Assuming that the autoboot sequence was interrupted, we've done enough
cursor manipulation that the prompt for the password will be sufficiently
obscured a couple of lines up. Clear the screen and reset the cursor
position here, too.
MFC after: 1 week
This was previously an unconditional screen clear, regardless of whether or
not we would be prompting for any passwords. This is pointless, given that
the screen clear is only there to put our screen into a consistent state
before we draw the prompts and do cursor manipulation.
This is also the only screen clear besides that to draw the menu. One can
now see early pre-loader and loader output with the menu disabled, which may
be useful for diagnostics.
Reported by: ian
MFC after: 3 days
The previous iteration of try_include attempted to be 'friendly' and error()
out if we hit an error that wasn't ENOENT. This was semi-OK, but fragile as
it relied on pattern matching the error message.
Move the responsibility for handling failure to the caller. Following
a common lua pattern, we'll return the return value of the underlying
require() on success, or false and an error message.
Reported by: bcran
MFC after: 3 days
If module_blacklist isn't specified, we have an empty blacklist; effectively
the same as if module_blacklist="" were specified in loader.conf(5).
This was reported when switching to a BE that predated the module_blacklist
introduction, but the problem is valid all the same and likely to be tripped
over in other scenarios.
Reported by: bwidawsk
MFC after: 3 days
Some fixes:
- Maintain historical behavior more accurately w.r.t verbose_loading;
verbose_loading strictly prints "${module_name...}" and later "failed!"
or "ok" based on load success
- With or without verbose_loading, dump command_errbuf on load failure.
This usually happens prior to ok/failed if we're verbose_loading
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17694
Currently, a timeout in the menu autoboot sequence would effectively do
nothing. We would return from the autoboot handling, then begin processing
the menu without redrawing it.
This change makes the behavior a little more friendly. Returning the user to
the menu can't have any good effects, so abort the autoboot sequence and
drop to the loader prompt.
MFC after: 3 days
In the majority of cases, a kernel is not loaded before we hit the menu.
However, if a password is set, we'll trigger autoboot and have loadelf'd
beforehand. We also need to take into account one dropping to the loader
prompt and twiddling with things manually; if they try to toggle through
kernels, we'll assume they mean it.
Reported by: trasz
MFC after: 3 days
For non-UEFI systems, boot.config(5) may have -s or -v specified for
single-user and verbose boot respectively. These were not being properly
taken into account and reflected in the "Boot Options" submenu. When we
initialize core.lua, we'll record boot_single and boot_verbose as we do ACPI
and consider these the system defaults.
Reported by: David Wolfskill <david@catwhisker.org>
Approved by: re (kib)
This is a step in the process of easing migration into the new world order
of DRM drivers. Strongly encourage users towards loading DRM modules via
rc.conf(5) instead of loader.conf(5) by failing the load from loader(8).
Users so inclined may wipe out the blacklist via module_blacklist="" in
loader.conf(5), and it is expected that these modules will eventually be
removed from the blacklist. They may still be loaded as dependencies of
other modules or explicitly via the loader prompt, but this should not be a
major problem.
Approved by: re (rgrimes)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16914
This was mostly a cosmetic issue. autoboot_delay=-1 is documented to bypass
the loader menu and immediately execute the boot command, but lualoader
would draw the menu and immediately execute the boot command. No interaction
was possible with the menu.
The fix lifts autoboot_delay processing out of menu.autoboot, which now
takes a delay and does nothing if no delay is specified. This lines up with
my expectations of menu.autoboot's usage from a third party, which may
want more control over the process than the default behavior.
PR: 231610
Approved by: re (gjb)
1. Be clear about which password is being requested
2. Remove extraneous whitespace between the prompt and the cursor
3. Move the twiddle to where the prompt is, instead of two characters to the right
4. Fix erasing the 'incorrect password' message when retrying; previously it was erased partially
5. Remove the unneeded exclamation mark
Reviewed by: kevans
Approved by: re (gjb)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17236
The format for kernels is documented as being space-delimited, but
forthloader was more lenient on this and so people began to depend on it.
A later pass will be made to document all of the fun features that forthloader
allowed that may not be immediately obvious.
Reported by: mmacy
Approved by: re (kib)
Resetting to the default color scheme was done prior to reading the config.
This is bogus; colors may only be declined by the user with the
loader.conf(5) variable "loader_color", so such a request for no color will
not be completely honored as we reset to the default color scheme
unconditionally.
Approved by: re (rgrimes)
Earlier changes setup a config.module_path variable that was populated upon
reading of loader.conf(5) and used for restoring module_path to pristine
condition if multiple kernels are attempted. This broke the ability to
override module_path at the loader prompt in case of emergency.
Approved by: re (rgrimes)
While loader.conf(5) suggests that all values should be quoted, reality is
that this was never strictly enforced and it is used. We already make some
concession to this in number values, which aren't strictly quoted either.
The compromise here is that multi-word values must be quoted. This lets
things like `foo_load=YES` work, while denying more complex expressions on
the right hand side. This likely catches the vast majority of current usage.
A bit of a kludge is needed to accomplish this since Lua regex doesn't
support branching. I had considered splitting up expressions and generating
the right-hand side of the expressions completely in config.parse, but
deemed this too large of an overhaul to take given the current timing. This
should be re-worked shortly after the thaw.
Reported by: royger
lualoader was not respecting the 'xen_kernel' environment variable, which
hints to the interpreter that it should load a Xen kernel prior to loading
any other kernel that might be specified. If a Xen kernel is specified and
we fail to load it, we should not proceed to boot.
Reported by: royger
Tested by: royger
This includes some light rework to simplify the line parsing, as well. If
we hit a line match, we'll always either use the line and move on to the
next line, or we'll spew out malformed line errors.
We had multiple spots to output the error and set the status based on
whether we had a non-nil first capture group or failed EOL validation, but
it was always the same error. Light rework entails a small label jump to
skip error handling and elimination of 'found' local.
A couple of issues addressed:
1.) Modules with - in the name were not recognized as modules
2.) The module regex was repeated for each place a module name may appear
3.) The 'strip leading space' bits were repeated for each expression
4.) The trailing 'comment validation' stuff was repeated every expression
#4 still has some more work to be done. exec lines, for instance, don't
capture a 'value' -- there's only one capture pattern. This throws off the
'c' value that we match, so the trailing bits aren't *actually* being
validated. This isn't a new issue, though, so a future comit will address
this.
Remove a bunch of special cases for UEFI and serial consoles. We do
want to do curses and menu things here. This makes us match what we do
in FORTH, with the possible exception of boxes around menus.
Differential Revision: https://reviews.freebsd.org/D16816
Now that a complete set is written, save for one describing loader.lua,
install all of them. This was not previously done as they were written to
hopefully avoid confusion as bits and pieces of the overall system were
undocumented.
Uncovered while writing the documentation from this, we previously
explicitly fell back to orb or orbbw if an invalid or incompatible logodef
was selected -- in contrast to branddefs, which have an exported variable
that one can whip up a quick local.lua to override in a safe manner that
works regardless of whether or not loader.conf(5) successfully loads.
These are less controversial than the others, thus done in a separate
commit. These are all used internally and ways to override are provided via
soon-to-be-documented API or loader.conf(5) variables.
Ideally, all of the functionality to revamp the loader screen has associated
APIs that are flexible enough that third-party scripts wouldn't need to
override these.
Remove all cross references to zfsloader.8 and /boot/zfsloader.
Move ZFS specific info into loader.8.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
To recap the problem: with a black-on-white xterm, the menu draws terribly.
Ideally, we would try our best for a white-on-black context for the menu
since graphics and whatnot might not be tested for other setups and there's
no reasonable way to sample the terminal at this point for the used color
scheme.
This commit attempts to address that further in two ways:
- Instead of issuing CSI bg/fg resets (CSI 39m and CSI 49m respectively for
"default"), issue CSI bg/fg escape sequences for our expected color scheme
- Reset to *our* default color scheme before we even attempt to load the
local module, so that we personally don't have any earlier text with the
console default color scheme.
Reported by: emaste (again)
dteske@, I believe, had originally pointed out that lualoader failed to
allow logo-*.lua for new logos to be added. When correcting this mistake, I
failed to do the same for brands.
Correct the sub-mistake: creating new brands is almost identical to creating
new logos, except one must use `drawer.addBrand` and 'graphic' is the only
valid key for a branddef at the moment.
While here, I've added `drawer.default_brand` to be set to name of brand to
be used (e.g. 'fbsd', project default).
Eventually this whole goolash will be documented.
Reported by: kmoore, iXsystems
We support both of the following cases of substitution:
bar="y"
foo="${bar}"
foo="$bar"
The latter substitution syntax is, of course, not recommended- all
punctuation must be considered potential variable names, and we do not go
through the effort of searching the different combinations of, for instance,
"$x.y.z" to determine if the variable is $x, $x.y, or $x.y.z.
This is not officially documented as supported, but it has worked in
forthloader for what is most likely a long time as `evaluate` is used to
process the right hand side of the assignment.
loader.conf(5) documents loader_conf_files to mean "additional configuration
files to be processed right after the present file." However, lualoader
ignored loader_conf_files after processing /boot/defaults/loader.conf.
Rewrite these bits to process loader_conf_files after each loaded file.
This will not be executed on reload, though later work could allow for that.
It's intended/expected that later work won't generally need to happen on
every config load, just once (for, e.g., menu initialization) or just when
config is reloaded but not upon the initial load.
Earlier efforts to stop loading the menu broke the ability to skip the menu
with, e.g., beastie_disable in loader.conf(5) as it was decided before
configuration was read.
Defer bringing in the menu module until we've loaded configuration so that
we can make a more informed decision on whether the menu should be skipped
or not.
This commit splits all of the logodefs/graphics out into their own own files
and provides a method for these files to register their logodefs with the
drawer. Graphics are now loaded on demand if they don't exist in the current
set of logodefs.
The drawer module becomes a little easier to navigate through without all of
the graphics mixed in. It's also easy to do one-off graphics like the
9.2 Die Hard tribute by dteske@ without adding even more to our memory
requirements.
- No need for a 'goto' when our entire loop body is then wrapped in a
conditional.
- No need to leave commented out prints laying around
- If an expression is clearly going to be either nil or an expression that
isn't likely to be a boolean, we might as well use `or` to specify a
default value for the expression. e.g. `loader.getenv(...) or "no"`
