tracing process to obtain information about the LWP that caused the
traced process to stop. Debuggers can use this information to select
the thread currently running on the LWP as the current thread.
The request has been made compatible with NetBSD for as much as
possible. This implementation differs from NetBSD in the following
ways:
1. The data argument is allowed to be smaller than the size of the
ptrace_lwpinfo structure known to the kernel, but not 0. This
is opposite to what NetBSD allows. The reason for this is that
we can extend the structure without affecting older binaries.
2. On NetBSD the tracing process is to set the pl_lwpid field to
the Id of the LWP it wants information of. We don't do that.
Our ptrace interface allows passing the LWP Id instead of the
PID. The tracing process is to set the PID to the LWP Id it
wants information of.
3. When the PID is actually the PID of the tracing process, this
request returns the information about the LWP that caused the
process to stop. This was the whole purpose of the request in
the first place.
When the traced process has exited, this request will return the
LWP Id 0, indicating that the process state is not the result of
an event specific to a LWP.
from exit1(). sched_exit() must be called unconditionally from exit1().
It was called almost unconditionally because the only exits on system
shutdown if at all.
(2) Removed the comment that presumed to know what sched_exit() does.
sched_exit() does different things for the ULE case. The call became
essential when it started doing load average stuff, but its caller
should not know that.
(3) Didn't fix bugs caused by bitrot in the condition. The condition was
last correct in rev.1.208 when it was in wait1(). There p was spelled
curthread->td_proc and was for the waiting parent; now p is for the
exiting child. The condition was to avoid lowering init's priority.
It should be in sched_exit() itself. Lowering of priorities is broken
in other ways in at least the 4BSD scheduler, and doing it for init
causes less noticeable problems than doing it for for shells.
Noticed by: julian (1)
be suspended in thread_suspend_check, after they are resumed, all
threads will call thread_single, but only one can be success,
others should retry and will exit in thread_suspend_check.
of not clearing the flags for execv() syscall will result that a new
program runs in KSE thread mode without enabling it.
Submitted by: tjr
Modified by: davidxu
options, status pointer and rusage pointer as arguments. It is up to
the caller to copyout the status and rusage to userland if needed. This
lets us axe the 'compat' argument and hide all that functionality in
owait(), by the way. This also cleans up some locking in kern_wait()
since it no longer has to drop locks around copyout() since all the
copyout()'s are deferred.
- Convert owait(), wait4(), and the various ABI compat wait() syscalls to
use kern_wait() rather than wait1() or wait4(). This removes a bit
more stackgap usage.
Tested on: i386
Compiled on: i386, alpha, amd64
in the two consumers that need it.. processes using AIO and netncp.
Update docs. Say that process_exec is called with Giant, but not to
depend on it. All our consumers can handle it without Giant.
- no longer serialize on Giant for thread_single*() and family in fork,
exit and exec
- thread_wait() is mpsafe, assert no Giant
- reduce scope of Giant in exit to not cover thread_wait and just do
vm_waitproc().
- assert that thread_single() family are not called with Giant
- remove the DROP/PICKUP_GIANT macros from thread_single() family
- assert that thread_suspend_check() s not called with Giant
- remove manual drop_giant hack in thread_suspend_check since we know it
isn't held.
- remove the DROP/PICKUP_GIANT macros from thread_suspend_check() family
- mark kse_create() mpsafe
- Push Giant down a bit in coredump() and call coredump() with the proc
lock already held rather than unlocking it only to turn around and
relock it.
Requested by: peter
the process state to zombie when a process exits to avoid a lock order
reversal with the sleepqueue locks. This appears to be the only place
that we call wakeup() with sched_lock held.
set to SIGCHLD. This avoids the creation of orphaned Linux-threaded
zombies that init is unable to reap. This can occur when the parent
process sets its SIGCHLD to SIG_IGN. Fix a similar situation in the
PT_DETACH code.
Tested by: "Steven Hartland" <killing AT multiplay.co.uk>
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
Presumably, at some point, you had to include jail.h if you included
proc.h, but that is no longer required.
Result of: self injury involving adding something to struct prison
in exit1(), make sure the p_klist is empty after sending NOTE_EXIT.
The process won't report fork() or execve() and won't be able to handle
NOTE_SIGNAL knotes anyway.
This fixes some race conditions with do_tdsignal() calling knote() while
the process is exiting.
Reported by: Stefan Farfeleder <stefan@fafoe.narf.at>
MFC after: 1 week
is currently executing when we try to remove it in exit1(). Without this,
it was possible for the callout to bogusly rearm itself and eventually
refire after the process had been free'd resulting in a panic.
PR: kern/51964
Reported by: Jilles Tjoelker <jilles@stack.nl>
Reviewed by: tegge, bde
- Move struct sigacts out of the u-area and malloc() it using the
M_SUBPROC malloc bucket.
- Add a small sigacts_*() API for managing sigacts structures: sigacts_alloc(),
sigacts_free(), sigacts_copy(), sigacts_share(), and sigacts_shared().
- Remove the p_sigignore, p_sigacts, and p_sigcatch macros.
- Add a mutex to struct sigacts that protects all the members of the struct.
- Add sigacts locking.
- Remove Giant from nosys(), kill(), killpg(), and kern_sigaction() now
that sigacts is locked.
- Several in-kernel functions such as psignal(), tdsignal(), trapsignal(),
and thread_stopped() are now MP safe.
Reviewed by: arch@
Approved by: re (rwatson)
fini routines instead of in fork() and wait(). This has the nice side
benefit that the proc lock of any process on the allproc list is always
valid and sched_lock doesn't have to be used to test against PRS_NEW
anymore.
of ksegs since they primarily operation on processes.
- KSEs take ticks so pass the kse through sched_clock().
- Add a sched_class() routine that adjusts a ksegrp pri class.
- Define a sched_fork_{kse,thread,ksegrp} and sched_exit_{kse,thread,ksegrp}
that will be used to tell the scheduler about new instances of these
structures within the same process. These will be used by THR and KSE.
- Change sched_4bsd to reflect this API update.
if (p->p_numthreads > 1) and not a flag because action is only necessary
if there are other threads. The rest of the system has no need to
identify thr threaded processes.
- In kern_thread.c use thr_exit1() instead of thread_exit() if P_THREADED
is not set.
a follow on commit to kern_sig.c
- signotify() now operates on a thread since unmasked pending signals are
stored in the thread.
- PS_NEEDSIGCHK moves to TDF_NEEDSIGCHK.
flexible process_fork, process_exec, and process_exit eventhandlers. This
reduces code duplication and also means that I don't have to go duplicate
the eventhandler locking three more times for each of at_fork, at_exec, and
at_exit.
Reviewed by: phk, jake, almost complete silence on arch@
struct proc as p_tracecred alongside the current cache of the vnode in
p_tracep. This credential is then used for all later ktrace operations on
this file rather than using the credential of the current thread at the
time of each ktrace event.
- Now that we have multiple ktrace-related items in struct proc that are
pointers, rename p_tracep to p_tracevp to make it less ambiguous.
Requested by: rwatson (1)
it from its pgrp to avoid leaving zombies around with p_pgrp == NULL.
This bug was apparent as a NULL-dereference in the pid selection code
in fork1().
sched_lock around accesses to p_stats->p_timer[] to avoid a potential
race with hardclock. getitimer(), setitimer() and the realitexpire()
callout are now Giant-free.
barrier between free'ing filedesc structures. Basically if you want to
access another process's filedesc, you want to hold this mutex over the
entire operation.
I'm not convinced there is anything major wrong with the patch but
them's the rules..
I am using my "David's mentor" hat to revert this as he's
offline for a while.
data structure called kse_upcall to manage UPCALL. All KSE binding
and loaning code are gone.
A thread owns an upcall can collect all completed syscall contexts in
its ksegrp, turn itself into UPCALL mode, and takes those contexts back
to userland. Any thread without upcall structure has to export their
contexts and exit at user boundary.
Any thread running in user mode owns an upcall structure, when it enters
kernel, if the kse mailbox's current thread pointer is not NULL, then
when the thread is blocked in kernel, a new UPCALL thread is created and
the upcall structure is transfered to the new UPCALL thread. if the kse
mailbox's current thread pointer is NULL, then when a thread is blocked
in kernel, no UPCALL thread will be created.
Each upcall always has an owner thread. Userland can remove an upcall by
calling kse_exit, when all upcalls in ksegrp are removed, the group is
atomatically shutdown. An upcall owner thread also exits when process is
in exiting state. when an owner thread exits, the upcall it owns is also
removed.
KSE is a pure scheduler entity. it represents a virtual cpu. when a thread
is running, it always has a KSE associated with it. scheduler is free to
assign a KSE to thread according thread priority, if thread priority is changed,
KSE can be moved from one thread to another.
When a ksegrp is created, there is always N KSEs created in the group. the
N is the number of physical cpu in the current system. This makes it is
possible that even an userland UTS is single CPU safe, threads in kernel still
can execute on different cpu in parallel. Userland calls kse_create to add more
upcall structures into ksegrp to increase concurrent in userland itself, kernel
is not restricted by number of upcalls userland provides.
The code hasn't been tested under SMP by author due to lack of hardware.
Reviewed by: julian
dereferenced when a process exits due to the vmspace ref-count being
bumped. Change shmexit() and shmexit_myhook() to take a vmspace instead
of a process and call it in vmspace_dofree(). This way if it is missed
in exit1()'s early-resource-free it will still be caught when the zombie is
reaped.
Also fix a potential race in shmexit_myhook() by NULLing out
vmspace->vm_shm prior to calling shm_delete_mapping() and free().
MFC after: 7 days
