1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-27 11:55:06 +00:00
freebsd/sys/dev/mpr/mpr_pci.c
Kenneth D. Merry 991554f2c4 Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.

Some notes about this driver:
 o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
   this driver.

 o WarpDrive functionality has been removed, since it isn't supported in
   the 12Gb driver interface.

 o The Scatter/Gather list handling code is significantly different between
   the 6Gb and 12Gb hardware.  The 12Gb boards support IEEE Scatter/Gather
   lists.

Thanks to LSI for developing and testing this driver for FreeBSD.

share/man/man4/mpr.4:
	mpr(4) man page.

sys/dev/mpr/*:
	mpr(4) driver files.

sys/modules/Makefile,
sys/modules/mpr/Makefile:
	Add a module Makefile for the mpr(4) driver.

sys/conf/files:
	Add the mpr(4) driver.

sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
	Add the mpr(4) driver to all config files that currently
	have the mps(4) driver.

sys/ia64/conf/GENERIC:
	Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
	config file.

sys/i386/conf/XEN:
	Exclude the mpr module from building here.

Submitted by:	Steve McConnell <Stephen.McConnell@lsi.com>
MFC after:	3 days
Tested by:	Chris Reeves <chrisr@spectralogic.com>
Sponsored by:	LSI, Spectra Logic
Relnotes:	LSI 12Gb SAS driver mpr(4) added
2014-05-02 20:25:09 +00:00

351 lines
9.0 KiB
C

/*-
* Copyright (c) 2009 Yahoo! Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* PCI/PCI-X/PCIe bus interface for the LSI MPT2 controllers */
/* TODO Move headers to mprvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/malloc.h>
#include <sys/sysctl.h>
#include <sys/uio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
#include <dev/mpr/mpi/mpi2_type.h>
#include <dev/mpr/mpi/mpi2.h>
#include <dev/mpr/mpi/mpi2_ioc.h>
#include <dev/mpr/mpi/mpi2_cnfg.h>
#include <dev/mpr/mpi/mpi2_tool.h>
#include <sys/queue.h>
#include <sys/kthread.h>
#include <dev/mpr/mpr_ioctl.h>
#include <dev/mpr/mprvar.h>
static int mpr_pci_probe(device_t);
static int mpr_pci_attach(device_t);
static int mpr_pci_detach(device_t);
static int mpr_pci_suspend(device_t);
static int mpr_pci_resume(device_t);
static void mpr_pci_free(struct mpr_softc *);
static int mpr_alloc_msix(struct mpr_softc *sc, int msgs);
static int mpr_alloc_msi(struct mpr_softc *sc, int msgs);
static device_method_t mpr_methods[] = {
DEVMETHOD(device_probe, mpr_pci_probe),
DEVMETHOD(device_attach, mpr_pci_attach),
DEVMETHOD(device_detach, mpr_pci_detach),
DEVMETHOD(device_suspend, mpr_pci_suspend),
DEVMETHOD(device_resume, mpr_pci_resume),
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
{ 0, 0 }
};
static driver_t mpr_pci_driver = {
"mpr",
mpr_methods,
sizeof(struct mpr_softc)
};
static devclass_t mpr_devclass;
DRIVER_MODULE(mpr, pci, mpr_pci_driver, mpr_devclass, 0, 0);
MODULE_DEPEND(mpr, cam, 1, 1, 1);
struct mpr_ident {
uint16_t vendor;
uint16_t device;
uint16_t subvendor;
uint16_t subdevice;
u_int flags;
const char *desc;
} mpr_identifiers[] = {
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
0xffff, 0xffff, 0, "LSI SAS3004" },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
0xffff, 0xffff, 0, "LSI SAS3008" },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
0xffff, 0xffff, 0, "LSI SAS3108_1" },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
0xffff, 0xffff, 0, "LSI SAS3108_2" },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
0xffff, 0xffff, 0, "LSI SAS3108_5" },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
0xffff, 0xffff, 0, "LSI SAS3108_6" },
{ 0, 0, 0, 0, 0, NULL }
};
static struct mpr_ident *
mpr_find_ident(device_t dev)
{
struct mpr_ident *m;
for (m = mpr_identifiers; m->vendor != 0; m++) {
if (m->vendor != pci_get_vendor(dev))
continue;
if (m->device != pci_get_device(dev))
continue;
if ((m->subvendor != 0xffff) &&
(m->subvendor != pci_get_subvendor(dev)))
continue;
if ((m->subdevice != 0xffff) &&
(m->subdevice != pci_get_subdevice(dev)))
continue;
return (m);
}
return (NULL);
}
static int
mpr_pci_probe(device_t dev)
{
struct mpr_ident *id;
if ((id = mpr_find_ident(dev)) != NULL) {
device_set_desc(dev, id->desc);
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
static int
mpr_pci_attach(device_t dev)
{
struct mpr_softc *sc;
struct mpr_ident *m;
int error;
sc = device_get_softc(dev);
bzero(sc, sizeof(*sc));
sc->mpr_dev = dev;
m = mpr_find_ident(dev);
sc->mpr_flags = m->flags;
/* Twiddle basic PCI config bits for a sanity check */
pci_enable_busmaster(dev);
/* Allocate the System Interface Register Set */
sc->mpr_regs_rid = PCIR_BAR(1);
if ((sc->mpr_regs_resource = bus_alloc_resource_any(dev,
SYS_RES_MEMORY, &sc->mpr_regs_rid, RF_ACTIVE)) == NULL) {
mpr_printf(sc, "Cannot allocate PCI registers\n");
return (ENXIO);
}
sc->mpr_btag = rman_get_bustag(sc->mpr_regs_resource);
sc->mpr_bhandle = rman_get_bushandle(sc->mpr_regs_resource);
/* Allocate the parent DMA tag */
if (bus_dma_tag_create( bus_get_dma_tag(dev), /* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT,/* maxsize */
BUS_SPACE_UNRESTRICTED, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->mpr_parent_dmat)) {
mpr_printf(sc, "Cannot allocate parent DMA tag\n");
mpr_pci_free(sc);
return (ENOMEM);
}
if ((error = mpr_attach(sc)) != 0)
mpr_pci_free(sc);
return (error);
}
int
mpr_pci_setup_interrupts(struct mpr_softc *sc)
{
device_t dev;
int i, error, msgs;
dev = sc->mpr_dev;
error = ENXIO;
if ((sc->disable_msix == 0) &&
((msgs = pci_msix_count(dev)) >= MPR_MSI_COUNT))
error = mpr_alloc_msix(sc, MPR_MSI_COUNT);
if ((error != 0) && (sc->disable_msi == 0) &&
((msgs = pci_msi_count(dev)) >= MPR_MSI_COUNT))
error = mpr_alloc_msi(sc, MPR_MSI_COUNT);
if (error != 0) {
sc->mpr_flags |= MPR_FLAGS_INTX;
sc->mpr_irq_rid[0] = 0;
sc->mpr_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->mpr_irq_rid[0], RF_SHAREABLE | RF_ACTIVE);
if (sc->mpr_irq[0] == NULL) {
mpr_printf(sc, "Cannot allocate INTx interrupt\n");
return (ENXIO);
}
error = bus_setup_intr(dev, sc->mpr_irq[0],
INTR_TYPE_BIO | INTR_MPSAFE, NULL, mpr_intr, sc,
&sc->mpr_intrhand[0]);
if (error)
mpr_printf(sc, "Cannot setup INTx interrupt\n");
} else {
sc->mpr_flags |= MPR_FLAGS_MSI;
for (i = 0; i < MPR_MSI_COUNT; i++) {
sc->mpr_irq_rid[i] = i + 1;
sc->mpr_irq[i] = bus_alloc_resource_any(dev,
SYS_RES_IRQ, &sc->mpr_irq_rid[i], RF_ACTIVE);
if (sc->mpr_irq[i] == NULL) {
mpr_printf(sc,
"Cannot allocate MSI interrupt\n");
return (ENXIO);
}
error = bus_setup_intr(dev, sc->mpr_irq[i],
INTR_TYPE_BIO | INTR_MPSAFE, NULL, mpr_intr_msi,
sc, &sc->mpr_intrhand[i]);
if (error) {
mpr_printf(sc,
"Cannot setup MSI interrupt %d\n", i);
break;
}
}
}
return (error);
}
static int
mpr_pci_detach(device_t dev)
{
struct mpr_softc *sc;
int error;
sc = device_get_softc(dev);
if ((error = mpr_free(sc)) != 0)
return (error);
mpr_pci_free(sc);
return (0);
}
static void
mpr_pci_free(struct mpr_softc *sc)
{
int i;
if (sc->mpr_parent_dmat != NULL) {
bus_dma_tag_destroy(sc->mpr_parent_dmat);
}
if (sc->mpr_flags & MPR_FLAGS_MSI) {
for (i = 0; i < MPR_MSI_COUNT; i++) {
if (sc->mpr_irq[i] != NULL) {
bus_teardown_intr(sc->mpr_dev, sc->mpr_irq[i],
sc->mpr_intrhand[i]);
bus_release_resource(sc->mpr_dev, SYS_RES_IRQ,
sc->mpr_irq_rid[i], sc->mpr_irq[i]);
}
}
pci_release_msi(sc->mpr_dev);
}
if (sc->mpr_flags & MPR_FLAGS_INTX) {
bus_teardown_intr(sc->mpr_dev, sc->mpr_irq[0],
sc->mpr_intrhand[0]);
bus_release_resource(sc->mpr_dev, SYS_RES_IRQ,
sc->mpr_irq_rid[0], sc->mpr_irq[0]);
}
if (sc->mpr_regs_resource != NULL) {
bus_release_resource(sc->mpr_dev, SYS_RES_MEMORY,
sc->mpr_regs_rid, sc->mpr_regs_resource);
}
return;
}
static int
mpr_pci_suspend(device_t dev)
{
return (EINVAL);
}
static int
mpr_pci_resume(device_t dev)
{
return (EINVAL);
}
static int
mpr_alloc_msix(struct mpr_softc *sc, int msgs)
{
int error;
error = pci_alloc_msix(sc->mpr_dev, &msgs);
return (error);
}
static int
mpr_alloc_msi(struct mpr_softc *sc, int msgs)
{
int error;
error = pci_alloc_msi(sc->mpr_dev, &msgs);
return (error);
}
int
mpr_pci_restore(struct mpr_softc *sc)
{
struct pci_devinfo *dinfo;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
dinfo = device_get_ivars(sc->mpr_dev);
if (dinfo == NULL) {
mpr_dprint(sc, MPR_FAULT, "%s: NULL dinfo\n", __func__);
return (EINVAL);
}
pci_cfg_restore(sc->mpr_dev, dinfo);
return (0);
}