update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
unmount, which causes error from nmount(2) call when performing
MNT_DELEXPORT over the directory which ceased to be a mount point.
The race is legitimate and innocent, but results in the chatty mountd.
Silence it by providing an distinguished error code for the situation,
and ignoring the error in mountd loop.
Based on the patch by: Andreas Longwitz <longwitz@incore.de>
Prodded and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This change introduces new target option "port", that assigns current target
to specified CTL port. On config application ctld(8) will apply LUN mapping
according to target configuration to specified port and bring the port up.
On shutdown cltd(8) will remove the mapping and put the port down.
This change allows to configure both iSCSI and FibreChannel targets in the
same configuration file in alike way.
Kernel side support was added earlier at r278037.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This is required to prevent problems with nss modules that use libthr when
upgrading from releases prior to 10.1.
PR: 197366
Sponsored by: DARPA, AFRL
Differential Revision: D1790
Reviewed by: cperciva
MFC after: 3 days
target iSCSI offload. Add mechanism to query maximum receive data segment
size supported by chosen hardware offload module, and use it in ctld(8)
to determine the value to advertise to the other side.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This change allows multiple "portal-group" options to be specified per
target. Each of them may include new optional auth-group name parameter
to override per-target auth parameters for specific portal group.
Kernel side support was added earlier at r278161.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
continues to work with newer kernel.
Other ctladm(8) "*list" subcommands seem to already handle it in
a reasonable way.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
flag value is already exposed via dv_flags, just not the meaning of the
flags themselves. Use these constants to annotate devices that are
disabled or suspended in devinfo output.
usr.sbin/syslogd/syslogd.c:1023:10: error: address of array 'f->f_prevline' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
f->f_prevline && !strcmp(msg, f->f_prevline) &&
~~~^~~~~~~~~~
usr.sbin/syslogd/syslogd.c:1178:16: error: address of array 'f->f_prevline' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
} else if (f->f_prevline) {
~~ ~~~^~~~~~~~~~
In both cases, the f_prevline field of struct filed is a char array, so
it can never be null. Remove the checks.
Reviewed by: jilles
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1716
initiator iSCSI offload. Pass maximum data segment size supported by
chosen offload module to iscsid(8), and make iscsid(8) not try to negotiate
anything larger than that.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
While ctld(8) still does not allow multiple portal groups per target
to be configured, kernel should now be able to handle it.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
assume that GPT means UEFI boot, resulting in the installation of
uninstallable systems. This needs a little more work before MFC, in
particular based on disk size (> 2 TB + BIOS + MBR is not workable). That
will come soon.
This option allows for specifying the directory to use as the location for
kernel source files. This option was ported from NetBSD.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/18
Submitted by: Steve Kiernan <stevek@juniper.net>, Simon Gerraty <sjg@juniper.net>
Obtained from: Juniper Networks, Inc.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D1722
Relnotes: yes
usr.sbin/ppp/command.c:2054:74: error: address of array 'arg->bundle->radius.cfg.file'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (arg->bundle->radius.alive.interval && !arg->bundle->radius.cfg.file) {
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
In all cases, the file field of struct radius is a char array, but the
intent was to check whether the string is empty, so add an indirection
to achieve that. Use a similar approach for the sockname field of
struct server.
usr.sbin/pciconf/pciconf.c:237:12: error: address of array 'p->pd_name' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
(p->pd_name && *p->pd_name) ? p->pd_name :
~~~^~~~~~~ ~~
usr.sbin/pciconf/pciconf.c:239:12: error: address of array 'p->pd_name' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
(p->pd_name && *p->pd_name) ? (int)p->pd_unit :
~~~^~~~~~~ ~~
The pd_name field of struct pci_conf is an array, so it can never be null.
Remove the unnecessary check.
uid and gid are never and should never be negative. The pw(8) manpage clearly
states the -u and -g arguments are for uids/gids, hence using negative values is
abusing a bug in former versions of pw(8)
