1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-21 11:13:30 +00:00
Commit Graph

4429 Commits

Author SHA1 Message Date
Max Khon
409a60927b Fix overriding jail_list from command line.
MFC after:	3 days
2006-03-08 20:40:37 +00:00
Matteo Riondato
846bc8c6f4 Fix output and exit status when daily_mailq_shorten is set to YES
PR:		conf/93472
MFC after:	3
2006-03-08 17:26:53 +00:00
Yaroslav Tykhiy
a227277a6d Two years ago, in rev. 1.12, a typo slipped in etc/isdn/Makefile:
a control variable was misspelled as `SCRIPTS_NAME_isdntel.sh'
(should've been `SCRIPTSNAME_isdntel.sh') when the Makefile was
converted to using <bsd.prog.mk>.  Consequently, `isdntel.sh' has
been installed as `isdntel' since then.  Nevertheless, nobody has
been unhappy with the change.  So it's time to make it official.

Approved by:	hm
Pointy hat to:	ru
MFC after:	3 days
2006-03-07 09:53:11 +00:00
Maksim Yevmenkin
dfc1c0ba36 Add new 'setkeyboard' method to the /etc/rc.d/syscons. It accepts the
keyboard device name (i.e. /dev/kbd0). This method will do nothing is
kbdmux(4) is the current active keyboard, otherwise it will switch
active keyboard as requested.

Modify ukbd(4) entries in the /etc/devd.conf to use /etc/rc.d/syscons
and new 'setkeyboard' method.

No comments from:	freebsd-current@
MFC after:		1 day
2006-03-06 06:38:34 +00:00
Matteo Riondato
fe468fe9c0 Enhance loginfail: it will catch sshd, proftpd and su errors, as well as other programs
PR: conf/70973
Submitted by:	Ryan Sommers" <ryans@gamersimpact.com>
Approved by:	philip (mentor)
MFC after:	3 days
2006-03-05 15:45:38 +00:00
Christian Brueffer
20780934c5 Add the graid3(8), gstripe(8) and gconcat(8) status scripts, default is "off".
Approved by:	rwatson (mentor)
2006-03-02 14:46:00 +00:00
Christian Brueffer
9ccfd1e437 Add periodic scripts that check the status of graid3(8), gstripe(8)
and gconcat(8) devices, respectively.

Approved by:	rwatson (mentor)
2006-03-02 14:44:19 +00:00
Hartmut Brandt
9b0f5d5f9a Document how to change the polling interval for the 64-bit interface
counters in case an interface reports the wrong speed via if_mib.
2006-02-27 16:31:01 +00:00
Wojciech A. Koszek
46e6cc852b Use 'ipfw list' instead of 'ipfw l', since it's deprecated (and warning is
printed on system startup).

Approved by:	cognet (mentor)
MFC after:	3 days
2006-02-26 16:45:29 +00:00
Xin LI
a4d159a817 Revert previous change for now. We traditionally add a new locale
directory when we have 10+ ports that make use of it, and now we have
only 3.  This change would come back if the tt/ usage grown up to the
level.

Knowledge provided by:	krion, kris
2006-02-25 22:09:37 +00:00
Xin LI
9945e9d0d9 Add tt locale directory, since more and more ports create and use it. 2006-02-25 21:10:25 +00:00
Doug Barton
2a723c89f8 Attempt to make running the new rc in a jail more automatic by
resetting of early_late_divider to a more appropriate value if
the admin has not modified the default.

Reviewed by:	brooks
2006-02-20 21:54:30 +00:00
Doug Barton
f50a4cf27c Make sure abi (and therefore archdep) start before SERVERS as part of
the ongoing re-alignment of ordering that is necessary as a result of
including local scripts in the base rcorder. [1]

Accomplish this by removing the BEFORE's, and using REQUIRE instead.
This makes the dependencies more obvious, and less susceptible to turning
circular and/or nonsensical when seemingly innocent changes are made
in one place and not another.

Requested by:	delphij [1]
2006-02-19 08:18:48 +00:00
Ruslan Ermilov
2bf76d274f Check if /sbin/nextboot exists before running it.
PR:		93466
Submitted by:	Mats Palmgren
2006-02-17 08:34:01 +00:00
Ceri Davies
960061611e Use example.com rather than bar.com for the system contact example.
Requested by:	glebius
2006-02-16 20:38:09 +00:00
Hajimu UMEMOTO
9512e32664 The libwrap built with NO_INET6=yes cannot parse an IPv6 address.
So, mention it in comment.

Submitted by:	Dmitry Morozovsky <marck__at__rinet.ru>
MFC after:	2 days
2006-02-16 14:46:03 +00:00
Ceri Davies
977cb19587 Update a comment to match functionality changed in r1.39 (allow square
brackets in process names).

MFC after:	2 days
2006-02-15 14:37:35 +00:00
Warner Losh
ef716ed805 Remove vestiges of OLDCARD. 2006-02-14 04:16:56 +00:00
Marcel Moolenaar
1c71a2c535 On ia64, the unaligned_print sysctl is a debugging knob under debug
and not under machdep as the behaviour is controlled by the process.
When PSR.ac is set the process expects to receive a SIGBUS. Otherwise
the processor or the kernel will emulate the misaligned memory access.

MFC after: 3 days
2006-02-13 21:41:32 +00:00
Matteo Riondato
82d95a96b0 Add a default ldconfig32_paths entry in default/rc.conf for 32-bit compatability shared libraries.
It is used by the ldconfig rc.d scripts.
Document this variable in the man page

PR:		amd64/91571
Approved by:	philip (mentor)
MFC after:	3
2006-02-13 21:10:03 +00:00
Warner Losh
1d384e3a1a Since OLDCARD is gone from the kernel, catchup here and remove support
from here as well.
2006-02-13 20:08:31 +00:00
Doug Barton
196b6a193e Overhaul the named boot script:
1. Remove a now-spurious NetBSD CVS Id, as we are no longer synching work
2. Remove a now-spurious BEFORE, since ntpdate now REQUIRE's named
3. Replace the call to set rcvar with what that function would output,
and generally reduce indirection ($name -> named) since it's highly
unlikely the name of the named process or service will change any time soon.
4. Resort the order the variables at the top of the file to a more
traditional format, and remove a spurious required_dirs from the top, as it
works better after load_rc_config.
5. We do not want the default reload method with named, so define a simple
but appropriate substitute using rndc. If I were writing this script for
the first time I would not include this at all, since it's preferable to
control a running daemon with rndc to start with, but given that this is
already here, let's do it right. I hope that future generations will
however resist the tempation to add reconfig to extra_commands.
6. By the same token, we want to use rndc to shut down named, but given
that by defining a stop function we lose the "find the process by its
pid file in an emergency" goodness of rc.subr, try to do something useful
in the event that rndc is not available, and keep the user informed.
7. Replace some "test -f" with "test -r" to handle the unlikely event
that the relevant file exists, but is unreadable.
8. Twiddle whitespace in a few areas, remove a spurious blank line,
a bogus double space, and try to do better indenting.
9. Improve generation of the rndc.key file significantly
a. If for some reason a user has an rndc.conf file, assume that they
did that on purpose, and hence know what they are doing, so leave them alone.
b. Introduce a named_uid configuration variable so that the user which owns
the rndc.key file and the user named runs as always match, and is more
easily configurable. This should dramatically reduce problems with rndc.
c. Also test that the rndc.key file size is greater than zero, rather than
simply that the file exists. I have seen at least one user report this exact
problem, and although neither of us is sure where the empty file came from,
the fix is simple, so include it.
d. Rather than try to create an rndc.key file in both /etc/namedb and the
chroot'ed /etc/namedb, assume that they are be the same (which they should
be), and only create the file in the chroot'ed version of the directory.
This partially addresses the problem described in conf/73929, but I have
not yet finished thinking about the PREFIX issue that PR also raises.

As a result of introducing the named_uid knob, the default named_flags
are now empty.

Update defaults/rc.conf and rc.conf(5) to reflect these changes.
2006-02-13 08:45:51 +00:00
Robert Watson
7db952b8b5 Install audit_control and audit_user, both of which are likely to be
modified by the administrator, as user-writable instead of read-only.

Obtained from:	TrustedBSD Project
2006-02-12 13:01:39 +00:00
Florent Thoumie
54a6effc95 Don't include geli devices in list when noauto is specified in the options field.
Approved by:	pjd
MFC after:	3 days
2006-02-12 12:57:07 +00:00
Matteo Riondato
151903dc6c Make localpkg print local scripts names when the boot is verbose
PR:		conf/68525
Approved by:	philip (mentor)
MFC after:	3 days
2006-02-12 10:04:56 +00:00
Gleb Smirnoff
be2a64bdfa The bar.com is an existing domain. Instead of trying to listen on
64.15.205.248 address, change host to "foobar". This won't be
resolvable in most cases, so administrator will need to change it.
Also do not send our trap messages to 64.15.205.248, use localhost
as default traphost.
2006-02-08 11:55:03 +00:00
Matteo Riondato
2da6fa9f1f When there are no interesting information in output, exit with 0.
PR:		conf/92299
Submitted by:	Petr Rehor <prehor@gmail.com>
Approved by:	philip (mentor)
MFC after:	3 days
2006-02-07 08:21:06 +00:00
Max Laier
d662ee1c20 pflog is a separate module now.
Submitted by:	Antoine Brodin
PR:		kern/88271
MFC after:	1 week
2006-02-05 22:38:08 +00:00
Robert Watson
cd573a850c Assign gid 77 to audit instead of gid 73. The ports group list did not
include '73', which was assigned in a ports passwd entry to ircservices.

Pointed out by:	ceri
2006-02-05 19:34:09 +00:00
Ceri Davies
f944e9be98 The rpc.pcnfsd server was in the base for a little over seven minutes
back in 1994.  Change the example entry to point at the port, as per
the entries for uucpd et al.
2006-02-05 19:23:05 +00:00
Robert Watson
5ba29bf644 Change group for /var/audit to audit, so that audit review can be
delegated to non-administrators.

Obtained from:	TrustedBSD Project
2006-02-05 18:22:56 +00:00
Robert Watson
bbcf7c3697 Allocate an 'audit' group, membership in which will grant the audit
review right by virtue of read file permission on /var/audit and its
contents.

Obtained from:	TrustedBSD Project
2006-02-05 18:04:39 +00:00
Marius Strobl
2e47800d98 Enable getty(8) on ttyu2 by default in order to get machines that use a
RSC (Remote System Control) connected via uart2 as console working out
of the box. On machines that use uart2 to connect a keyboard and thus
the ttyu2 node doesn't exist this will trigger a warning from getty(8)
but cause no real harm.

MFC after:	1 week
2006-02-04 23:30:09 +00:00
Florent Thoumie
b03bfd3552 - Add a startup script for hostapd.
- Document associated variable in rc.conf(5).

Approved by:	dougb
MFC after:	1 week
2006-02-03 01:35:36 +00:00
Robert Watson
28024c0c6b Install /etc/security configuration files from OpenBSM.
Obtained from:	TrustedBSD Project
2006-02-02 10:03:43 +00:00
Robert Watson
e0e0ae286e Add auditd rc.d script.
Submitted by:	trhodes
Obtained from:	TrustedBSD Project
2006-02-02 10:02:55 +00:00
Robert Watson
e62911a34f Add auditd_enable and auditd_flags rc.d scripts.
Obtained from:	TrustedBSD Project
2006-02-02 10:02:19 +00:00
Robert Watson
2d61cce037 Add /var/audit, mode 750, which will hold audit trail files.
Obtained from:	TrustedBSD Project
2006-02-02 01:19:31 +00:00
Matteo Riondato
a192a4640a Make df output more consistent:
Remove -k now that -h is present
use -l instead of -t nonfs to match smbfs too [1]
PR:	conf/50956 [1]
Approved by:	philip (mentor)
MFC after:	3 days
2006-01-30 19:23:24 +00:00
Matteo Riondato
2bf3c1f587 Make df output in periodic mail human readable
PR:		conf/87196
Submitted by:	Mike <mspam@ideaway.net>
Approved by:	philip (mentor)
MFC after:	3 days
2006-01-30 12:33:44 +00:00
Nate Lawson
410d3bd3ac Enable the lowest Cx state by default. This will save power and we have
had enough testing of acpi_cpu to know this is stable now.
2006-01-29 05:51:58 +00:00
Max Laier
4591afafab Document the user/group LOR in our sample pf.conf
Submitted by:	Devon H. O'Dell
2006-01-27 17:16:20 +00:00
Maxim Konovalov
deb3633dfa o Add IANA assigned InterBase Database Remote Protocol 3050/tcp/udp.
PR:		conf/92319
Submitted by:	skv
MFC after:	1 week
2006-01-25 17:37:15 +00:00
Alexander Leidinger
77a1d1e153 As a quick fix disable the update of the linux ld.so.cache file, since
currently it grabs some FreeBSD native libs too.

A final solution is under discussion with brooks.
2006-01-24 18:58:48 +00:00
Pawel Jakub Dawidek
219d40fbb1 The 'reload' command did the same as 'restart' command.
Allow user to decide if SAD and SPD entries should be flushed on 'reload'.
With this change flush/spdflush is not done automatically (it could still
be done from ipsec.conf).
2006-01-24 15:16:55 +00:00
Pawel Jakub Dawidek
76098314b0 Remove stale comment.
This change should be made in rev1.9.

MFC after:	1 week
2006-01-24 15:12:44 +00:00
Pawel Jakub Dawidek
2d7b446560 Use $ipsec_file instead of hardcoded /etc/ipsec.conf.
This change should be made in rev1.2.

MFC after:	1 week
2006-01-24 15:11:11 +00:00
Matteo Riondato
90036dd784 Add gettytab entry for 3wire 19200 baud console
PR:		conf/90346
Submitted by:	Gavin Atkinson <gavin.atkinson@ury.york.ac.uk>
Approved by:	philip (mentor)
MFC after:	3 days
2006-01-22 15:33:16 +00:00
Maxim Konovalov
eb6b185e1e o Add 406.status-gmirror, sort.
Submitted by:	brueffer
2006-01-21 20:16:30 +00:00
Yaroslav Tykhiy
24c307eac7 Add an rc.d script for stand-alone ftpd.
Document the script's controls on the rc.conf(5)
manpage and touch its Dd.

PR:		conf/90893
MFC after:	5 days
2006-01-21 18:08:16 +00:00