1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
Commit Graph

4235 Commits

Author SHA1 Message Date
Dima Dorfman
b5f6d74386 Unbreak the ipfilter_loaded function. There doesn't seem to be a way
for kldstat to ever print "IP Filter" (the module is called "ipfilter"
and modules don't have anything like a description), so this function
would always return false. That would cause prestart to attempt to
load the module even if it's already loaded, which would fail and
prevent the rules from being loaded.

Approved by:	re (dwhite)
2005-06-21 09:39:09 +00:00
Brooks Davis
d873676af6 Make sure we actually read the config files before testing values from
them.

Reported by:	Darren Pilgrim <dmp at bitfreak dot org>
PR:		conf/82313
Approved by:	re (network interface startup blanket)
2005-06-16 18:08:04 +00:00
Dejan Lesjak
f44873531a Move couple of directories out of mtree and into their respective
ports. This mtree now specifies basic structure of X11BASE, similarly
to BSD.local.dist.

No objections on: freebsd-x11@
Approved by:	re (dwhite), portmgr
2005-06-15 02:27:41 +00:00
Gregory Neil Shapiro
18e370c342 Use new OSTYPE(freebsd6).
Approved by:	re (scottl)
Requested by:	keramida
2005-06-14 02:25:17 +00:00
Marius Strobl
9a472268c8 - In preparation to turning syscons(4) etc. on by default in the sparc64
GENERIC comment in ttyN.
- Add the name of the device driver creating the device nodes above the
  respectives blocks so it's easier for user to find the right entry to
  shut up warnings from getty(8). Replace 'Requires device 'uart' be
  enabled.' with just 'uart(4)' as the former referred to a sparc64
  GENERIC back when uart(4) wasn't enabled by default, yet.
- Turn off the getty(8) on screen as screen is created by ofw_console(4)
  which is no longer enabled in the sparc64 GENERIC (and also only is a
  last resort) to shut up warnings from getty(8) with the current GENERIC.
2005-06-10 23:06:14 +00:00
Jacques Vidrine
a8e0b2e8ab Remove rexecd(8), a server that implements a particularly insecure
method of executing commands remotely.  There are no rexec clients in
the FreeBSD tree, and the client function rexec(3) is present only in
libcompat.  It has been documented as "obsolete" since 4.3BSD, and its
use has been discouraged in the man page for over 10 years.
2005-06-10 20:52:36 +00:00
Andrey A. Chernov
8c31c2a9db Back out "rw" locale addition for reason unknown to me (forced by portmgr) 2005-06-10 20:14:38 +00:00
Andrey A. Chernov
e5cc8496e3 Add locale/rw 2005-06-10 11:24:30 +00:00
Joseph Koshy
f263522a45 MFP4:
- Implement sampling modes and logging support in hwpmc(4).

- Separate MI and MD parts of hwpmc(4) and allow sharing of
  PMC implementations across different architectures.
  Add support for P4 (EMT64) style PMCs to the amd64 code.

- New pmcstat(8) options: -E (exit time counts) -W (counts
  every context switch), -R (print log file).

- pmc(3) API changes, improve our ability to keep ABI compatibility
  in the future.  Add more 'alias' names for commonly used events.

- bug fixes & documentation.
2005-06-09 19:45:09 +00:00
Brooks Davis
1e03bb0312 Remove default and documenation for pccard_ether_delay since I removed
it from /etc/pccard_ether.

Submitted by:	Jeremie Le Hen <jeremie at le-hen dot org>
2005-06-08 00:05:58 +00:00
Brooks Davis
cbac4adce6 Fix return values of ifconfig_up/down.
Reported by:	Andrea Campi
2005-06-07 23:59:45 +00:00
Dag-Erling Smørgrav
cad530b9d3 Change the default for dumpdev to "AUTO". It should be reverted to "NO"
on RELENG_* branches.
2005-06-07 15:22:08 +00:00
Dag-Erling Smørgrav
f07bf52735 Honor the "dumpdev" kenv variable if it is set and the "dumpdev" rc
variable is set to "AUTO".

MFC after:	2 weeks
2005-06-07 15:20:10 +00:00
Brooks Davis
8e9e71f817 Support code for the OpenBSD dhclient. This significantly changes the
way interfaces are configured.  Some key points:

  - At startup, all interfaces are configured through /etc/rc.d/netif.
  - ifconfig_<if> variables my now mix real ifconfig commands the with
    DHCP and WPA directives.  For example, this allows media
    configuration prior to running dhclient.
  - /etc/rc.d/dhclient is not run at startup except by netif to start
    dhclient on specific interfaces.
  - /etc/pccard_ether calls "/etc/rc.d/netif start <if>" to do most of
    it's work.
  - /etc/pccard_ether no longer takes additional arguments to pass to
    ifconfig.  Instead, ifconfig_<if> variables are now honored in favor
    of pccard_ifconfig when available.
  - /etc/pccard_ether will only run on interfaces specified in
    removable_interfaces, even if pccard_ifconfig is set.
2005-06-07 04:49:12 +00:00
Maxim Konovalov
8cdcfdf3ab Finish adding _dhcp user. 2005-06-07 03:41:20 +00:00
Brooks Davis
7217408a65 Add _dhcp user/group as required by the OpenBSD dhclient. 2005-06-06 20:19:56 +00:00
David E. O'Brien
737840187b Remove RCng files that were brought in from NetBSD, but we ended up not
using them (or did and no longer do).
2005-06-06 02:51:26 +00:00
Marius Strobl
91ee05e122 Add esp(4) to scsi-controller-regex.
MFC after:	1 month
2005-06-04 21:05:37 +00:00
Robert Watson
c64e9e6833 Add /etc/security, into which the BSM audit configuration files will be
installed.  This is the same directory as found on Solaris.

NB: In FreeBSD 4.x and earlier, a script (file) named /etc/security
exists.  Does mergemaster need to be taught how to replace a file with
a directory?

Submitted by:	wsalamon
Obtained from:	TrustedBSD Project
2005-05-30 20:51:13 +00:00
Robert Watson
19fb720da7 Add /usr/include/bsm to mtree creation set.
Submitted by:	wsalamon
Obtained from:	TrustedBSD Project
2005-05-29 16:18:29 +00:00
Maxim Sobolev
61a20ce696 Add cdce(4) into the list of ethernet interfaces. 2005-05-23 16:23:28 +00:00
Pawel Jakub Dawidek
8f5aed3be4 We need to use 'applyset' command for devfs, 'apply hide' is not enough,
because new devfs entries can show up later and one can access such entires
from inside named chroot.
In rc.d scripts we can use devfs_domount() function with devfsrules_hide_all
policy and unhide 'null' and 'random' manually.
2005-05-23 12:25:33 +00:00
Jens Schweikhardt
e67132b9ed Style: mostly tabs vs blanks, and semicolon placement. 2005-05-22 16:22:23 +00:00
Joe Marcus Clarke
0749600611 Add libdata/pkgconfig. It is used under ${LOCALBASE} as much (if not more)
than under ${X11BASE}.

Discussed with:	portmgr
MFC after:	1 day
2005-05-13 04:06:04 +00:00
Brian Somers
709acd0300 Run /etc/rc.d/syscons restart when a usb keyboard is attached so that the
keymap and other settings are correct.
2005-05-11 10:24:20 +00:00
Christian S.J. Peron
115005468b Do not unconditionally mount devfs to ${jail_devdir}/dev. First check
to see if a prior devfs has been mounted. If no devfs is mounted on
${jail_devdir}/dev then proceed. This will prevent the stack up of
multiple devfs mounts on the same mount point.

Discussed with:	pjd
MFC after:	1 week
2005-04-30 00:16:00 +00:00
Brooks Davis
2af94c5d1d To allow /etc to be as minimal as possible in a diskless setup, we need
to run initdiskless before we run rcorder on /etc/rc.d.  To allow this,
move /etc/rc.d/initdiskless to /etc/rc.initdiskless and run it directly
from /etc/rc.

Remove /etc/rc.d/preseedrandom as it is no longer necessicary (we start
with entropy unblocked) and was only used by initdiskless when it
was needed.

Discussed on:	freebsd-rc
Repocopy by:	peter
2005-04-29 23:02:56 +00:00
Dag-Erling Smørgrav
394fc87351 X logins should be recorded in lastlog / wtmp / utmp. I have no idea why
this wasn't there already...  it makes much more sense this way.

MFC after:	2 weeks
2005-04-28 07:59:09 +00:00
Doug Barton
65db76c1aa Add -h to the ln command to make the -f flag actually do something.
Without this flag, if the symlink existed already a new symlink would
be created in the source directory. While harmless if the two symlinks
were the same, it nonetheless caused pointless confusion.

The pathological case is that when there is an existing /etc/namedb
symlink, but named_chrootdir in rc.conf pointed to a different
directory, it was the symlink in /var/named that was getting
updated, not the one in /etc. This led to some difficult to diagnose
problems for users.
2005-04-24 01:51:22 +00:00
Gleb Smirnoff
8d6e44f80f Add startup script and default configuration file for bsnmpd.
Reviewed by:	harti
2005-04-17 10:47:58 +00:00
Christian S.J. Peron
99a6b61d70 Do not remove logging sockets. This fixes an issue where logging
sockets placed into prisons from the host environment get clobbered
by the prison's instance of cleanvar. (assuming /etc/rc is run in
the prison).

Discussed with:	pjd, green, cperciva
MFC after:	1 week
2005-04-14 03:56:06 +00:00
Thomas Quinot
a5562a139a Document that dumpdev may be set to AUTO to dump to the first appropriate
swap device listed in /etc/fstab.
2005-04-12 15:21:51 +00:00
Doug Barton
f297a20e30 The alternative suggested for /entropy as a shutdown
save file was /var/db/entropy, which also happens to
be the directory where the individual entropy files
created by /usr/libexec/save-entropy are stored.
Change the suggestion to be /var/db/entropy-file
instead.

In an error condition where the shutdown file is not
created, the error message accessed a variable that
doesn't exist.

PR:		conf/75722
Submitted by:	Nicolas Rachinsky <list@rachinsky.de>
2005-04-11 02:45:05 +00:00
Nate Lawson
0a133d67f3 Set CPU speed to 100% in acpi_throttle attach. This is needed for some
systems that boot with this value at the lowest setting.  Change the
default boot config back to "leave frequency as BIOS set it".  Also, fix
buglet where acpi_throttle wouldn't be used if p4tcc was present but
disabled by the user.

MFC after:	1 week
2005-04-10 20:04:30 +00:00
David E. O'Brien
623720bd03 'dumpon' can run before 'initrandom' so make it.
This gives a better chance of debugging /dev/random related panics.
2005-04-05 18:59:24 +00:00
Sean Chittenden
47accd603c When reloading rules via rc.d/pf, flush everything but existing state
entries that way when rules are read in, it doesn't break established
connections.

Approved by:	mlaier
Reviewed by:	rc
MFC after:	3 weeks
2005-04-04 23:06:10 +00:00
Nate Lawson
c2137e57f5 Instead of leaving the current frequency setting at whatever the BIOS set
on boot, force it to HIGH.  This is needed for some systems which appear
to boot with a low acpi_throttle setting by default.  Thanks to Christian
Brueffer for tracking this down on his system.

MFC after:	1 day
2005-04-03 21:45:20 +00:00
Tom Rhodes
bfd02b7da8 Add a ugidfw_load() function and fix up some of the scripting in this file.
This will allow better integration with the ports system.

Submitted by:	clement
2005-04-02 00:01:03 +00:00
Ruslan Ermilov
8aad57438b Purge orphan catpages.
PR:		conf/35242
Submitted by:	Annihilator <annihilator.c@usa.net>
2005-03-30 18:02:49 +00:00
Colin Percival
c0be525bed netstart is now obsoleted by /etc/rc.d/*, not by /etc/rc.network.
Reported by:	Martin Jakob, on freebsd-stable@
MFC after:	1 month
2005-03-26 20:10:24 +00:00
Kirill Ponomarev
910329da1d Add mt locale directory, since more and more ports create and use it.
Approved by:	kris
MFC after:	3 days
2005-03-22 18:29:41 +00:00
Nate Lawson
8971569ca1 Remove the 'usbd' keyword (it isn't necessary for mixer). Also, use
BEFORE instead of REQUIRE.

Probably ok by:	jhb
MFC after:	3 days
2005-03-17 22:36:16 +00:00
Ruslan Ermilov
3e1631ce0a Start natd(8) before loading firewall rules, to give the
ipdivert.ko module a chance to load.
2005-03-16 08:47:48 +00:00
Doug Barton
1a2980c6c7 Unhook the recently departed lomac file from the build.
Forgotten by:	trhodes (the real one)
2005-03-13 08:07:11 +00:00
Tom Rhodes
a7efb70ebd Remove mac_lomac(4) functionality. The proper way is to use loader.conf
or build the policy into a kernel.

Approved by:	rwatson
2005-03-12 21:09:15 +00:00
Gleb Smirnoff
9091954535 Fix a terrible braino in last commit. Put kern.debug back to /var/log/messages
and do exactly what last commit message described.
2005-03-12 12:31:16 +00:00
David E. O'Brien
2a907aec6b Be consistent about the serial line terminal type.
CVS ----------------------------------------------------------------------
2005-03-09 03:57:08 +00:00
Ruslan Ermilov
08f8440ba4 New Ukrainian locale: uk_UA.CP1251.
Submitted by:	Alexander Peresunko
2005-03-04 14:24:30 +00:00
Brooks Davis
bed34fbfb6 It is sufficent to require rcconf rather than initdiskless. 2005-03-02 19:03:08 +00:00
Brooks Davis
1cd0f19904 Remove stray else.
Reported by:	Tai-hwa Liang <avatar at mmlab dot cse dot yzu dot edu dot tw>
Point hat:	brooks
2005-03-02 16:41:35 +00:00