mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
344c81a166
PR: 168016 Submitted by: Nobuyuki Koganemaru Approved by: gjb MFC after: 3 days
116 lines
3.1 KiB
Groff
116 lines
3.1 KiB
Groff
.\" $FreeBSD$
|
|
.Dd December 15, 2011
|
|
.Dt ETHERSWITCHCFG 8
|
|
.Os
|
|
.Sh NAME
|
|
.Nm etherswitchcfg
|
|
.Nd configure a built-in Ethernet switch
|
|
.Sh SYNOPSIS
|
|
.Nm
|
|
.Op Fl "f control file"
|
|
.Ar info
|
|
.Nm
|
|
.Op Fl "f control file"
|
|
.Ar phy
|
|
.Ar phy.register[=value]
|
|
.Nm
|
|
.Op Fl "f control file"
|
|
.Ar port%d
|
|
.Ar command parameter
|
|
.Nm
|
|
.Op Fl "f control file"
|
|
.Ar reg
|
|
.Ar register[=value]
|
|
.Nm
|
|
.Op Fl "f control file"
|
|
.Ar vlangroup%d
|
|
.Ar command parameter
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
utility is used to configure an Ethernet switch built into the system.
|
|
.Nm
|
|
accepts a number of options:
|
|
.Bl -tag -width ".Fl f" -compact
|
|
.It Fl "f control file"
|
|
Specifies the
|
|
.Xr etherswitch 4
|
|
control file that represents the switch to be configured.
|
|
It defaults to
|
|
.Li /dev/etherswitch0 .
|
|
.It Fl m
|
|
When reporting port information, also list available media options for
|
|
that port.
|
|
.It Fl v
|
|
Produce more verbose output.
|
|
Without this flag, lines that represent inactive or empty configuration
|
|
options are omitted.
|
|
.El
|
|
.Ss phy
|
|
The phy command provides access to the registers of the PHYs attached
|
|
to or integrated into the switch controller.
|
|
PHY registers are specified as phy.register,
|
|
where
|
|
.Ar phy
|
|
is usually the port number, and
|
|
.Ar register
|
|
is the register number.
|
|
Both can be provided as decimal, octal or hexadecimal numbers in any of the formats
|
|
understood by
|
|
.Xr strtol 4 .
|
|
To set the register value, use the form instance.register=value.
|
|
.Ss port
|
|
The port command selects one of the ports of the switch.
|
|
It supports the following commands:
|
|
.Bl -tag -width ".Ar vlangroup number" -compact
|
|
.It Ar vlangroup number
|
|
Sets the VLAN group number that is used to process incoming frames that are not tagged.
|
|
.It Ar media mediaspec
|
|
Specifies the physical media configuration to be configured for a port.
|
|
.It Ar mediaopt mediaoption
|
|
Specifies a list of media options for a port. See
|
|
.Xr ifconfig 8
|
|
for details on
|
|
.Ar media
|
|
and
|
|
.Ar mediaopt .
|
|
.El
|
|
.Ss reg
|
|
The reg command provides access to the registers of the switch controller.
|
|
.Ss vlangroup
|
|
The vlangroup command selects one of the VLAN groups for configuration.
|
|
It supports the following commands:
|
|
.Bl -tag -width ".Ar vlangroup" -compact
|
|
.It Ar vlan VID
|
|
Sets the VLAN ID (802.1q VID) for this VLAN group.
|
|
Frames transmitted on tagged member ports of this group will be tagged
|
|
with this VID.
|
|
Incoming frames carrying this tag will be forwarded according to the
|
|
configuration of this VLAN group.
|
|
.It Ar members port,...
|
|
Configures which ports are to be a member of this VLAN group.
|
|
The port numbers are given as a comma-separated list.
|
|
Each port can optionally be followed by
|
|
.Dq t
|
|
to indicate that frames on this port are tagged.
|
|
.El
|
|
.Sh FILES
|
|
.Bl -tag -width /dev/etherswitch? -compact
|
|
.It Pa /dev/etherswitch?
|
|
Control file for the ethernet switch driver.
|
|
.El
|
|
.Sh EXAMPLES
|
|
Configure VLAN group 1 with a VID of 2 and makes ports 0 and 5 members,
|
|
while excluding all other ports.
|
|
Port 5 will send and receive tagged frames, while port 0 will be untagged.
|
|
Incoming untagged frames on port 0 are assigned to vlangroup1.
|
|
.Dl # etherswitchcfg vlangroup1 vlan 2 members 0,5t port0 vlangroup 1
|
|
.Sh SEE ALSO
|
|
.Xr etherswitch 4
|
|
.Sh HISTORY
|
|
.Nm
|
|
first appeared in
|
|
.Fx 10.0 .
|
|
.Sh AUTHORS
|
|
.An Stefan Bethke
|