interfaces. The original resource_find() returned a pointer to an internal
resource table entry. resource_find_hard() dereferences the actual
passed in value (oops!) - effectively trashing random memory due to
the pointer being passed in with a random initial value.
Submitted by: bde
Use strtoul(), not strtol() in the hints decoder so that
'flags 0xa0ffa0ff' is not truncated to 0x7fffffff.
Use a stack buffer instead of a static 100 byte bss buffer.
Use \0 for the NUL character.
Remove some ``excessive'' parens.
dynamic hints. This allows the resource_XXX_value() calls to work
before malloc() has started. This gets the serial console working as well
as a few other things.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
required (rounded up a little) instead of twice the previous amount (or
a fixed amount for the first allocation).
The bug caused memory corruption when a new unit number for a devclass
was more than about twice the previous maximum one (or more than 3 for
the first one), so it corrupted memory (which happened to be the atkbdc
port resource list) in the reporter's configuration with sio unit
numbers { 0, 25, 1, 2, ... }.
Reviewed by: dfr
Reported by: Leonid Lukiyanets <stalwar78@hotmail.com>
buzy, only search upwards for a free slot to use..
This broke unit numbering on ATA systems where PCI attached controllers
come before the mainboard ones...
Reviewed by: dfr
is used to control whether the debug messages are output at runtime.
It defaults to on so that if you define BUS_DEBUG in your kernel
then you get all the debugging info when you boot.
It's very useful for disabling all the debugging info when you're
developing a loadable device driver and you're doing lots of loads
and unloads but don't always want to see all the debugging info.
bus/driver/kobj system. I am not 100% sure that this is the correct fix,
but it is harmless and does seem to solve the problem. At worst, it could
cause a tiny memory leak at unload time - this is better than a free(NULL)
and subsequent panic. I'm waiting for comments from Doug about this.
This may yet be backed out and fixed differently.
The change itself is to increment the reference count on drivers in one
case where it appears to have been missed. When everything is unloaded,
kobj_class_free() was being called twice in some cases, and panicing the
second time.
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
takes about 40ns for a method dispatch on a 300Mhz PII which is only
10ns slower than a direct function call on the same hardware.
This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
release for inclusion into the release, but bde talked me out of
committing the module that needs this until after the release. It is
after the release now. :-)
This avoids the unit number from going up indefinitely when
diconnecting and connecting 2 devices alternately.
Noticed by: nsayer (quite a while ago)
And stop calling DEVICE_NOMATCH at probe repeatedly. This stops the
message on the PCI VGA board from being printed when loading a PCI driver.
This unspams the boot messages, concentrating on the drivers that have
actually been probed.
This basically resurrects revision 1.106 from old /sys/i386/isa/isa.c.
Reviewed by: jkh, dfr
device_add_child_ordered(). 'ivars' may now be set using the
device_set_ivars() function.
This makes it easier for us to change how arbitrary data structures are
associated with a device_t. Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.
Despite my best efforts I've probably forgotten something so let me know
if this breaks anything. I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.
Reviewed by: peter, dfr
Hopefully this clears up some confusion about the nature of
devclass_get_softc() vs. device_get_softc() as well.
The check against DS_ATTACHED remains as this is not
a change that modifies functionality.
Reviewed by: Peter "in principle" Wemm
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
add nodes to the tree. Also, default to bus_generic_driver_added for
the BUS_DRIVER_ADDED method.
This allows newbus busses to be kldload'd.
Reviewed by: dfr
the attach/detach to
1) MOD_LOAD before attach
2) MOD_UNLOAD after detach
The driver specific event handler can now be used to function as
driver specific init/deinit function (compare to device specific
init/deinit functions: attach & detach).
stuff: unregister_methods() is horribly broken. The idea, if I'm not mistaken,
is that the refcount on a method is decremented, and only when it reaches
zero is the method freed. However desc->method is set to NULL unconditionally
regardless of the refcount, which means the method pointer is trashed the
first time the method is deallocated. The obvious detrimental effect is
that memory is leaked. The not so obvious effect is that when you call
unregister_method() the second time on the same method, you get a NULL
pointer dereference and a panic.
Now I can successfully unload network device drivers and the miibus module
without crashing the system.
*sigh*
- device_print_child() either lets the BUS_PRINT_CHILD
method produce the entire device announcement message or
it prints "foo0: not found\n"
Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)
Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())
The BUS_PRINT_CHILD method now returns int instead of void.
Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.
- Devices are 'on' a bus, not 'at' it.
- If a custom BUS_PRINT_CHILD method does the same thing
as bus_generic_print_child(), use bus_generic_print_child()
- Use device_get_nameunit() instead of both
device_get_name() and device_get_unit()
- All BUS_PRINT_CHILD methods return the number of
characters output.
Reviewed by: dfr, peter
easier to use and more flexible.
* Change BUS_ADD_CHILD to take an order argument instead of a place.
* Define a partial ordering for isa devices so that sensitive devices are
probed before non-sensitive ones.
