userland utility:
sin6.sin6_scope_id = ntohs(*(u_int16_t *)&sin6.sin6_addr.s6_addr[2]);
This behavior can be controlled by net.inet6.ip6.deembed_scopeid. This is
set to 1 by default (sin6_scope_id will be filled in the kernel).
Reviewed by: bz
stable/9/usr.sbin/sysinstall/help/shortcuts.hlp (reproduced below):
If /usr/sbin/sysinstall is linked to another filename, say
`/usr/local/bin/configPackages', then the basename will be used
as an implicit command name.
To get a list of modules you can link to, see `bsdconfig -h' output.
Approved by: adrian (co-mentor) (implicit)
use getopt instead of hacking on it more. This change also fixes the
method of silencing the compiler warning about gfn being used
uninitialized.
Approved by: cperciva
MFC after: 1 week
in the guest.
The variables are: smbios.bios.vendor=BHYVE and boot_serial=1
The FreeBSD guest uses the "smbios.bios.vendor" environment variable to
detect whether or not it is running as a guest inside a hypervisor.
The "boot_serial=1" is temporary and will be dropped when bhyve can do VGA
emulation.
Obtained from: NetApp
than waiting until AP bringup detects an out-of-range vCPU.
While here, fix all error output to use fprintf(stderr, ...
Reviewed by: neel
Reported by: @allanjude
Firmware tables require too much knowledge of system configuration,
and it's difficult to pass that information in general terms to a library.
The upcoming ACPI work exposed this - it will also livein bhyve.
Also, remove code specific to NetApp from the mptable name, and remove
the -n option from bhyve.
Reviewed by: neel
Obtained from: NetApp
problem with using a msgbox was one of truncation in the case of Xdialog(1)
and lack of screen real-estate (since the msgbox is not scrollable in X11
while a textbox is).
The textbox renders the text much better and is more appropriate for this
type of data display.
Approved by: adrian (co-mentor) (implicit)
requests, default to the previous 60-seconds scheduling method
unless there is any @every_second entries to conserve CPU cycles and
power.
This change also improves scheduling in the default mode by running
as close to the beginning of the minnute as possible by replacing
sleep(3) with nanosleep(2). Previously, the tasks would run anywhere
within the first second of the minute and that offset drifted back
and forth each time cron(8) was engaged.
MFC after: 1 month
Mark variables static where possible and place the uid/euid variables in
lp.h, so that we can compile-time enforce that these variables have the
same type.
current version of FreeBSD, this isn't guarenteed by the API. Custom
security modules, or future implementations of the setuid and setgid
may fail.
PR: bin/172289
PR: bin/172290
PR: bin/172291
Submittud by: Erik Cederstrand <erik@cederstrand.dk>
Discussed by: freebsd-security
Approved by: cperciva
MFC after: 1 week
current version of FreeBSD, this isn't guarenteed by the API.
Custom security modules, or future implementations of the setuid and
setgid may fail.
Submitted by: Erik Cederstrand
Approved by: cperciva
MFC after: 3 days
In addition to adding missing `static' keywords:
- bin/dd: Pull in `extern.h' to guarantee consistency with source file.
- libexec/rpc.rusersd: Move shared globals into an extern.h.
- libexec/talkd: Move `debug' and `hostname' into extern.h.
- usr.bin/cksum: Put counters in extern.h, as they are used by ckdist/mtree.
- usr.bin/m4: Move `end_result' into extern.h.
- usr.sbin/services_mkdb: Move shared globals into an extern.h.
- New memory region interface. An RB tree holds the regions,
with a last-found per-vCPU cache to deal with the common case
of repeated guest accesses to MMIO registers in the same page.
- Support memory-mapped BARs in PCI emulation.
mem.c/h - memory region interface
instruction_emul.c/h - remove old region interface.
Use gpa from EPT exit to avoid a tablewalk to
determine operand address. Determine operand size
and use when calling through to region handler.
fbsdrun.c - call into region interface on paging
exit. Distinguish between instruction emul error
and region not found
pci_emul.c/h - implement new BAR callback api.
Split BAR alloc routine into routines that
require/don't require the BAR phys address.
ioapic.c
pci_passthru.c
pci_virtio_block.c
pci_virtio_net.c
pci_uart.c - update to new BAR callback i/f
Reviewed by: neel
Obtained from: NetApp
In addition to adding `static' where possible:
- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
improve upon the system by giving the user a "Help" button instead of requiring
the user to press F1.
NOTE: In FreeBSD-9 and higher, dialog(1) does not support the F1 hook, so the
mechanism for providing help to the user had to be changed to a button.
This now means we can resurrect *.hlp files from usr.sbin/sysinstall/help/ as-
is and reusing them as-needed in bsdconfig (holding to the goal of losing as
little functionality from sysinstall as possible).
Reviewed by: adrian (co-mentor)
Approved by: adrian (co-mentor)
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
not multiple of 1 second, which results in actual time to drift back
and forth every run within 1 second of the actual action has
been set for.
Suggested by: Ian Lepore
o Schedule the first run in 1 second after starting up, not on the
boundary of the next minute, which results in the every_second jobs
not being run.
only available via the new @every_second shortcut. ENOTIME to
implement crontab(5) format extensions to allow more flexible
scheduling.
In order to address some concerns expressed by Terry Lambert
while discussing the topic few years ago, about per-second cron
possibly causing some bad effects on /etc/crontab by stat()ing
it every second instead of every minute now (i.e. atime update),
only check that database needs to be reloaded on every 60-th
loop run. This should be close enough to the current behaviour.
Add "@every_minute" shortcut while I am here.
MFC after: 1 month
execution of the nfsd threads while it is reloading the exports.
This avoids clients from getting intermittent access errors
when the exports are being reloaded non-atomically.
It is not an ideal solution, since requests will back up while
the nfsd threads are suspended. Also, when this option is used,
if mountd crashes while reloading exports, mountd will have to
be restarted to get the nfsd threads to resume execution.
This has been tested by Vincent Hoffman (vince at unsane.co.uk)
and John Hickey (jh at deterlab.net).
The nfse patch offers a more comprehensive solution for this issue.
PR: kern/9619, kern/131342
Reviewed by: kib
MFC after: 2 weeks
Teach the dot module about the new location these includes moved to (as part
of r240684) and clean things up a bit.
Reviewed by: adrian (co-mentor)
Approved by: adrian (co-mentor)
impossible to use LQR/ECHO. They return want_magic instead.
With this change it is now possible to use
enable lqr
set lqrperiod 5
enable echo
set echoperiod 5
in your ppp.conf file.
MFC after: 3 days
reference a missing dependency rather than a missing compile command.
- Don't append a newline to the auto-generated compile command. The
compile command has a newline appended when it is later output to the
Makefile.
MFC after: 2 weeks
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
doesn't mean supporting IFT_PFSYNC (which I hope will eventually
die). This means decoding packets with IP protocol of 240 caught
on any normal interface like Ethernet.
The code is based on couple of files from OpenBSD, significantly
modified by myself.
Parser differentiates for four levels of verbosity: no -v, -v,
-vv and -vvv.
We don't yet forward this code upstream, because currently it
strongly relies on if_pfsync.h and even on pfvar.h. I hope that
this can be fixed in future.
Reviewed by: gnn, delphij
For -p:
The localtime update should have been excluded in the first place
The make.conf comparison has been OBE for some time now, and there
is no src.conf equivalent to share/examples/make.conf, so remove
the whole thing.
Update copyright
address associated with the guest memory segment. This is because there is
no longer a 1:1 mapping between GPA and HPA.
As a result 'vmmctl' can only display the guest physical address and the
length of the lowmem and highmem segments.
disconnected under the WITH_BSDCONFIG flag (a good idea since this version of
sysrc(8) indeed requires the `sysrc.subr' module installed by bsdconfig(8)).
Multiple reasons sysrc should not simply continue to live in ports. The most
important being that it is tightly coupled with the base.
Approved by: adrian (co-mentor)
"clean-room" environment used to query rc.conf(5) parameters.
This brings bsdconfig(8)'s sysrc.subr in-line with both the sysrc(8) manual
[provided by sysutils/sysrc] and sysrc(8)'s own sysrc.subr (now identical to
bsdconfig(8)'s sysrc.subr as of this patch).
Finally, this will allow a clean import of sysutils/sysrc (sans sysrc.subr,
already provided here).
Reviewed by: jilles
Approved by: adrian (co-mentor)
AP needs to be activated by spinning up an execution context for it.
The local apic emulation is now completely done in the hypervisor and it will
detect writes to the ICR_LO register that try to bring up the AP. In response
to such writes it will return to userspace with an exit code of SPINUP_AP.
Reviewed by: grehan
entries with different security flavors are in the exports(5)
file. For that case, mountd replies with the security flavors
of the last entry and not the correct one for the client host.
This patch fixes that by storing separate copies of the flavors
for each host/net case, plus a default one for the case where
no hosts/nets are specified on an entry in the exports(5) file.
Unlike the patch in the PR, it replies with the security flavors
for the entry instead of merging the security flavors for all
the entries and replying with that.
Tested by: attila.bogar at linguamatics.com
PR: kern/164933
MFC after: 2 weeks
umsX character device returns a read error. Update devd.conf rules
to use "DEVFS" events which are generated after that the umsX
character device node has been created/destroyed, and then there
should be no need for moused to wait up to 10 seconds for umsX to
be ready. Opening umsX should not fail except if the kernel is low
on memory. In that case the user can replug the USB mouse or use
"usbconfig" to reset the device. In case of USB mouse devices,
moused should neither retry to open its character device,
once the first read error has happened. This is an indication
of device detach.
MFC after: 1 week
builtin is processed specially and thus the `: > file' syntax for example
will cause premature termination of the current shell on redirection-error.
The `true' builtin on the other-hand is not included in this special
processing (for compatibility reasons to satisfy legacy scripts programmed
for systems where `true' is not a builtin).
Change bare `: > file' syntax into `true > file' syntax to prevent premature
shell termination in the event of redirection-error.
NOTE: Instances of `: > file' that appear within a sub-shell have been left
unmodified as these will not cause premature termination of the main script.
Reviewed by: jilles, adrian (co-mentor)
Approved by: adrian (co-mentor)
our embedded rescue environment to support /dev/null making r240770 obsolete.
Reviewed by: jilles, adrian (co-mentor)
Approved by: jilles, adrian (co-mentor)
pkg info -g returns 1 if a file mismatch [2]
flush stdout in pkg info -g [3]
clean up quiet mode (-q | --quiet) output of pkg_version(1) [4]
fix missing error call in uname check added to pkg_version(1) [5]
fix pkg_add(1) fails to install with -C from bad path [6]
only resolve path from pkg_add(1) -p if the given prefix do not start with a '/' [7]
PR: bin/13128 [1]
bin/139015 [2]
bin/113702 [3]
bin/142570 [4]
bin/146857 [5]
bin/157543 [6]
Submitted by: cy [1]
Anton Yuzhaninov <citrin@citrin.ru> [2]
Ighighi <ighighi@gmail.com> [3]
"N.J. Mann" <njm@njm.me.uk> [4]
gcooper [5]
David Naylor <naylor.b.david@gmail.com> [6]
netchild [7]
MFC after: 2 weeks
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.
This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g
When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.
Discussed with: jhb
MFC after: 1 week
indexing. When a device has gone it is not removed from device_map
table but just its entry_p field is set to NULL.
So when traversing device_map in disk_OS_get_ATA_disks() and
disk_OS_get_MD_disks() check for entry_p being NULL, otherwise the
bsnmpd crash is possible when a removed map entry is dereferenced.
Before the fix, for disk_OS_get_ATA_disks() the crash could be easily
reproduced running:
atacontrol detach ata1
The crash was not observed in disk_OS_get_MD_disks() because currently
snmp_hostres does no see md(4) disks: to get the device list it uses
devinfo(3), which does not return md devices.
Reported by: Miroslav Lachman 000.fbsd quip.cz
MFC after: 1 week
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
its contents are created with pkg_add(1). It may happen when the packing
list contains @owner, @group, or @mode.
Reported by: Donald Bostrom (dbostrom at niksun dot com)
Reviewed by: portmgr (bapt)
- Make parsing of PCI-e extended capabilities assume that future version
numbers are backwards compatible.
- Add new AER error descriptions.
- Add descriptions for more PCI-e extended capabilities.
MFC after: 1 week
Fix a bug installing components from a localPath.
Allow autosizing of any partition, not just the last partition.
Adjust how ZFS is laid out to work with Boot Environments.
Submitted by: kmoore
Obtained from: PC-BSD
MFC after: 3 days
with multicast bit set. FreeBSD refuses to install such
entries since 9.0, and this broke installations running
Microsoft NLB, which are violating standards.
Tested by: Tarasov Oleg <oleg_tarasov sg-tea.com>
