1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-21 11:13:30 +00:00
Commit Graph

5897 Commits

Author SHA1 Message Date
David Schultz
a50079b7ff People porting FreeBSD to new architectures ought not have to
implement a deprecated FPU control interface in addition to the
standard one.  To make this clearer, further deprecate ieeefp.h
by not declaring the function prototypes except on architectures
that implement them already.

Currently i386 and amd64 implement the ieeefp.h interface for
compatibility, and for fp[gs]etprec(), which doesn't exist on
most other hardware.  Powerpc, sparc64, and ia64 partially implement
it and probably shouldn't, and other architectures don't implement it
at all.
2011-10-21 06:41:46 +00:00
Ken Smith
7042aba738 Add a warning about why sbp(4) is commented out so that curious folks
are forewarned they might wind up with a hole in their foot if they
decide to give it a try.

Suggested by:	dougb
2011-10-19 21:55:20 +00:00
Ken Smith
4c0ba9b742 Comment out the sbp(4) driver for architectures that support it.
As part of the 8.0-RELEASE cycle this was done in stable/8 (r199112)
but was left alone in head so people could work on fixing an issue that
caused boot failure on some motherboards.  Apparently nobody has worked
on it and we are getting reports of boot failure with the 9.0 test builds.
So this time I'll comment out the driver in head (still hoping someone
will work on it) and MFC to stable/9.

Submitted by:	Alberto Villa <avilla at FreeBSD dot org>
2011-10-18 13:45:16 +00:00
Dag-Erling Smørgrav
a417d4a46b Trace attempts to call restricted MD syscalls. 2011-10-18 07:39:27 +00:00
Konstantin Belousov
6bfe4c78c8 Remove unused define.
MFC after:	1 month
2011-10-07 16:09:44 +00:00
Xin LI
db1fda10b4 Add the 9750 SATA+SAS 6Gb/s RAID controller card driver, tws(4). Many
thanks for their contiued support to FreeBSD.

This is version 10.80.00.003 from codeset 10.2.1 [1]

Obtained from:	LSI http://kb.lsi.com/Download16574.aspx [1]
2011-10-04 21:40:25 +00:00
Konstantin Belousov
c06f5f6cea Do not allow the kernel to access usermode pages without installed
fault handler. Panic immediately in such situation, on i386 and amd64.

Reviewed by:	avg, jhb
MFC after:	1 week
2011-10-03 17:01:31 +00:00
Attilio Rao
8d79dfca55 Add some improvements in the idle table callbacks:
- Replace instances of manual assembly instruction "hlt" call
  with halt() function calling.
- In cpu_idle_mwait() avoid races in check to sched_runnable() using
  the same pattern used in cpu_idle_hlt() with the 'hlt' instruction.
- Add comments explaining the logic behind the pattern used in
  cpu_idle_hlt() and other idle callbacks.

In collabouration with:	jhb, mav
Reviewed by:	adri, kib
MFC after:	3 weeks
2011-10-03 14:23:00 +00:00
Kip Macy
9eca9361f9 Auto-generated code from sys_ prefixing makesyscalls.sh change
Approved by:	re(bz)
2011-09-16 14:04:14 +00:00
Kip Macy
8451d0dd78 In order to maximize the re-usability of kernel code in user space this
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.

Reviewed by:	rwatson
Approved by:	re (bz)
2011-09-16 13:58:51 +00:00
Konstantin Belousov
20aee906b4 Put amd64_syscall() prototype in md_var.h.
Requested by:	jhb
Reviewed by:	alc, jhb
Approved by:	re (bz)
MFC after:	2 weeks
2011-09-15 09:54:07 +00:00
Konstantin Belousov
7a1c55c380 Microoptimize the return path for the fast syscalls on amd64. Arrange
the code to have the fall-through path to follow the likely target.
Do not use intermediate register to reload user %rsp.

Proposed by:	alc
Reviewed by:	alc, jhb
Approved by:	re (bz)
MFC after:	2 weeks
2011-09-15 09:53:04 +00:00
Konstantin Belousov
e4505da615 The jump target shall be after the padding, not into it.
Reported by:	alc
Approved by:	re (bz)
MFC after:	2 weeks
2011-09-11 18:00:46 +00:00
Christian Brueffer
b48f7c4c8d Fix a zyd(4) comment typo that was copy+pasted into most kernel config files.
PR:		160276
Submitted by:	MATSUMIYA Ryo <matsumiya@mma.club.uec.ac.jp>
Approved by:	re (kib)
MFC after:	1 week
2011-09-11 17:39:51 +00:00
Konstantin Belousov
8bd1142b52 Perform amd64-specific microoptimizations for native syscall entry
sequence. The effect is ~1% on the microbenchmark.

In particular, do not restore registers which are preserved by the
C calling sequence. Align the jump target. Avoid unneeded memory
accesses by calculating some data in syscall entry trampoline.

Reviewed by:	jhb
Approved by:	re (bz)
MFC after:	2 weeks
2011-09-11 16:08:10 +00:00
Konstantin Belousov
26ccf4f10f Inline the syscallenter() and syscallret(). This reduces the time measured
by the syscall entry speed microbenchmarks by ~10% on amd64.

Submitted by:	jhb
Approved by:	re (bz)
MFC after:	2 weeks
2011-09-11 16:05:09 +00:00
Konstantin Belousov
3407fefef6 Split the vm_page flags PG_WRITEABLE and PG_REFERENCED into atomic
flags field. Updates to the atomic flags are performed using the atomic
ops on the containing word, do not require any vm lock to be held, and
are non-blocking. The vm_page_aflag_set(9) and vm_page_aflag_clear(9)
functions are provided to modify afalgs.

Document the changes to flags field to only require the page lock.

Introduce vm_page_reference(9) function to provide a stable KPI and
KBI for filesystems like tmpfs and zfs which need to mark a page as
referenced.

Reviewed by:    alc, attilio
Tested by:      marius, flo (sparc64); andreast (powerpc, powerpc64)
Approved by:	re (bz)
2011-09-06 10:30:11 +00:00
John Baldwin
3a3ba1b069 Enable the puc(4) driver on amd64 and i386 in GENERIC. This allows
devices supported by puc(4) to work "out of the box" since puc.ko does
not work "out of the box".

Reviewed by:	marcel
Approved by:	re (kib)
MFC after:	1 week
2011-08-26 21:22:34 +00:00
John Baldwin
cee0b197de Make NKPT a kernel option on amd64 so that it can be set to a non-default
value from kernel config files.

Reviewed by:	alc
Approved by:	re (kib)
MFC after:	1 week
2011-08-26 17:08:22 +00:00
Bjoern A. Zeeb
61bc18a327 In HEAD when doing no further checkes there is no reason use the
temporary variable and check with if as TUNABLE_*_FETCH do not
alter values unless successfully found the tunable.

Reported by:	jhb, bde
MFC after:	3 days
X-MFC with:	r224516
Approved by:	re (kib)
2011-08-20 19:21:46 +00:00
Robert Watson
a9d2f8d84f Second-to-last commit implementing Capsicum capabilities in the FreeBSD
kernel for FreeBSD 9.0:

Add a new capability mask argument to fget(9) and friends, allowing system
call code to declare what capabilities are required when an integer file
descriptor is converted into an in-kernel struct file *.  With options
CAPABILITIES compiled into the kernel, this enforces capability
protection; without, this change is effectively a no-op.

Some cases require special handling, such as mmap(2), which must preserve
information about the maximum rights at the time of mapping in the memory
map so that they can later be enforced in mprotect(2) -- this is done by
narrowing the rights in the existing max_protection field used for similar
purposes with file permissions.

In namei(9), we assert that the code is not reached from within capability
mode, as we're not yet ready to enforce namespace capabilities there.
This will follow in a later commit.

Update two capability names: CAP_EVENT and CAP_KEVENT become
CAP_POST_KEVENT and CAP_POLL_KEVENT to more accurately indicate what they
represent.

Approved by:	re (bz)
Submitted by:	jonathan
Sponsored by:	Google Inc
2011-08-11 12:30:23 +00:00
Konstantin Belousov
d98d0ce27a - Move the PG_UNMANAGED flag from m->flags to m->oflags, renaming the flag
to VPO_UNMANAGED (and also making the flag protected by the vm object
  lock, instead of vm page queue lock).
- Mark the fake pages with both PG_FICTITIOUS (as it is now) and
  VPO_UNMANAGED. As a consequence, pmap code now can use use just
  VPO_UNMANAGED to decide whether the page is unmanaged.

Reviewed by:	alc
Tested by:	pho (x86, previous version), marius (sparc64),
    marcel (arm, ia64, powerpc), ray (mips)
Sponsored by:	The FreeBSD Foundation
Approved by:	re (bz)
2011-08-09 21:01:36 +00:00
Rick Macklem
88c037e26a Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by:	re (hrs)
2011-08-07 20:16:46 +00:00
Bjoern A. Zeeb
0a5f264d60 Introduce a tunable to disable the time consuming parts of bootup
memtesting, which can easily save seconds to minutes of boot time.
The tunable name is kept general to allow reusing the code in
alternate frameworks.

Requested by:	many
Discussed on:	arch (a while a go)
Obtained from:	Sandvine Incorporated
Reviewed by:	sbruno
Approved by:	re (kib)
MFC after:	2 weeks
2011-07-30 13:33:05 +00:00
Attilio Rao
786ef92b7b Bump MAXCPU for amd64, ia64 and XLP mips appropriately.
From now on, default values for FreeBSD will be 64 maxiumum supported
CPUs on amd64 and ia64 and 128 for XLP. All the other architectures
seem already capped appropriately (with the exception of sparc64 which
needs further support on jalapeno flavour).

Bump __FreeBSD_version in order to reflect KBI/KPI brekage introduced
during the infrastructure cleanup for supporting MAXCPU > 32. This
covers cpumask_t retiral too.

The switch is considered completed at the present time, so for whatever
bug you may experience that is reconducible to that area, please report
immediately.

Requested by:	marcel, jchandra
Tested by:	pluknet, sbruno
Approved by:	re (kib)
2011-07-19 13:00:30 +00:00
Attilio Rao
68b739cd6f Add the possibility to specify from kernel configs MAXCPU value.
This patch is going to help in cases like mips flavours where you
want a more granular support on MAXCPU.

No MFC is previewed for this patch.

Tested by:	pluknet
Approved by:	re (kib)
2011-07-19 00:37:24 +00:00
Attilio Rao
521ea19d1c - Remove the eintrcnt/eintrnames usage and introduce the concept of
sintrcnt/sintrnames which are symbols containing the size of the 2
  tables.
- For amd64/i386 remove the storage of intr* stuff from assembly files.
  This area can be widely improved by applying the same to other
  architectures and likely finding an unified approach among them and
  move the whole code to be MI. More work in this area is expected to
  happen fairly soon.

No MFC is previewed for this patch.

Tested by:	pluknet
Reviewed by:	jhb
Approved by:	re (kib)
2011-07-18 15:19:40 +00:00
Jung-uk Kim
f0b28f005e Correct cpu_monitor() and cpu_mwait() for amd64. These instructions take
%rcx as "extensions" in long mode.  If any unused bit is set in %rcx, these
instructions cause general protection fault.  Fix style nits and synchronize
i386 with amd64.
2011-07-05 18:42:10 +00:00
Attilio Rao
470107b2f1 MFC 2011-07-04 11:13:00 +00:00
Alan Cox
80788b2a27 When iterating over a paging queue, explicitly check for PG_MARKER, instead
of relying on zeroed memory being interpreted as an empty PV list.

Reviewed by:	kib
2011-07-02 23:42:04 +00:00
Jonathan Anderson
12bc222e57 Add some checks to ensure that Capsicum is behaving correctly, and add some
more explicit comments about what's going on and what future maintainers
need to do when e.g. adding a new operation to a sys_machdep.c.

Approved by: mentor(rwatson), re(bz)
2011-06-30 10:56:02 +00:00
Attilio Rao
7b744f6b01 MFC 2011-06-30 10:19:43 +00:00
Alan Cox
6bbee8e28a Add a new option, OBJPR_NOTMAPPED, to vm_object_page_remove(). Passing this
option to vm_object_page_remove() asserts that the specified range of pages
is not mapped, or more precisely that none of these pages have any managed
mappings.  Thus, vm_object_page_remove() need not call pmap_remove_all() on
the pages.

This change not only saves time by eliminating pointless calls to
pmap_remove_all(), but it also eliminates an inconsistency in the use of
pmap_remove_all() versus related functions, like pmap_remove_write().  It
eliminates harmless but pointless calls to pmap_remove_all() that were being
performed on PG_UNMANAGED pages.

Update all of the existing assertions on pmap_remove_all() to reflect this
change.

Reviewed by:	kib
2011-06-29 16:40:41 +00:00
Jonathan Anderson
24c1c3bf71 We may split today's CAPABILITIES into CAPABILITY_MODE (which has
to do with global namespaces) and CAPABILITIES (which has to do with
constraining file descriptors). Just in case, and because it's a better
name anyway, let's move CAPABILITIES out of the way.

Also, change opt_capabilities.h to opt_capsicum.h; for now, this will
only hold CAPABILITY_MODE, but it will probably also hold the new
CAPABILITIES (implying constrained file descriptors) in the future.

Approved by: rwatson
Sponsored by: Google UK Ltd
2011-06-29 13:03:05 +00:00
Attilio Rao
6b6603b30e Remove the pc_cpumask usage from amd64.
Reviewed by:	alc
Tested by:	pluknet
2011-06-26 21:36:53 +00:00
Attilio Rao
de138ec703 MFC 2011-06-24 16:35:40 +00:00
John Baldwin
1368987ae4 Move {amd64,i386}/pci/pci_bus.c and {amd64,i386}/include/pci_cfgreg.h to
the x86 tree.  The $PIR code is still only enabled on i386 and not amd64.
While here, make the qpi(4) driver on conditional on 'device pci'.
2011-06-22 21:04:13 +00:00
Attilio Rao
9b571ec6b3 MFC 2011-06-22 19:42:32 +00:00
John Baldwin
e8f40e32eb Oops, missed these in 223424.
Reported by:	jkim
2011-06-22 18:48:07 +00:00
John Baldwin
3bf59bd14f Use uintXX_t instead of u_intXX_t. 2011-06-22 17:55:16 +00:00
John Baldwin
38d7a61ba4 Add a helper routine to conditionally modify the start address of a
resource allocation from an x86 Host-PCI bridge driver so that it can be
reused by the ACPI Host-PCI bridge driver (and eventually the MPTable
Host-PCI bridge driver) instead of duplicating the same logic.  Note that
this means that hw.acpi.host_mem_start is now replaced with the
hw.pci.host_mem_start tunable that was already used in the non-ACPI case.
This also removes hw.acpi.host_mem_start on ia64 where it was not
applicable (the implementation was very x86-specific).

While here, adjust the logic to apply the new start address on any
"wildcard" allocation even if that allocation comes from a subset of
the allowable address range.

Reviewed by:	imp (1)
2011-06-22 16:15:15 +00:00
Attilio Rao
2e4cefa632 Remove the usage of pc_other_cpus from amd64.
Tested by:	pluknet
2011-06-21 09:19:38 +00:00
Konstantin Belousov
1c23d0f727 Fix vfork. Add comments. 2011-06-18 12:13:28 +00:00
Hans Petter Selasky
144b716627 Enable USB 3.0 support by default in i386 and amd64 GENERIC kernels.
Discussed with:	joel @ and thompsa @
MFC after:	7 days
2011-06-14 20:30:49 +00:00
Joel Dahl
701b698b6f Enable sound support by default on i386 and amd64.
The generic sound driver has been added, along with enough
device-specific drivers to support the most common audio
chipsets.

We've discussed enabling it from time to time over the years
and we've received numerous requests from users, so we decided
that shipping 9.0 with working audio by default would be the
best thing to do.

Bug reports should be sent to the multimedia@ mailing list, as
usual.

Approved by:    mav
No objection:   re
2011-06-11 09:08:46 +00:00
John Baldwin
049dc0d1ff Implement BUS_ADJUST_RESOURCE() for the x86 drivers that sit between the
Host-PCI bridge drivers and nexus.
2011-06-10 12:30:16 +00:00
Andriy Gapon
234dab4a82 remove code for dynamic offlining/onlining of CPUs on x86
The code has definitely been broken for SCHED_ULE, which is a default
scheduler.  It may have been broken for SCHED_4BSD in more subtle ways,
e.g. with manually configured CPU affinities and for interrupt devilery
purposes.
We still provide a way to disable individual CPUs or all hyperthreading
"twin" CPUs before SMP startup.  See the UPDATING entry for details.

Interaction between building CPU topology and disabling CPUs still
remains fuzzy: topology is first built using all availble CPUs and then
the disabled CPUs should be "subtracted" from it.  That doesn't work
well if the resulting topology becomes non-uniform.

This work is done in cooperation with Attilio Rao who in addition to
reviewing also provided parts of code.

PR:		kern/145385
Discussed with:	gcooper, ambrisko, mdf, sbruno
Reviewed by:	attilio
Tested by:	pho, pluknet
X-MFC after:	never
2011-06-08 08:12:15 +00:00
Attilio Rao
74e4245e3f Bring back the number of CPU to 32. 2011-06-07 08:05:23 +00:00
Attilio Rao
81c02539f1 MFC 2011-06-06 21:38:39 +00:00
Andriy Gapon
ecee337a8c don't use cpuid level 4 in x86 cpu topology detection if it's not supported
This regression was introduced in r213323.
There are probably no Intel cpus that support amd64 mode, but do not
support cpuid level 4, but it's better to keep i386 and amd64 versions
of this code in sync.

Discovered by:	pho
Tested by:	pho
MFC after:	2 weeks
2011-06-06 14:23:13 +00:00