Even though jail is part of the base system, it can be disabled by src.conf
settings. Therefore, it should be listed as a required program for tests
that use it.
CR: D603
MFC after: 3 days
Sponsored by: Spectra Logic
The new code uses a "test discovery mechanism" to determine
what tests are available for execution
The test shell can be specified via:
kyua test -v test_suites.FreeBSD.bin.sh.test_shell=/path/to/test/sh
Sponsored by: EMC / Isilon Storage Division
Approved by: jmmv (mentor)
Reviewed by: jilles (maintainer)
One problem is inferior(9) looping due to the process tree becoming a
graph instead of tree if the parent is traced by child. Another issue
is due to the use of p_oppid to restore the original parent/child
relationship, because real parent could already exited and its pid
reused (noted by mjg).
Add the function proc_realparent(9), which calculates the parent for
given process. It uses the flag P_TREE_FIRST_ORPHAN to detect the head
element of the p_orphan list and than stepping back to its container
to find the parent process. If the parent has already exited, the
init(8) is returned.
Move the P_ORPHAN and the new helper flag from the p_flag* to new
p_treeflag field of struct proc, which is protected by proctree lock
instead of proc lock, since the orphans relationship is managed under
the proctree_lock already.
The remaining uses of p_oppid in ptrace(PT_DETACH) and process
reapping are replaced by proc_realparent(9).
Phabric: D417
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
Currently, there can be no more than INT_MAX positional parameters. Make
sure to treat all higher ones as unset to avoid incorrect results and
crashes.
On 64-bit systems, our atoi() takes the low 32 bits of the strtol() and
sign-extends them.
On 32-bit systems, the call to atoi() returned INT_MAX for too high values
and there is not enough address space for so many positional parameters, so
there was no issue.
Although it is probably unwise to use this, POSIX is clear that leading
zeroes are permitted in positional parameters (and do not indicate octal).
Such positional parameters are checked for being unset and/or null
correctly, but their value is incorrectly expanded.
The test locale1.0 depends on locale support; it is meaningless without a
working LC_MESSAGES.
I added an OptionalObsoleteFiles.inc entry.
PR: 181151
Submitted by: Garrett Cooper (original version)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
fflag to ignore fts_read errors, but stop deleting from that directory
because no further progress can be made.
When building a kernel with a high -j value on a high core count
machine, during the cleanobj phase we can wind up doing multiple rm
-rf at the same time for modules that have subdirectories. This
exposed this race (sometimes) as fts_read can return an error if the
directory is removed by another rm -rf. Since the intent of the -f
flag was to ignore errors, even if this was a bug in fts_read, we
should ignore the error like we've been instructed to do.
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
When getopts finds an invalid option or a missing option-argument, it should
not reset its state and should set OPTIND as normal. This is an old ash bug
that was fixed long ago in dash. Our behaviour now matches most other
shells.
* Don't use sysexits.h. Just exit 1 on error and 0 otherwise.
* Don't sacrifice precision by converting the output of clock_gettime() to a
double and then comparing the results. Instead, subtract the values of
the two clock_gettime() calls, then convert to double.
* Don't use CLOCK_MONOTONIC_PRECISE. It's an unportable synonym for
CLOCK_MONOTONIC.
* Use more appropriate names for some local variables.
* In the summary message, round elapsed time to the nearest microsecond.
Reported by: bde, jilles
MFC after: 3 days
X-MFC-With: 265472
conv=sparse.
This change fixes two separate issues observed when the last output
block is all zeroes, and conv=sparse is in use. In this case, care
must be taken to roll back the last seek and write the entire last zero
block at the original offset where it should have occurred: when the
destination file is a block device, it is not possible to roll back
by just one character as the write would then not be properly aligned.
Furthermore, the buffer used to write this last all-zeroes block
needs to be properly zeroed-out. This was not the case previously,
resulting in a junk data byte appearing instead of a zero in the
output stream.
PR: bin/189174
PR: bin/189284
Reviewed by: kib
MFC after: 2 weeks
gettimeofday returns the system clock, which may jump forward or back,
especially if NTP is in use. If the time jumps backwards, then dd will see
negative elapsed time, round it up to 1usec, and print an absurdly fast
transfer rate.
The solution is to use clock_gettime(2) with CLOCK_MONOTONIC_PRECISE as the
clock_id. That clock advances steadily, regardless of changes to the system
clock.
Reviewed by: delphij
MFC after: 3 days
Sponsored by: Spectra Logic
As stated in the man page, this is equivalent to use "%a, %d %b %Y %T %z"
as the output format while LC_TIME is set to the "C" locale.
This is compatible with date(1) from the GNU core utilities.
From the original OpenBSD commit message:
restore the traditional behavior of -f implying -a; apparently Keith
Bostic forgot to restore it when the -f flag was put back on 2nd of
September 1989, after being removed on 16th of August as a
consequence of issues getting it working over NFS, so deviation from
traditional UNIX behavior in all BSDs looks like an historical
accident; as a side effect, this change accommodates behavior of
this option to IEEE Std 1003.1-2008 (``POSIX.1'').
joint work with jmc@ (who found the inaccuracy in our
implementation), schwarze@ (who provided a detailed tracking of
historical facts) and millert@
Submitted by: Igor Sobrado
Discussed with: mckusick
Obtained from: OpenBSD project
MFC after: 2 weeks
borrowed where syntax status=noxfer means no transfer statistics
and status=none means no status information at all.
This feature is useful because the statistics information can
sometimes be annoying, and redirecting stderr to /dev/null would
mean error messages also gets silenced.
Obtained from: OpenBSD
MFC after: 2 weeks
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
Only store exit status for a process if that process has not terminated yet.
Test (slow):
exit 7 & p1=$!; until exit 8 & p2=$!; [ "$p1" = "$p2" ]; do wait "$p2";
done; sleep 0.1; wait %1; echo $?
should write "7".
