1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
Commit Graph

15632 Commits

Author SHA1 Message Date
Kevin Lo
931a64d439 Xr bktr.4 2014-05-27 06:35:36 +00:00
Christian Brueffer
9bb8172b56 Language cleanup.
Reviewed by:	mav, bcr, wblock
MFC after:	1 week
2014-05-26 19:02:34 +00:00
Julio Merino
17a286a994 Change libatf-c and libatf-c++ to be private libraries.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.

As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system.  Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build.  The offending ports have been fixed to depend on
devel/atf explicitly.

Reviewed by:	bapt
2014-05-25 12:01:13 +00:00
Benjamin Kaduk
ec5d37f4f5 Document taskqueue_start_threads_pinned
Requested by:	adrian
Reviewed by:	adrian
Approved by:	hrs (mentor)
X-MFC-with:	r266629
2014-05-25 02:45:26 +00:00
Warner Losh
79f387daa8 Allow CC to not actually exist. During the ports INDEX run, all the
Makefiles are evaluated without building things. In a normal build,
the prerequisites would be built, and CC would be an actual thing. In
an INDEX build, though, they don't exists. Redirect stderr to get rid
of annoying messages, and assume that the compiler version is 0 if the
actual compiler can't tell us. Do this in preference to guessing based
on numbers because gcc410 might be 4.10, or 4.1.0 and without
carefully crafted special knowledge we differentiate between them
easily (also ming-gcc has no clues at all). Elsewhere, don't trust
the compiler version if it is 0.
2014-05-23 14:34:22 +00:00
Stephen McConnell
33f50a0985 - Add myself to committers-src.dot
Approved by:	ken/scottl (mentors)
2014-05-20 22:11:52 +00:00
Jim Harris
0572ccaa45 Add ismt(4) driver.
ismt(4) supports the SMBus Message Transport controller found on Intel
C2000 series (Avoton) and S1200 series (Briarwood) Atom SoCs.

Sponsored by:	Intel
2014-05-20 19:55:06 +00:00
Simon J. Gerraty
d94068ba0d Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.

Reviewed by:	imp
2014-05-20 18:25:46 +00:00
Simon J. Gerraty
a14f4e2fc1 Revert previous change - doesn't cover all cases. 2014-05-19 21:55:47 +00:00
Simon J. Gerraty
2cf7eab64a _SUBDIR is marked .MAKE - since it runs a sub-make.
Targets thus marked are supposed to run even with -n.
As such they should not do anything except run the sub-make.

Use an intermediate target _* to associate with _SUBDIR and which
depends on installincludes etc so that we get the correct behavior with -n.

Reviewed by:	marcel
2014-05-19 19:08:46 +00:00
Benjamin Kaduk
59be36b0f7 Document some user-settable make variables in ports.7
This is not a comprehensive list, as the variables themselves are spread
out over multiple files, but it is a start.

Add a section to make.conf noting that variables may be set there that
affect ports builds, but refer to ports.7 and elsewhere for the actual
listing; any listing in make.conf.5 would likely become out of date
fairly quickly.

PR:		docs/189199
Reviewed by:	bdrewery (previous version)
Approved by:	hrs (mentor)
2014-05-18 21:05:54 +00:00
Allan Jude
a7b1372283 Note my mentors in the committers graph.
Add my birthday to the calendar.

Approved by:	bcr (mentor)
2014-05-18 04:21:12 +00:00
Warner Losh
34bbee4317 Move inclusion of /etc/make.conf and others to old location (this also
moves local.sys.mk). The new location broke adding things to CXXFLAGS
in /etc/src.conf with +=. Move it back until that's sorted out...
2014-05-17 20:31:40 +00:00
Warner Losh
1f4e0ed969 The time is not yet ripe to break the lack of dependencies between
src/sys and the rest of the tree for builds.
o eliminate including bsd.mkopts.mk for the moment in kern.opts.mk
o No need to include src.opts.mk at all anymore. The reasons for it
  are now coverted in sys.mk and src.sys.mk.
2014-05-17 20:31:34 +00:00
Warner Losh
6b14aaa4d4 Read in SRCCONF early and consistently, if src.sys.mk exists, which is
should for all normal builds. Read /etc/make.conf earlier than before,
but consistently before SRCCONF and local.sys.mk.
2014-05-17 01:47:06 +00:00
Gavin Atkinson
4a98da2cc0 USB endpoints are almost always single-digits, fix the path in the man
page to be clearer.

PR:		docs/175560
Submitted by:	Andreas Gustafsson <gson gson.org>
MFC after:	3 days
2014-05-16 16:28:09 +00:00
Brooks Davis
20e9dd10e8 Remove documention of WITHOUT_NCURSES removed in r266157.
Remove a bit of whitespace from WITHOUT_BINUTILS.

Catch up with a bunch of other commits to tools/build/options that
weren't merged to src.conf.5.
2014-05-15 16:51:45 +00:00
Brooks Davis
525e2a83f6 Revert r261296. This removes the WITHOUT_NCURSESW option.
It was the wrong direction.  We will instead remove use of the
non-wide-character supporting libncurses.
2014-05-15 16:44:25 +00:00
Luiz Otavio O Souza
b6d2fa3ed3 gpioiic.4 and gpioled.4 will first appear in 10.1-RELEASE. 2014-05-14 21:54:14 +00:00
Warren Block
3f239ccec1 Connect vt.4 to the build.
Reviewed by:	emaste
2014-05-14 21:45:16 +00:00
Christian Brueffer
3b4afe73d0 Typo fixes and some language/punctuation improvements. 2014-05-11 10:06:27 +00:00
Warner Losh
cb8b0584f4 Really, I don't want to install src.opts.mk at all. 2014-05-10 21:27:47 +00:00
Warner Losh
7ecf742eeb Move DOCCOMPRESS to MK variable. 2014-05-10 16:38:54 +00:00
Warner Losh
c115b8184e Remove last two NO_MAN= in the tree. In both of these cases, MAN= is
what is needed.
2014-05-10 16:38:37 +00:00
Warner Losh
be4646cf7f Remove some useless, commented out code. Remove name space polution in
the POSIX case by moving more things under !Posix part of an if.
2014-05-10 16:38:32 +00:00
Warner Losh
dfd11a4413 g/c unmaintained, uninstalled bsd.pkg.mk. It tied into the ports
system, as it existed 9 years ago, and has been obsolete for a long
time.
2014-05-10 16:38:27 +00:00
Warner Losh
7273339dc4 Eliminate EARLY_BUILD flag. It is redundant and means MK_CLANG_FULL=no
and MK_LLDB=no, so set those explicitly (now that we can do
that). Simplify tests for these variables as well, since we know they
will always be defined regardless of the phase of the build.
2014-05-10 16:38:03 +00:00
Warner Losh
ab72ce6b1b Migrate NO_WARN to MK_WARN. Support legacy NO_WARN usage. Remove a
check for EARLY_BUILD because it isn't necessary (MK_WARN=no will
always be defined for that).
2014-05-10 16:37:53 +00:00
Warner Losh
999298523e Support, to the extent we generate proper command lines, compiling
with clang 3.3. Useful for test building -current on a -stable system
in individual directories. Potentially useful if we ever want to
support, say, gcc 4.8 or 4.9's new warnings when building with an
external toolchain (but such support not yet committed). Document
the bsd.compiler.mk interface.
2014-05-10 16:37:44 +00:00
Warner Losh
f510ecf0ee Optionally allow building the historical FreeBSD make program and
install it as fmake. This defaults to no. This should be viewed as the
first step towards evental migration of this historic code to ports
and removal from the tree.
2014-05-10 16:37:39 +00:00
Kevin Lo
3e90173173 Fix -width argument to Bl -tag. 2014-05-10 15:34:32 +00:00
Michael Tuexen
6ed8e454a1 UDP-Lite uses SOCK_DGRAM, not SOCK_STREAM. 2014-05-10 13:18:20 +00:00
Warren Block
3bff5e84a7 Fix document title.
Submitted by:	pluknet
2014-05-10 13:10:42 +00:00
Luiz Otavio O Souza
dd75f2c5eb Add the lm75 i2c digital temperature sensor driver.
This driver supports the low and high precision models (9 and 11 bits) and
it will auto-detect the both variants.

The driver expose the temperature registers (actual temperature, shutdown
and hysteresys temperature) and also the configuration register.

It was tested on FDT systems: RPi, BBB and on non-FDT systems: AR71xx, with
both, hardware i2c controllers (when available) and gpioiic(4).

This provides a simple and cheap way for verifying the i2c bus on embedded
systems.
2014-05-10 12:19:02 +00:00
Warren Block
abebc22f2c Add a man page for the new vt.4 device.
Reviewed by:	ray, emaste (slightly earlier version)
2014-05-10 03:24:45 +00:00
Warner Losh
22cac7546c Introduce kern.opts.mk to hold all the options for kernel module
builds. Include this in the right places. Make src.opts.mk optional so
that modules can be built outside of the tree in the ports system.

PR: 189520
2014-05-09 21:11:27 +00:00
Warner Losh
f9798cc7eb We have to include bsd.opts.mk (included in bsd.own.mk) after
/etc/src.conf so that options set there will affect the options
defined in bsd.opts.mk. Fix a few comments while I'm here.
2014-05-09 04:49:48 +00:00
Warner Losh
3ceb1e5386 Spell always the more traditional way. 2014-05-09 04:49:43 +00:00
Christian Brueffer
02e843636a Fix two more typos.
Submitted by:	Trond Endrestol
2014-05-08 21:02:23 +00:00
David C Somayajulu
ed062a309e Modify Copyright information and other strings to reflect Qlogic Corporation's purchase of Broadcom's NetXtreme business.
Added clean option to Makefile

Submitted by:David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
MFC after:5 days
2014-05-08 19:40:37 +00:00
Warner Losh
09df65e474 Put bsd.own.mk back in the list, and take src.opts.mk out.
Fix a silly typo.
2014-05-08 02:24:30 +00:00
Warner Losh
8a863ef3d5 Fix a typo make should have complained about.
Submitted by: Mark Johnston
2014-05-08 02:18:36 +00:00
Christian Brueffer
20f355b2e5 First cleanup pass: new sentence -> new line, mdoc, typos and style. 2014-05-07 18:21:38 +00:00
Warner Losh
bd871f14b7 bsd.compiler.mk was implicitly included by bsd.own.mk in historical
versions. With its movement to src.opts.mk, bsd.prog.mk was testing
COMPILER_TYPE without including the bsd.compiler.mk anymore. In the
source tree, this caused no problems, for reasons that aren't clear,
but does cause problems outside of the source tree. Allow
bsd.compiler.mk to be included multiple times safely, and always
include bsd.compiler.mk at the top of bsd.prog.mk. Resist the urge to
put it in bsd.init.mk, since that would reintroduce the implicit
include.
2014-05-07 18:15:02 +00:00
Warner Losh
5d420b97e6 All the NO_foo options processed in src.opts.mk are really bsd.opts.mk
options, so move their processing there. This fixes issues with
Makefiles that define NO_MAN=t and only inlcude bsd.*.mk files. A few
ports fell into this category, and they should be fixed by this change.
Also, for now, disable the warning about NO_foo being deprecated. More
work is needed than anticipated before we can do that, so kill the
noise for now.
2014-05-07 18:14:56 +00:00
Doug Ambrisko
665484d8f0 Add mrsas(4) driver from LSI official support of newer MegaRAID SAS
cards.  LSI has been maintaining this driver outside of the FreeBSD
tree.  It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports.  By default mfi(4) will attach to cards.  If the tunable:
	hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach.  So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.

mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX.  mfiutil(8) does not work with mrsas.  The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas.  It appears
that StorCli only works with mrsas.  MegaCli appears to work with mfi(4)
and mrsas(4).

It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).

Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.

Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD.  This improves the overall
support of MegaRAID SAS.

Submitted by:	Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by:	scottl
MFC after:	3 days
Sponsored by:	LSI
2014-05-07 16:16:49 +00:00
Warner Losh
d03127447d Remove support for WITHOUT_BMAKE. bmake is now the only make that can
build world, so it is the only make we build or install. fmake is
still in the tree, but disconnected, and upgrades from older systems
that still have bmake has not been removed, but its state has not been
tested (it should work given how minimal the work to upgrade to bmake
is).
2014-05-06 04:22:37 +00:00
Warner Losh
c6063d0da8 Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.
2014-05-06 04:22:01 +00:00
Warner Losh
5e84b765f4 Move the /usr/src specific options to src.opts.mk. Move inclusion of
/etc/src.conf to this file as well. Now, it will only affect builds of
/usr/src and not others that use the bsd.*.mk files. Specifically
don't install src.opts.mk so we can catch when it 'leaks' into
bsd.*.mk again and have there be errors when this happens. Future
commits will move to including src.opts.mk instead of bsd.own.mk when
all that's needed is one of the MK_FOO options from src.opts.mk.
Future options should be placed here, unless they directly affect a
bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
Warner Losh
41603b8357 Simplify use of the semi-bogus EARLY_BUILD variable. Also, simplify
use of semi-bogus NO_WARNS variable. Both of these, in this case,
should collapse to WITHOUT_WARNS in a future commit.
2014-05-05 22:03:08 +00:00
Warner Losh
a18673d42d Introduce CWARNFLAGS.${COMPILER_TYPE} and use that to simplify the
thicket of .if ${COMPILER_TYPE} == "clang" that controls
warnings. Also, use CFLAGS.clang in a couple places in preference to
having a similar construct that's related to the CWARNFLAGS changes.
2014-05-05 22:03:01 +00:00
Warner Losh
9b01449f96 [1] Make WITHOUT_FOO alway trump WITH_FOO, regardless of the system
default. This restores more of the historical expectations that
    were broken when we started disallowing both WITH_FOO and
    WITHOUT_FOO to be defined.
[2] Document this new behavior, and improve the documentation in
    general here.

Submitted by: sjg@ [1].
2014-05-05 22:02:48 +00:00
Christian Brueffer
cb079eed13 Remove stray comma.
MFC after:	3 days
2014-05-05 14:50:44 +00:00
Sergey Kandaurov
4688952ced Expand PGET_WANTREAD. Language fixes.
Submitted by:	jmg
2014-05-04 12:32:37 +00:00
Bryan Venteicher
c23a7a1e16 Fix SYNOPSIS ("device if_vtnet" -> "device vtnet").
Obtained from:	DragonFlyBSD
MFC after:	3 days
2014-05-03 19:57:17 +00:00
Sergey Kandaurov
17f494c00e Documented the pget(9) system kernel interface.
Reviewed by:	trociny, kib
MFC after:	1 week
2014-05-03 18:50:47 +00:00
Christian Brueffer
3613136981 Make the HARDWARE section ready for release notes generation; sort SEE ALSO.
MFC after:	1 week
2014-05-03 15:31:54 +00:00
Christian Brueffer
be0d76eb2b Make this manpage ready for hardware notes generation, add more Xrefs and perform
general cleanup.

In particular, don't claim rsu(4) devices can be configured with hostname(1)...

MFC after:	1 week
2014-05-03 11:34:54 +00:00
Christian Brueffer
d3e6a7f8d4 Add a missing colon. 2014-05-03 11:15:28 +00:00
Christian Brueffer
0c077bad5b Use our standard SYNOPSIS wording; perform some cleanup while here. 2014-05-02 21:14:28 +00:00
Kenneth D. Merry
19e1db1b28 Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.

Submitted by:	Steve McConnell <Stephen.McConnell@lsi.com>
MFC after:	3 days
Sponsored by:	LSI, Spectra Logic
2014-05-02 20:36:20 +00:00
Kenneth D. Merry
991554f2c4 Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.

Some notes about this driver:
 o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
   this driver.

 o WarpDrive functionality has been removed, since it isn't supported in
   the 12Gb driver interface.

 o The Scatter/Gather list handling code is significantly different between
   the 6Gb and 12Gb hardware.  The 12Gb boards support IEEE Scatter/Gather
   lists.

Thanks to LSI for developing and testing this driver for FreeBSD.

share/man/man4/mpr.4:
	mpr(4) man page.

sys/dev/mpr/*:
	mpr(4) driver files.

sys/modules/Makefile,
sys/modules/mpr/Makefile:
	Add a module Makefile for the mpr(4) driver.

sys/conf/files:
	Add the mpr(4) driver.

sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
	Add the mpr(4) driver to all config files that currently
	have the mps(4) driver.

sys/ia64/conf/GENERIC:
	Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
	config file.

sys/i386/conf/XEN:
	Exclude the mpr module from building here.

Submitted by:	Steve McConnell <Stephen.McConnell@lsi.com>
MFC after:	3 days
Tested by:	Chris Reeves <chrisr@spectralogic.com>
Sponsored by:	LSI, Spectra Logic
Relnotes:	LSI 12Gb SAS driver mpr(4) added
2014-05-02 20:25:09 +00:00
Glen Barber
c16bac236c Clarify that MAKEOBJDIRPREFIX and MAKEOBJDIR are not
honored as make(1) arguments.

Requested by:	smh
MFC After:	3 days
Sponsored by:	The FreeBSD Foundation
2014-05-02 15:52:50 +00:00
Eitan Adler
461dbce2d9 lindev(4): remove the device
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD.  /dev/full was never linux-specific and provides a generally useful
feature.

Document this in UPDATING and bump __FreeBSD_version.  This will be documented
in the PH shortly.

Reported by:	jkim
2014-05-02 05:30:49 +00:00
Kevin Lo
18f169af92 Document m_get2().
Reviewed by:	glebius
2014-04-30 08:51:30 +00:00
Kevin Lo
ada46fe963 Change type from int to short to match function prototypes.
Reviewed by:	glebius
2014-04-30 07:17:51 +00:00
Eitan Adler
d39f1c7aee Add missing comma
Relnotes:	yes (/dev/full)
2014-04-30 06:54:35 +00:00
Eitan Adler
279234c33e man pages: add missing comma
Reported by:	brueffer
2014-04-30 06:34:53 +00:00
Eitan Adler
a345aa5953 Add a /dev/full device.
/dev/full is similar to /dev/zero except it always returns
ENOSPC when you attempt to write to it.

Reviewed by:	jhibbits
Discussed with:	rpaulo
2014-04-30 06:20:48 +00:00
Warner Losh
6f9f01a2d8 NLS is used by the build system. 2014-04-29 14:52:39 +00:00
Christian Brueffer
e418b6fd0b Add standard SYNOPSIS wording, fix typos, contractions and new sentence -> new line. 2014-04-29 07:45:21 +00:00
Marcel Moolenaar
67fb10f30c Add proto(4): A driver for prototyping and diagnostics.
It exposes I/O resources to user space, so that programs can peek
and poke at the hardware. It does not itself have knowledge about
the hardware device it attaches to.

Sponsored by:	Juniper Networks, Inc.
2014-04-28 17:58:40 +00:00
Eitan Adler
b2ba559513 bsd-family-tree: Fix date 2014-04-28 06:24:37 +00:00
Warner Losh
2ded1ea292 Generalize FOO.clang to FOO.${COMPILER_TYPE}. There's no reason these
need to be clang specific. Also generalize things a bit.
2014-04-25 19:25:57 +00:00
Warner Losh
7061d0855c Split up the options into those used only by bsd.mk.* or sys.mk and
the rest. Add note of caution for the surprises that popped up. MK_SSP
is the only one used by sys.mk, and it likely needs even extra
attention.
2014-04-25 19:25:53 +00:00
Warner Losh
347c9de056 Eliminate NO_INCS. It is used one place, and MK_TOOLCHAIN=no will
handle the job just as well. Opt for simplicity rather than one more
option.
2014-04-25 19:25:45 +00:00
Warner Losh
c772d4925c Now that all the NO_foo expressed in this loop have been removed from
the tree, start warning that NO_foo is deprecated. It was supposed to
be gone from the tree as a user-setting a long time ago...
2014-04-25 19:25:37 +00:00
Warner Losh
14472d17d7 NO_DEBUG_FILES -> MK_DEBUG_FILES=no in last remaining place. 2014-04-25 19:25:18 +00:00
Kevin Lo
28bc7834e0 Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
Committed over the TP-LINK TL-WN725N v2 (RTL8188EUS) on amd64 with WPA.
2014-04-25 08:01:22 +00:00
Warner Losh
d6d1ee211a Add option WITHOUT_VI to not build/install vi. vi was the largest
binary without a knob to turn it off.
2014-04-24 23:17:40 +00:00
Warner Losh
f6092768b1 Use MK_OPENLDAP in preference to WITH_OPENLDAP and make it a default
NO option to match the opt-in nature of the historical nature of this
option.
2014-04-24 23:17:31 +00:00
Warner Losh
fa3dfa6128 LIBUNBOUND can be unconditionally set. 2014-04-24 21:18:29 +00:00
Warner Losh
1e309af2ef Don't need to make these conditional on MK_LIBCPLUSPLUS. They can be
defined all the time without ill effect.
2014-04-24 21:18:22 +00:00
Warner Losh
54421a3433 LIBMILTER can be defined always. No need to restrict to only when
we're building sendmail.
2014-04-24 21:18:14 +00:00
Warner Losh
02504aec49 Always define LIBLDNS. We don't need to only define it when it is
enabled.
2014-04-24 21:18:06 +00:00
Bryan Venteicher
6d6c1bd231 Update the date that was missed in r263259 2014-04-24 03:31:07 +00:00
Warner Losh
8609cb7bfd Include bsd.opts.mk before Makefile.inc so Makefile.inc can do things
based on MK_xxx symbols. Continue to include bsd.own.mk after
Makefile.inc to preserve current behavior.
2014-04-24 02:02:51 +00:00
John Baldwin
9b997115fb - Format the usage so that it fits in 80 cols and follows the standard
convention for long usage lines in manpages.
- Sort the option string passed to getopts and the case statements for
  the option returned by getopts.
- Add a -C option to specify the device to be used for the console
  (defaults to 'stdio')  (This could be let vmrun be run in the background
  by using /dev/nmdm0B or the like)
- Add a -H option to specify a host path to pass to bhyveload(8) via
  -h to back the host0: filesystem in bhyveload(8) (useful for loading
  kernels from the host into the guest without having to copy them into
  the guest's disk image first)

Reviewed by:	neel
MFC after:	2 weeks
2014-04-23 20:55:07 +00:00
Ian Lepore
b4bb98ed6b Allow .WAIT to appear in SUBDIR= lists, to provide some control over
parallel build order.  All subdirs before a .WAIT will be built before
any subdirs after it.

Reviewed by:	imp@
2014-04-23 12:52:11 +00:00
Glen Barber
5414282b4d urndis(4) will first appear in 9.3-RELEASE.
MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2014-04-21 16:35:19 +00:00
Eitan Adler
a388c42d32 bsd-family-tree: Add missing releases
- NetBSD 6.0.4
- DragonFly 3.6.2
2014-04-21 02:04:37 +00:00
Eitan Adler
f53d329e7c bsd-family-tree: Add NetBSD 6.1.4, 6.0.5
Part of 6.0.4 is still missing: this really needs to be automated
2014-04-20 03:27:38 +00:00
John-Mark Gurney
ad6c0150c0 add a TON of missing event handlers with quite possibly bogus
descrptions... If you're one of the many people who forgot to document
their work and don't like my description, well, do your job and update
it...
2014-04-19 19:32:54 +00:00
Hans Petter Selasky
734cd48ef3 Update UMASS manual page to mention newer host controller drivers.
Submitted by:	Aseem Jolly <aseem.jolly@gmail.com>
2014-04-19 06:32:51 +00:00
Jung-uk Kim
709d846ced Install newly added bsd.mkopt.mk. 2014-04-19 04:59:56 +00:00
John-Mark Gurney
c7c8edc3a2 add link to crypto(4)...
MFC after:	1 week
2014-04-19 01:52:03 +00:00
Warner Losh
04943ab399 Retire compatibility YES_HESIOD. If you haven't upgraded in the last
decade to WITH_HESIOD, your are in for a rude surprise...
2014-04-18 17:04:34 +00:00
Warner Losh
5144b2be23 Move the generic part of bsd.opts.mk into bsd.mkopts.mk to allow for
the WITH/WITHOUT_FOO -> MK_FOO={yes,no} stuff to be used elsewhere.
2014-04-18 17:04:26 +00:00
Warner Losh
4f9fa02d54 Allow setting of MK_FOO by anybody. There are too many edge cases that
we're preventing now with this policy. However, these edge cases
should be rare and all that set MK_FOO directly.
WITH_FOO and WITHOUT_FOO both being defined now result in the
non-default behavior happening silently. Users needing determinism
here fall into the edge case exception for MK_FOO setting.
2014-04-18 17:04:18 +00:00
Warner Losh
6a542ebed9 Copy bsd.own.mk to bsd.opts.mk and separate out the option setting
code from the rest. Include bsd.opts.mk in bsd.own.mk to preserve
current behavior. Future revisions will replace the inclusion of
bsd.own.mk elsewhere with bsd.opts.mk or a more appropriate new
file that's still being finalized.
2014-04-18 17:04:09 +00:00