..
agp_ali.c
A driver for programming the AGP hardware. This is only very lightly
2000-06-09 16:04:30 +00:00
agp_amd.c
Release resources properly in detach.
2000-06-10 17:53:20 +00:00
agp_i810.c
Add support for Intel's i810 chipset with integrated graphics. An
2000-07-12 10:13:07 +00:00
agp_if.m
A driver for programming the AGP hardware. This is only very lightly
2000-06-09 16:04:30 +00:00
agp_intel.c
A driver for programming the AGP hardware. This is only very lightly
2000-06-09 16:04:30 +00:00
agp_sis.c
A driver for programming the AGP hardware. This is only very lightly
2000-06-09 16:04:30 +00:00
agp_via.c
A driver for programming the AGP hardware. This is only very lightly
2000-06-09 16:04:30 +00:00
agp.c
Add support for Intel's i810 chipset with integrated graphics. An
2000-07-12 10:13:07 +00:00
agppriv.h
Add support for Intel's i810 chipset with integrated graphics. An
2000-07-12 10:13:07 +00:00
agpreg.h
Add support for Intel's i810 chipset with integrated graphics. An
2000-07-12 10:13:07 +00:00
agpvar.h
A driver for programming the AGP hardware. This is only very lightly
2000-06-09 16:04:30 +00:00
alpm.c
Remove ~25 unneeded #include <sys/conf.h>
2000-04-19 14:58:28 +00:00
amd.c
Remove ~25 unneeded #include <sys/conf.h>
2000-04-19 14:58:28 +00:00
amd.h
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
cy_pci.c
Ahhrggg. Put the test for the compat shims AFTER the file that includes
2000-03-27 20:24:02 +00:00
cy_pcireg.h
dc21040reg.h
ide_pcireg.h
if_ar_p.c
Ahhrggg. Put the test for the compat shims AFTER the file that includes
2000-03-27 20:24:02 +00:00
if_dc.c
Add the PCI IDs for the Macronix 98727 and 98732 parts. These are
2000-07-17 19:27:41 +00:00
if_dcreg.h
Add the PCI IDs for the Macronix 98727 and 98732 parts. These are
2000-07-17 19:27:41 +00:00
if_de.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_devar.h
Use bus_space for all register accesses.
2000-05-13 18:47:24 +00:00
if_en_pci.c
Ahhrggg. Put the test for the compat shims AFTER the file that includes
2000-03-27 20:24:02 +00:00
if_fxp.c
Fix an alpha-only race which causes the transmit side of the chip to
2000-07-19 14:33:52 +00:00
if_fxpreg.h
Added support for the i82559ER (10/100Mbps NIC for embedded applications).
2000-06-18 10:26:09 +00:00
if_fxpvar.h
Added support for cards and on-motherboard NICs that use an SEEPROM
2000-03-28 04:41:42 +00:00
if_mn.c
Newbusify this driver at an expense of 40 extra lines of code.
2000-07-10 19:33:41 +00:00
if_rl.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_rlreg.h
if_sf.c
Close PR# 19904: remember to call sf_setmulti() when initializing the
2000-07-14 19:11:02 +00:00
if_sfreg.h
if_sis.c
sis_miibus_writereg() was checking for SIS_TYPE_900 and phy != 0 twice
2000-07-14 05:30:48 +00:00
if_sisreg.h
Add support for the National Semiconductor DP83815 fast ethernet
2000-07-06 06:02:04 +00:00
if_sk.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_skreg.h
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
if_sr_p.c
Ahhrggg. Put the test for the compat shims AFTER the file that includes
2000-03-27 20:24:02 +00:00
if_ste.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_stereg.h
if_ti.c
Tweak probe message so that 1000baseSX and 1000baseT cards are
2000-07-20 23:43:45 +00:00
if_tireg.h
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
2000-07-20 22:24:43 +00:00
if_tl.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_tlreg.h
if_tx.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_txvar.h
Added support for SMC9432BTX cards.
2000-06-21 19:19:49 +00:00
if_vr.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_vrreg.h
Close PR# 19617: add support for VIA VT6102 NICs to VIA Rhine driver.
2000-07-05 21:37:21 +00:00
if_wb.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_wbreg.h
if_wx.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_wxreg.h
Fix this driver to (finally) work with switches. Some more black
2000-06-16 06:28:31 +00:00
if_wxvar.h
Fix this driver to (finally) work with switches. Some more black
2000-06-16 06:28:31 +00:00
if_xl.c
Make all Ethernet drivers attach using ether_ifattach() and detach using
2000-07-13 22:54:34 +00:00
if_xlreg.h
intpm.c
Fix some leakage from inside #ifdef PCI_COMPAT (the FreeBSD 2.2 compat
2000-05-28 16:17:18 +00:00
intpmreg.h
isp_pci.c
Keep interrupts blocked for all of isp_pci_attach. Redo DMA routines
2000-07-18 06:40:22 +00:00
locate.pl
use warnings
2000-06-27 22:41:12 +00:00
meteor_reg.h
Add $FreeBSD$
2000-05-01 20:32:07 +00:00
meteor.c
Ahhrggg. Put the test for the compat shims AFTER the file that includes
2000-03-27 20:24:02 +00:00
ncr.c
ncr.c is no longer a COMPAT_OLDPCI device - remove the warning.
2000-05-28 10:45:06 +00:00
ncrreg.h
ohci_pci.c
Only display the 'Disable PNP-OS BIOS option' message on the i386 arch.
2000-05-11 20:17:28 +00:00
pccbb.c
pccbbreg.h
pccbbvar.h
pci_compat.c
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
pci_if.m
* Factor out the object system from new-bus so that it can be used by
2000-04-08 14:17:18 +00:00
pci.c
Nuke the useless chip driver. It gets in the way when you want to load
2000-06-09 16:00:29 +00:00
pcic_p.c
Make this compile without depending on the FreeBSD 2.2 compatability
2000-05-28 16:31:35 +00:00
pcic_p.h
Make this compile without depending on the FreeBSD 2.2 compatability
2000-05-28 16:31:35 +00:00
pcireg.h
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
pcisupport.c
Document the 0x12258086 PCI id.
2000-07-27 09:54:50 +00:00
pcivar.h
Nuke the useless chip driver. It gets in the way when you want to load
2000-06-09 16:00:29 +00:00
scsiiom.c
Add $FreeBSD$
2000-05-01 20:32:07 +00:00
simos.c
Separate the struct bio related stuff out of <sys/buf.h> into
2000-05-05 09:59:14 +00:00
simos.h
ti_fw2.h
Use a custom Tigon 2 firmware image, hopefully temporarily. This is
2000-07-26 23:55:34 +00:00
ti_fw.h
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
2000-07-20 22:24:43 +00:00
uhci_pci.c
Add 440MX chipset.
2000-05-24 02:24:38 +00:00
xmaciireg.h
Reoganize/update the SysKonnect driver:
2000-04-22 02:16:41 +00:00
xrpu.c
Do not depend on FreeBSD 2.2 compatability defines.
2000-05-28 16:18:58 +00:00