1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
Commit Graph

793 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
11631ad0d6 Use new savecore(8) option and limit number of kernel dumps that will
be kept around to the 10 most recent ones.

Add UPDATING entry with info how to return to the previous behaviour (no
limits).

Obtained from:	WHEEL Systems
2012-12-16 23:29:56 +00:00
Robert Watson
e0fb6dc33f Specifically point at the Handbook instructions for world updates in
UPDATING by URL.

As there has been some confusion over the need to run "mergemaster -p",
part of our standard upgrade procedure, following the recent addition of
an "auditdistd" user, add a note about it to UPDATING explicitly.
2012-12-02 22:09:16 +00:00
Hiroki Sato
b91dc77506 Document sin6_scope_id handling change and bump FreeBSD_version to 1000025. 2012-11-23 12:12:06 +00:00
Brooks Davis
7f90ab1c09 Fix a minor error in the clang update note.
Reported by:	emaste
2012-11-05 19:20:18 +00:00
Brooks Davis
5b6478b077 After years of hard work by many FreeBSD and LLVM developers, make
clang the default compiler on i386 and amd64 systems.

Special thanks to:	dim, ed, rdivacky
2012-11-05 19:08:18 +00:00
Andrey V. Elsukov
ffdbf9da3b Remove the recently added sysctl variable net.pfil.forward.
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.

Suggested by:	andre
2012-11-02 01:20:55 +00:00
Gavin Atkinson
15974d5548 Genericise the (out of date) instructions from moving from stable to
current.

MFC after:	3 days
2012-10-31 13:52:03 +00:00
Andrey V. Elsukov
a971b54760 Note the removal of the IPFIREWALL_FORWARD kernel option. 2012-10-25 10:35:08 +00:00
Andre Oppermann
cb69178dc0 Note the removal of the ZERO_COPY_SOCKETS kernel option in r241931
and provide a proper explanation.
2012-10-23 16:33:43 +00:00
Gleb Smirnoff
8f134647ca Switch the entire IPv4 stack to keep the IP packet header
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.

  After this change a packet processed by the stack isn't
modified at all[2] except for TTL.

  After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.

[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.

[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.

Reviewed by:	luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by:	ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
Konstantin Belousov
8859ec84c5 Bump __FreeBSD_version and make a note in UPDATING about removal of
the support for non-MPSAFE filesystems.
2012-10-22 17:54:32 +00:00
Attilio Rao
e053ead0c8 Record the full non-MPSAFE pack filesystem disconnect. 2012-10-18 12:11:13 +00:00
Gleb Smirnoff
42a58907c3 Make the "struct if_clone" opaque to users of the cloning API. Users
now use function calls:

  if_clone_simple()
  if_clone_advanced()

to initialize a cloner, instead of macros that initialize if_clone
structure.

Discussed with:		brooks, bz, 1 year ago
2012-10-16 13:37:54 +00:00
Oleksandr Tymoshenko
d6b3aaf842 Split sdhci driver in two parts: sdhci and sdhci_pci.
sdchi encapsulates a generic SD Host Controller logic that relies on
actual hardware driver for register access.

sdhci_pci implements driver for PCI SDHC controllers using new SDHCI
interface

No kernel config modifications are required, but if you load sdhc
as a module you must switch to sdhci_pci instead.
2012-10-16 01:10:43 +00:00
Attilio Rao
5fe580195f Import a FreeBSD port of the FUSE Linux module.
This has been developed during 2 summer of code mandates and being revived
by gnn recently.
The functionality in this commit mirrors entirely content of fusefs-kmod
port, which doesn't need to be installed anymore for -CURRENT setups.

In order to get some sparse technical notes, please refer to:
http://lists.freebsd.org/pipermail/freebsd-fs/2012-March/013876.html

or to the project branch:
svn://svn.freebsd.org/base/projects/fuse/

which also contains granular history of changes happened during port
refinements. This commit does not came from the branch reintegration
itself because it seems svn is not behaving properly for this functionaly
at the moment.

Partly Sponsored by:		Google, Summer of Code program 2005, 2011
Originally submitted by:	ilya, Csaba Henk <csaba-ml AT creo DOT hu >
In collabouration with:		pho
Tested by:			flo, gnn, Gustau Perez,
				Kevin Oberman <rkoberman AT gmail DOT com>
MFC after:			2 months
2012-10-13 23:54:26 +00:00
Gabor Kovesdan
58b6d9a21c - Fix typo
Spotted by:	glebius
2012-10-13 19:37:58 +00:00
Gabor Kovesdan
d38ae94bce - Remove GNU sort and the WITH_GNU_SORT knob 2012-10-13 18:40:39 +00:00
Gleb Smirnoff
21d172a3f1 A step in resolving mess with byte ordering for AF_INET. After this change:
- All packets in NETISR_IP queue are in net byte order.
  - ip_input() is entered in net byte order and converts packet
    to host byte order right _after_ processing pfil(9) hooks.
  - ip_output() is entered in host byte order and converts packet
    to net byte order right _before_ processing pfil(9) hooks.
  - ip_fragment() accepts and emits packet in net byte order.
  - ip_forward(), ip_mloopback() use host byte order (untouched actually).
  - ip_fastforward() no longer modifies packet at all (except ip_ttl).
  - Swapping of byte order there and back removed from the following modules:
    pf(4), ipfw(4), enc(4), if_bridge(4).
  - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version
  - __FreeBSD_version bumped.
  - pfil(9) manual page updated.

Reviewed by:	ray, luigi, eri, melifaro
Tested by:	glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
Adrian Chadd
7b81c83c21 Update UPDATING with the ABI change for net80211. 2012-10-02 17:46:32 +00:00
Konstantin Belousov
d65043bc33 Add the UPDATING note about padlock rng support requiring the config change.
Requested by:	Dewayne Geraghty <dewayne.geraghty@heuristicsystems.com.au>
MFC after:	3 days
2012-10-01 10:46:35 +00:00
Gleb Smirnoff
d6d3f01e0a Merge the projects/pf/head branch, that was worked on for last six months,
into head. The most significant achievements in the new code:

 o Fine grained locking, thus much better performance.
 o Fixes to many problems in pf, that were specific to FreeBSD port.

New code doesn't have that many ifdefs and much less OpenBSDisms, thus
is more attractive to our developers.

  Those interested in details, can browse through SVN log of the
projects/pf/head branch. And for reference, here is exact list of
revisions merged:

r232043, r232044, r232062, r232148, r232149, r232150, r232298, r232330,
r232332, r232340, r232386, r232390, r232391, r232605, r232655, r232656,
r232661, r232662, r232663, r232664, r232673, r232691, r233309, r233782,
r233829, r233830, r233834, r233835, r233836, r233865, r233866, r233868,
r233873, r234056, r234096, r234100, r234108, r234175, r234187, r234223,
r234271, r234272, r234282, r234307, r234309, r234382, r234384, r234456,
r234486, r234606, r234640, r234641, r234642, r234644, r234651, r235505,
r235506, r235535, r235605, r235606, r235826, r235991, r235993, r236168,
r236173, r236179, r236180, r236181, r236186, r236223, r236227, r236230,
r236252, r236254, r236298, r236299, r236300, r236301, r236397, r236398,
r236399, r236499, r236512, r236513, r236525, r236526, r236545, r236548,
r236553, r236554, r236556, r236557, r236561, r236570, r236630, r236672,
r236673, r236679, r236706, r236710, r236718, r237154, r237155, r237169,
r237314, r237363, r237364, r237368, r237369, r237376, r237440, r237442,
r237751, r237783, r237784, r237785, r237788, r237791, r238421, r238522,
r238523, r238524, r238525, r239173, r239186, r239644, r239652, r239661,
r239773, r240125, r240130, r240131, r240136, r240186, r240196, r240212.

I'd like to thank people who participated in early testing:

Tested by:	Florian Smeets <flo freebsd.org>
Tested by:	Chekaluk Vitaly <artemrts ukr.net>
Tested by:	Ben Wilber <ben desync.com>
Tested by:	Ian FREISLICH <ianf cloudseed.co.za>
2012-09-08 06:41:54 +00:00
Martin Matuska
6e767def16 Merge recent vendor changes:
3100 zvol rename fails with EBUSY when dirty
3104 eliminate empty bpobjs
3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc

References:
  https://www.illumos.org/issues/3100
  https://www.illumos.org/issues/3104
  https://www.illumos.org/issues/3120

Obtained from:	illumos (vendor/illumos, vendor/illumos-sys)
MFC after:	2 weeks
2012-08-28 12:25:37 +00:00
Marius Strobl
614e309803 Pull the tier-2 card and change the sparc64 ZFS loader to no longer probe
all diskN aliases for providers (which more or less corresponds to how the
x86 version behaves) but instead probe only those listed in the boot-device
OFW environment variable. This has the following advantages:
- avoids otherwise unavoidable OFW warnings about failures to open disks
  for which aliases exist but no actual hardware is connected
- avoids issues due to different diskN naming schemes
- aligns us with Solaris

MFC after:	3 days
2012-07-27 18:23:11 +00:00
Jung-uk Kim
1f13597d10 Merge OpenSSL 1.0.1c.
Approved by:	benl (maintainer)
2012-07-12 19:30:53 +00:00
Christian Brueffer
7e003b0a8b Document the sysctl/tunable changes in r238379 and r238382.
Suggested by:	mjacob
2012-07-12 07:34:09 +00:00
Gabor Kovesdan
d22c63acab - Add UPDATING entry for BSD sort 2012-06-28 08:22:00 +00:00
Martin Matuska
2d9cf57e18 Introduce "feature flags" for ZFS pools (bump SPA version to 5000).
Add first feature "com.delphix:async_destroy" (asynchronous destroy
of ZFS datasets).
Implement features support in ZFS boot code.

Illumos revisions merged:
13700:2889e2596bd6
13701:1949b688d5fb
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags

References:
https://www.illumos.org/issues/2619
https://www.illumos.org/issues/2747

Obtained from:	illumos (issue #2619, #2747)
MFC after:	1 month
2012-06-11 11:35:22 +00:00
Jason Evans
99e449f299 Update directions on how to disable malloc debugging. 2012-04-17 20:35:54 +00:00
Jason Evans
d1675e38f9 Add an UPDATING entry for the contrib/jemalloc import. 2012-04-17 20:21:04 +00:00
Juli Mallett
84db023ec1 Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
This makes our naming scheme more closely match other systems and the
expectations of much third-party software.  MIPS builds which are little-endian
should require and exhibit no changes.  Big-endian TARGET_ARCHes must be
changed:
	From:		To:
	mipseb		mips
	mipsn32eb	mipsn32
	mips64eb	mips64

An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
2012-03-29 02:54:35 +00:00
Attilio Rao
9c170fd168 Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported
platforms.
This will make every attempt to mount a non-mpsafe filesystem to the
kernel forbidden, unless it is expressely compiled with
VFS_ALLOW_NONMPSAFE option.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.
2012-03-06 20:01:25 +00:00
Mikolaj Golub
c7e41c8b50 Introduce VOP_UNP_BIND(), VOP_UNP_CONNECT(), and VOP_UNP_DETACH()
operations for setting and accessing vnode's v_socket field.

The operations are necessary to implement proper unix socket handling
on layered file systems like nullfs(5).

This change fixes the long standing issue with nullfs(5) being in that
unix sockets did not work between lower and upper layers: if we bound
to a socket on the lower layer we could connect only to the lower
path; if we bound to the upper layer we could connect only to the
upper path. The new behavior is one can connect to both the lower and
the upper paths regardless what layer path one binds to.

PR:		kern/51583, kern/159663
Suggested by:	kib
Reviewed by:	arch
MFC after:	2 weeks
2012-02-29 21:38:31 +00:00
Bjoern A. Zeeb
ca1672da93 Switch getifaddrs(3) to the new API introduced in r231505. Also remove
conditional code parts not used by or applicable to FreeBSD.

The new implementation is supposed to be able to cope with changes to
the 'l' versions of the msghdr structs now used as well as to if_data
allowing future changes without breaking things.

This restores carp(4) config support in HEAD after r231504.

Reviewed by:	glebius, brooks
MFC After:	3 months
2012-02-11 06:05:40 +00:00
Doug Barton
5d48232408 For the mass rc.d changes, add a command line to make the update easier 2012-01-14 23:19:10 +00:00
Doug Barton
e0e0f25b65 Add an entry detailing the removal of set_rcvar() from /etc/rc.subr
Requested by:   Garrett Cooper <yanegomi@gmail.com>
2012-01-14 09:32:58 +00:00
Andriy Gapon
90d8265326 enable stop_scheduler_on_panic by default
My plan is to make this behavior unconditional before 10.0 release.

X-MFC after:	r228424 (if ever)
2012-01-09 12:06:09 +00:00
Gleb Smirnoff
08b68b0e4c A major overhaul of the CARP implementation. The ip_carp.c was started
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.

The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.

ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.

To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]

The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.

Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!

PR:		kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by:	bz
Submitted by:	bz [1]
2011-12-16 12:16:56 +00:00
Jaakko Heinonen
d5d131ee29 Add an entry for r227823. 2011-11-30 20:08:30 +00:00
Attilio Rao
ed1f6dc235 Introduce the option VFS_ALLOW_NONMPSAFE and turn it on by default on
all the architectures.
The option allows to mount non-MPSAFE filesystem. Without it, the
kernel will refuse to mount a non-MPSAFE filesytem.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.

Tested by:	gianni
Reviewed by:	kib
2011-11-08 10:18:07 +00:00
Marius Strobl
a9ab459b31 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and
replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel
configuration files. Besides duplicating functionality, amd(4), which
previously also supported the AMD Am53C974, unlike esp(4) is no longer
maintained and has accumulated enough bit rot over time to always cause
a panic during boot as long as at least one target is attached to it
(see PR 124667).

PR:		124667
Obtained from:	NetBSD (based on)
MFC after:	3 days
2011-11-01 21:26:57 +00:00
Eitan Adler
36daf0495a - change "is is" to "is" or "it is"
- change "the the" to "the"

Approved by:	lstewart
Approved by:	sahil (mentor)
MFC after:	3 days
2011-10-16 14:30:28 +00:00
Nathan Whitehorn
e59e2d8ec7 Farewall, sysinstall! You served us well for many years, but 10.0 is one
digit beyond your time.

Various sysinstall dependencies (e.g. libftpio, libdisk, libodialog, etc.)
will be cleaned up in coming days. Some will take longer than others due to
a few other consumers (tzsetup and sade).
2011-10-03 15:13:09 +00:00
Ken Smith
8a3b6cc1e1 Shift head from 9.0-CURRENT to 10.0-CURRENT in preparation for releasing
it from the 9.0-RELEASE release cycle code freeze.

Approved by:	re (implicit)
2011-09-26 02:27:04 +00:00
Rick Macklem
4d30adc494 Modify vfs_register() to use a hash calculation
on vfc_name to set vfc_typenum, so that vfc_typenum doesn't
change when file systems are loaded in different orders. This
keeps NFS file handles from changing, for file systems that
use vfc_typenum in their fsid. This change is controlled via
a loader.conf variable called vfs.typenumhash, since vfc_typenum
will change once when this is enabled. It defaults to 1 for
9.0, but will default to 0 when MFC'd to stable/8.

Tested by:	hrs
Reviewed by:	jhb, pjd (earlier version)
Approved by:	re (kib)
MFC after:	1 month
2011-09-13 21:01:26 +00:00
Konstantin Belousov
7596eb4872 Bump shared libraries version numbers in preparation for 9.0.
This time, only libraries which ABI has been changed compared to
stable/8, are bumped.

ABI analysis done by:	Gleb Kurtsou
Approved by:	re (kensmith)
2011-08-28 09:26:48 +00:00
Glen Barber
630f2154f2 Reword sentence noting UPDATING entries prior to October 2007 are
only available in older FreeBSD releases.

PR:		159220
Submitted by:	arundel
Patch by:	Benjamin Kaduk (kaduk % mit ! edu)
OK'd by:	imp (via -doc@)
MFC after:	1 week
Approved by:	re (kib)
2011-08-24 12:18:29 +00:00
Robert Watson
74d0c46dde Bump __FreeBSD_version to reflect the availability of capabilities, but
also capability-related changes to fget(9).  This is likely not part of
a formal KPI, but the nvidia driver (at least) uses it.

Mention /dev/{stdin,stdout,stderr} breakage that appears in certain
kernel revisions as best avoided!

Approved by:  re (xxx)
2011-08-15 07:30:48 +00:00
Bjoern A. Zeeb
70d5775697 Clarify that we broke pfsync(4) backward compat with the pf commit r223637.
Suggested by:	Anton Yuzhaninov (citrin citrin.ru)
2011-06-29 13:12:15 +00:00
Bjoern A. Zeeb
e0bfbfce79 Update packet filter (pf) code to OpenBSD 4.5.
You need to update userland (world and ports) tools
to be in sync with the kernel.

Submitted by:	mlaier
Submitted by:	eri
2011-06-28 11:57:25 +00:00
Marius Strobl
4a58eccc5b Add an entry for r221407 forgotten in said revision. 2011-06-18 10:48:00 +00:00
Andriy Gapon
234dab4a82 remove code for dynamic offlining/onlining of CPUs on x86
The code has definitely been broken for SCHED_ULE, which is a default
scheduler.  It may have been broken for SCHED_4BSD in more subtle ways,
e.g. with manually configured CPU affinities and for interrupt devilery
purposes.
We still provide a way to disable individual CPUs or all hyperthreading
"twin" CPUs before SMP startup.  See the UPDATING entry for details.

Interaction between building CPU topology and disabling CPUs still
remains fuzzy: topology is first built using all availble CPUs and then
the disabled CPUs should be "subtracted" from it.  That doesn't work
well if the resulting topology becomes non-uniform.

This work is done in cooperation with Attilio Rao who in addition to
reviewing also provided parts of code.

PR:		kern/145385
Discussed with:	gcooper, ambrisko, mdf, sbruno
Reviewed by:	attilio
Tested by:	pho, pluknet
X-MFC after:	never
2011-06-08 08:12:15 +00:00
Bjoern A. Zeeb
ec49fe398a For the moment document the possible problem introduced with dynamic address
family detection in world, mostly noticed by ifconfig(8), when running with
an old kernel.

Reported by:	Andrzej Tobola (ato iem.pw.edu.pl)
Reported by:	gcooper
2011-06-07 19:39:34 +00:00
Attilio Rao
f0fcb36793 Add an UPDATE entry. 2011-06-07 08:07:41 +00:00
Attilio Rao
4b547324c0 Disconnect sun4v architecture from the three.
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.

Reviewed by:	marius
Tested by:	sbruno
Approved by:	re
2011-05-14 01:53:38 +00:00
Adrian Chadd
f9dfbfa143 Add UPDATING entry for the AR71xx config changes 2011-04-30 11:30:42 +00:00
Rick Macklem
4309e17add This patch changes head so that the default NFS client is now the new
NFS client (which I guess is no longer experimental). The fstype "newnfs"
is now "nfs" and the regular/old NFS client is now fstype "oldnfs".
Although mounts via fstype "nfs" will usually work without userland
changes, an updated mount_nfs(8) binary is needed for kernels built with
"options NFSCL" but not "options NFSCLIENT". Updated mount_nfs(8) and
mount(8) binaries are needed to do mounts for fstype "oldnfs".
The GENERIC kernel configs have been changed to use options
NFSCL and NFSD (the new client and server) instead of NFSCLIENT and NFSSERVER.
For kernels being used on diskless NFS root systems, "options NFSCL"
must be in the kernel config.
Discussed on freebsd-fs@.
2011-04-27 17:51:51 +00:00
Alexander Motin
5d4ac62210 Add obvious note that CAM drivers are required for using CAM ATA. 2011-04-27 08:53:52 +00:00
Alexander Motin
0d307e0905 - Add shim to simplify migration to the CAM-based ATA. For each new adaX
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
 - To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
 - Add some more details to UPDATING.
2011-04-26 17:01:49 +00:00
Alexander Motin
ddfddf12db Explicitly note that device numbers are starting from zero. 2011-04-24 09:23:08 +00:00
Alexander Motin
97b53e3634 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
Rick Macklem
2a85df8ca0 This patch changes the default NFS server to the new one, which was
referred to as the experimental server. It also adds a new command
line option "-o" to both mountd and nfsd that forces them to use the
old/regular NFS server. The "-e" option for these commands is now
a no-op, since the new server is the default. I will be committing rc
script and man changes soon. Discussed on freebsd-fs@.
2011-04-24 00:06:56 +00:00
Dimitry Andric
66f3a31ff9 After removing libobjc and other Objective-C components in r220755,
belatedly bump __FreeBSD_version, and add a note to UPDATING.

Reminded by:	rdivacky
2011-04-18 10:25:54 +00:00
Nathan Whitehorn
0a4b5285d0 Provide a (belated) UPDATING note related to the new release-building
process so that fewer people will be caught unaware.

Requested by:	emaste
2011-04-14 15:44:44 +00:00
Adrian Chadd
1c62cc63b6 Document the ath glue changes. 2011-03-31 08:32:53 +00:00
Dimitry Andric
ce8fb93178 Merge binutils 2.17.50 to head. This brings a number of improvements to
x86 CPU support, better support for powerpc64, some new directives, and
many other things.  Bump __FreeBSD_version, and add a note to UPDATING.

Thanks to the many people that have helped to test this.

Obtained from:	projects/binutils-2.17
2011-02-18 20:54:12 +00:00
VANHULLEBUS Yvan
76f9415be2 Moved the general note about FreeBSD 9.x at the beginning of the list. 2011-02-18 13:21:30 +00:00
VANHULLEBUS Yvan
442da28aeb Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant.
This will break interoperability with all older versions of
FreeBSD for those algorithms.

Reviewed by:	bz, gnn
Obtained from:	NETASQ
MFC after:	1w
2011-02-18 09:40:13 +00:00
Matthew D Fleming
13434232a6 Remove the uio_yield prototype and symbol. This function has been
misnamed since it was introduced and should not be globally exposed
with this name.  The equivalent functionality is now available using
kern_yield(curthread->td_user_pri).  The function remains
undocumented.

Bump __FreeBSD_version.
2011-02-08 00:36:46 +00:00
Rebecca Cran
7b57aa3362 Fix wrapping of 20110103 entry. 2011-01-12 19:28:52 +00:00
Matthew D Fleming
1eae8811d1 Add type checking for static and dynamic sysctls using scalar types.
The code is turned off until the tree is fixed up so it compiles.
__FreeBSD_version was already bumped once today, so skip the bump, but
add an entry to UPDATING.

Note that __DESCR() is used in the SYSCTL_OID() macro and so is not
needed in macros that invoke it.  This use was inconsistent in the
file and I have made it consistent any lines already being changed.

Reviewed by:	bde (previous version), -arch (previous version)
2011-01-12 17:52:48 +00:00
Nathan Whitehorn
4c8945a06b Update dialog to version 20100428. This changes the license under which
dialog is distributed from GPLv2 to LGPLv2 and introduces a number of new
features and a new and better libdialog API. The existing libdialog will
be kept temporarily as libodialog for compatibility purposes until sade,
sysinstall and tzsetup have been either updated or replaced.

__FreeBSD_version is now 900030.

Discussed on:	-current
Approved by:	core
Obtained from:	http://invisible-island.net/dialog
2011-01-12 14:55:02 +00:00
Warner Losh
e4f64803ab Note compatibility issues with make universe and stable systems. 2011-01-03 23:05:20 +00:00
Lawrence Stewart
39bc9de532 - Add some helper hook points to the TCP stack. The hooks allow Khelp modules to
access inbound/outbound events and associated data for established TCP
  connections. The hooks only run if at least one hook function is registered
  for the hook point, ensuring the impact on the stack is effectively nil when
  no TCP Khelp modules are loaded. struct tcp_hhook_data is passed as contextual
  data to any registered Khelp module hook functions.

- Add an OSD (Object Specific Data) pointer to struct tcpcb to allow Khelp
  modules to associate per-connection data with the TCP control block.

- Bump __FreeBSD_version and add a note to UPDATING regarding to ABI changes
  introduced by this commit and r216753.

In collaboration with:	David Hayes <dahayes at swin edu au> and
				Grenville Armitage <garmitage at swin edu au>
Sponsored by:	FreeBSD Foundation
Reviewed by:	bz, others along the way
MFC after:	3 months
2010-12-28 12:13:30 +00:00
Alexander Leidinger
94877c06f3 Suggest to run the delete-old target after the second mergemaster. If you run
it before, your rc scripts may still reference old files/directories and
if you are in the unlucky situation to have triggered a reboot (intentionally
or not) between the delete-old run and the mergemaster, your system may not
start anymore.

While I'm here, give a hint about delete-old-libs.

Noticed by:	bcr (luckily in a discussion and not by getting hit by this)
MFC after:	1 week
2010-12-20 15:17:34 +00:00
Marius Strobl
efd4fc3fb3 o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
support in mii(4):
  - Merge generic flow control advertisement (which can be enabled by
    passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
    NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
    IFM_FLOW isn't implemented as a global option via the "don't care
    mask" but instead as a media specific option this. This has the
    following advantages:
    o allows flow control advertisement with autonegotiation to be
      turned on and off via ifconfig(8) with the default typically
      being off (though MIIF_FORCEPAUSE has been added causing flow
      control to be always advertised, allowing to easily MFC this
      changes for drivers that previously used home-grown support for
      flow control that behaved that way without breaking POLA)
    o allows to deal with PHY drivers where flow control advertisement
      with manual selection doesn't work or at least isn't implemented,
      like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
      by setting MIIF_NOMANPAUSE
    o the available combinations of media options are readily available
      from the `ifconfig -m` output
  - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
    and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
    these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
  - Change IFM_ETH_MASTER from being implemented as a global option via
    the "don't care mask" to a media specific one as it actually is only
    applicable to IFM_1000_T to date.
  - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
    actually configure manually selected slave mode (like we also do in
    the PHY specific implementations).
  - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
    is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
  e1000phy(4) and ip1000phy(4) to use the generic flow control support
  instead of home-grown solutions via IFM_FLAGs. This includes changing
  these PHY drivers and smcphy(4) to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
  i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
  set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
  and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
  the contents of the BMSR via mii_phy_add_media() instead of hardcoding
  them. The latter approach seems to have developed historically, besides
  causing unnecessary code duplication it was also undesirable because
  brgphy_mii_phy_auto() already based the capability advertisement on the
  contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
  just BCM5701. Apparently this was a misinterpretation of a workaround
  in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
  BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
  this doesn't mean we can't set these as well on other PHYs for manual
  media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
  IFM_1000_T master mode support now is generally available with all PHY
  drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
  not applicable there.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:26:10 +00:00
Lawrence Stewart
dbc4240942 This commit marks the first formal contribution of the "Five New TCP Congestion
Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details
about the project are available at: http://caia.swin.edu.au/freebsd/5cc/

- Add a KPI and supporting infrastructure to allow modular congestion control
  algorithms to be used in the net stack. Algorithms can maintain per-connection
  state if required, and connections maintain their own algorithm pointer, which
  allows different connections to concurrently use different algorithms. The
  TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to
  programmatically query or change the congestion control algorithm respectively
  from within an application at runtime.

- Integrate the framework with the TCP stack in as least intrusive a manner as
  possible. Care was also taken to develop the framework in a way that should
  allow integration with other congestion aware transport protocols (e.g. SCTP)
  in the future. The hope is that we will one day be able to share a single set
  of congestion control algorithm modules between all congestion aware transport
  protocols.

- Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack
  and use it to decouple the meaning of recovery from a congestion event and
  recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based
  congestion control protocols don't generally need to recover from packet loss
  and need a different way to note a congestion recovery episode within the
  stack.

- Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code
  and ensures the stack always uses the appropriate mechanisms for recovering
  from packet loss during a congestion recovery episode.

- Extract the NewReno congestion control algorithm from the TCP stack and
  massage it into module form. NewReno is always built into the kernel and will
  remain the default algorithm for the forseeable future. Implementations of
  additional different algorithms will become available in the near future.

- Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code
  that relies on the size of "struct tcpcb" is required.

Many thanks go to the Cisco University Research Program Fund at Community
Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work
at the Centre for Advanced Internet Architectures, Swinburne University of
Technology is greatly appreciated.

In collaboration with:	David Hayes <dahayes at swin edu au> and
			Grenville Armitage <garmitage at swin edu au>
Sponsored by:	Cisco URP, FreeBSD Foundation
Reviewed by:	rpaulo
Tested by:	David Hayes (and many others over the years)
MFC after:	3 months
2010-11-12 06:41:55 +00:00
Andriy Gapon
130a081563 add dates along with revision numbers in UPDATING entry for 20100915 2010-10-25 07:39:05 +00:00
Ed Maste
337299c66d Add a note on the removal of copyright strings from login(1) and sshd(8). 2010-10-07 17:26:22 +00:00
Gordon Tetlow
fd77eab9e0 Add updating entry for manpath.config deprecation.
Approved by:	wes (mentor)
2010-10-04 15:39:53 +00:00
Andriy Gapon
f8fc818b9d UPDATING entry for r212647 2010-09-15 10:04:41 +00:00
Hiroki Sato
d3a8a8b9fa Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces.
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively.  When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first.  If it is found, it reads and installs it as
a policy table.  If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.

When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.

The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.

Discussed with:	ume and bz
2010-09-13 19:55:40 +00:00
Rui Paulo
d69eb5201d Add a note about userland DTracing.
Sponsored by:	The FreeBSD Foundation
2010-09-13 17:49:39 +00:00
Rui Paulo
4065045502 Mention the removal of acpi_aiboost. 2010-07-25 18:32:59 +00:00
Gabor Kovesdan
4dc88ebedf Add BSD grep to the base system and make it our default grep.
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
              lower memory usage than GNU grep, GNU compatibility,
              BSD license.

TODO:         Performance is somewhat behind GNU grep but it is only
              significant for bigger searches.  The reason is complex, the
              most important factor is that GNU grep uses lots of
              optimizations to improve the speed of the regex library.
              First, we need a modern regex library (practically by adopting
              TRE), add support for GNU-style non-standard regexes and then
              reevalute the performance issues and look for bottlenecks.  In
              the meantime, for those, who need better performance, it is
              possible to build GNU grep by setting WITH_GNU_GREP.

Approved by:            delphij (mentor)
Obtained from:          OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
                        freegrep (http://github.com/howardjp/freegrep)
Sponsored by:           Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to:    fjoe (as SoC 2008 mentor),
                        everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
Nathan Whitehorn
c3e289e1ce MFppc64:
Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
Martin Matuska
8fc257994d Merge ZFS version 15 and almost all OpenSolaris bugfixes referenced
in Solaris 10 updates 141445-09 and 142901-14.

Detailed information:
(OpenSolaris revisions and Bug IDs, Solaris 10 patch numbers)

7844:effed23820ae
6755435	zfs_open() and zfs_close() needs to use ZFS_ENTER/ZFS_VERIFY_ZP (141445-01)

7897:e520d8258820
6748436	inconsistent zpool.cache in boot_archive could panic a zfs root filesystem upon boot-up (141445-01)

7965:b795da521357
6740164	zpool attach can create an illegal root pool (141909-02)

8084:b811cc60d650
6769612	zpool_import() will continue to write to cachefile even if altroot is set (N/A)

8121:7fd09d4ebd9c
6757430	want an option for zdb to disable space map loading and leak tracking (141445-01)

8129:e4f45a0bfbb0
6542860	ASSERT: reason != VDEV_LABEL_REMOVE||vdev_inuse(vd, crtxg, reason, 0) (141445-01)

8188:fd00c0a81e80
6761100	want zdb option to select older uberblocks (141445-01)

8190:6eeea43ced42
6774886	zfs_setattr() won't allow ndmp to restore SUNWattr_rw (141445-01)

8225:59a9961c2aeb
6737463	panic while trying to write out config file if root pool import fails (141445-01)

8227:f7d7be9b1f56
6765294	Refactor replay (141445-01)

8228:51e9ca9ee3a5
6572357	libzfs should do more to avoid mnttab lookups (141909-01)
6572376	zfs_iter_filesystems and zfs_iter_snapshots get objset stats twice (141909-01)

8241:5a60f16123ba
6328632	zpool offline is a bit too conservative (141445-01)
6739487	ASSERT: txg <= spa_final_txg due to scrub/export race (141445-01)
6767129	ASSERT: cvd->vdev_isspare, in spa_vdev_detach() (141445-01)
6747698	checksum failures after offline -t / export / import / scrub (141445-01)
6745863	ZFS writes to disk after it has been offlined (141445-01)
6722540	50% slowdown on scrub/resilver with certain vdev configurations (141445-01)
6759999	resilver logic rewrites ditto blocks on both source and destination (141445-01)
6758107	I/O should never suspend during spa_load() (141445-01)
6776548	codereview(1) runs off the page when faced with multi-line comments (N/A)
6761406	AMD errata 91 workaround doesn't work on 64-bit systems (141445-01)

8242:e46e4b2f0a03
6770866	GRUB/ZFS should require physical path or devid, but not both (141445-01)

8269:03a7e9050cfd
6674216	"zfs share" doesn't work, but "zfs set sharenfs=on" does (141445-01)
6621164	$SRC/cmd/zfs/zfs_main.c seems to have a syntax error in the translation note (141445-01)
6635482	i18n problems in libzfs_dataset.c and zfs_main.c (141445-01)
6595194	"zfs get" VALUE column is as wide as NAME (141445-01)
6722991	vdev_disk.c: error checking for ddi_pathname_to_dev_t() must test for NODEV (141445-01)
6396518	ASSERT strings shouldn't be pre-processed (141445-01)

8274:846b39508aff
6713916	scrub/resilver needlessly decompress data (141445-01)

8343:655db2375fed
6739553	libzfs_status msgid table is out of sync (141445-01)
6784104	libzfs unfairly rejects numerical values greater than 2^63 (141445-01)
6784108	zfs_realloc() should not free original memory on failure (141445-01)

8525:e0e0e525d0f8
6788830	set large value to reservation cause core dump (141445-01)
6791064	want sysevents for ZFS scrub (141445-01)
6791066	need to be able to set cachefile on faulted pools (141445-01)
6791071	zpool_do_import() should not enable datasets on faulted pools (141445-01)
6792134	getting multiple properties on a faulted pool leads to confusion (141445-01)

8547:bcc7b46e5ff7
6792884	Vista clients cannot access .zfs (141445-01)

8632:36ef517870a3
6798384	It can take a village to raise a zio (141445-01)

8636:7e4ce9158df3
6551866	deadlock between zfs_write(), zfs_freesp(), and zfs_putapage() (141909-01)
6504953	zfs_getpage() misunderstands VOP_GETPAGE() interface (141909-01)
6702206	ZFS read/writer lock contention throttles sendfile() benchmark (141445-01)
6780491	Zone on a ZFS filesystem has poor fork/exec performance (141445-01)
6747596	assertion failed: DVA_EQUAL(BP_IDENTITY(&zio->io_bp_orig), BP_IDENTITY(zio->io_bp))); (141445-01)

8692:692d4668b40d
6801507	ZFS read aggregation should not mind the gap (141445-01)

8697:e62d2612c14d
6633095	creating a filesystem with many properties set is slow (141445-01)

8768:dfecfdbb27ed
6775697	oracle crashes when overwriting after hitting quota on zfs (141909-01)

8811:f8deccf701cf
6790687	libzfs mnttab caching ignores external changes (141445-01)
6791101	memory leak from libzfs_mnttab_init (141445-01)

8845:91af0d9c0790
6800942	smb_session_create() incorrectly stores IP addresses (N/A)
6582163	Access Control List (ACL) for shares (141445-01)
6804954	smb_search - shortname field should be space padded following the NULL terminator (N/A)
6800184	Panic at smb_oplock_conflict+0x35() (N/A)

8876:59d2e67b4b65
6803822	Reboot after replacement of system disk in a ZFS mirror drops to grub> prompt (141445-01)

8924:5af812f84759
6789318	coredump when issue zdb -uuuu poolname/ (141445-01)
6790345 zdb -dddd -e poolname coredump (141445-01)
6797109 zdb: 'zdb -dddddd pool_name/fs_name inode' coredump if the file with inode was deleted (141445-01)
6797118 zdb: 'zdb -dddddd poolname inum' coredump if I miss the fs name (141445-01)
6803343 shareiscsi=on failed, iscsitgtd failed request to share (141445-01)

9030:243fd360d81f
6815893	hang mounting a dataset after booting into a new boot environment (141445-01)

9056:826e1858a846
6809691	'zpool create -f' no longer overwrites ufs infomation (141445-01)

9179:d8fbd96b79b3
6790064	zfs needs to determine uid and gid earlier in create process (141445-01)

9214:8d350e5d04aa
6604992	forced unmount + being in .zfs/snapshot/<snap1> = not happy (141909-01)
6810367	assertion failed: dvp->v_flag & VROOT, file: ../../common/fs/gfs.c, line: 426 (141909-01)

9229:e3f8b41e5db4
6807765	ztest_dsl_dataset_promote_busy needs to clean up after ENOSPC (141445-01)

9230:e4561e3eb1ef
6821169	offlining a device results in checksum errors (141445-01)
6821170	ZFS should not increment error stats for unavailable devices (141445-01)
6824006	need to increase issue and interrupt taskqs threads in zfs (141445-01)

9234:bffdc4fc05c4
6792139	recovering from a suspended pool needs some work (141445-01)
6794830	reboot command hangs on a failed zfs pool (141445-01)

9246:67c03c93c071
6824062	System panicked in zfs_mount due to NULL pointer dereference when running btts and svvs tests (141909-01)

9276:a8a7fc849933
6816124	System crash running zpool destroy on broken zpool (141445-03)

9355:09928982c591
6818183	zfs snapshot -r is slow due to set_snap_props() doing txg_wait_synced() for each new snapshot (141445-03)

9391:413d0661ef33
6710376	log device can show incorrect status when other parts of pool are degraded (141445-03)

9396:f41cf682d0d3 (part already merged)
6501037	want user/group quotas on ZFS (141445-03)
6827260	assertion failed in arc_read(): hdr == pbuf->b_hdr (141445-03)
6815592	panic: No such hold X on refcount Y from zfs_znode_move (141445-03)
6759986	zfs list shows temporary %clone when doing online zfs recv (141445-03)

9404:319573cd93f8
6774713	zfs ignores canmount=noauto when sharenfs property != off (141445-03)

9412:4aefd8704ce0
6717022	ZFS DMU needs zero-copy support (141445-03)

9425:e7ffacaec3a8
6799895	spa_add_spares() needs to be protected by config lock (141445-03)
6826466	want to post sysevents on hot spare activation (141445-03)
6826468	spa 'allowfaulted' needs some work (141445-03)
6826469	kernel support for storing vdev FRU information (141445-03)
6826470	skip posting checksum errors from DTL regions of leaf vdevs (141445-03)
6826471	I/O errors after device remove probe can confuse FMA (141445-03)
6826472	spares should enjoy some of the benefits of cache devices (141445-03)

9443:2a96d8478e95
6833711	gang leaders shouldn't have to be logical (141445-03)

9463:d0bd231c7518
6764124	want zdb to be able to checksum metadata blocks only (141445-03)

9465:8372081b8019
6830237	zfs panic in zfs_groupmember() (141445-03)

9466:1fdfd1fed9c4
6833162	phantom log device in zpool status (141445-03)

9469:4f68f041ddcd
6824968	add ZFS userquota support to rquotad (141445-03)

9470:6d827468d7b5
6834217	godfather I/O should reexecute (141445-03)

9480:fcff33da767f
6596237	Stop looking and start ganging (141909-02)

9493:9933d599bc93
6623978	lwb->lwb_buf != NULL, file ../../../uts/common/fs/zfs/zil.c, line 787, function zil_lwb_commit (141445-06)

9512:64cafcbcc337
6801810	Commit of aligned streaming rewrites to ZIL device causes unwanted disk reads (N/A)

9515:d3b739d9d043
6586537	async zio taskqs can block out userland commands (142901-09)

9554:787363635b6a
6836768	zfs_userspace() callback has no way to indicate failure (N/A)

9574:1eb6a6ab2c57
6838062	zfs panics when an error is encountered in space_map_load() (141909-02)

9583:b0696cd037cc
6794136	Panic BAD TRAP: type=e when importing degraded zraid pool. (141909-03)

9630:e25a03f552e0
6776104	"zfs import" deadlock between spa_unload() and spa_async_thread() (141445-06)

9653:a70048a304d1
6664765	Unable to remove files when using fat-zap and quota exceeded on ZFS filesystem (141445-06)

9688:127be1845343
6841321	zfs userspace / zfs get userused@ doesn't work on mounted snapshot (N/A)
6843069	zfs get userused@S-1-... doesn't work (N/A)

9873:8ddc892eca6e
6847229	assertion failed: refcount_count(&tx->tx_space_written) + delta <= tx->tx_space_towrite in dmu_tx.c (141445-06)

9904:d260bd3fd47c
6838344	kernel heap corruption detected on zil while stress testing (141445-06)

9951:a4895b3dd543
6844900	zfs_ioc_userspace_upgrade leaks (N/A)

10040:38b25aeeaf7a
6857012	zfs panics on zpool import (141445-06)

10000:241a51d8720c
6848242	zdb -e no longer works as expected (N/A)

10100:4a6965f6bef8
6856634	snv_117 not booting: zfs_parse_bootfs: error2 (141445-07)

10160:a45b03783d44
6861983	zfs should use new name <-> SID interfaces (N/A)
6862984	userquota commands can hang (141445-06)

10299:80845694147f
6696858	zfs receive of incremental replication stream can dereference NULL pointer and crash (N/A)

10302:a9e3d1987706
6696858	zfs receive of incremental replication stream can dereference NULL pointer and crash (fix lint) (N/A)

10575:2a8816c5173b (partial merge)
6882227 spa_async_remove() shouldn't do a full clear (142901-14)

10800:469478b180d9
6880764	fsync on zfs is broken if writes are greater than 32kb on a hard crash and no log attached (142901-09)
6793430 zdb -ivvvv assertion failure: bp->blk_cksum.zc_word[2] == dmu_objset_id(zilog->zl_os) (N/A)

10801:e0bf032e8673 (partial merge)
6822816 assertion failed: zap_remove_int(ds_next_clones_obj) returns ENOENT (142901-09)

10810:b6b161a6ae4a
6892298 buf->b_hdr->b_state != arc_anon, file: ../../common/fs/zfs/arc.c, line: 2849 (142901-09)

10890:499786962772
6807339	spurious checksum errors when replacing a vdev (142901-13)

11249:6c30f7dfc97b
6906110 bad trap panic in zil_replay_log_record (142901-13)
6906946 zfs replay isn't handling uid/gid correctly (142901-13)

11454:6e69bacc1a5a
6898245 suspended zpool should not cause rest of the zfs/zpool commands to hang (142901-10)

11546:42ea6be8961b (partial merge)
6833999 3-way deadlock in dsl_dataset_hold_ref() and dsl_sync_task_group_sync() (142901-09)

Discussed with:	pjd
Approved by:	delphij (mentor)
Obtained from:	OpenSolaris (multiple Bug IDs)
MFC after:	2 months
2010-07-12 23:49:04 +00:00
Christian Brueffer
e409c5c823 Note 8.0-RELEASE.
PR:		143824
Submitted by:	pluknet <pluknet@gmail.com>
2010-05-12 21:20:04 +00:00
Kip Macy
2965a45315 On Alan's advice, rather than do a wholesale conversion on a single
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.

Supported by: Bitgravity Inc.

Discussed with: alc, jeffr, and kib
2010-04-30 00:46:43 +00:00
Alexander Leidinger
21edb039c6 WITH_CTF can now be specified in src.conf (not recommended, there
are some problems with static executables), make.conf (would also
affect ports which do not use GNU make and do not override the
compile targets) or in the kernel config (via "makeoptions
WITH_CTF=yes").

Additional (related) changes:
 - propagate WITH_CTF to module builds
 - do not add -g to the linker flags, it's a noop there anyway
   (at least according to the man page of ld)
 - do not add -g to CFLAGS unconditionally
   we need to have a look if it is really needed (IMO not) or if there
   is a way to add it only when WITH_CTF is used

Note: ctfconvert / ctfmerge lines will not appear in the build output,
to protect the innocent (those which do not build with WITH_CTF would
see the shell-test and may think WITH_CTF is used).

Reviewed by:	imp, jhb, scottl (earlier version)
Discussed on:	arch@
2010-04-02 06:55:31 +00:00
Nathan Whitehorn
841c0c7ec7 Provide groundwork for 32-bit binary compatibility on non-x86 platforms,
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.

Reviewed by:	kib, jhb
2010-03-11 14:49:06 +00:00
David E. O'Brien
8fb1e03807 Use more proper terms (from official documents) for AMD CPU's.
Reviewed by:	imp
2010-03-10 06:10:39 +00:00
Doug Barton
50e8eca680 Add -i to the first post-install mergemaster example to make
it consistent with the other. [1]

Add a note about -U to the mergemaster footnote.

Submitted by:	obrien [1]
2010-03-10 05:44:57 +00:00
Ed Schouten
5ab7f1fc40 Add wtmpcvt(1).
This utility allows users to convert their wtmp databases to the new
format. It makes no sense for users to keep their wtmp log files if they
are unable to view them.

It basically copies ut_line into ut_id as well. This makes it possible
for last(1) and ac(8) to match login records with their corresponding
logout record.
2010-01-14 20:58:45 +00:00
Ed Schouten
279d8efe8d Complete the migration towards utmpx.
- Add a notice to UPDATING, explaining users may need to recompile
  applications that use the old database.
- Bump __FreeBSD_version.
2010-01-13 19:25:03 +00:00
Attilio Rao
f7829d0d5c Introduce the new kernel thread called "deadlock resolver".
While the name is pretentious, a good explanation of its targets is
reported in this 17 months old presentation e-mail:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html

In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq

rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.

Reviewed by:	jeff
Tested by:	pho, Giovanni Trematerra
Sponsored by:	Nokia Incorporated, Sandvine Incorporated
MFC after:	2 weeks
2010-01-09 01:46:38 +00:00
Ruslan Ermilov
1733d35c9c Fixed two typos.
Submitted by:	Maxim Dounin <mdounin@mdounin.ru>
2009-12-25 21:14:34 +00:00
Hajimu UMEMOTO
f2cb5f03a9 Mention the unification of rc.firewall and rc.firewall6.
Suggested by:	David Horn <dhorn2000__at__gmail.com>
2009-12-18 16:35:28 +00:00
Doug Barton
96b4300c62 Add a note that wpa_supplicant(8) may require a full world build to
sync up with 20091109.
2009-11-21 01:43:22 +00:00
Ed Schouten
4b2361f811 Convert syscons on i386 to TERM=xterm.
TEKEN_XTERM is now gone. Because we always use xterm mode now, we only
need a TEKEN_CONS25 switch to go back to cons25.
2009-11-13 11:28:54 +00:00
Ed Schouten
e42fc36867 Switch the default terminal emulation style to xterm for most platforms.
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:

- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
  regions.
- A very hard transition path to support for modern character sets like
  UTF-8.

Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.

I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.

IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):

- Run the application inside script(1), try to reduce the problem and
  send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
  TERM=cons25' so you can run applications the same way you did before.
  You can also build your kernel with `options TEKEN_CONS25' to make all
  virtual terminals use the cons25 emulator by default.

Discussed on:	current@
2009-11-13 05:54:55 +00:00