1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00
Commit Graph

127 Commits

Author SHA1 Message Date
Enji Cooper
a2a45f908a Fix the build after ifconfig was converted over to lib80211 in r291470
Reported by: jenkins, O. Hartmann <ohartman@zedat.fu-berlin.de>
Pointyhat to: adrian
2015-11-30 16:34:13 +00:00
John Baldwin
7f911abe54 Add support to libkvm for reading vmcores from other architectures.
- Add a kvaddr_type to represent kernel virtual addresses instead of
  unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
  that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
  is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles().  It drops the
  unused 'swapfile' argument and adds a new function pointer argument for
  a symbol resolving function.  Native kernels still use _fdnlist() from
  libc to resolve symbols if a resolver function is not supplied, but cross
  kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
  struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
  kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
  Each backend is responsible for implementing kvm_read2() for a given
  vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
  powerpc cores).
- Add internal helper routines for the common page offset hash table used
  by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
  to be cross-friendly by using private constants instead of ones that
  vary by platform (e.g. PAGE_SIZE).  Static assertions are present when
  a given backend is compiled natively to ensure the private constants
  match the real ones.
- Enable all of the existing vmcore backends on all platforms.  This means
  that libkvm on any platform should be able to perform KVA translation
  and read data from a vmcore of any platform.

Tested on:	amd64, i386, sparc64 (marius)
Differential Revision:	https://reviews.freebsd.org/D3341
2015-11-27 18:58:26 +00:00
Enji Cooper
46839d1247 Make iscsictl and iscsid build if MK_ISCSI == yes
MFC after: 1 month
X-MFC with: r289452
2015-10-17 21:11:42 +00:00
Edward Tomasz Napierala
defd502f1f Add iscsictl(8) and iscsid(8) to rescue(8). The point is to make it
easier to build md_root images from rescue(8), to use with iSCSI boot.

The change increases the size of rescue by 62kB, from 8728kB to 8790kB.

Reviewed by:	bapt@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3865
2015-10-17 13:00:34 +00:00
Bryan Drewery
ec766071e3 META_MODE: Remove DEP_MACHINE from Makefile.depend files.
This has not been needed since r246865 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:44:01 +00:00
Bryan Drewery
54c7d75a06 META_MODE: Remove DEP_RELDIR from Makefile.depend files.
This has not been needed since r284171 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:26:08 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Simon J. Gerraty
13172aa205 Removed extra line 2015-06-10 05:30:13 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
Kenneth D. Merry
43518607b2 Significant upgrades to sa(4) and mt(1).
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.

Significant changes and new features include:

 o sa(4) driver status and parameter information is now exported via an
   XML structure.  This will allow for changes and improvements later
   on that will not break userland applications.  The old MTIOCGET
   status ioctl remains, so applications using the existing interface
   will not break.

 o 'mt status' now reports drive-reported tape position information
   as well as the previously available calculated tape position
   information.  These numbers will be different at times, because
   the drive-reported block numbers are relative to BOP (Beginning
   of Partition), but the block numbers calculated previously via
   sa(4) (and still provided) are relative to the last filemark.
   Both numbers are now provided.  'mt status' now also shows the
   drive INQUIRY information, serial number and any position flags
   (BOP, EOT, etc.) provided with the tape position information.
   'mt status -v' adds information on the maximum possible I/O size,
   and the underlying values used to calculate it.

 o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.

   The extra devices were originally added as place holders for
   density-specific device nodes.  Some OSes (NetBSD, NetApp's OnTap
   and Solaris) have had device nodes that, when you write to them,
   will automatically select a given density for particular tape drives.

   This is a convenient way of switching densities, but it was never
   implemented in FreeBSD.  Only the device nodes were there, and that
   sometimes confused users.

   For modern tape devices, the density is generally not selectable
   (e.g. with LTO) or defaults to the highest availble density when
   the tape is rewritten from BOT (e.g. TS11X0).  So, for most users,
   density selection won't be necessary.  If they do need to select
   the density, it is easy enough to use 'mt density' to change it.

 o Protection information is now supported.  This is either a
   Reed-Solomon CRC or CRC32 that is included at the end of each block
   read and written.  On write, the tape drive verifies the CRC, and
   on read, the tape drive provides a CRC for the userland application
   to verify.

 o New, extensible tape driver parameter get/set interface.

 o Density reporting information.  For drives that support it,
   'mt getdensity' will show detailed information on what formats the
   tape drive supports, and what formats the tape drive supports.

 o Some mt(1) functionality moved into a new mt(3) library so that
   external applications can reuse the code.

 o The new mt(3) library includes helper routines to aid in parsing
   the XML output of the sa(4) driver, and build a tree of driver
   metadata.

 o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
   (write filemark immediate) ioctls needed by IBM's LTFS
   implementation.

 o Improve device departure behavior for the sa(4) driver.  The previous
   implementation led to hangs when the device was open.

 o This has been tested on the following types of drives:
	IBM TS1150
	IBM TS1140
	IBM LTO-6
	IBM LTO-5
	HP LTO-2
	Seagate DDS-4
	Quantum DLT-4000
	Exabyte 8505
	Sony DDS-2

contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
	Add libmt.

lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
	New mt(3) library that contains functions moved from mt(1) and
	new functions needed to interact with the updated sa(4) driver.

	This includes XML parser helper functions that application writers
	can use when writing code to query tape parameters.

rescue/rescue/Makefile:
	Add -lmt to CRUNCH_LIBS.

src/share/man/man4/mtio.4
	Clarify this man page a bit, and since it contains what is
	essentially the mtio.h header file, add new ioctls and structure
	definitions from mtio.h.

src/share/man/man4/sa.4
	Update BUGS and maintainer section.

sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
	Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
	functions.

sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
	Many tape driver changes, largely outlined above.

	Increase the sa(4) driver read/write timeout from 4 to 32
	minutes.  This is based on the recommended values for IBM LTO
	5/6 drives.  This may also avoid timeouts for other tape
	hardware that can take a long time to do retries and error
	recovery.  Longer term, a better way to handle this is to ask
	the drive for recommended timeout values using the REPORT
	SUPPORTED OPCODES command.  Modern IBM and Oracle tape drives
	at least support that command, and it would allow for more
	accurate timeout values.

	Add XML status generation.  This is done with a series of
	macros to eliminate as much duplicate code as possible.  The
	new XML-based status values are reported through the new
	MTIOCEXTGET ioctl.

	Add XML driver parameter reporting, using the new MTIOCPARAMGET
	ioctl.

	Add a new driver parameter setting interface, using the new
	MTIOCPARAMSET and MTIOCSETLIST ioctls.

	Add a new MTIOCRBLIM ioctl to get block limits information.

	Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
	and scsi_read_position_10().

	scsi_locate_10 implements the LOCATE command, as does the
	existing scsi_set_position() command.  It just supports
	additional arguments and features.  If/when we figure out a
	good way to provide backward compatibility for older
	applications using the old function API, we can just revamp
	scsi_set_position().  The same goes for
	scsi_read_position_10() and the existing scsi_read_position()
	function.

	Revamp sasetpos() to take the new mtlocate structure as an
	argument.  It now will use either scsi_locate_10() or
	scsi_locate_16(), depending upon the arguments the user
	supplies.  As before, once we change position we don't have a
	clear idea of what the current logical position of the tape
	drive is.

	For tape drives that support long form position data, we
	read the current position and store that for later reporting
	after changing the position.  This should help applications
	like Bacula speed tape access under FreeBSD once they are
	modified to support the new ioctls.

	Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
	drives that report SCSI-2 or older, as well as drives that
	report an Illegal Request type error for READ POSITION with
	the long format.  So we should automatically detect drives
	that don't support the long form and stop asking for it after
	an initial try.

	Add a partition number to the sa(4) softc.

	Improve device departure handling. The previous implementation
	led to hangs when the device was open.

	If an application had the sa(4) driver open, and attempted to
	close it after it went away, the cam_periph_release() call in
	saclose() would cause the periph to get destroyed because that
	was the last reference to it.  Because destroy_dev() was
	called from the sa(4) driver's cleanup routine (sacleanup()),
	and would block waiting for the close to happen, a deadlock
	would result.

	So instead of calling destroy_dev() from the cleanup routine,
	call destroy_dev_sched_cb() from saoninvalidate() and wait for
	the callback.

	Acquire a reference for devfs in saregister(), and release it
	in the new sadevgonecb() routine when all devfs devices for
	the particular sa(4) driver instance are gone.

	Add a new function, sasetupdev(), to centralize setting
	per-instance devfs device parameters instead of repeating the
	code in saregister().

	Add an open count to the softc, so we know how many
	peripheral driver references are a result of open
       	sessions.

	Add the D_TRACKCLOSE flag to the cdevsw flags so
	that we get a 1:1 mapping of open to close calls
	instead of a N:1 mapping.

	This should be a no-op for everything except the
	control device, since we don't allow more than one
	open on non-control devices.

	However, since we do allow multiple opens on the
	control device, the combination of the open count
	and the D_TRACKCLOSE flag should result in an
	accurate peripheral driver reference count, and an
	accurate open count.

	The accurate open count allows us to release all
	peripheral driver references that are the result
	of open contexts once we get the callback from devfs.

sys/sys/mtio.h:
	Add a number of new mt(4) ioctls and the requisite data
	structures.  None of the existing interfaces been removed
	or changed.

	This includes definitions for the following new ioctls:

	MTIOCRBLIM      /* get block limits */
	MTIOCEXTLOCATE	/* seek to position */
	MTIOCEXTGET     /* get tape status */
	MTIOCPARAMGET	/* get tape params */
	MTIOCPARAMSET	/* set tape params */
	MTIOCSETLIST	/* set N params */

usr.bin/mt/Makefile:
	mt(1) now depends on libmt, libsbuf and libbsdxml.

usr.bin/mt/mt.1:
	Document new mt(1) features and subcommands.

usr.bin/mt/mt.c:
	Implement support for mt(1) subcommands that need to
	use getopt(3) for their arguments.

	Implement a new 'mt status' command to replace the old
	'mt status' command.  The old status command has been
	renamed 'ostatus'.

	The new status function uses the MTIOCEXTGET ioctl, and
	therefore parses the XML data to determine drive status.
	The -x argument to 'mt status' allows the user to dump out
	the raw XML reported by the kernel.

	The new status display is mostly the same as the old status
	display, except that it doesn't print the redundant density
	mode information, and it does print the current partition
	number and position flags.

	Add a new command, 'mt locate', that will supersede the
	old 'mt setspos' and 'mt sethpos' commands.  'mt locate'
	implements all of the functionality of the MTIOCEXTLOCATE
	ioctl, and allows the user to change the logical position
	of the tape drive in a number of ways.  (Partition,
	block number, file number, set mark number, end of data.)
	The immediate bit and the explicit address bits are
	implemented, but not documented in the man page.

	Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
	This allows the user to ask the drive to write a filemark
	without waiting around for the operation to complete.

	Add a new 'mt getdensity' command that gets the XML-based
	tape drive density report from the sa(4) driver and displays
	it.  This uses the SCSI REPORT DENSITY SUPPORT command
	to get comprehensive information from the tape drive about
	what formats it is able to read and write.

	Add a new 'mt protect' command that allows getting and setting
	tape drive protection information.  The protection information
	is a CRC tacked on to the end of every read/write from and to
	the tape drive.

Sponsored by:	Spectra Logic
MFC after:	1 month
2015-02-23 21:59:30 +00:00
Rui Paulo
532000256b Merge xz 5.2.0.
This brings support for multi-threaded compression.  This brings close
N times faster compression where N is the number of CPU cores.
Because of this, liblzma now depends on libthr.

Soon libarchive will be modified to use the new lzma API.

Thanks to antoine@ for the exp-run.

Differential Revision:	 https://reviews.freebsd.org/D1786
Reviewed by:	bapt
2015-02-09 06:20:34 +00:00
Enji Cooper
c50bf0f337 Only build vi support into rescue if MK_VI != no
Sponsored by: EMC / Isilon Storage Division
2015-01-25 00:30:22 +00:00
Xin LI
e8b00d3d65 Add sleep(1) to /rescue. This adds 664 bytes to the binary on amd64 but
it's pretty useful for shell scripts.

MFC after:	1 month
Sponsored by:	iXsystems, Inc.
2014-12-03 01:34:24 +00:00
Simon J. Gerraty
9268022b74 Merge from head@274682 2014-11-19 01:07:58 +00:00
Marcel Moolenaar
5c96e2461d Add libxo, now needed by df(1).
Pointed out by: rodrigc@ (thanks!)
2014-11-07 04:39:01 +00:00
Yoshihiro Takahashi
6d1ddf7734 Remove duplicate prog. 2014-09-28 08:59:38 +00:00
Xin LI
4c75e22659 Add zdb into rescue environment.
On amd64, this would increase the binary size by 1.1MiB and
make it possible to examine zpool status offline, useful for
recovery and diagnostic purposes.

Submitted by:	sef
Obtained from:	FreeNAS
MFC after:	2 weeks
2014-08-20 00:14:41 +00:00
Simon J. Gerraty
ee7b0571c2 Merge head from 7/28 2014-08-19 06:50:54 +00:00
Dimitry Andric
02b6306fb0 In r232153, libarchive 3.0.3 was imported, replacing the archive_hash.h
header with archive_crypto_private.h, and its ARCHIVE_HASH_xxx macros
were renamed to ARCHIVE_CRYPTO_xxx.

Rename these macros in lib/libarchive/config_freebsd.h, to re-enable the
hashes for libarchive again.  This affects the mtree format writer, and
the xar format reader and writer modules.

This also requires changes in the library order for statically linking
rescue, otherwise ld would complain about redefined symbols.  Thanks to
jkim for pointing out the solution.

Reviewed by:	kientzle
MFC after:	1 week
2014-07-26 15:33:20 +00:00
Brooks Davis
80189b3b09 Replace all uses of libncurses and libtermcap with their wide character
variants.  This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.

Exp-run:	antoine
PR:		189842
Discussed with:	bapt
Sponsored by:	DARPA, AFRL
2014-07-17 18:24:34 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Warner Losh
4af3fa1438 Minor style nits... 2014-05-23 00:20:57 +00:00
Simon J. Gerraty
cc3f4b9965 Merge from head 2014-05-08 23:54:15 +00:00
Warner Losh
c6063d0da8 Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.
2014-05-06 04:22:01 +00:00
Bryan Drewery
076e25142a - Fix build WITHOUT_ZFS/WITHOUT_CDDL after r265229, bin/ps needs libjail.
MFC after:	2 weeks
X-MFC-with:	r265229
2014-05-02 20:45:34 +00:00
Simon J. Gerraty
3b8f084595 Merge head 2014-04-28 07:50:45 +00:00
Warner Losh
3bdf775801 NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
2014-04-13 05:21:56 +00:00
Gleb Smirnoff
2c284d9395 Remove IPX support.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.

Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
2014-03-14 02:58:48 +00:00
Simon J. Gerraty
d1d0158641 Merge from head 2013-09-05 20:18:59 +00:00
Davide Italiano
237abf0c56 - Trim an unused and bogus Makefile for mount_smbfs.
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
2013-06-28 21:00:08 +00:00
Xin LI
e946bdbe31 Add less to rescue build. On amd64, this increases rescue size by about
130KB or 2.4%.

MFC after:	1 month
2013-05-13 22:16:33 +00:00
Simon J. Gerraty
69e6d7b75e sync from head 2013-04-12 20:48:55 +00:00
Alexander Motin
45f6d66569 Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0.  Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam.  Remove the
atacontrol utility and some man pages.  Remove useless now options ATA_CAM.

No objections:	current@, stable@
MFC after:	never
2013-04-04 07:12:24 +00:00
Martin Matuska
dce1a726f2 WiP merge of libzfs_core (MFV r238590, r238592)
not yet working, ioctl handling needs to be changed
2013-03-05 08:09:53 +00:00
Simon J. Gerraty
7cd2dcf076 Updated/new Makefile.depend 2012-11-08 21:24:17 +00:00
Attilio Rao
2e564269d0 Disconnect non-MPSAFE SMBFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.

In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.

Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.

This is not targeted for MFC.
2012-10-18 12:04:56 +00:00
Attilio Rao
a42ac676f5 Disconnect non-MPSAFE NTFS from the build in preparation for dropping
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.

In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.

This is not targeted for MFC.
2012-10-17 11:30:00 +00:00
Attilio Rao
e6116d5b8e Disconnect non-MPSAFE NWFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.

In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.

This is not targeted for MFC.
2012-10-17 11:16:17 +00:00
Baptiste Daroussin
078c62cdf6 unbreak build: rescue now needs -ljail if MK_ZFS is on 2012-09-20 08:50:39 +00:00
Martin Matuska
e9832bb1da Partial MFV (illumos-gate 13753:2aba784c276b)
2762 zpool command should have better support for feature flags

References:
https://www.illumos.org/issues/2762

MFC after:	2 weeks
2012-07-30 23:14:24 +00:00
Robert Millan
9697f9f801 Disable jail support in ifconfig when either building a rescue
image or MK_JAIL knob has been set to "no".

Reviewed by:	bz
Approved by:	adrian (mentor)
2012-02-14 07:14:42 +00:00
Max Khon
61d3e021e4 -lreadline is not required anymore. 2011-11-29 03:27:09 +00:00
Max Khon
555f93b667 -lpthread is required by -lzfs so should be later in LIBS list.
There were no "undefined symbol pthread_xxx" errors during the link before
this fix only because of STATIC_LIB_REQUIRE() declarations in
lib/libthr/thread/thr_init.c.
2011-11-28 15:44:04 +00:00
Dag-Erling Smørgrav
20f8f67976 Add netcat (nc) to /rescue.
MFC after:	3 weeks
2011-11-15 16:20:39 +00:00
Pawel Jakub Dawidek
10b9d77bf1 Finally... Import the latest open-source ZFS version - (SPA) 28.
Few new things available from now on:

- Data deduplication.
- Triple parity RAIDZ (RAIDZ3).
- zfs diff.
- zpool split.
- Snapshot holds.
- zpool import -F. Allows to rewind corrupted pool to earlier
  transaction group.
- Possibility to import pool in read-only mode.

MFC after:	1 month
2011-02-27 19:41:40 +00:00
Adrian Chadd
169733f46d Break out the rules which generate crunchgen'ed binaries into a separate
.mk file so they can be reused.

Introduce a new option, CRUNCH_BUILDTOOLS, which lists the binaries that
require tools built in the local architecture. sh and csh both require this.
It was previously hardcoded in rescue/rescue/Makefile .

Introduce a new option, CRUNCH_SHLIBS, which lists the shared libraries
to link against. These override the static libraries listed in CRUNCH_LIBS.
Some build environments may wish to use a handful of shared libraries
(eg libc.so) so other small, dynamic binaries can be run in the environment.

Remove the now-shared code from rescue/rescue/Makefile and introduce the
CRUNCH_BUILDTOOLS option for the above shells.
2010-11-13 03:11:27 +00:00
Warner Losh
25faff346c MFtbemd:
Prefer MACHNE_CPUARCH to MACHINE_ARCH in most contexts where you want
to test of all the CPUs of a given family conform.
2010-08-23 22:24:11 +00:00
Martin Matuska
7fbeb03eb7 Enable liblzma support in libarchive
Adjust dependencies for programs using libarchive
Add xz and linkage against liblzma to rescue system

Approved by:	kientzle, delphij (mentor)
MFC after:	2 weeks
2010-05-10 15:28:44 +00:00
Ed Schouten
84bee0d7fb Remove libulog from the bootstrap again.
libulog now only provides functions that are used by various packages
from the ports tree, namely the libutempter ones. There is no reason to
link it into the crunch/fixit binaries anymore.
2010-01-21 16:56:27 +00:00
Ed Schouten
454939f33e Unbreak rescue(8). We should also link against libulog now. 2009-12-05 23:23:46 +00:00