1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/conf/kmod.mk
Ruslan Ermilov f165cb7c5d Further embellish rev. 1.180: protect against -fno-strict-aliasing
being already in CFLAGS (as is the case with "make buildkernel").

NB: rev. 1.180 is only needed due to a broken setting of CFLAGS in
tinderbox.
2005-02-11 21:04:20 +00:00

407 lines
9.8 KiB
Makefile

# From: @(#)bsd.prog.mk 5.26 (Berkeley) 6/25/91
# $FreeBSD$
#
# The include file <bsd.kmod.mk> handles building and installing loadable
# kernel modules.
#
#
# +++ variables +++
#
# CLEANFILES Additional files to remove for the clean and cleandir targets.
#
# EXPORT_SYMS A list of symbols that should be exported from the module,
# or the name of a file containing a list of symbols, or YES
# to export all symbols. If not defined, no symbols are
# exported.
#
# KMOD The name of the kernel module to build.
#
# KMODDIR Base path for kernel modules (see kld(4)). [/boot/kernel]
#
# KMODOWN Module file owner. [${BINOWN}]
#
# KMODGRP Module file group. [${BINGRP}]
#
# KMODMODE Module file mode. [${BINMODE}]
#
# KMODLOAD Command to load a kernel module [/sbin/kldload]
#
# KMODUNLOAD Command to unload a kernel module [/sbin/kldunload]
#
# MFILES Optionally a list of interfaces used by the module.
# This file contains a default list of interfaces.
#
# PROG The name of the kernel module to build.
# If not supplied, ${KMOD}.ko is used.
#
# SRCS List of source files.
#
# DESTDIR The tree where the module gets installed. [not set]
#
# +++ targets +++
#
# install:
# install the kernel module; if the Makefile
# does not itself define the target install, the targets
# beforeinstall and afterinstall may also be used to cause
# actions immediately before and after the install target
# is executed.
#
# load:
# Load a module.
#
# unload:
# Unload a module.
#
AWK?= awk
KMODLOAD?= /sbin/kldload
KMODUNLOAD?= /sbin/kldunload
OBJCOPY?= objcopy
.if defined(KMODDEPS)
.error "Do not use KMODDEPS on 5.0+; use MODULE_VERSION/MODULE_DEPEND"
.endif
.include <bsd.init.mk>
.SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S
.if ${CC} == "icc"
CFLAGS:= ${CFLAGS:C/(-x[^M^K^W]+)[MKW]+|-x[MKW]+/\1/}
.else
. if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing)
CFLAGS+= -fno-strict-aliasing
. endif
WERROR?= -Werror
.endif
CFLAGS+= ${WERROR}
CFLAGS+= -D_KERNEL
CFLAGS+= -DKLD_MODULE
# Don't use any standard or source-relative include directories.
# Since -nostdinc will annull any previous -I paths, we repeat all
# such paths after -nostdinc. It doesn't seem to be possible to
# add to the front of `make' variable.
_ICFLAGS:= ${CFLAGS:M-I*}
.if ${CC} == "icc"
NOSTDINC= -X
.else
NOSTDINC= -nostdinc
.endif
CFLAGS+= ${NOSTDINC} -I- ${INCLMAGIC} ${_ICFLAGS}
.if defined(KERNBUILDDIR)
CFLAGS+= -include ${KERNBUILDDIR}/opt_global.h
.endif
# Add -I paths for system headers. Individual module makefiles don't
# need any -I paths for this. Similar defaults for .PATH can't be
# set because there are no standard paths for non-headers.
CFLAGS+= -I. -I@
# Add -I path for altq headers as they are included via net/if_var.h
# for example.
CFLAGS+= -I@/contrib/altq
# Add a -I path to standard headers like <stddef.h>. Use a relative
# path to src/include if possible. If the @ symlink hasn't been built
# yet, then we can't tell if the relative path exists. Add both the
# potential relative path and an absolute path in that case.
.if exists(@)
.if exists(@/../include)
CFLAGS+= -I@/../include
.else
CFLAGS+= -I${DESTDIR}/usr/include
.endif
.else # !@
CFLAGS+= -I@/../include -I${DESTDIR}/usr/include
.endif # @
.if ${CC} != "icc"
CFLAGS+= -finline-limit=${INLINE_LIMIT}
.endif
# Disallow common variables, and if we end up with commons from
# somewhere unexpected, allocate storage for them in the module itself.
.if ${CC} != "icc"
CFLAGS+= -fno-common
.endif
LDFLAGS+= -d -warn-common
CFLAGS+= ${DEBUG_FLAGS}
.if ${MACHINE_ARCH} == amd64
CFLAGS+= -fno-omit-frame-pointer
.endif
.if ${MACHINE_ARCH} == "powerpc"
CFLAGS+= -mlongcall -fno-omit-frame-pointer
.endif
OBJS+= ${SRCS:N*.h:R:S/$/.o/g}
.if !defined(PROG)
PROG= ${KMOD}.ko
.endif
.if !defined(DEBUG_FLAGS)
FULLPROG= ${PROG}
.else
FULLPROG= ${PROG}.debug
${PROG}: ${FULLPROG}
${OBJCOPY} --strip-debug ${FULLPROG} ${PROG}
.endif
.if ${MACHINE_ARCH} != amd64
${FULLPROG}: ${KMOD}.kld
${LD} -Bshareable ${LDFLAGS} -o ${.TARGET} ${KMOD}.kld
.if !defined(DEBUG_FLAGS)
${OBJCOPY} --strip-debug ${.TARGET}
.endif
.endif
EXPORT_SYMS?= NO
.if ${EXPORT_SYMS} != YES
CLEANFILES+= export_syms
.endif
.if ${MACHINE_ARCH} != amd64
${KMOD}.kld: ${OBJS}
.else
${FULLPROG}: ${OBJS}
.endif
${LD} ${LDFLAGS} -r -d -o ${.TARGET} ${OBJS}
.if defined(EXPORT_SYMS)
.if ${EXPORT_SYMS} != YES
.if ${EXPORT_SYMS} == NO
touch export_syms
.elif !exists(${.CURDIR}/${EXPORT_SYMS})
echo ${EXPORT_SYMS} > export_syms
.else
grep -v '^#' < ${EXPORT_SYMS} > export_syms
.endif
awk -f ${SYSDIR}/conf/kmod_syms.awk ${.TARGET} \
export_syms | xargs -J% ${OBJCOPY} % ${.TARGET}
.endif
.endif
.if !defined(DEBUG_FLAGS) && ${MACHINE_ARCH} == amd64
${OBJCOPY} --strip-debug ${.TARGET}
.endif
_ILINKS=@ machine
all: objwarn ${PROG}
beforedepend: ${_ILINKS}
# Ensure that the links exist without depending on it when it exists which
# causes all the modules to be rebuilt when the directory pointed to changes.
.for _link in ${_ILINKS}
.if !exists(${.OBJDIR}/${_link})
${OBJS}: ${_link}
.endif
.endfor
# Search for kernel source tree in standard places.
.for _dir in ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys
.if !defined(SYSDIR) && exists(${_dir}/kern/)
SYSDIR= ${_dir}
.endif
.endfor
.if !defined(SYSDIR) || !exists(${SYSDIR}/kern/)
.error "can't find kernel source tree"
.endif
${_ILINKS}:
@case ${.TARGET} in \
machine) \
path=${SYSDIR}/${MACHINE_ARCH}/include ;; \
@) \
path=${SYSDIR} ;; \
esac ; \
path=`(cd $$path && /bin/pwd)` ; \
${ECHO} ${.TARGET} "->" $$path ; \
ln -s $$path ${.TARGET}
CLEANFILES+= ${PROG} ${KMOD}.kld ${OBJS} ${_ILINKS}
.if defined(DEBUG_FLAGS)
CLEANFILES+= ${FULLPROG}
.endif
.if !target(install)
_INSTALLFLAGS:= ${INSTALLFLAGS}
.for ie in ${INSTALLFLAGS_EDIT}
_INSTALLFLAGS:= ${_INSTALLFLAGS${ie}}
.endfor
.if !target(install.debug) && defined(DEBUG_FLAGS)
install.debug:
cd ${.CURDIR}; ${MAKE} -DINSTALL_DEBUG install
.endif
.if !target(realinstall)
realinstall: _kmodinstall
.ORDER: beforeinstall _kmodinstall
_kmodinstall:
.if defined(DEBUG_FLAGS) && defined(INSTALL_DEBUG)
${INSTALL} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${FULLPROG} ${DESTDIR}${KMODDIR}
.else
${INSTALL} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}
.include <bsd.links.mk>
.if !defined(NO_XREF)
afterinstall: _kldxref
.ORDER: realinstall _kldxref
.ORDER: _installlinks _kldxref
_kldxref:
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
.endif
.endif
.endif !target(realinstall)
.endif !target(install)
.if !target(load)
load: ${PROG}
${KMODLOAD} -v ${.OBJDIR}/${PROG}
.endif
.if !target(unload)
unload:
${KMODUNLOAD} -v ${PROG}
.endif
.if defined(KERNBUILDDIR)
.PATH: ${KERNBUILDDIR}
CFLAGS+= -I${KERNBUILDDIR}
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
ln -s ${KERNBUILDDIR}/${_src} ${.TARGET}
.endif
.endfor
.else
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
touch ${.TARGET}
.endif
.endfor
.endif
MFILES?= dev/acpica/acpi_if.m dev/eisa/eisa_if.m dev/iicbus/iicbb_if.m \
dev/iicbus/iicbus_if.m dev/mii/miibus_if.m dev/ofw/ofw_bus_if.m \
dev/pccard/card_if.m dev/pccard/power_if.m dev/pci/pci_if.m \
dev/pci/pcib_if.m dev/ppbus/ppbus_if.m dev/smbus/smbus_if.m \
dev/sound/pcm/ac97_if.m dev/sound/pcm/channel_if.m \
dev/sound/pcm/feeder_if.m dev/sound/pcm/mixer_if.m dev/uart/uart_if.m \
dev/usb/usb_if.m isa/isa_if.m \
kern/bus_if.m kern/cpufreq_if.m kern/device_if.m \
libkern/iconv_converter_if.m opencrypto/crypto_if.m \
pc98/pc98/canbus_if.m pci/agp_if.m
.for _srcsrc in ${MFILES}
.for _ext in c h
.for _src in ${SRCS:M${_srcsrc:T:R}.${_ext}}
CLEANFILES+= ${_src}
.if !target(${_src})
.if !exists(@)
${_src}: @
.else
${_src}: @/tools/makeobjops.awk @/${_srcsrc}
.endif
${AWK} -f @/tools/makeobjops.awk @/${_srcsrc} -${_ext}
.endif
.endfor # _src
.endfor # _ext
.endfor # _srcsrc
.if ${SRCS:Mvnode_if.c} != ""
CLEANFILES+= vnode_if.c
.if !exists(@)
vnode_if.c: @
.else
vnode_if.c: @/tools/vnode_if.awk @/kern/vnode_if.src
.endif
${AWK} -f @/tools/vnode_if.awk @/kern/vnode_if.src -c
.endif
.if ${SRCS:Mvnode_if.h} != ""
CLEANFILES+= vnode_if.h vnode_if_newproto.h vnode_if_typedef.h
.if !exists(@)
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: @
.else
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: @/tools/vnode_if.awk \
@/kern/vnode_if.src
.endif
vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h
${AWK} -f @/tools/vnode_if.awk @/kern/vnode_if.src -h
vnode_if_newproto.h:
${AWK} -f @/tools/vnode_if.awk @/kern/vnode_if.src -p
vnode_if_typedef.h:
${AWK} -f @/tools/vnode_if.awk @/kern/vnode_if.src -q
.endif
.for _i in mii pccard
.if ${SRCS:M${_i}devs.h} != ""
CLEANFILES+= ${_i}devs.h
.if !exists(@)
${_i}devs.h: @
.else
${_i}devs.h: @/tools/${_i}devs2h.awk @/dev/${_i}/${_i}devs
.endif
${AWK} -f @/tools/${_i}devs2h.awk @/dev/${_i}/${_i}devs
.endif
.endfor # _i
.if ${SRCS:Musbdevs.h} != ""
CLEANFILES+= usbdevs.h
.if !exists(@)
usbdevs.h: @
.else
usbdevs.h: @/tools/usbdevs2h.awk @/dev/usb/usbdevs
.endif
${AWK} -f @/tools/usbdevs2h.awk @/dev/usb/usbdevs -h
.endif
.if ${SRCS:Musbdevs_data.h} != ""
CLEANFILES+= usbdevs_data.h
.if !exists(@)
usbdevs_data.h: @
.else
usbdevs_data.h: @/tools/usbdevs2h.awk @/dev/usb/usbdevs
.endif
${AWK} -f @/tools/usbdevs2h.awk @/dev/usb/usbdevs -d
.endif
.if ${SRCS:Macpi_quirks.h} != ""
CLEANFILES+= acpi_quirks.h
.if !exists(@)
acpi_quirks.h: @
.else
acpi_quirks.h: @/tools/acpi_quirks2h.awk @/dev/acpica/acpi_quirks
.endif
${AWK} -f @/tools/acpi_quirks2h.awk @/dev/acpica/acpi_quirks
.endif
lint: ${SRCS}
${LINT} ${LINTKERNFLAGS} ${CFLAGS:M-[DILU]*} ${.ALLSRC:M*.c}
.include <bsd.dep.mk>
.if !exists(${.OBJDIR}/${DEPENDFILE})
${OBJS}: ${SRCS:M*.h}
.endif
.include <bsd.obj.mk>
.include "kern.mk"