mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-30 12:04:07 +00:00
Code Issues Releases Activity
0791e0c0e7
freebsd/sys/dev/aic7xxx/aic7xxx.h
Eitan Adler 7a2b450ff8 Fxi a bunch of typos. 
PR:	misc/174625
Submitted by:	Jeremy Chadwick <jdc@koitsu.org>
2013-05-10 16:41:26 +00:00

1379 lines
44 KiB
C
Raw Blame History

/*-
* Core definitions and data structures shareable across OS platforms.
*
* Copyright (c) 1994-2001 Justin T. Gibbs.
* Copyright (c) 2000-2001 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#85 $
*
* $FreeBSD$
*/
#ifndef _AIC7XXX_H_
#define _AIC7XXX_H_
/* Register Definitions */
#include "aic7xxx_reg.h"
/************************* Forward Declarations *******************************/
struct ahc_platform_data;
struct scb_platform_data;
struct seeprom_descriptor;
/****************************** Useful Macros *********************************/
#ifndef MAX
#define MAX(a,b) (((a) > (b)) ? (a) : (b))
#endif
#ifndef MIN
#define MIN(a,b) (((a) < (b)) ? (a) : (b))
#endif
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array))
#define ALL_CHANNELS '\0'
#define ALL_TARGETS_MASK 0xFFFF
#define INITIATOR_WILDCARD (~0)
#define SCSIID_TARGET(ahc, scsiid) \
(((scsiid) & ((((ahc)->features & AHC_TWIN) != 0) ? TWIN_TID : TID)) \
>> TID_SHIFT)
#define SCSIID_OUR_ID(scsiid) \
((scsiid) & OID)
#define SCSIID_CHANNEL(ahc, scsiid) \
((((ahc)->features & AHC_TWIN) != 0) \
? ((((scsiid) & TWIN_CHNLB) != 0) ? 'B' : 'A') \
: 'A')
#define SCB_IS_SCSIBUS_B(ahc, scb) \
(SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) == 'B')
#define SCB_GET_OUR_ID(scb) \
SCSIID_OUR_ID((scb)->hscb->scsiid)
#define SCB_GET_TARGET(ahc, scb) \
SCSIID_TARGET((ahc), (scb)->hscb->scsiid)
#define SCB_GET_CHANNEL(ahc, scb) \
SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid)
#define SCB_GET_LUN(scb) \
((scb)->hscb->lun & LID)
#define SCB_GET_TARGET_OFFSET(ahc, scb) \
(SCB_GET_TARGET(ahc, scb) + (SCB_IS_SCSIBUS_B(ahc, scb) ? 8 : 0))
#define SCB_GET_TARGET_MASK(ahc, scb) \
(0x01 << (SCB_GET_TARGET_OFFSET(ahc, scb)))
#ifdef AHC_DEBUG
#define SCB_IS_SILENT(scb) \
((ahc_debug & AHC_SHOW_MASKED_ERRORS) == 0 \
&& (((scb)->flags & SCB_SILENT) != 0))
#else
#define SCB_IS_SILENT(scb) \
(((scb)->flags & SCB_SILENT) != 0)
#endif
#define TCL_TARGET_OFFSET(tcl) \
((((tcl) >> 4) & TID) >> 4)
#define TCL_LUN(tcl) \
(tcl & (AHC_NUM_LUNS - 1))
#define BUILD_TCL(scsiid, lun) \
((lun) | (((scsiid) & TID) << 4))
#ifndef AHC_TARGET_MODE
#undef AHC_TMODE_ENABLE
#define AHC_TMODE_ENABLE 0
#endif
/**************************** Driver Constants ********************************/
/*
* The maximum number of supported targets.
*/
#define AHC_NUM_TARGETS 16
/*
* The maximum number of supported luns.
* The identify message only supports 64 luns in SPI3.
* You can have 2^64 luns when information unit transfers are enabled,
* but it is doubtful this driver will ever support IUTs.
*/
#define AHC_NUM_LUNS 64
/*
* The maximum transfer per S/G segment.
*/
#define AHC_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */
/*
* The maximum amount of SCB storage in hardware on a controller.
* This value represents an upper bound. Controllers vary in the number
* they actually support.
*/
#define AHC_SCB_MAX 255
/*
* The maximum number of concurrent transactions supported per driver instance.
* Sequencer Control Blocks (SCBs) store per-transaction information. Although
* the space for SCBs on the host adapter varies by model, the driver will
* page the SCBs between host and controller memory as needed. We are limited
* to 253 because:
* 1) The 8bit nature of the RISC engine holds us to an 8bit value.
* 2) We reserve one value, 255, to represent the invalid element.
* 3) Our input queue scheme requires one SCB to always be reserved
* in advance of queuing any SCBs. This takes us down to 254.
* 4) To handle our output queue correctly on machines that only
* support 32bit stores, we must clear the array 4 bytes at a
* time. To avoid colliding with a DMA write from the sequencer,
* we must be sure that 4 slots are empty when we write to clear
* the queue. This reduces us to 253 SCBs: 1 that just completed
* and the known three additional empty slots in the queue that
* precede it.
*/
#define AHC_MAX_QUEUE 253
/*
* The maximum amount of SCB storage we allocate in host memory. This
* number should reflect the 1 additional SCB we require to handle our
* qinfifo mechanism.
*/
#define AHC_SCB_MAX_ALLOC (AHC_MAX_QUEUE+1)
/*
* Ring Buffer of incoming target commands.
* We allocate 256 to simplify the logic in the sequencer
* by using the natural wrap point of an 8bit counter.
*/
#define AHC_TMODE_CMDS 256
/* Reset line assertion time in us */
#define AHC_BUSRESET_DELAY 25
/* Phase change constants used in target mode. */
#define AHC_BUSSETTLE_DELAY 400
#define AHC_DATARELEASE_DELAY 400
/******************* Chip Characteristics/Operating Settings *****************/
/*
* Chip Type
* The chip order is from least sophisticated to most sophisticated.
*/
typedef enum {
AHC_NONE = 0x0000,
AHC_CHIPID_MASK = 0x00FF,
AHC_AIC7770 = 0x0001,
AHC_AIC7850 = 0x0002,
AHC_AIC7855 = 0x0003,
AHC_AIC7859 = 0x0004,
AHC_AIC7860 = 0x0005,
AHC_AIC7870 = 0x0006,
AHC_AIC7880 = 0x0007,
AHC_AIC7895 = 0x0008,
AHC_AIC7895C = 0x0009,
AHC_AIC7890 = 0x000a,
AHC_AIC7896 = 0x000b,
AHC_AIC7892 = 0x000c,
AHC_AIC7899 = 0x000d,
AHC_VL = 0x0100, /* Bus type VL */
AHC_EISA = 0x0200, /* Bus type EISA */
AHC_PCI = 0x0400, /* Bus type PCI */
AHC_BUS_MASK = 0x0F00
} ahc_chip;
/*
* Features available in each chip type.
*/
typedef enum {
AHC_FENONE = 0x00000,
AHC_ULTRA = 0x00001, /* Supports 20MHz Transfers */
AHC_ULTRA2 = 0x00002, /* Supports 40MHz Transfers */
AHC_WIDE = 0x00004, /* Wide Channel */
AHC_TWIN = 0x00008, /* Twin Channel */
AHC_MORE_SRAM = 0x00010, /* 80 bytes instead of 64 */
AHC_CMD_CHAN = 0x00020, /* Has a Command DMA Channel */
AHC_QUEUE_REGS = 0x00040, /* Has Queue management registers */
AHC_SG_PRELOAD = 0x00080, /* Can perform auto-SG preload */
AHC_SPIOCAP = 0x00100, /* Has a Serial Port I/O Cap Register */
AHC_MULTI_TID = 0x00200, /* Has bitmask of TIDs for select-in */
AHC_HS_MAILBOX = 0x00400, /* Has HS_MAILBOX register */
AHC_DT = 0x00800, /* Double Transition transfers */
AHC_NEW_TERMCTL = 0x01000, /* Newer termination scheme */
AHC_MULTI_FUNC = 0x02000, /* Multi-Function Twin Channel Device */
AHC_LARGE_SCBS = 0x04000, /* 64byte SCBs */
AHC_AUTORATE = 0x08000, /* Automatic update of SCSIRATE/OFFSET*/
AHC_AUTOPAUSE = 0x10000, /* Automatic pause on register access */
AHC_TARGETMODE = 0x20000, /* Has tested target mode support */
AHC_MULTIROLE = 0x40000, /* Space for two roles at a time */
AHC_REMOVABLE = 0x80000, /* Hot-Swap supported */
AHC_AIC7770_FE = AHC_FENONE,
/*
* The real 7850 does not support Ultra modes, but there are
* several cards that use the generic 7850 PCI ID even though
* they are using an Ultra capable chip (7859/7860). We start
* out with the AHC_ULTRA feature set and then check the DEVSTATUS
* register to determine if the capability is really present.
*/
AHC_AIC7850_FE = AHC_SPIOCAP|AHC_AUTOPAUSE|AHC_TARGETMODE|AHC_ULTRA,
AHC_AIC7860_FE = AHC_AIC7850_FE,
AHC_AIC7870_FE = AHC_TARGETMODE|AHC_AUTOPAUSE,
AHC_AIC7880_FE = AHC_AIC7870_FE|AHC_ULTRA,
/*
* Although we have space for both the initiator and
* target roles on ULTRA2 chips, we currently disable
* the initiator role to allow multi-scsi-id target mode
* configurations. We can only respond on the same SCSI
* ID as our initiator role if we allow initiator operation.
* At some point, we should add a configuration knob to
* allow both roles to be loaded.
*/
AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2
|AHC_QUEUE_REGS|AHC_SG_PRELOAD|AHC_MULTI_TID
|AHC_HS_MAILBOX|AHC_NEW_TERMCTL|AHC_LARGE_SCBS
|AHC_TARGETMODE,
AHC_AIC7892_FE = AHC_AIC7890_FE|AHC_DT|AHC_AUTORATE|AHC_AUTOPAUSE,
AHC_AIC7895_FE = AHC_AIC7880_FE|AHC_MORE_SRAM|AHC_AUTOPAUSE
|AHC_CMD_CHAN|AHC_MULTI_FUNC|AHC_LARGE_SCBS,
AHC_AIC7895C_FE = AHC_AIC7895_FE|AHC_MULTI_TID,
AHC_AIC7896_FE = AHC_AIC7890_FE|AHC_MULTI_FUNC,
AHC_AIC7899_FE = AHC_AIC7892_FE|AHC_MULTI_FUNC
} ahc_feature;
/*
* Bugs in the silicon that we work around in software.
*/
typedef enum {
AHC_BUGNONE = 0x00,
/*
* On all chips prior to the U2 product line,
* the WIDEODD S/G segment feature does not
* work during scsi->HostBus transfers.
*/
AHC_TMODE_WIDEODD_BUG = 0x01,
/*
* On the aic7890/91 Rev 0 chips, the autoflush
* feature does not work. A manual flush of
* the DMA FIFO is required.
*/
AHC_AUTOFLUSH_BUG = 0x02,
/*
* On many chips, cacheline streaming does not work.
*/
AHC_CACHETHEN_BUG = 0x04,
/*
* On the aic7896/97 chips, cacheline
* streaming must be enabled.
*/
AHC_CACHETHEN_DIS_BUG = 0x08,
/*
* PCI 2.1 Retry failure on non-empty data fifo.
*/
AHC_PCI_2_1_RETRY_BUG = 0x10,
/*
* Controller does not handle cacheline residuals
* properly on S/G segments if PCI MWI instructions
* are allowed.
*/
AHC_PCI_MWI_BUG = 0x20,
/*
* An SCB upload using the SCB channel's
* auto array entry copy feature may
* corrupt data. This appears to only
* occur on 66MHz systems.
*/
AHC_SCBCHAN_UPLOAD_BUG = 0x40
} ahc_bug;
/*
* Configuration specific settings.
* The driver determines these settings by probing the
* chip/controller's configuration.
*/
typedef enum {
AHC_FNONE = 0x000,
AHC_PRIMARY_CHANNEL = 0x003, /*
* The channel that should
* be probed first.
*/
AHC_USEDEFAULTS = 0x004, /*
* For cards without an seeprom
* or a BIOS to initialize the chip's
* SRAM, we use the default target
* settings.
*/
AHC_SEQUENCER_DEBUG = 0x008,
AHC_SHARED_SRAM = 0x010,
AHC_LARGE_SEEPROM = 0x020, /* Uses C56_66 not C46 */
AHC_RESET_BUS_A = 0x040,
AHC_RESET_BUS_B = 0x080,
AHC_EXTENDED_TRANS_A = 0x100,
AHC_EXTENDED_TRANS_B = 0x200,
AHC_TERM_ENB_A = 0x400,
AHC_TERM_ENB_B = 0x800,
AHC_INITIATORROLE = 0x1000, /*
* Allow initiator operations on
* this controller.
*/
AHC_TARGETROLE = 0x2000, /*
* Allow target operations on this
* controller.
*/
AHC_NEWEEPROM_FMT = 0x4000,
AHC_RESOURCE_SHORTAGE = 0x8000,
AHC_TQINFIFO_BLOCKED = 0x10000, /* Blocked waiting for ATIOs */
AHC_INT50_SPEEDFLEX = 0x20000, /*
* Internal 50pin connector
* sits behind an aic3860
*/
AHC_SCB_BTT = 0x40000, /*
* The busy targets table is
* stored in SCB space rather
* than SRAM.
*/
AHC_BIOS_ENABLED = 0x80000,
AHC_ALL_INTERRUPTS = 0x100000,
AHC_PAGESCBS = 0x400000, /* Enable SCB paging */
AHC_EDGE_INTERRUPT = 0x800000, /* Device uses edge triggered ints */
AHC_39BIT_ADDRESSING = 0x1000000, /* Use 39 bit addressing scheme. */
AHC_LSCBS_ENABLED = 0x2000000, /* 64Byte SCBs enabled */
AHC_SCB_CONFIG_USED = 0x4000000, /* No SEEPROM but SCB2 had info. */
AHC_NO_BIOS_INIT = 0x8000000, /* No BIOS left over settings. */
AHC_DISABLE_PCI_PERR = 0x10000000,
AHC_HAS_TERM_LOGIC = 0x20000000,
AHC_SHUTDOWN_RECOVERY = 0x40000000 /* Terminate recovery thread. */
} ahc_flag;
/************************* Hardware SCB Definition ***************************/
/*
* The driver keeps up to MAX_SCB scb structures per card in memory. The SCB
* consists of a "hardware SCB" mirroring the fields available on the card
* and additional information the kernel stores for each transaction.
*
* To minimize space utilization, a portion of the hardware scb stores
* different data during different portions of a SCSI transaction.
* As initialized by the host driver for the initiator role, this area
* contains the SCSI cdb (or a pointer to the cdb) to be executed. After
* the cdb has been presented to the target, this area serves to store
* residual transfer information and the SCSI status byte.
* For the target role, the contents of this area do not change, but
* still serve a different purpose than for the initiator role. See
* struct target_data for details.
*/
/*
* Status information embedded in the shared poriton of
* an SCB after passing the cdb to the target. The kernel
* driver will only read this data for transactions that
* complete abnormally (non-zero status byte).
*/
struct status_pkt {
uint32_t residual_datacnt; /* Residual in the current S/G seg */
uint32_t residual_sg_ptr; /* The next S/G for this transfer */
uint8_t scsi_status; /* Standard SCSI status byte */
};
/*
* Target mode version of the shared data SCB segment.
*/
struct target_data {
uint32_t residual_datacnt; /* Residual in the current S/G seg */
uint32_t residual_sg_ptr; /* The next S/G for this transfer */
uint8_t scsi_status; /* SCSI status to give to initiator */
uint8_t target_phases; /* Bitmap of phases to execute */
uint8_t data_phase; /* Data-In or Data-Out */
uint8_t initiator_tag; /* Initiator's transaction tag */
};
#define MAX_CDB_LEN 16
struct hardware_scb {
/*0*/ union {
/*
* If the cdb is 12 bytes or less, we embed it directly
* in the SCB. For longer cdbs, we embed the address
* of the cdb payload as seen by the chip and a DMA
* is used to pull it in.
*/
uint8_t cdb[12];
uint32_t cdb_ptr;
struct status_pkt status;
struct target_data tdata;
} shared_data;
/*
* A word about residuals.
* The scb is presented to the sequencer with the dataptr and datacnt
* fields initialized to the contents of the first S/G element to
* transfer. The sgptr field is initialized to the bus address for
* the S/G element that follows the first in the in core S/G array
* or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid
* S/G entry for this transfer (single S/G element transfer with the
* first elements address and length preloaded in the dataptr/datacnt
* fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL.
* The SG_FULL_RESID flag ensures that the residual will be correctly
* noted even if no data transfers occur. Once the data phase is entered,
* the residual sgptr and datacnt are loaded from the sgptr and the
* datacnt fields. After each S/G element's dataptr and length are
* loaded into the hardware, the residual sgptr is advanced. After
* each S/G element is expired, its datacnt field is checked to see
* if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
* residual sg ptr and the transfer is considered complete. If the
* sequencer determines that there is a residual in the tranfer, it
* will set the SG_RESID_VALID flag in sgptr and dma the scb back into
* host memory. To sumarize:
*
* Sequencer:
* o A residual has occurred if SG_FULL_RESID is set in sgptr,
* or residual_sgptr does not have SG_LIST_NULL set.
*
* o We are transfering the last segment if residual_datacnt has
* the SG_LAST_SEG flag set.
*
* Host:
* o A residual has occurred if a completed scb has the
* SG_RESID_VALID flag set.
*
* o residual_sgptr and sgptr refer to the "next" sg entry
* and so may point beyond the last valid sg entry for the
* transfer.
*/
/*12*/ uint32_t dataptr;
/*16*/ uint32_t datacnt; /*
* Byte 3 (numbered from 0) of
* the datacnt is really the
* 4th byte in that data address.
*/
/*20*/ uint32_t sgptr;
#define SG_PTR_MASK 0xFFFFFFF8
/*24*/ uint8_t control; /* See SCB_CONTROL in aic7xxx.reg for details */
/*25*/ uint8_t scsiid; /* what to load in the SCSIID register */
/*26*/ uint8_t lun;
/*27*/ uint8_t tag; /*
* Index into our kernel SCB array.
* Also used as the tag for tagged I/O
*/
/*28*/ uint8_t cdb_len;
/*29*/ uint8_t scsirate; /* Value for SCSIRATE register */
/*30*/ uint8_t scsioffset; /* Value for SCSIOFFSET register */
/*31*/ uint8_t next; /*
* Used for threading SCBs in the
* "Waiting for Selection" and
* "Disconnected SCB" lists down
* in the sequencer.
*/
/*32*/ uint8_t cdb32[32]; /*
* CDB storage for cdbs of size
* 13->32. We store them here
* because hardware scbs are
* allocated from DMA safe
* memory so we are guaranteed
* the controller can access
* this data.
*/
};
/************************ Kernel SCB Definitions ******************************/
/*
* Some fields of the SCB are OS dependent. Here we collect the
* definitions for elements that all OS platforms need to include
* in there SCB definition.
*/
/*
* Definition of a scatter/gather element as transfered to the controller.
* The aic7xxx chips only support a 24bit length. We use the top byte of
* the length to store additional address bits and a flag to indicate
* that a given segment terminates the transfer. This gives us an
* addressable range of 512GB on machines with 64bit PCI or with chips
* that can support dual address cycles on 32bit PCI busses.
*/
struct ahc_dma_seg {
uint32_t addr;
uint32_t len;
#define AHC_DMA_LAST_SEG 0x80000000
#define AHC_SG_HIGH_ADDR_MASK 0x7F000000
#define AHC_SG_LEN_MASK 0x00FFFFFF
};
struct sg_map_node {
bus_dmamap_t sg_dmamap;
bus_addr_t sg_physaddr;
struct ahc_dma_seg* sg_vaddr;
SLIST_ENTRY(sg_map_node) links;
};
/*
* The current state of this SCB.
*/
typedef enum {
SCB_FLAG_NONE = 0x0000,
SCB_OTHERTCL_TIMEOUT = 0x0002,/*
* Another device was active
* during the first timeout for
* this SCB so we gave ourselves
* an additional timeout period
* in case it was hogging the
* bus.
*/
SCB_DEVICE_RESET = 0x0004,
SCB_SENSE = 0x0008,
SCB_CDB32_PTR = 0x0010,
SCB_RECOVERY_SCB = 0x0020,
SCB_AUTO_NEGOTIATE = 0x0040,/* Negotiate to achieve goal. */
SCB_NEGOTIATE = 0x0080,/* Negotiation forced for command. */
SCB_ABORT = 0x0100,
SCB_UNTAGGEDQ = 0x0200,
SCB_ACTIVE = 0x0400,
SCB_TARGET_IMMEDIATE = 0x0800,
SCB_TRANSMISSION_ERROR = 0x1000,/*
* We detected a parity or CRC
* error that has effected the
* payload of the command. This
* flag is checked when normal
* status is returned to catch
* the case of a target not
* responding to our attempt
* to report the error.
*/
SCB_TARGET_SCB = 0x2000,
SCB_SILENT = 0x4000,/*
* Be quiet about transmission type
* errors. They are expected and we
* don't want to upset the user. This
* flag is typically used during DV.
*/
SCB_TIMEDOUT = 0x8000 /*
* SCB has timed out and is on the
* timedout list.
*/
} scb_flag;
struct scb {
struct hardware_scb *hscb;
union {
SLIST_ENTRY(scb) sle;
TAILQ_ENTRY(scb) tqe;
} links;
LIST_ENTRY(scb) pending_links;
LIST_ENTRY(scb) timedout_links;
aic_io_ctx_t io_ctx;
struct ahc_softc *ahc_softc;
scb_flag flags;
#ifndef __linux__
bus_dmamap_t dmamap;
#endif
struct scb_platform_data *platform_data;
struct sg_map_node *sg_map;
struct ahc_dma_seg *sg_list;
bus_addr_t sg_list_phys;
u_int sg_count;/* How full ahc_dma_seg is */
aic_timer_t io_timer;
};
struct scb_data {
SLIST_HEAD(, scb) free_scbs; /*
* Pool of SCBs ready to be assigned
* commands to execute.
*/
struct scb *scbindex[256]; /*
* Mapping from tag to SCB.
* As tag identifiers are an
* 8bit value, we provide space
* for all possible tag values.
* Any lookups to entries at or
* above AHC_SCB_MAX_ALLOC will
* always fail.
*/
struct hardware_scb *hscbs; /* Array of hardware SCBs */
struct scb *scbarray; /* Array of kernel SCBs */
struct scsi_sense_data *sense; /* Per SCB sense data */
u_int recovery_scbs; /* Transactions currently in recovery */
/*
* "Bus" addresses of our data structures.
*/
bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */
bus_dmamap_t hscb_dmamap;
bus_addr_t hscb_busaddr;
bus_dma_tag_t sense_dmat;
bus_dmamap_t sense_dmamap;
bus_addr_t sense_busaddr;
bus_dma_tag_t sg_dmat; /* dmat for our sg segments */
SLIST_HEAD(, sg_map_node) sg_maps;
uint8_t numscbs;
uint8_t maxhscbs; /* Number of SCBs on the card */
uint8_t init_level; /*
* How far we've initialized
* this structure.
*/
};
/************************ Target Mode Definitions *****************************/
/*
* Connection desciptor for select-in requests in target mode.
*/
struct target_cmd {
uint8_t scsiid; /* Our ID and the initiator's ID */
uint8_t identify; /* Identify message */
uint8_t bytes[22]; /*
* Bytes contains any additional message
* bytes terminated by 0xFF. The remainder
* is the cdb to execute.
*/
uint8_t cmd_valid; /*
* When a command is complete, the firmware
* will set cmd_valid to all bits set.
* After the host has seen the command,
* the bits are cleared. This allows us
* to just peek at host memory to determine
* if more work is complete. cmd_valid is on
* an 8 byte boundary to simplify setting
* it on aic7880 hardware which only has
* limited direct access to the DMA FIFO.
*/
uint8_t pad[7];
};
/*
* Number of events we can buffer up if we run out
* of immediate notify ccbs.
*/
#define AHC_TMODE_EVENT_BUFFER_SIZE 8
struct ahc_tmode_event {
uint8_t initiator_id;
uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */
#define EVENT_TYPE_BUS_RESET 0xFF
uint8_t event_arg;
};
/*
* Per enabled lun target mode state.
* As this state is directly influenced by the host OS'es target mode
* environment, we let the OS module define it. Forward declare the
* structure here so we can store arrays of them, etc. in OS neutral
* data structures.
*/
#ifdef AHC_TARGET_MODE
struct ahc_tmode_lstate {
struct cam_path *path;
struct ccb_hdr_slist accept_tios;
struct ccb_hdr_slist immed_notifies;
struct ahc_tmode_event event_buffer[AHC_TMODE_EVENT_BUFFER_SIZE];
uint8_t event_r_idx;
uint8_t event_w_idx;
};
#else
struct ahc_tmode_lstate;
#endif
/******************** Transfer Negotiation Datastructures *********************/
#define AHC_TRANS_CUR 0x01 /* Modify current neogtiation status */
#define AHC_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */
#define AHC_TRANS_GOAL 0x04 /* Modify negotiation goal */
#define AHC_TRANS_USER 0x08 /* Modify user negotiation settings */
#define AHC_WIDTH_UNKNOWN 0xFF
#define AHC_PERIOD_UNKNOWN 0xFF
#define AHC_OFFSET_UNKNOWN 0xFF
#define AHC_PPR_OPTS_UNKNOWN 0xFF
/*
* Transfer Negotiation Information.
*/
struct ahc_transinfo {
uint8_t protocol_version; /* SCSI Revision level */
uint8_t transport_version; /* SPI Revision level */
uint8_t width; /* Bus width */
uint8_t period; /* Sync rate factor */
uint8_t offset; /* Sync offset */
uint8_t ppr_options; /* Parallel Protocol Request options */
};
/*
* Per-initiator current, goal and user transfer negotiation information. */
struct ahc_initiator_tinfo {
uint8_t scsirate; /* Computed value for SCSIRATE reg */
struct ahc_transinfo curr;
struct ahc_transinfo goal;
struct ahc_transinfo user;
};
/*
* Per enabled target ID state.
* Pointers to lun target state as well as sync/wide negotiation information
* for each initiator<->target mapping. For the initiator role we pretend
* that we are the target and the targets are the initiators since the
* negotiation is the same regardless of role.
*/
struct ahc_tmode_tstate {
struct ahc_tmode_lstate* enabled_luns[AHC_NUM_LUNS];
struct ahc_initiator_tinfo transinfo[AHC_NUM_TARGETS];
/*
* Per initiator state bitmasks.
*/
uint16_t auto_negotiate;/* Auto Negotiation Required */
uint16_t ultraenb; /* Using ultra sync rate */
uint16_t discenable; /* Disconnection allowed */
uint16_t tagenable; /* Tagged Queuing allowed */
};
/*
* Data structure for our table of allowed synchronous transfer rates.
*/
struct ahc_syncrate {
u_int sxfr_u2; /* Value of the SXFR parameter for Ultra2+ Chips */
u_int sxfr; /* Value of the SXFR parameter for <= Ultra Chips */
#define ULTRA_SXFR 0x100 /* Rate Requires Ultra Mode set */
#define ST_SXFR 0x010 /* Rate Single Transition Only */
#define DT_SXFR 0x040 /* Rate Double Transition Only */
uint8_t period; /* Period to send to SCSI target */
char *rate;
};
/* Safe and valid period for async negotiations. */
#define AHC_ASYNC_XFER_PERIOD 0x45
#define AHC_ULTRA2_XFER_PERIOD 0x0a
/*
* Indexes into our table of synchronous transfer rates.
*/
#define AHC_SYNCRATE_DT 0
#define AHC_SYNCRATE_ULTRA2 1
#define AHC_SYNCRATE_ULTRA 3
#define AHC_SYNCRATE_FAST 6
#define AHC_SYNCRATE_MAX AHC_SYNCRATE_DT
#define AHC_SYNCRATE_MIN 13
/***************************** Lookup Tables **********************************/
/*
* Phase -> name and message out response
* to parity errors in each phase table.
*/
struct ahc_phase_table_entry {
uint8_t phase;
uint8_t mesg_out; /* Message response to parity errors */
char *phasemsg;
};
/************************** Serial EEPROM Format ******************************/
struct seeprom_config {
/*
* Per SCSI ID Configuration Flags
*/
uint16_t device_flags[16]; /* words 0-15 */
#define CFXFER 0x0007 /* synchronous transfer rate */
#define CFSYNCH 0x0008 /* enable synchronous transfer */
#define CFDISC 0x0010 /* enable disconnection */
#define CFWIDEB 0x0020 /* wide bus device */
#define CFSYNCHISULTRA 0x0040 /* CFSYNCH is an ultra offset (2940AU)*/
#define CFSYNCSINGLE 0x0080 /* Single-Transition signalling */
#define CFSTART 0x0100 /* send start unit SCSI command */
#define CFINCBIOS 0x0200 /* include in BIOS scan */
#define CFRNFOUND 0x0400 /* report even if not found */
#define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */
#define CFWBCACHEENB 0x4000 /* Enable W-Behind Cache on disks */
#define CFWBCACHENOP 0xc000 /* Don't touch W-Behind Cache */
/*
* BIOS Control Bits
*/
uint16_t bios_control; /* word 16 */
#define CFSUPREM 0x0001 /* support all removeable drives */
#define CFSUPREMB 0x0002 /* support removeable boot drives */
#define CFBIOSEN 0x0004 /* BIOS enabled */
#define CFBIOS_BUSSCAN 0x0008 /* Have the BIOS Scan the Bus */
#define CFSM2DRV 0x0010 /* support more than two drives */
#define CFSTPWLEVEL 0x0010 /* Termination level control */
#define CF284XEXTEND 0x0020 /* extended translation (284x cards) */
#define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */
#define CFTERM_MENU 0x0040 /* BIOS displays termination menu */
#define CFEXTEND 0x0080 /* extended translation enabled */
#define CFSCAMEN 0x0100 /* SCAM enable */
#define CFMSG_LEVEL 0x0600 /* BIOS Message Level */
#define CFMSG_VERBOSE 0x0000
#define CFMSG_SILENT 0x0200
#define CFMSG_DIAG 0x0400
#define CFBOOTCD 0x0800 /* Support Bootable CD-ROM */
/* UNUSED 0xff00 */
/*
* Host Adapter Control Bits
*/
uint16_t adapter_control; /* word 17 */
#define CFAUTOTERM 0x0001 /* Perform Auto termination */
#define CFULTRAEN 0x0002 /* Ultra SCSI speed enable */
#define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */
#define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */
#define CFSTERM 0x0004 /* SCSI low byte termination */
#define CFWSTERM 0x0008 /* SCSI high byte termination */
#define CFSPARITY 0x0010 /* SCSI parity */
#define CF284XSTERM 0x0020 /* SCSI low byte term (284x cards) */
#define CFMULTILUN 0x0020
#define CFRESETB 0x0040 /* reset SCSI bus at boot */
#define CFCLUSTERENB 0x0080 /* Cluster Enable */
#define CFBOOTCHAN 0x0300 /* probe this channel first */
#define CFBOOTCHANSHIFT 8
#define CFSEAUTOTERM 0x0400 /* Ultra2 Perform secondary Auto Term*/
#define CFSELOWTERM 0x0800 /* Ultra2 secondary low term */
#define CFSEHIGHTERM 0x1000 /* Ultra2 secondary high term */
#define CFENABLEDV 0x4000 /* Perform Domain Validation*/
/*
* Bus Release Time, Host Adapter ID
*/
uint16_t brtime_id; /* word 18 */
#define CFSCSIID 0x000f /* host adapter SCSI ID */
/* UNUSED 0x00f0 */
#define CFBRTIME 0xff00 /* bus release time */
/*
* Maximum targets
*/
uint16_t max_targets; /* word 19 */
#define CFMAXTARG 0x00ff /* maximum targets */
#define CFBOOTLUN 0x0f00 /* Lun to boot from */
#define CFBOOTID 0xf000 /* Target to boot from */
uint16_t res_1[10]; /* words 20-29 */
uint16_t signature; /* Signature == 0x250 */
#define CFSIGNATURE 0x250
#define CFSIGNATURE2 0x300
uint16_t checksum; /* word 31 */
};
/**************************** Message Buffer *********************************/
typedef enum {
MSG_TYPE_NONE = 0x00,
MSG_TYPE_INITIATOR_MSGOUT = 0x01,
MSG_TYPE_INITIATOR_MSGIN = 0x02,
MSG_TYPE_TARGET_MSGOUT = 0x03,
MSG_TYPE_TARGET_MSGIN = 0x04
} ahc_msg_type;
typedef enum {
MSGLOOP_IN_PROG,
MSGLOOP_MSGCOMPLETE,
MSGLOOP_TERMINATED
} msg_loop_stat;
/*********************** Software Configuration Structure *********************/
TAILQ_HEAD(scb_tailq, scb);
struct ahc_aic7770_softc {
/*
* Saved register state used for chip_init().
*/
uint8_t busspd;
uint8_t bustime;
};
struct ahc_pci_softc {
/*
* Saved register state used for chip_init().
*/
uint32_t devconfig;
uint16_t targcrccnt;
uint8_t command;
uint8_t csize_lattime;
uint8_t optionmode;
uint8_t crccontrol1;
uint8_t dscommand0;
uint8_t dspcistatus;
uint8_t scbbaddr;
uint8_t dff_thrsh;
};
union ahc_bus_softc {
struct ahc_aic7770_softc aic7770_softc;
struct ahc_pci_softc pci_softc;
};
typedef void (*ahc_bus_intr_t)(struct ahc_softc *);
typedef int (*ahc_bus_chip_init_t)(struct ahc_softc *);
typedef int (*ahc_bus_suspend_t)(struct ahc_softc *);
typedef int (*ahc_bus_resume_t)(struct ahc_softc *);
typedef void ahc_callback_t (void *);
#define AIC_SCB_DATA(softc) ((softc)->scb_data)
struct ahc_softc {
bus_space_tag_t tag;
bus_space_handle_t bsh;
#ifndef __linux__
bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */
#endif
struct scb_data *scb_data;
struct scb *next_queued_scb;
/*
* SCBs that have been sent to the controller
*/
LIST_HEAD(, scb) pending_scbs;
/*
* SCBs whose timeout routine has been called.
*/
LIST_HEAD(, scb) timedout_scbs;
/*
* Counting lock for deferring the release of additional
* untagged transactions from the untagged_queues. When
* the lock is decremented to 0, all queues in the
* untagged_queues array are run.
*/
u_int untagged_queue_lock;
/*
* Per-target queue of untagged-transactions. The
* transaction at the head of the queue is the
* currently pending untagged transaction for the
* target. The driver only allows a single untagged
* transaction per target.
*/
struct scb_tailq untagged_queues[AHC_NUM_TARGETS];
/*
* Bus attachment specific data.
*/
union ahc_bus_softc bus_softc;
/*
* Platform specific data.
*/
struct ahc_platform_data *platform_data;
/*
* Platform specific device information.
*/
aic_dev_softc_t dev_softc;
/*
* Bus specific device information.
*/
ahc_bus_intr_t bus_intr;
/*
* Bus specific initialization required
* after a chip reset.
*/
ahc_bus_chip_init_t bus_chip_init;
/*
* Bus specific suspend routine.
*/
ahc_bus_suspend_t bus_suspend;
/*
* Bus specific resume routine.
*/
ahc_bus_resume_t bus_resume;
/*
* Target mode related state kept on a per enabled lun basis.
* Targets that are not enabled will have null entries.
* As an initiator, we keep one target entry for our initiator
* ID to store our sync/wide transfer settings.
*/
struct ahc_tmode_tstate *enabled_targets[AHC_NUM_TARGETS];
/*
* The black hole device responsible for handling requests for
* disabled luns on enabled targets.
*/
struct ahc_tmode_lstate *black_hole;
/*
* Device instance currently on the bus awaiting a continue TIO
* for a command that was not given the disconnect priveledge.
*/
struct ahc_tmode_lstate *pending_device;
/*
* Card characteristics
*/
ahc_chip chip;
ahc_feature features;
ahc_bug bugs;
ahc_flag flags;
struct seeprom_config *seep_config;
/* Values to store in the SEQCTL register for pause and unpause */
uint8_t unpause;
uint8_t pause;
/* Command Queues */
uint8_t qoutfifonext;
uint8_t qinfifonext;
uint8_t *qoutfifo;
uint8_t *qinfifo;
/* Critical Section Data */
struct cs *critical_sections;
u_int num_critical_sections;
/* Links for chaining softcs */
TAILQ_ENTRY(ahc_softc) links;
/* Channel Names ('A', 'B', etc.) */
char channel;
char channel_b;
/* Initiator Bus ID */
uint8_t our_id;
uint8_t our_id_b;
/*
* PCI error detection.
*/
int unsolicited_ints;
/*
* Target incoming command FIFO.
*/
struct target_cmd *targetcmds;
uint8_t tqinfifonext;
/*
* Cached copy of the sequencer control register.
*/
uint8_t seqctl;
/*
* Incoming and outgoing message handling.
*/
uint8_t send_msg_perror;
ahc_msg_type msg_type;
uint8_t msgout_buf[12];/* Message we are sending */
uint8_t msgin_buf[12];/* Message we are receiving */
u_int msgout_len; /* Length of message to send */
u_int msgout_index; /* Current index in msgout */
u_int msgin_index; /* Current index in msgin */
/*
* Mapping information for data structures shared
* between the sequencer and kernel.
*/
bus_dma_tag_t parent_dmat;
bus_dma_tag_t shared_data_dmat;
bus_dmamap_t shared_data_dmamap;
bus_addr_t shared_data_busaddr;
/*
* Bus address of the one byte buffer used to
* work-around a DMA bug for chips <= aic7880
* in target mode.
*/
bus_addr_t dma_bug_buf;
/* Number of enabled target mode device on this card */
u_int enabled_luns;
/* Initialization level of this data structure */
u_int init_level;
/* PCI cacheline size. */
u_int pci_cachesize;
/*
* Count of parity errors we have seen as a target.
* We auto-disable parity error checking after seeing
* AHC_PCI_TARGET_PERR_THRESH number of errors.
*/
u_int pci_target_perr_count;
#define AHC_PCI_TARGET_PERR_THRESH 10
/* Maximum number of sequencer instructions supported. */
u_int instruction_ram_size;
/* Per-Unit descriptive information */
const char *description;
char *name;
int unit;
/* Selection Timer settings */
int seltime;
int seltime_b;
uint16_t user_discenable;/* Disconnection allowed */
uint16_t user_tagenable;/* Tagged Queuing allowed */
};
TAILQ_HEAD(ahc_softc_tailq, ahc_softc);
extern struct ahc_softc_tailq ahc_tailq;
/************************ Active Device Information ***************************/
typedef enum {
ROLE_UNKNOWN,
ROLE_INITIATOR,
ROLE_TARGET
} role_t;
struct ahc_devinfo {
int our_scsiid;
int target_offset;
uint16_t target_mask;
u_int target;
u_int lun;
char channel;
role_t role; /*
* Only guaranteed to be correct if not
* in the busfree state.
*/
};
/****************************** PCI Structures ********************************/
#define AHC_PCI_IOADDR PCIR_BAR(0) /* I/O Address */
#define AHC_PCI_MEMADDR PCIR_BAR(1) /* Mem I/O Address */
typedef int (ahc_device_setup_t)(struct ahc_softc *);
struct ahc_pci_identity {
uint64_t full_id;
uint64_t id_mask;
char *name;
ahc_device_setup_t *setup;
};
extern struct ahc_pci_identity ahc_pci_ident_table[];
extern const u_int ahc_num_pci_devs;
/***************************** VL/EISA Declarations ***************************/
struct aic7770_identity {
uint32_t full_id;
uint32_t id_mask;
const char *name;
ahc_device_setup_t *setup;
};
extern struct aic7770_identity aic7770_ident_table[];
extern const int ahc_num_aic7770_devs;
#define AHC_EISA_SLOT_SIZE 0x1000
#define AHC_EISA_SLOT_OFFSET 0xc00
#define AHC_EISA_IOSIZE 0x100
/*************************** Function Declarations ****************************/
/******************************************************************************/
u_int ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl);
void ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl);
void ahc_busy_tcl(struct ahc_softc *ahc,
u_int tcl, u_int busyid);
/***************************** PCI Front End *********************************/
struct ahc_pci_identity *ahc_find_pci_device(aic_dev_softc_t);
int ahc_pci_config(struct ahc_softc *,
struct ahc_pci_identity *);
int ahc_pci_test_register_access(struct ahc_softc *);
/*************************** EISA/VL Front End ********************************/
struct aic7770_identity *aic7770_find_device(uint32_t);
int aic7770_config(struct ahc_softc *ahc,
struct aic7770_identity *,
u_int port);
/************************** SCB and SCB queue management **********************/
int ahc_probe_scbs(struct ahc_softc *);
void ahc_run_untagged_queues(struct ahc_softc *ahc);
void ahc_run_untagged_queue(struct ahc_softc *ahc,
struct scb_tailq *queue);
void ahc_qinfifo_requeue_tail(struct ahc_softc *ahc,
struct scb *scb);
int ahc_match_scb(struct ahc_softc *ahc, struct scb *scb,
int target, char channel, int lun,
u_int tag, role_t role);
/****************************** Initialization ********************************/
struct ahc_softc *ahc_alloc(void *platform_arg, char *name);
int ahc_softc_init(struct ahc_softc *);
void ahc_controller_info(struct ahc_softc *ahc, char *buf);
int ahc_chip_init(struct ahc_softc *ahc);
int ahc_init(struct ahc_softc *ahc);
void ahc_intr_enable(struct ahc_softc *ahc, int enable);
void ahc_pause_and_flushwork(struct ahc_softc *ahc);
int ahc_suspend(struct ahc_softc *ahc);
int ahc_resume(struct ahc_softc *ahc);
void ahc_softc_insert(struct ahc_softc *);
void ahc_set_unit(struct ahc_softc *, int);
void ahc_set_name(struct ahc_softc *, char *);
int ahc_alloc_scbs(struct ahc_softc *ahc);
void ahc_free(struct ahc_softc *ahc);
int ahc_reset(struct ahc_softc *ahc, int reinit);
void ahc_shutdown(void *arg);
/*************************** Interrupt Services *******************************/
void ahc_clear_intstat(struct ahc_softc *ahc);
void ahc_run_qoutfifo(struct ahc_softc *ahc);
#ifdef AHC_TARGET_MODE
void ahc_run_tqinfifo(struct ahc_softc *ahc, int paused);
#endif
void ahc_handle_brkadrint(struct ahc_softc *ahc);
void ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat);
void ahc_handle_scsiint(struct ahc_softc *ahc,
u_int intstat);
void ahc_clear_critical_section(struct ahc_softc *ahc);
/***************************** Error Recovery *********************************/
typedef enum {
SEARCH_COMPLETE,
SEARCH_COUNT,
SEARCH_REMOVE
} ahc_search_action;
int ahc_search_qinfifo(struct ahc_softc *ahc, int target,
char channel, int lun, u_int tag,
role_t role, uint32_t status,
ahc_search_action action);
int ahc_search_untagged_queues(struct ahc_softc *ahc,
aic_io_ctx_t ctx,
int target, char channel,
int lun, uint32_t status,
ahc_search_action action);
int ahc_search_disc_list(struct ahc_softc *ahc, int target,
char channel, int lun, u_int tag,
int stop_on_first, int remove,
int save_state);
void ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb);
int ahc_reset_channel(struct ahc_softc *ahc, char channel,
int initiate_reset);
int ahc_abort_scbs(struct ahc_softc *ahc, int target,
char channel, int lun, u_int tag,
role_t role, uint32_t status);
void ahc_restart(struct ahc_softc *ahc);
void ahc_calc_residual(struct ahc_softc *ahc,
struct scb *scb);
void ahc_timeout(struct scb *scb);
void ahc_recover_commands(struct ahc_softc *ahc);
/*************************** Utility Functions ********************************/
struct ahc_phase_table_entry*
ahc_lookup_phase_entry(int phase);
void ahc_compile_devinfo(struct ahc_devinfo *devinfo,
u_int our_id, u_int target,
u_int lun, char channel,
role_t role);
/************************** Transfer Negotiation ******************************/
struct ahc_syncrate* ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
u_int *ppr_options, u_int maxsync);
u_int ahc_find_period(struct ahc_softc *ahc,
u_int scsirate, u_int maxsync);
void ahc_validate_offset(struct ahc_softc *ahc,
struct ahc_initiator_tinfo *tinfo,
struct ahc_syncrate *syncrate,
u_int *offset, int wide,
role_t role);
void ahc_validate_width(struct ahc_softc *ahc,
struct ahc_initiator_tinfo *tinfo,
u_int *bus_width,
role_t role);
/*
* Negotiation types. These are used to qualify if we should renegotiate
* even if our goal and current transport parameters are identical.
*/
typedef enum {
AHC_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */
AHC_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */
AHC_NEG_ALWAYS /* Renegotiat even if goal is async. */
} ahc_neg_type;
int ahc_update_neg_request(struct ahc_softc*,
struct ahc_devinfo*,
struct ahc_tmode_tstate*,
struct ahc_initiator_tinfo*,
ahc_neg_type);
void ahc_set_width(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
u_int width, u_int type, int paused);
void ahc_set_syncrate(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct ahc_syncrate *syncrate,
u_int period, u_int offset,
u_int ppr_options,
u_int type, int paused);
typedef enum {
AHC_QUEUE_NONE,
AHC_QUEUE_BASIC,
AHC_QUEUE_TAGGED
} ahc_queue_alg;
void ahc_set_tags(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
ahc_queue_alg alg);
/**************************** Target Mode *************************************/
#ifdef AHC_TARGET_MODE
void ahc_send_lstate_events(struct ahc_softc *,
struct ahc_tmode_lstate *);
void ahc_handle_en_lun(struct ahc_softc *ahc,
struct cam_sim *sim, union ccb *ccb);
cam_status ahc_find_tmode_devs(struct ahc_softc *ahc,
struct cam_sim *sim, union ccb *ccb,
struct ahc_tmode_tstate **tstate,
struct ahc_tmode_lstate **lstate,
int notfound_failure);
#ifndef AHC_TMODE_ENABLE
#define AHC_TMODE_ENABLE 0
#endif
#endif
/******************************* Debug ***************************************/
#ifdef AHC_DEBUG
extern uint32_t ahc_debug;
#define AHC_SHOW_MISC 0x0001
#define AHC_SHOW_SENSE 0x0002
#define AHC_DUMP_SEEPROM 0x0004
#define AHC_SHOW_TERMCTL 0x0008
#define AHC_SHOW_MEMORY 0x0010
#define AHC_SHOW_MESSAGES 0x0020
#define AHC_SHOW_DV 0x0040
#define AHC_SHOW_SELTO 0x0080
#define AHC_SHOW_QFULL 0x0200
#define AHC_SHOW_QUEUE 0x0400
#define AHC_SHOW_TQIN 0x0800
#define AHC_SHOW_MASKED_ERRORS 0x1000
#define AHC_DEBUG_SEQUENCER 0x2000
#endif
void ahc_print_scb(struct scb *scb);
void ahc_print_devinfo(struct ahc_softc *ahc,
struct ahc_devinfo *dev);
void ahc_dump_card_state(struct ahc_softc *ahc);
int ahc_print_register(ahc_reg_parse_entry_t *table,
u_int num_entries,
const char *name,
u_int address,
u_int value,
u_int *cur_column,
u_int wrap_point);
/******************************* SEEPROM *************************************/
int ahc_acquire_seeprom(struct ahc_softc *ahc,
struct seeprom_descriptor *sd);
void ahc_release_seeprom(struct seeprom_descriptor *sd);
#endif /* _AIC7XXX_H_ */
Reference in New Issue View Git Blame Copy Permalink