the main menu.
2. Conditionalized a few small things which needed it.
3. Put PC98 X servers in their own menu, there are so many of them now.
4. Rampaged on the menus.c file in general, reformatting and cleaning up.
Not all mappings are supported, most languages come only with one
encoding since this should be sufficient to get up & running in using
sysinstall, and we are already pretty tight on space. (My previous
commit has already bumped the boot MFS size by another 50 KB for
this.)
This feature requires the `kbdcontrol -L' i've just committed. Plain
text keymaps and the entire scanner are overkill for sysinstall.
Also updated the list of available keymaps while i was at it.
Reviewed by: jkh
. Don't gzip the crunched binary by now; it just fits, and execution is
a lot faster this way (it's truly demand-paged again).
. Add more(1), ft(8), protocols(5), a stripped down services(5).
. Improve the .profile, and make sysinstall actually use it again.
Still no go for a 4 MB configuration though. :-(
but make a second attempt using MNT_FORCE, just in case it has been
unclean from a previous crash. That's dangerous, but far better than
keeping the despaired user standing in the rain...
(Experienced admins can still fsck it then, and remount. Others will
either totally crash, or incidentally succeed, without much further
help possible...)
Btw., mount(2) misses the description of MNT_FORCE for the mount
syscall.
Some changes of my own to make screen saver configuration a little
more sane, and also make it easier to get to the keyboard/screen
setup from the options menu.
- `slstat' with no args dumped core.
- `slstat unit' always failed with a "sysctl linkspecific" error.
- the usage message was nonstandard.
Fixed old bugs:
- missing prototypes, Wformat errors, and other lint.
place (sysinstall.h) when packages change rev.
Change the way that the routing daemon is configured entirely, to
placate Joerg. Also auto-load gated if it's specified, while we're at it.
Off by one in verify allowed one to march one byte off the end of
wd.wd_hostname if wd.wd_hostname had no NUL characters in it.
strncpy of myname into mywd used the source buffer's length, rather
than the dest.
violate disk quotas, has more robust locking, is still being developed,
etc. The main changes merged in were the ability to not fsync() the
mailbox, not do biff/comsat broadcasts, man page fixes.
From NetBSD via OpenBSD to fix NetBSD PR #506
More descriptive message for printer status
(OpenBSD: 1.2)
Various warnings cleaned up (OpenBSD: 1.4)
lpc/lpc.c:
Various warnings cleaned up (OpenBSD: 1.3)
lpd/lpd.c:
Remove trailing blank lines (OpenBSD: 1.2)
Potential umask problem with creating /dev/printer
(OpenBSD: 1.4 and 1.5)
Ftp bounce attack (untested on FreeBSD)
(OpenBSD: 1.6, 1.8, 1.9)
Fencepost in strncpy
(OpenBSD: 1.6)
lpd/printjob.c:
Fix from freebsd for waiting for an exiting filter, that
appears not in the FreeBSD CVS tree.
(OpenBSD: 1.6)
lpd/recvjob.c:
Buffer overflow protection: use strncpy rather than strcpy.
(OpenBSD: 1.3)
lpr/lpr.c:
NetBSD change of return type for main()
(OpenBSD: 1.2)
Restrict time running as root
(OpenBSD: 1.7)
Use getcwd rather than getwd (from NetBSD)
Use snprintf rather than sprintf
(OpenBSD: 1.8)
Minor tweak to end of loop and buffer overflow sanity. card()
overflow already in FreeBSD
(OpenBSD: 1.9)
lptest/lptest.c:
void -> int return type of main, from NetBSD via OpenBSD
(OpenBSD: 1.2)
pac/pac.c:
void -> int return type of main, from NetBSD via OpenBSD
(OpenBSD: 1.3)
Obtained from: OpenBSD
buffer which could be made to lead to a root shell. This patch is
OpenBSD's solution to the problem, and will silently truncate the
output rather than overflow the buffer.
Obtained from: OpenBSD
any maps that may have them. If the YP_SECURE key is present, ypserv
will only allow access to the map from clients on reserved ports.
If the YP_INTERDOMAIN key is present, the server will do DNS lookups
for hostnames that it can't find in hosts.byname or hosts.byaddr.
This is the same as the -d flag (which is retained for backwards
compatibility) but it can be set on a per-map/per-domain basis.
Also modified /var/yp/Makefile to add YP_INTERDOMAIN to the hosts.*
maps and YP_SECURE to master.passwd.* maps by default.
map databases. Also document said flags in the man page.
Adding YP_INTERDOMAIN to a map causes ypserv(8) to do a DNS lookup
when a yp_match() on the map fails. (This affects only the hosts.by*
maps; for all other maps it's ignored.) The YP_SECURE entry causes
ypserv(8) to restrict access to the map so that only clients making
requests from reserved ports can get at it.
Our ypserv doesn't currently support these features so they're silently
ignored for the moment, but this will change. :)
find two users with the same UID (i.e. root and toor), but yp_mkdb(8)
forbits duplicate keys, so only one of them will end up in the *.byuid
maps (probably toor, since it comes after root in the template file).
If I asked rpc.yppasswdd(8) to change toor's password, it would update
the *.byname maps correctly, but incorrectly modify root's entry in
the *.byuid maps since the only matching record with UID=0 in those
maps belongs to root.
To fix this, we check that both the name and UID are correct before trying
to write new entries to the maps.
Submitted by: whistle communications
move the socket from /dev to /var/run by default
TRANSITIONALLY make syslog add a symlink..
I PROMISE I'll remove that as soon as I have the makefiles etc fixed as well.
the callback is a fatal error for this function; return immediatlely if
this happens. Also make the "failed to establish callback handle" error
mesaage print the IP address of the target callback host.
If timed is running when system clock is changed by date command,
improper wtmp entry is made. According to wtmp(5), two entries, one
with "|" as ut_line field and one with "{" for ut_line, should be
recorded, but, one with "|" and one with "}" are made.
Closes: PR#bin/1182
Submitted by: Masafumi NAKANE <masafumi@tky007.tth.expo96.ad.jp>
/var/yp/master.passwd template file and it uses the same kind of code
as chpass(1), it may also be vulnerable to the bug from PR #1519.
May as well deal with it since I'm in the area. (yppasswdd in -stable
doesn't do additions, therefore it shouldn't be have this problem.)
and both changes need to be pulled into the stable branch). The
problem here is that when pwd_mkdb creates /etc/passwd, it turns
empty UID and GID fields into zeroes. To fix this, we check the
_PWF_UID and _PWF_GID bits in the pw_fields flag: if the bits
are not set, we print an empty field instead of a zero. This way,
you don't get zeroes in the UID or GID fields unless you explicit
want them.
``/dev/??'' for NFS swap.
I had a hard time to figure out whether it's possible to print the
actual mounted swap file, but i failed to get any information. If
anybody knows how to get ``192.168.0.1:/swap.192.168.0.3'' instead,
please step forward!
This fixes the kernel panic when propagating userconfig changes to
arbitrary kernels.
Remove obsoleted `#include <tcl.h>' added a few <stdio.h> where
necessary.
Fix getting scsi bus information from an -incore kernel.
Turned on SAVE_USERCONFIG by default.
required. a core is not dumped at first connecting time and
dumped at second or third time. (patch I)
2. A routine for "show route" refers out of allocated space.
Values pointed by "lp" should be read as CHAR, I think.
there is also no free() for disallocation. (patch II)
Here is also a patch for an improvement: In current imprementation,
even if PPP connection is disconnected by time out, prompt of
interactive mode does not change from "PPP>" to "ppp>" to
indicate the disconnection on a terminal.
So I modified the code to do that. (patch III)
Submitted-By: NAKAMURA Motonori <motonori@econ.kyoto-u.ac.jp>
on their own without even attempting to get concensus in the IETF, but
there are also lots of Win95/NT boxes out there.
CLoses PR#1494
Submitted-By: Peter Childs <pjchilds@imforei.apana.org.au>
For me, more often than not, the backgrounded syslogd daemon is not
yet ready to process log messages before other things (such as named)
want to log a heap of them. It seems that it's the O_SYNC writes of
the stuff coming in from /dev/klog that's the slowdown.
Anyway, instead of using the libc daemon, roll a modified version. This
one has a timeout. The child will wait for either the timeout to expire
or the child process to signal it to let it know that it's "ready" and
the /dev/log socket is set up and active, so it's safe to continue the
boot. It adds a small fraction of a second pause to the boot time, but on
the other hand the overall boot time is *quicker* since the disk is not
being thrashed while the log messages are getting written out synchronously
one by one while other daemons are loading in parallel.
The timeout is in case the child segfaults or something before becoming
fully operational.
SLIP/PPP devices, putting them before the others in the network device
selection menu.
2. Change "Other" to "URL" so as not to conflict with the keyboard accellerator
for the "OK" button in FTP site selection menu.
3. Detect the NULL last symbol in the name list and initialize the other
members correctly.
First, change sysinstall and the Makefile rules to not build the kernel
nlist directly into sysinstall now. Instead, spit it out as an ascii
file in /stand and parse it from sysinstall later. This solves the chicken-n-
egg problem of building sysinstall into the fsimage before BOOTMFS is built
and can have its symbols extracted. Now we generate the symbol file in
release.8.
Second, add Poul-Henning's USERCONFIG_BOOT changes. These have two
effects:
1. Userconfig is always entered, rather than only after a -c
(don't scream yet, it's not as bad as it sounds).
2. Userconfig reads a message string which can optionally be
written just past the boot blocks. This string "preloads"
the userconfig input buffer and is parsed as user input.
If the first command is not "USERCONFIG", userconfig will
treat this as an implied "quit" (which is why you don't need
to scream - you never even know you went through userconfig
and back out again if you don't specifically ask for it),
otherwise it will read and execute the following commands
until a "quit" is seen or the end is reached, in which case
the normal userconfig command prompt will then be presented.
How to create your own startup sequences, using any boot.flp image
from the next snap forward (not yet, but soon):
% dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO
USERCONFIG
irq ed0 10
iomem ed0 0xcc000
disable ed1
quit
WAKKA_WAKKA_DOO
Third, add an intro screen to UserConfig so that users aren't just thrown
into this strange screen if userconfig is auto-launched. The default
boot.flp startup sequence is now, in fact, this:
USERCONFIG
intro
visual
(Since visual never returns, we don't need a following "quit").
Submitted-By: phk & jkh
kernel" mechanism. This is just the foundation - more work follows
and will be committed over the next few hours.
Submitted-by: "Eric L. Hernes" <erich@lodgenet.com> & jkh
possibility of security holes allowing root penetration.
Inspired by: Mark Handley <M.Handley@cs.ucl.ac.uk> and
Theo de Raadt <deraadt@theos.com> independently
Submitted by: Theo de Raadt <deraadt@theos.com>
have it check to see that it doesn't contain any '/' characters. This
prevents possible silliness like ypcat "../../../kernel". We already
test the domain name for this in yp_validdomain(), and ypserv itself
tests the map name in yp_open_db(), but it doesn't hurt to be paranoid
and test for it in the generic access routine too. rpc.ypxfrd does not
test the map name for slashes, but it does call yp_access() with the
map name, so this removes a potential vulnerability from there.
Also make the tests for IPPORT_RESERVED a little more selective: make
sure it trips when map == master.passwd.*, prog == YPPROC and proc ==
YPPROC_XFR, and prog == YPXFRD_FREEBSD_PROG and proc == YPXFRD_GETMAP.
Also use IPPORT_RESERVED instead of hard-coded value.
by sysctl and never can be in their documented form (kern.name_max would
have to become fs.filesystemname.name_max, etc.).
Added missing references to user.stream_max and user.tzname_max. These
seem to misnamed. <sys/sysconf.h> says that they correspond to POSIX2
names, but the sysconf names don't have POSIX2 or "posix2" like all the
other POSIX2 names.
and use /dev/console.
I really think the proper test is to determine which device has been configured
to be the console (remember the RB_SERIAL flag?) and use it instead of always
trying to open /dev/ttyv0 first.
and the user inserts a floppy), read the config file to pre-define variables
for a custom installation.
[Note: I fixed one bug in LOAD_CONFIG_FILE code, but it's still not perfect.]
for gcc >= 2.5 and no-ops for gcc >= 2.6. Converted to use __dead2
or __pure2 where it wasn't already done, except in math.h where use
of __pure was mostly wrong.
ask for matching confirmation. I'm sure there is a clever direct-from-perl
ioctl way of putting the terminal into noecho mode, but I don't feel like
learning perl so I just used system. [yes, I'll put stty on the installation
boot floppy as necessary]
works from startup, and works with XFree86 via /dev/sysmouse, it should
be started at boot and left running.
Pointed out by: Sujal Patel <smpatel@umiacs.umd.edu>
I could find. This change does the following:
- s/usage()/break;/ in handling the -s switch.
- use err/warn instead of fprintf(stderr, ... strerror()); exit(1);
- implement Hitachi PUMA HitTablet support from the XFree86 code,
whatever the hell that is. :-)
- correctly implement baud rate setting, too much was cut from the
XFree86 code, the critical parts were a sweep over all likely
mouse powerup baud rates to switch it to the reqested rate.
- logitech support was busted (at least on mine, which is autosensing
and runs in either mmseries or logitech mode depending on the handshake
code at startup. Among other things, you talk to it at 1200, then
switch to the target baud later.
Some remaining problems.. samplerate setting is missing, but I've not
found where this is meant to be set yet. I presume this is resolution
setting of some kind.
the real buffer size. Note that the strncpy(domain, ...) doesn't need to
be a strncpy(), since it is copying from itself to itself, but belts
and suspenders don't hurt and this is not time-critical code.
Fixes the half of PR bin/1581 that wasn't fixed in rev 1.7
Submitted by: Karl <karl@codebase.mcs.net>
- add ctm_conf.gnats from freefall
- add support for doing both the immediate mailout and the queued mailout.
- use "sendmail -odq -t" rather than "sendamil -t" to make it queue to
the mailqueue rather than immediately begin transmission. This allows
us to take advantage of our ordered dequeueing system without blowing
WC's T1 to hell with a 50 part mailout in parallel.
- bump the max ctm size from 3MB to 10MB.... This is mainly for the fast
list.
we actually look for the *group* and not the user's gid. user daemon
has traditionally been group 31 (guest).
Also clear out the groups vector so that it doesn't inherit the groups
of the invoking user (ever run rwhod by hand before?) Unfortunately, we
can't empty the supplemental groups list because the !&@^#! egid is stored
in there! :-(
of connections, we cannot afford to allow "disappeared" client to cause
us to leave one of the 14 connections open and hanging in a read() forever.
(SO_KEEPALIVE causes probe packets to be sent after a few hours of IDLE
time where no data has been transferred. Sup should NEVER do this, so the
only time it will have an effect is if it looses the remote machine)
files in /var/tmp. Sup needs to send the file size, so that
prevents running gzip in a pipeline (sigh).
It now opens a temporary file, and immediately unlinks it. It sends
gzip's output to the temp file, and when gzip is done, it rewinds the
file and sends it. When the last fd is closed, the file storage is
reclaimed. With luck, this will stop those 15MB
gzip < emacs-19.30.tgz > /var/tmp/tmp.xxxx files from being left behind
and blowing out /var on freefall.
While I have the platform, let me quote a fortune entry which sup reminds
me of: "It is a crock of sh!t, and it stinks!"
of copies to save is zero. Incorporate suggested fix with some stylistic
cleanup to make the resulting code more readable.
Submitted-By: Kenneth Stailey <kstailey@dol-esa.gov>
"." means the object directory, so it is just confusing to use it
when nothing is included from the object directory unless the object
directory is also the source directory. It is confusing for "."
not to mean the source directory anyway, so used `-I.'s should be
replaced by `-I${.OBJDIR}'.
