1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/dev/lnc/if_lncreg.h
Paul Richards cc6ed8bf5e (There's two of these now (Am7990.h and am7990.h) and they need to
be merged at some point)

New AMD family ethernet driver. Should support BICC,NE2100, TNIC,
AT1500 and anything else that uses a Lance/PCnet type chip. Only been
tested with the BICC so far though.

Still work to do on performance and MULTICAST support needs to be added
but it's basically working and I want the revision history from this
point on
1994-10-02 21:16:01 +00:00

168 lines
5.2 KiB
C

/*
* Am7990, Local Area Network Controller for Ethernet (LANCE)
*
* Copyright (c) 1994, Paul Richards. This software may be used,
* modified, copied, distributed, and sold, in both source and binary
* form provided that the above copyright and these terms are retained.
* Under no circumstances is the author responsible for the proper
* functioning of this software, nor does the author assume any
* responsibility for damages incurred with its use.
*
*/
/*
* The LANCE has four Control and Status Registers(CSRs) which are accessed
* through two bus addressable ports, the address port (RAP) and the data
* port (RDP).
*
*/
#define CSR0 0
#define CSR1 1
#define CSR2 2
#define CSR3 3
#define CSR88 88
#define CSR89 89
/* Control and Status Register Masks */
/* CSR0 */
#define ERR 0x8000
#define BABL 0x4000
#define CERR 0x2000
#define MISS 0x1000
#define MERR 0x0800
#define RINT 0x0400
#define TINT 0x0200
#define IDON 0x0100
#define INTR 0x0080
#define INEA 0x0040
#define RXON 0x0020
#define TXON 0x0010
#define TDMD 0x0008
#define STOP 0x0004
#define STRT 0x0002
#define INIT 0x0001
/*
* CSR3
*
* Bits 3-15 are reserved.
*
*/
#define BSWP 0x0004
#define ACON 0x0002
#define BCON 0x0001
/* Initialisation block */
struct init_block {
u_short mode; /* Mode register */
u_char padr[6]; /* Ethernet address */
u_char ladrf[8]; /* Logical address filter (multicast) */
u_short rdra; /* Low order pointer to receive ring */
u_short rlen; /* High order pointer and no. rings */
u_short tdra; /* Low order pointer to transmit ring */
u_short tlen; /* High order pointer and no rings */
};
/* Initialisation Block Mode Register Masks */
#define PROM 0x8000 /* Promiscuous Mode */
#define DRCVBC 0x4000 /* Disable Receive Broadcast */
#define DRCVPA 0x2000 /* Disable Receive Physical Address */
#define DLNKTST 0x1000 /* Disable Link Status */
#define DAPC 0x0800 /* Disable Automatic Polarity Correction */
#define MENDECL 0x0400 /* MENDEC Loopback Mode */
#define LRT 0x0200 /* Low Receive Threshold (T-MAU mode only) */
#define TSEL 0x0200 /* Transmit Mode Select (AUI mode only) */
#define PORTSEL 0x0180 /* Port Select bits */
#define INTL 0x0040 /* Internal Loopback */
#define DRTY 0x0020 /* Disable Retry */
#define FCOLL 0x0010 /* Force Collision */
#define DXMTFCS 0x0008 /* Disable transmit CRC (FCS) */
#define LOOP 0x0004 /* Loopback Enabl */
#define DTX 0x0002 /* Disable the transmitter */
#define DRX 0x0001 /* Disable the receiver */
/*
* Message Descriptor Structure
*
* Each transmit or receive descriptor ring entry (RDRE's and TDRE's)
* is composed of 4, 16-bit, message descriptors. They contain the following
* information.
*
* 1. The address of the actual message data buffer in user (host) memory.
* 2. The length of that message buffer.
* 3. The status information for that particular buffer. The eight most
* significant bits of md1 are collectively termed the STATUS of the
* descriptor.
*
* Descriptor md0 contains LADR 0-15, the low order 16 bits of the 24-bit
* address of the actual data buffer. Bits 0-7 of descriptor md1 contain
* HADR, the high order 8-bits of the 24-bit data buffer address. Bits 8-15
* of md1 contain the status flags of the buffer. Descriptor md2 contains the
* buffer byte count in bits 0-11 as a two's complement number and must have
* 1's written to bits 12-15. For the receive entry md3 has the Message Byte
* Count in bits 0-11, this is the length of the received message and is valid
* only when ERR is cleared and ENP is set. For the transmit entry it contains
* more status information.
*
*/
struct mds {
u_short md0;
u_short md1;
short md2;
u_short md3;
};
/* Receive STATUS flags for md1 */
#define OWN 0x8000 /* Owner bit, 0=host, 1=Lance */
#define MDERR 0x4000 /* Error */
#define FRAM 0x2000 /* Framing error error */
#define OFLO 0x1000 /* Silo overflow */
#define CRC 0x0800 /* CRC error */
#define RBUFF 0x0400 /* Buffer error */
#define STP 0x0200 /* Start of packet */
#define ENP 0x0100 /* End of packet */
#define HADR 0x00FF /* High order address bits */
/* Receive STATUS flags for md2 */
#define BCNT 0x0FFF /* Size of data buffer as 2's comp. no. */
/* Receive STATUS flags for md3 */
#define MCNT 0x0FFF /* Total size of data for received packet */
/* Transmit STATUS flags for md1 */
#define ADD_FCS 0x2000 /* Controls generation of FCS */
#define MORE 0x1000 /* Indicates more than one retry was needed */
#define ONE 0x0800 /* Exactly one retry was needed */
#define DEF 0x0400 /* Packet transmit deferred -- channel busy */
/*
* Transmit status flags for md2
*
* Same as for receive descriptor.
*
* BCNT 0x0FFF Size of data buffer as 2's complement number.
*
*/
/* Transmit status flags for md3 */
#define TBUFF 0x8000 /* Buffer error */
#define UFLO 0x4000 /* Silo underflow */
#define LCOL 0x1000 /* Late collision */
#define LCAR 0x0800 /* Loss of carrier */
#define RTRY 0x0400 /* Tried 16 times */
#define TDR 0x03FF /* Time domain reflectometry */