mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-21 11:13:30 +00:00
668 lines
17 KiB
C
668 lines
17 KiB
C
/***********************************************************************
|
|
;* File Name : TEK390.H *
|
|
;* TEKRAM DC-390 PCI SCSI Bus Master Host Adapter *
|
|
;* Device Driver *
|
|
;***********************************************************************/
|
|
|
|
#ifndef TEK390_H
|
|
#define TEK390_H
|
|
|
|
typedef unsigned char UCHAR;
|
|
typedef unsigned short USHORT;
|
|
typedef unsigned long ULONG;
|
|
typedef unsigned int UINT;
|
|
|
|
typedef UCHAR *PUCHAR;
|
|
typedef USHORT *PUSHORT;
|
|
typedef ULONG *PULONG;
|
|
typedef struct scsi_link *PSCLINK, SCSILINK;
|
|
typedef struct scsi_xfer *PSCSICMD, SCSICMD;
|
|
typedef void *PVOID;
|
|
|
|
|
|
/*;-----------------------------------------------------------------------*/
|
|
typedef struct _SyncMsg
|
|
{
|
|
UCHAR ExtendMsg;
|
|
UCHAR ExtMsgLen;
|
|
UCHAR SyncXferReq;
|
|
UCHAR Period;
|
|
UCHAR ReqOffset;
|
|
} SyncMsg;
|
|
/*;-----------------------------------------------------------------------*/
|
|
typedef struct _Capacity
|
|
{
|
|
ULONG BlockCount;
|
|
ULONG BlockLength;
|
|
} Capacity;
|
|
/*;-----------------------------------------------------------------------*/
|
|
typedef struct _SGentry
|
|
{
|
|
ULONG SGXLen;
|
|
ULONG SGXPtr;
|
|
} SGentry, *PSEG;
|
|
|
|
typedef struct _SGentry1
|
|
{
|
|
ULONG SGXPtr1;
|
|
ULONG SGXLen1;
|
|
} SGentry1, *PSEG1;
|
|
|
|
|
|
#define MAX_ADAPTER_NUM 4
|
|
#define MAX_SCSI_ID 8
|
|
#define MAX_SG_ENTRY 33
|
|
#define MAX_DEVICES 10
|
|
#define MAX_CMD_QUEUE 20
|
|
#define MAX_CMD_PER_LUN 6
|
|
#define MAX_SRB_CNT MAX_CMD_PER_LUN*4
|
|
#define PAGELEN 4096
|
|
|
|
/*
|
|
;-----------------------------------------------------------------------
|
|
; SCSI Request Block
|
|
;-----------------------------------------------------------------------
|
|
*/
|
|
struct _SRB
|
|
{
|
|
UCHAR CmdBlock[12];
|
|
|
|
struct _SRB *pNextSRB;
|
|
struct _DCB *pSRBDCB;
|
|
PSCSICMD pcmd;
|
|
PSEG pSegmentList;
|
|
|
|
ULONG PhysSRB;
|
|
ULONG TotalXferredLen;
|
|
ULONG SGPhysAddr; /*;a segment starting address */
|
|
ULONG SGToBeXferLen; /*; to be xfer length */
|
|
ULONG Segment0[2];
|
|
ULONG Segment1[2];
|
|
|
|
SGentry SGsegment[MAX_SG_ENTRY];
|
|
SGentry Segmentx; /* make a one entry of S/G list table */
|
|
|
|
PUCHAR pMsgPtr;
|
|
USHORT SRBState;
|
|
USHORT Revxx2; /* ??? */
|
|
|
|
UCHAR MsgInBuf[6];
|
|
UCHAR MsgOutBuf[6];
|
|
|
|
UCHAR AdaptStatus;
|
|
UCHAR TargetStatus;
|
|
UCHAR MsgCnt;
|
|
UCHAR EndMessage;
|
|
UCHAR TagNumber;
|
|
UCHAR SGcount;
|
|
UCHAR SGIndex;
|
|
UCHAR IORBFlag; /*;81h-Reset, 2-retry */
|
|
|
|
UCHAR SRBStatus;
|
|
UCHAR RetryCnt;
|
|
UCHAR SRBFlag; /*; b0-AutoReqSense,b6-Read,b7-write */
|
|
/*; b4-settimeout,b5-Residual valid */
|
|
UCHAR ScsiCmdLen;
|
|
UCHAR ScsiPhase;
|
|
UCHAR Reserved3[3]; /*;for dword alignment */
|
|
};
|
|
|
|
typedef struct _SRB DC390_SRB, *PSRB;
|
|
|
|
/*
|
|
;-----------------------------------------------------------------------
|
|
; Device Control Block
|
|
;-----------------------------------------------------------------------
|
|
*/
|
|
struct _DCB
|
|
{
|
|
struct _DCB *pNextDCB;
|
|
struct _ACB *pDCBACB;
|
|
|
|
PSRB pWaitingSRB;
|
|
PSRB pWaitLast;
|
|
PSRB pGoingSRB;
|
|
PSRB pGoingLast;
|
|
PSRB pActiveSRB;
|
|
USHORT GoingSRBCnt;
|
|
USHORT WaitSRBCnt; /* ??? */
|
|
|
|
ULONG TagMask;
|
|
|
|
USHORT MaxCommand;
|
|
USHORT AdaptIndex; /*; UnitInfo struc start */
|
|
USHORT UnitIndex; /*; nth Unit on this card */
|
|
UCHAR UnitSCSIID; /*; SCSI Target ID (SCSI Only) */
|
|
UCHAR UnitSCSILUN; /*; SCSI Log. Unit (SCSI Only) */
|
|
|
|
UCHAR IdentifyMsg;
|
|
UCHAR CtrlR1;
|
|
UCHAR CtrlR3;
|
|
UCHAR CtrlR4;
|
|
|
|
UCHAR InqDataBuf[8];
|
|
UCHAR CapacityBuf[8];
|
|
UCHAR DevMode;
|
|
UCHAR AdpMode;
|
|
UCHAR SyncMode; /*; 0:async mode */
|
|
UCHAR NegoPeriod; /*;for nego. */
|
|
UCHAR SyncPeriod; /*;for reg. */
|
|
UCHAR SyncOffset; /*;for reg. and nego.(low nibble) */
|
|
UCHAR UnitCtrlFlag;
|
|
UCHAR DCBFlag;
|
|
UCHAR DevType;
|
|
UCHAR Reserved2[3]; /*;for dword alignment */
|
|
};
|
|
|
|
typedef struct _DCB DC390_DCB, *PDCB;
|
|
/*
|
|
;-----------------------------------------------------------------------
|
|
; Adapter Control Block
|
|
;-----------------------------------------------------------------------
|
|
*/
|
|
struct _ACB
|
|
{
|
|
ULONG PhysACB;
|
|
struct _ACB *pNextACB;
|
|
USHORT IOPortBase;
|
|
USHORT Revxx1; /* ??? */
|
|
|
|
PDCB pLinkDCB;
|
|
PDCB pDCBRunRobin;
|
|
PDCB pActiveDCB;
|
|
PDCB pDCB_free;
|
|
PSRB pFreeSRB;
|
|
PSRB pTmpSRB;
|
|
USHORT SRBCount;
|
|
USHORT AdapterIndex; /*; nth Adapter this driver */
|
|
USHORT max_id;
|
|
USHORT max_lun;
|
|
SCSILINK ScsiLink;
|
|
|
|
UCHAR msgin123[4];
|
|
UCHAR status;
|
|
UCHAR AdaptSCSIID; /*; Adapter SCSI Target ID */
|
|
UCHAR AdaptSCSILUN; /*; Adapter SCSI LUN */
|
|
UCHAR DeviceCnt;
|
|
UCHAR IRQLevel;
|
|
UCHAR TagMaxNum;
|
|
UCHAR ACBFlag;
|
|
UCHAR Gmode2;
|
|
UCHAR LUNchk;
|
|
UCHAR scan_devices;
|
|
UCHAR HostID_Bit;
|
|
UCHAR Reserved1[1]; /*;for dword alignment */
|
|
UCHAR DCBmap[MAX_SCSI_ID];
|
|
DC390_DCB DCB_array[MAX_DEVICES]; /* +74h, Len=3E8 */
|
|
DC390_SRB SRB_array[MAX_SRB_CNT]; /* +45Ch, Len= */
|
|
DC390_SRB TmpSRB;
|
|
};
|
|
|
|
typedef struct _ACB DC390_ACB, *PACB;
|
|
|
|
/*;-----------------------------------------------------------------------*/
|
|
|
|
|
|
#define BIT31 0x80000000
|
|
#define BIT30 0x40000000
|
|
#define BIT29 0x20000000
|
|
#define BIT28 0x10000000
|
|
#define BIT27 0x08000000
|
|
#define BIT26 0x04000000
|
|
#define BIT25 0x02000000
|
|
#define BIT24 0x01000000
|
|
#define BIT23 0x00800000
|
|
#define BIT22 0x00400000
|
|
#define BIT21 0x00200000
|
|
#define BIT20 0x00100000
|
|
#define BIT19 0x00080000
|
|
#define BIT18 0x00040000
|
|
#define BIT17 0x00020000
|
|
#define BIT16 0x00010000
|
|
#define BIT15 0x00008000
|
|
#define BIT14 0x00004000
|
|
#define BIT13 0x00002000
|
|
#define BIT12 0x00001000
|
|
#define BIT11 0x00000800
|
|
#define BIT10 0x00000400
|
|
#define BIT9 0x00000200
|
|
#define BIT8 0x00000100
|
|
#define BIT7 0x00000080
|
|
#define BIT6 0x00000040
|
|
#define BIT5 0x00000020
|
|
#define BIT4 0x00000010
|
|
#define BIT3 0x00000008
|
|
#define BIT2 0x00000004
|
|
#define BIT1 0x00000002
|
|
#define BIT0 0x00000001
|
|
|
|
/*;---UnitCtrlFlag */
|
|
#define UNIT_ALLOCATED BIT0
|
|
#define UNIT_INFO_CHANGED BIT1
|
|
#define FORMATING_MEDIA BIT2
|
|
#define UNIT_RETRY BIT3
|
|
|
|
/*;---UnitFlags */
|
|
#define DASD_SUPPORT BIT0
|
|
#define SCSI_SUPPORT BIT1
|
|
#define ASPI_SUPPORT BIT2
|
|
|
|
/*;----SRBState machine definition */
|
|
#define SRB_FREE 0
|
|
#define SRB_WAIT BIT0
|
|
#define SRB_READY BIT1
|
|
#define SRB_MSGOUT BIT2 /*;arbitration+msg_out 1st byte*/
|
|
#define SRB_MSGIN BIT3
|
|
#define SRB_MSGIN_MULTI BIT4
|
|
#define SRB_COMMAND BIT5
|
|
#define SRB_START_ BIT6 /*;arbitration+msg_out+command_out*/
|
|
#define SRB_DISCONNECT BIT7
|
|
#define SRB_DATA_XFER BIT8
|
|
#define SRB_XFERPAD BIT9
|
|
#define SRB_STATUS BIT10
|
|
#define SRB_COMPLETED BIT11
|
|
#define SRB_ABORT_SENT BIT12
|
|
#define DO_SYNC_NEGO BIT13
|
|
#define SRB_UNEXPECT_RESEL BIT14
|
|
|
|
/*;---ACBFlag */
|
|
#define RESET_DEV BIT0
|
|
#define RESET_DETECT BIT1
|
|
#define RESET_DONE BIT2
|
|
|
|
/*;---DCBFlag */
|
|
#define ABORT_DEV_ BIT0
|
|
|
|
/*;---SRBstatus */
|
|
#define SRB_OK BIT0
|
|
#define ABORTION BIT1
|
|
#define OVER_RUN BIT2
|
|
#define UNDER_RUN BIT3
|
|
#define PARITY_ERROR BIT4
|
|
#define SRB_ERROR BIT5
|
|
|
|
/*;---SRBFlag */
|
|
#define DATAOUT BIT7
|
|
#define DATAIN BIT6
|
|
#define RESIDUAL_VALID BIT5
|
|
#define ENABLE_TIMER BIT4
|
|
#define RESET_DEV0 BIT2
|
|
#define ABORT_DEV BIT1
|
|
#define AUTO_REQSENSE BIT0
|
|
|
|
/*;---Adapter status */
|
|
#define H_STATUS_GOOD 0
|
|
#define H_SEL_TIMEOUT 0x11
|
|
#define H_OVER_UNDER_RUN 0x12
|
|
#define H_UNEXP_BUS_FREE 0x13
|
|
#define H_TARGET_PHASE_F 0x14
|
|
#define H_INVALID_CCB_OP 0x16
|
|
#define H_LINK_CCB_BAD 0x17
|
|
#define H_BAD_TARGET_DIR 0x18
|
|
#define H_DUPLICATE_CCB 0x19
|
|
#define H_BAD_CCB_OR_SG 0x1A
|
|
#define H_ABORT 0x0FF
|
|
|
|
/*; SCSI Status byte codes*/
|
|
#define SCSI_STAT_GOOD 0x0 /*; Good status */
|
|
#define SCSI_STAT_CHECKCOND 0x02 /*; SCSI Check Condition */
|
|
#define SCSI_STAT_CONDMET 0x04 /*; Condition Met */
|
|
#define SCSI_STAT_BUSY 0x08 /*; Target busy status */
|
|
#define SCSI_STAT_INTER 0x10 /*; Intermediate status */
|
|
#define SCSI_STAT_INTERCONDMET 0x14 /*; Intermediate condition met */
|
|
#define SCSI_STAT_RESCONFLICT 0x18 /*; Reservation conflict */
|
|
#define SCSI_STAT_CMDTERM 0x22 /*; Command Terminated */
|
|
#define SCSI_STAT_QUEUEFULL 0x28 /*; Queue Full */
|
|
|
|
#define SCSI_STAT_UNEXP_BUS_F 0xFD /*; Unexpect Bus Free */
|
|
#define SCSI_STAT_BUS_RST_DETECT 0xFE /*; Scsi Bus Reset detected */
|
|
#define SCSI_STAT_SEL_TIMEOUT 0xFF /*; Selection Time out */
|
|
|
|
/*;---Sync_Mode */
|
|
#define SYNC_DISABLE 0
|
|
#define SYNC_ENABLE BIT0
|
|
#define SYNC_NEGO_DONE BIT1
|
|
#define WIDE_ENABLE BIT2
|
|
#define WIDE_NEGO_DONE BIT3
|
|
#define EN_TAG_QUEUING BIT4
|
|
#define EN_ATN_STOP BIT5
|
|
|
|
#define SYNC_NEGO_OFFSET 15
|
|
|
|
/*;---SCSI bus phase*/
|
|
#define SCSI_DATA_OUT_ 0
|
|
#define SCSI_DATA_IN_ 1
|
|
#define SCSI_COMMAND 2
|
|
#define SCSI_STATUS_ 3
|
|
#define SCSI_NOP0 4
|
|
#define SCSI_NOP1 5
|
|
#define SCSI_MSG_OUT 6
|
|
#define SCSI_MSG_IN 7
|
|
|
|
/*;----SCSI MSG BYTE*/
|
|
#define MSG_COMPLETE 0x00
|
|
#define MSG_EXTENDED 0x01
|
|
#define MSG_SAVE_PTR 0x02
|
|
#define MSG_RESTORE_PTR 0x03
|
|
#define MSG_DISCONNECT 0x04
|
|
#define MSG_INITIATOR_ERROR 0x05
|
|
#define MSG_ABORT 0x06
|
|
#define MSG_REJECT_ 0x07
|
|
#define MSG_NOP 0x08
|
|
#define MSG_PARITY_ERROR 0x09
|
|
#define MSG_LINK_CMD_COMPL 0x0A
|
|
#define MSG_LINK_CMD_COMPL_FLG 0x0B
|
|
#define MSG_BUS_RESET 0x0C
|
|
#define MSG_ABORT_TAG 0x0D
|
|
#define MSG_SIMPLE_QTAG 0x20
|
|
#define MSG_HEAD_QTAG 0x21
|
|
#define MSG_ORDER_QTAG 0x22
|
|
#define MSG_IDENTIFY 0x80
|
|
#define MSG_HOST_ID 0x0C0
|
|
|
|
/*;----SCSI STATUS BYTE*/
|
|
#define STATUS_GOOD 0x00
|
|
#define CHECK_CONDITION_ 0x02
|
|
#define STATUS_BUSY 0x08
|
|
#define STATUS_INTERMEDIATE 0x10
|
|
#define RESERVE_CONFLICT 0x18
|
|
|
|
/* cmd->result */
|
|
#define STATUS_MASK_ 0xFF
|
|
#define MSG_MASK 0xFF00
|
|
#define RETURN_MASK 0xFF0000
|
|
|
|
/*
|
|
** Inquiry Data format
|
|
*/
|
|
|
|
typedef struct _SCSIInqData { /* INQ */
|
|
|
|
UCHAR DevType; /* Periph Qualifier & Periph Dev Type*/
|
|
UCHAR RMB_TypeMod; /* rem media bit & Dev Type Modifier */
|
|
UCHAR Vers; /* ISO, ECMA, & ANSI versions */
|
|
UCHAR RDF; /* AEN, TRMIOP, & response data format*/
|
|
UCHAR AddLen; /* length of additional data */
|
|
UCHAR Res1; /* reserved */
|
|
UCHAR Res2; /* reserved */
|
|
UCHAR Flags; /* RelADr,Wbus32,Wbus16,Sync,etc. */
|
|
UCHAR VendorID[8]; /* Vendor Identification */
|
|
UCHAR ProductID[16]; /* Product Identification */
|
|
UCHAR ProductRev[4]; /* Product Revision */
|
|
|
|
|
|
} SCSI_INQDATA, *PSCSI_INQDATA;
|
|
|
|
|
|
/* Inquiry byte 0 masks */
|
|
|
|
|
|
#define SCSI_DEVTYPE 0x1F /* Peripheral Device Type */
|
|
#define SCSI_PERIPHQUAL 0xE0 /* Peripheral Qualifier */
|
|
|
|
|
|
/* Inquiry byte 1 mask */
|
|
|
|
#define SCSI_REMOVABLE_MEDIA 0x80 /* Removable Media bit (1=removable) */
|
|
|
|
|
|
/* Peripheral Device Type definitions */
|
|
|
|
#define SCSI_DASD 0x00 /* Direct-access Device */
|
|
#define SCSI_SEQACESS 0x01 /* Sequential-access device */
|
|
#define SCSI_PRINTER 0x02 /* Printer device */
|
|
#define SCSI_PROCESSOR 0x03 /* Processor device */
|
|
#define SCSI_WRITEONCE 0x04 /* Write-once device */
|
|
#define SCSI_CDROM 0x05 /* CD-ROM device */
|
|
#define SCSI_SCANNER 0x06 /* Scanner device */
|
|
#define SCSI_OPTICAL 0x07 /* Optical memory device */
|
|
#define SCSI_MEDCHGR 0x08 /* Medium changer device */
|
|
#define SCSI_COMM 0x09 /* Communications device */
|
|
#define SCSI_NODEV 0x1F /* Unknown or no device type */
|
|
|
|
/*
|
|
** Inquiry flag definitions (Inq data byte 7)
|
|
*/
|
|
|
|
#define SCSI_INQ_RELADR 0x80 /* device supports relative addressing*/
|
|
#define SCSI_INQ_WBUS32 0x40 /* device supports 32 bit data xfers */
|
|
#define SCSI_INQ_WBUS16 0x20 /* device supports 16 bit data xfers */
|
|
#define SCSI_INQ_SYNC 0x10 /* device supports synchronous xfer */
|
|
#define SCSI_INQ_LINKED 0x08 /* device supports linked commands */
|
|
#define SCSI_INQ_CMDQUEUE 0x02 /* device supports command queueing */
|
|
#define SCSI_INQ_SFTRE 0x01 /* device supports soft resets */
|
|
|
|
|
|
/*
|
|
;==========================================================
|
|
; EEPROM byte offset
|
|
;==========================================================
|
|
*/
|
|
typedef struct _EEprom
|
|
{
|
|
UCHAR EE_MODE1;
|
|
UCHAR EE_SPEED;
|
|
UCHAR xx1;
|
|
UCHAR xx2;
|
|
} EEprom, *PEEprom;
|
|
|
|
#define EE_ADAPT_SCSI_ID 64
|
|
#define EE_MODE2 65
|
|
#define EE_DELAY 66
|
|
#define EE_TAG_CMD_NUM 67
|
|
|
|
/*; EE_MODE1 bits definition*/
|
|
#define PARITY_CHK_ BIT0
|
|
#define SYNC_NEGO_ BIT1
|
|
#define EN_DISCONNECT_ BIT2
|
|
#define SEND_START_ BIT3
|
|
#define TAG_QUEUING_ BIT4
|
|
|
|
/*; EE_MODE2 bits definition*/
|
|
#define MORE2_DRV BIT0
|
|
#define GREATER_1G BIT1
|
|
#define RST_SCSI_BUS BIT2
|
|
#define ACTIVE_NEGATION BIT3
|
|
#define NO_SEEK BIT4
|
|
#define LUN_CHECK BIT5
|
|
|
|
#define ENABLE_CE 1
|
|
#define DISABLE_CE 0
|
|
#define EEPROM_READ 0x80
|
|
|
|
/*
|
|
;==========================================================
|
|
; AMD 53C974 Registers bit Definition
|
|
;==========================================================
|
|
*/
|
|
/*
|
|
;====================
|
|
; SCSI Register
|
|
;====================
|
|
*/
|
|
|
|
/*; Command Reg.(+0CH) */
|
|
#define DMA_COMMAND BIT7
|
|
#define NOP_CMD 0
|
|
#define CLEAR_FIFO_CMD 1
|
|
#define RST_DEVICE_CMD 2
|
|
#define RST_SCSI_BUS_CMD 3
|
|
#define INFO_XFER_CMD 0x10
|
|
#define INITIATOR_CMD_CMPLTE 0x11
|
|
#define MSG_ACCEPTED_CMD 0x12
|
|
#define XFER_PAD_BYTE 0x18
|
|
#define SET_ATN_CMD 0x1A
|
|
#define RESET_ATN_CMD 0x1B
|
|
#define SELECT_W_ATN 0x42
|
|
#define SEL_W_ATN_STOP 0x43
|
|
#define EN_SEL_RESEL 0x44
|
|
#define SEL_W_ATN2 0x46
|
|
#define DATA_XFER_CMD INFO_XFER_CMD
|
|
|
|
|
|
/*; SCSI Status Reg.(+10H) */
|
|
#define INTERRUPT BIT7
|
|
#define ILLEGAL_OP_ERR BIT6
|
|
#define PARITY_ERR BIT5
|
|
#define COUNT_2_ZERO BIT4
|
|
#define GROUP_CODE_VALID BIT3
|
|
#define SCSI_PHASE_MASK (BIT2+BIT1+BIT0)
|
|
|
|
/*; Interrupt Status Reg.(+14H) */
|
|
#define SCSI_RESET_ BIT7
|
|
#define INVALID_CMD BIT6
|
|
#define DISCONNECTED BIT5
|
|
#define SERVICE_REQUEST BIT4
|
|
#define SUCCESSFUL_OP BIT3
|
|
#define RESELECTED BIT2
|
|
#define SEL_ATTENTION BIT1
|
|
#define SELECTED BIT0
|
|
|
|
/*; Internal State Reg.(+18H) */
|
|
#define SYNC_OFFSET_FLAG BIT3
|
|
#define INTRN_STATE_MASK (BIT2+BIT1+BIT0)
|
|
|
|
/*; Clock Factor Reg.(+24H) */
|
|
#define CLK_FREQ_40MHZ 0
|
|
#define CLK_FREQ_35MHZ (BIT2+BIT1+BIT0)
|
|
#define CLK_FREQ_30MHZ (BIT2+BIT1)
|
|
#define CLK_FREQ_25MHZ (BIT2+BIT0)
|
|
#define CLK_FREQ_20MHZ BIT2
|
|
#define CLK_FREQ_15MHZ (BIT1+BIT0)
|
|
#define CLK_FREQ_10MHZ BIT1
|
|
|
|
/*; Control Reg. 1(+20H) */
|
|
#define EXTENDED_TIMING BIT7
|
|
#define DIS_INT_ON_SCSI_RST BIT6
|
|
#define PARITY_ERR_REPO BIT4
|
|
#define SCSI_ID_ON_BUS (BIT2+BIT1+BIT0)
|
|
|
|
/*; Control Reg. 2(+2CH) */
|
|
#define EN_FEATURE BIT6
|
|
#define EN_SCSI2_CMD BIT3
|
|
|
|
/*; Control Reg. 3(+30H) */
|
|
#define ID_MSG_CHECK BIT7
|
|
#define EN_QTAG_MSG BIT6
|
|
#define EN_GRP2_CMD BIT5
|
|
#define FAST_SCSI BIT4 /* ;10MB/SEC */
|
|
#define FAST_CLK BIT3 /* ;25 - 40 MHZ */
|
|
|
|
/*; Control Reg. 4(+34H) */
|
|
#define EATER_12NS 0
|
|
#define EATER_25NS BIT7
|
|
#define EATER_35NS BIT6
|
|
#define EATER_0NS (BIT7+BIT6)
|
|
#define NEGATE_REQACKDATA BIT2
|
|
#define NEGATE_REQACK BIT3
|
|
/*
|
|
;====================
|
|
; DMA Register
|
|
;====================
|
|
*/
|
|
/*; DMA Command Reg.(+40H) */
|
|
#define READ_DIRECTION BIT7
|
|
#define WRITE_DIRECTION 0
|
|
#define EN_DMA_INT BIT6
|
|
#define MAP_TO_MDL BIT5
|
|
#define DMA_DIAGNOSTIC BIT4
|
|
#define DMA_IDLE_CMD 0
|
|
#define DMA_BLAST_CMD BIT0
|
|
#define DMA_ABORT_CMD BIT1
|
|
#define DMA_START_CMD (BIT1+BIT0)
|
|
|
|
/*; DMA Status Reg.(+54H) */
|
|
#define PCI_MS_ABORT BIT6
|
|
#define BLAST_COMPLETE BIT5
|
|
#define SCSI_INTERRUPT BIT4
|
|
#define DMA_XFER_DONE BIT3
|
|
#define DMA_XFER_ABORT BIT2
|
|
#define DMA_XFER_ERROR BIT1
|
|
#define POWER_DOWN BIT0
|
|
|
|
/*
|
|
; DMA SCSI Bus and Ctrl.(+70H)
|
|
;EN_INT_ON_PCI_ABORT
|
|
*/
|
|
|
|
/*
|
|
;==========================================================
|
|
; SCSI Chip register address offset
|
|
;==========================================================
|
|
*/
|
|
#define CtcReg_Low 0x00
|
|
#define CtcReg_Mid 0x04
|
|
#define ScsiFifo 0x08
|
|
#define ScsiCmd 0x0C
|
|
#define Scsi_Status 0x10
|
|
#define INT_Status 0x14
|
|
#define Sync_Period 0x18
|
|
#define Sync_Offset 0x1C
|
|
#define CtrlReg1 0x20
|
|
#define Clk_Factor 0x24
|
|
#define CtrlReg2 0x2C
|
|
#define CtrlReg3 0x30
|
|
#define CtrlReg4 0x34
|
|
#define CtcReg_High 0x38
|
|
#define DMA_Cmd 0x40
|
|
#define DMA_XferCnt 0x44
|
|
#define DMA_XferAddr 0x48
|
|
#define DMA_Wk_ByteCntr 0x4C
|
|
#define DMA_Wk_AddrCntr 0x50
|
|
#define DMA_Status 0x54
|
|
#define DMA_MDL_Addr 0x58
|
|
#define DMA_Wk_MDL_Cntr 0x5C
|
|
#define DMA_ScsiBusCtrl 0x70
|
|
|
|
#define StcReg_Low CtcReg_Low
|
|
#define StcReg_Mid CtcReg_Mid
|
|
#define Scsi_Dest_ID Scsi_Status
|
|
#define Scsi_TimeOut INT_Status
|
|
#define Intern_State Sync_Period
|
|
#define Current_Fifo Sync_Offset
|
|
#define StcReg_High CtcReg_High
|
|
|
|
#define am_target Scsi_Status
|
|
#define am_timeout INT_Status
|
|
#define am_seq_step Sync_Period
|
|
#define am_fifo_count Sync_Offset
|
|
|
|
|
|
#define DC390_read8(address) \
|
|
inb(DC390_ioport + (address)))
|
|
|
|
#define DC390_read16(address) \
|
|
inw(DC390_ioport + (address)))
|
|
|
|
#define DC390_read32(address) \
|
|
inl(DC390_ioport + (address)))
|
|
|
|
#define DC390_write8(address,value) \
|
|
outb((value), DC390_ioport + (address)))
|
|
|
|
#define DC390_write16(address,value) \
|
|
outw((value), DC390_ioport + (address)))
|
|
|
|
#define DC390_write32(address,value) \
|
|
outl((value), DC390_ioport + (address)))
|
|
|
|
|
|
/* Configuration method #1 */
|
|
#define PCI_CFG1_ADDRESS_REG 0xcf8
|
|
#define PCI_CFG1_DATA_REG 0xcfc
|
|
#define PCI_CFG1_ENABLE 0x80000000
|
|
#define PCI_CFG1_TUPPLE(bus, device, function, register) \
|
|
(PCI_CFG1_ENABLE | (((bus) << 16) & 0xff0000) | \
|
|
(((device) << 11) & 0xf800) | (((function) << 8) & 0x700)| \
|
|
(((register) << 2) & 0xfc))
|
|
|
|
/* Configuration method #2 */
|
|
#define PCI_CFG2_ENABLE_REG 0xcf8
|
|
#define PCI_CFG2_FORWARD_REG 0xcfa
|
|
#define PCI_CFG2_ENABLE 0x0f0
|
|
#define PCI_CFG2_TUPPLE(function) \
|
|
(PCI_CFG2_ENABLE | (((function) << 1) & 0xe))
|
|
|
|
|
|
#endif /* TEK390_H */
|