Bill Paul 20ea6dd580 In the device attach routine, don't depend on uaa->iface being ... populated. Apparently, if you use an ehci controller, it's not. Use usbd_device2interface_handle() to retrieve the interface handle. NOTE: uaa->iface is populated in the probe routine, so I suspect the fact that it's NULL in the attach routine is a bug in the ehci driver. Also, don't depend on the PHY addresses returned by the AXE_CMD_READ_PHYID command. The address is correct for my LinkSys NIC, but a user has reported that with a D-Link NIC, the PHYID command returns address 4 while the attached Broadcom PHY is in fact strapped for address 0. Instead, latch onto the first PHY address that returns valid data during a readreg operation.		2003-06-15 21:45:43 +00:00
..
devlist2h.awk
dsbr100io.h
ehci_pci.c	Enable bus mastering in the attach routine. This appears to fix the	2003-06-12 05:29:15 +00:00
ehci.c	add EHCI (USB 2.0) controller support.	2003-04-14 14:04:08 +00:00
ehcireg.h	add EHCI (USB 2.0) controller support.	2003-04-14 14:04:08 +00:00
ehcivar.h	add EHCI (USB 2.0) controller support.	2003-04-14 14:04:08 +00:00
FILES	add EHCI (USB 2.0) controller support.	2003-04-14 14:04:08 +00:00
hid.c
hid.h
if_aue.c	- Express hard dependencies on bus (pci, isa, pccard) and	2003-04-15 06:37:30 +00:00
if_auereg.h
if_axe.c	In the device attach routine, don't depend on uaa->iface being	2003-06-15 21:45:43 +00:00
if_axereg.h	In the device attach routine, don't depend on uaa->iface being	2003-06-15 21:45:43 +00:00
if_cue.c	Fix indentation.	2003-05-31 19:02:20 +00:00
if_cuereg.h
if_kue.c	- Express hard dependencies on bus (pci, isa, pccard) and	2003-04-15 06:37:30 +00:00
if_kuereg.h
if_rue.c	Add RealTek RTL8150 USB to fast Ethernet controller driver.	2003-05-03 10:16:56 +00:00
if_ruereg.h	Add RealTek RTL8150 USB to fast Ethernet controller driver.	2003-05-03 10:16:56 +00:00
kue_fw.h
Makefile.usbdevs
ohci_pci.c	Enable bus mastering in the attach routine. This appears to fix the	2003-06-12 05:29:15 +00:00
ohci.c
ohcireg.h
ohcivar.h
rio500_usb.h
ubsa.c
ucom.c
ucomvar.h
udbp.c
udbp.h
ufm.c
uftdi.c
uftdireg.h
ugen.c	Correct the fix in rev 1.70	2003-05-29 23:47:12 +00:00
ugraphire_rdesc.h
uhci_pci.c	Enable bus mastering in the attach routine. This appears to fix the	2003-06-12 05:29:15 +00:00
uhci.c
uhcireg.h
uhcivar.h
uhid.c	At least pretend to handle USB_GET_REPORT_ID.	2003-04-09 08:43:01 +00:00
uhub.c
ukbd.c	Deprecate machine/limits.h in favor of new sys/limits.h.	2003-04-29 13:36:06 +00:00
ulpt.c	If the device goes away during ulpt_reset(), make sure not to call	2003-06-15 11:55:50 +00:00
umass.c	Merge common XPT_CALC_GEOMETRY functions into a single convenience function.	2003-06-14 22:40:08 +00:00
umodem.c
ums.c
uplcom.c
urio.c
usb_ethersubr.c
usb_ethersubr.h
usb_if.m
usb_mem.h
usb_port.h	Don't define memcpy() to bcopy() and in particular not memset() to	2003-05-31 19:38:43 +00:00
usb_quirks.c	Add quirk for LOGITECH WMRPAD.	2003-04-10 08:25:09 +00:00
usb_quirks.h
usb_subr.c
usb.c	add EHCI (USB 2.0) controller support.	2003-04-14 14:04:08 +00:00
usb.h
usbcdc.h
usbdevs	Allow the EPSON USB scanner 1250 to be recognised as a uscanner device.	2003-06-13 11:20:26 +00:00
usbdevs_data.h	Regen.	2003-06-13 11:24:45 +00:00
usbdevs.h	Regen.	2003-06-13 11:24:45 +00:00
usbdi_util.c
usbdi_util.h
usbdi.c
usbdi.h
usbdivar.h
usbhid.h
uscanner.c	Allow the EPSON USB scanner 1250 to be recognised as a uscanner device.	2003-06-13 11:20:26 +00:00
uvisor.c	Add support for the CLIE 5.0 series of PDAs	2003-04-06 17:34:50 +00:00
uvscom.c