mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
Code Issues Releases Activity
09a8dfa260
freebsd/sys/i386/isa/pcvt/pcvt_ext.c
Rodney W. Grimes 9b2e535452 Remove trailing whitespace.
1995-05-30 08:16:23 +00:00

2835 lines
69 KiB
C
Raw Blame History

/*
* Copyright (c) 1992, 1995 Hellmuth Michaelis and Joerg Wunsch.
*
* Copyright (C) 1992, 1993 Soeren Schmidt.
*
* All rights reserved.
*
* For the sake of compatibility, portions of this code regarding the
* X server interface are taken from Soeren Schmidt's syscons driver.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by
* Hellmuth Michaelis, Joerg Wunsch and Soeren Schmidt.
* 4. The name authors may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* @(#)pcvt_ext.c, 3.20, Last Edit-Date: [Thu Apr 6 10:07:45 1995]
*
*/
/*---------------------------------------------------------------------------*
*
* pcvt_ext.c VT220 Driver Extended Support Routines
* ------------------------------------------------------
*
* -hm ------------ Release 3.00 --------------
* -hm integrating NetBSD-current patches
* -hm applied Onno van der Linden's patch for Cirrus BIOS upgrade
* -hm pcvt_x_hook has to care about fkey labels now
* -hm changed some bcopyb's to bcopy's
* -hm TS_INDEX -> TS_DATA for cirrus (mail from Onno/Charles)
* -jw removed kbc_8042(), and replaced by kbd_emulate_pc()
* -hm X server patch from John Kohl <jtk@kolvir.blrc.ma.us>
* -hm applying Joerg's patch for FreeBSD 2.0
* -hm enable 132 col support for Trident TVGA8900CL
* -hm applying patch from Joerg fixing Crtat bug
* -hm removed PCVT_FAKE_SYSCONS10
* -hm fastscroll/Crtat bugfix from Lon Willett
* -hm bell patch from Thomas Eberhardt for NetBSD
* -hm multiple X server bugfixes from Lon Willett
* -hm patch from John Kohl fixing tsleep bug in usl_vt_ioctl()
* -hm bugfix: clear 25th line when switching to a force 24 lines vt
* -jw add some forward declarations
* -hm fixing MDA re-init when leaving X
* -hm patch from John Kohl fixing potential divide by 0 problem
*
*---------------------------------------------------------------------------*/
#include "vt.h"
#if NVT > 0
#include "pcvt_hdr.h" /* global include */
static int s3testwritable( void );
static int et4000_col( int );
static int wd90c11_col( int );
static int tri9000_col( int );
static int v7_1024i_col( int );
static int s3_928_col( int );
static int cl_gd542x_col( int );
/* storage to save video timing values of 80 columns text mode */
static union {
u_char generic[11];
u_char et4000[11];
u_char wd90c11[12];
u_char tri9000[13];
u_char v7_1024i[17];
u_char s3_928[32];
u_char cirrus[13];
}
savearea;
static int regsaved = 0; /* registers are saved to savearea */
/*---------------------------------------------------------------------------*
*
* Find out which video board we are running on, taken from:
* Richard Ferraro: Programmers Guide to the EGA and VGA Cards
* and from David E. Wexelblat's SuperProbe Version 1.0.
* When a board is found, for which 132 column switching is
* provided, the global variable "can_do_132col" is set to 1,
* also the global variable vga_family is set to what we found.
*
* ###############################################################
* ## THIS IS GETTING MORE AND MORE A LARGE SPAGHETTI HACK !!!! ##
* ###############################################################
*
*---------------------------------------------------------------------------*/
u_char
vga_chipset(void)
{
u_char *ptr;
u_char byte, oldbyte, old1byte, newbyte;
#if PCVT_132GENERIC
can_do_132col = 1; /* assumes everyone can do 132 col */
#else
can_do_132col = 0; /* assumes noone can do 132 col */
#endif /* PCVT_132GENERIC */
vga_family = VGA_F_NONE;
/*---------------------------------------------------------------------------*
* check for Western Digital / Paradise chipsets
*---------------------------------------------------------------------------*/
ptr = (u_char *)Crtat;
if(color)
ptr += (0xc007d - 0xb8000);
else
ptr += (0xc007d - 0xb0000);
if((*ptr++ == 'V') && (*ptr++ == 'G') &&
(*ptr++ == 'A') && (*ptr++ == '='))
{
int wd90c10;
vga_family = VGA_F_WD;
outb(addr_6845, 0x2b);
oldbyte = inb(addr_6845+1);
outb(addr_6845+1, 0xaa);
newbyte = inb(addr_6845+1);
outb(addr_6845+1, oldbyte);
if(newbyte != 0xaa)
return(VGA_PVGA); /* PVGA1A chip */
outb(TS_INDEX, 0x12);
oldbyte = inb(TS_DATA);
outb(TS_DATA, oldbyte & 0xbf);
newbyte = inb(TS_DATA) & 0x40;
if(newbyte != 0)
return(VGA_WD90C00); /* WD90C00 chip */
outb(TS_DATA, oldbyte | 0x40);
newbyte = inb(TS_DATA) & 0x40;
if(newbyte == 0)
return(VGA_WD90C00); /* WD90C00 chip */
outb(TS_DATA, oldbyte);
wd90c10 = 0;
outb(TS_INDEX, 0x10);
oldbyte = inb(TS_DATA);
outb(TS_DATA, oldbyte & 0xfb);
newbyte = inb(TS_DATA) & 0x04;
if(newbyte != 0)
wd90c10 = 1;
outb(TS_DATA, oldbyte | 0x04);
newbyte = inb(TS_DATA) & 0x04;
if(newbyte == 0)
wd90c10 = 1;
outb(TS_DATA, oldbyte);
if(wd90c10)
return(VGA_WD90C10);
else
{
can_do_132col = 1;
return(VGA_WD90C11);
}
}
/*---------------------------------------------------------------------------*
* check for Trident chipsets
*---------------------------------------------------------------------------*/
outb(TS_INDEX, 0x0b);
oldbyte = inb(TS_DATA);
outb(TS_INDEX, 0x0b);
outb(TS_DATA, 0x00);
byte = inb(TS_DATA); /* chipset type */
outb(TS_INDEX, 0x0e);
old1byte = inb(TS_DATA);
outb(TS_DATA, 0);
newbyte = inb(TS_DATA);
outb(TS_DATA, (old1byte ^ 0x02));
outb(TS_INDEX, 0x0b);
outb(TS_DATA, oldbyte);
if((newbyte & 0x0f) == 0x02)
{
/* is a trident chip */
vga_family = VGA_F_TRI;
switch(byte)
{
case 0x01:
return(VGA_TR8800BR);
case 0x02:
return(VGA_TR8800CS);
case 0x03:
can_do_132col = 1;
return(VGA_TR8900B);
case 0x04:
case 0x13:
/* Haven't tried, but should work */
can_do_132col = 1;
return(VGA_TR8900C);
case 0x23:
can_do_132col = 1;
return(VGA_TR9000);
case 0x33:
can_do_132col = 1;
return(VGA_TR8900CL);
case 0x83:
return(VGA_TR9200);
case 0x93:
return(VGA_TR9100);
default:
return(VGA_TRUNKNOWN);
}
}
/*---------------------------------------------------------------------------*
* check for Tseng Labs ET3000/4000 chipsets
*---------------------------------------------------------------------------*/
outb(GN_HERCOMPAT, 0x06);
if(color)
outb(GN_DMCNTLC, 0xa0);
else
outb(GN_DMCNTLM, 0xa0);
/* read old value */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MISC);
oldbyte = inb(ATC_DATAR);
/* write new value */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MISC);
newbyte = oldbyte ^ 0x10;
outb(ATC_DATAW, newbyte);
/* read back new value */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MISC);
byte = inb(ATC_DATAR);
/* write back old value */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MISC);
outb(ATC_DATAW, oldbyte);
if(byte == newbyte) /* ET3000 or ET4000 */
{
vga_family = VGA_F_TSENG;
outb(addr_6845, CRTC_EXTSTART);
oldbyte = inb(addr_6845+1);
newbyte = oldbyte ^ 0x0f;
outb(addr_6845+1, newbyte);
byte = inb(addr_6845+1);
outb(addr_6845+1, oldbyte);
if(byte == newbyte)
{
can_do_132col = 1;
return(VGA_ET4000);
}
else
{
return(VGA_ET3000);
}
}
/*---------------------------------------------------------------------------*
* check for Video7 VGA chipsets
*---------------------------------------------------------------------------*/
outb(TS_INDEX, TS_EXTCNTL); /* enable extensions */
outb(TS_DATA, 0xea);
outb(addr_6845, CRTC_STARTADRH);
oldbyte = inb(addr_6845+1);
outb(addr_6845+1, 0x55);
newbyte = inb(addr_6845+1);
outb(addr_6845, CRTC_V7ID); /* id register */
byte = inb(addr_6845+1); /* read id */
outb(addr_6845, CRTC_STARTADRH);
outb(addr_6845+1, oldbyte);
outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */
outb(TS_DATA, 0xae);
if(byte == (0x55 ^ 0xea))
{ /* is Video 7 */
vga_family = VGA_F_V7;
outb(TS_INDEX, TS_EXTCNTL); /* enable extensions */
outb(TS_DATA, 0xea);
outb(TS_INDEX, TS_V7CHIPREV);
byte = inb(TS_DATA);
outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */
outb(TS_DATA, 0xae);
if(byte < 0xff && byte >= 0x80)
return(VGA_V7VEGA);
if(byte < 0x7f && byte >= 0x70)
return(VGA_V7FWVR);
if(byte < 0x5a && byte >= 0x50)
return(VGA_V7V5);
if(byte < 0x4a && byte > 0x40)
{
can_do_132col = 1;
return(VGA_V71024I);
}
return(VGA_V7UNKNOWN);
}
/*---------------------------------------------------------------------------*
* check for S3 chipsets
*---------------------------------------------------------------------------*/
outb(addr_6845, 0x38); /* reg 1 lock register */
old1byte = inb(addr_6845+1); /* get old value */
outb(addr_6845, 0x38);
outb(addr_6845+1, 0x00); /* lock registers */
if(s3testwritable() == 0) /* check if locked */
{
outb(addr_6845, 0x38);
outb(addr_6845+1, 0x48); /* unlock registers */
if(s3testwritable() == 1 ) /* check if unlocked */
{
vga_family = VGA_F_S3; /* FAMILY S3 */
outb(addr_6845, 0x30); /* chip id/rev reg */
byte = inb(addr_6845+1);
switch(byte & 0xf0)
{
case 0x80:
switch(byte & 0x0f)
{
case 0x01:
outb(addr_6845, 0x38);
outb(addr_6845+1, old1byte);
return VGA_S3_911;
case 0x02:
outb(addr_6845, 0x38);
outb(addr_6845+1, old1byte);
return VGA_S3_924;
default:
outb(addr_6845, 0x38);
outb(addr_6845+1, old1byte);
return VGA_S3_UNKNOWN;
}
break;
case 0xA0:
outb(addr_6845, 0x38);
outb(addr_6845+1, old1byte);
return VGA_S3_80x;
case 0x90:
case 0xb0:
outb(addr_6845, 0x38);
outb(addr_6845+1, old1byte);
can_do_132col = 1;
return VGA_S3_928;
default:
outb(addr_6845, 0x38);
outb(addr_6845+1, old1byte);
return VGA_S3_UNKNOWN;
}
}
}
/*---------------------------------------------------------------------------*
* check for Cirrus chipsets
*---------------------------------------------------------------------------*/
outb(TS_INDEX, 6);
oldbyte = inb(TS_DATA);
outb(TS_INDEX, 6);
outb(TS_DATA, 0x12);
outb(TS_INDEX, 6);
newbyte = inb(TS_DATA);
outb(addr_6845, 0x27);
byte = inb(addr_6845 + 1);
outb(TS_INDEX, 6);
outb(TS_DATA, oldbyte);
if (newbyte == 0x12) {
vga_family = VGA_F_CIR;
can_do_132col = 1;
switch ((byte & 0xfc) >> 2) {
case 0x22:
switch (byte & 3) {
case 0:
return VGA_CL_GD5402;
case 1:
return VGA_CL_GD5402r1;
case 2:
return VGA_CL_GD5420;
case 3:
return VGA_CL_GD5420r1;
}
break;
case 0x23:
return VGA_CL_GD5422;
case 0x25:
return VGA_CL_GD5424;
case 0x24:
return VGA_CL_GD5426;
case 0x26:
return VGA_CL_GD5428;
}
}
return(VGA_UNKNOWN);
}
/*---------------------------------------------------------------------------
* test if index 35 lower nibble is writable (taken from SuperProbe 1.0)
*---------------------------------------------------------------------------*/
static int
s3testwritable(void)
{
u_char old, new1, new2;
outb(addr_6845, 0x35);
old = inb(addr_6845+1); /* save */
outb(addr_6845, 0x35);
outb(addr_6845+1, (old & 0xf0)); /* write 0 */
outb(addr_6845, 0x35);
new1 = (inb(addr_6845+1)) & 0x0f; /* must read 0 */
outb(addr_6845, 0x35);
outb(addr_6845+1, (old | 0x0f)); /* write 1 */
outb(addr_6845, 0x35);
new2 = (inb(addr_6845+1)) & 0x0f; /* must read 1 */
outb(addr_6845, 0x35);
outb(addr_6845+1, old); /* restore */
return((new1==0) && (new2==0x0f));
}
/*---------------------------------------------------------------------------*
* return ptr to string describing vga type
*---------------------------------------------------------------------------*/
char *
vga_string(int number)
{
static char *vga_tab[] = {
"generic",
"et4000",
"et3000",
"pvga1a",
"wd90c00",
"wd90c10",
"wd90c11",
"v7 vega",
"v7 fast",
"v7 ver5",
"v7 1024i",
"unknown v7",
"tvga 8800br",
"tvga 8800cs",
"tvga 8900b",
"tvga 8900c",
"tvga 8900cl",
"tvga 9000",
"tvga 9100",
"tvga 9200",
"unknown trident",
"s3 911",
"s3 924",
"s3 801/805",
"s3 928",
"unkown s3",
"cl-gd5402",
"cl-gd5402r1",
"cl-gd5420",
"cl-gd5420r1",
"cl-gd5422",
"cl-gd5424",
"cl-gd5426",
"cl-gd5428"
};
return(vga_tab[number]);
}
/*---------------------------------------------------------------------------*
* toggle vga 80/132 column operation
*---------------------------------------------------------------------------*/
int
vga_col(struct video_state *svsp, int cols)
{
int ret = 0;
if(adaptor_type != VGA_ADAPTOR)
return(0);
switch(vga_type)
{
case VGA_ET4000:
ret = et4000_col(cols);
break;
case VGA_WD90C11:
ret = wd90c11_col(cols);
break;
case VGA_TR8900B:
case VGA_TR8900C:
case VGA_TR8900CL:
case VGA_TR9000:
ret = tri9000_col(cols);
break;
case VGA_V71024I:
ret = v7_1024i_col(cols);
break;
case VGA_S3_928:
ret = s3_928_col(cols);
break;
case VGA_CL_GD5402:
case VGA_CL_GD5402r1:
case VGA_CL_GD5420:
case VGA_CL_GD5420r1:
case VGA_CL_GD5422:
case VGA_CL_GD5424:
case VGA_CL_GD5426:
case VGA_CL_GD5428:
ret = cl_gd542x_col(cols);
break;
default:
#if PCVT_132GENERIC
ret = generic_col(cols);
#endif /* PCVT_132GENERIC */
break;
}
if(ret == 0)
return(0); /* failed */
svsp->maxcol = cols;
return(1);
}
#if PCVT_132GENERIC
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for "generic" SVGAs
* NB: this is supposed to work on any (S)VGA as long as the monitor
* is able to sync down to 21.5 kHz horizontally. The resulting
* vertical frequency is only 50 Hz, so if there is some better board
* specific algorithm, we avoid using this generic one.
* REPORT ANY FAILURES SO WE CAN IMPROVE THIS
*---------------------------------------------------------------------------*/
#if PCVT_EXP_132COL
/*
* Some improved (i.e. higher scan rates) figures for the horizontal
* timing. USE AT YOUR OWN RISK, THIS MIGHT DAMAGE YOUR MONITOR DUE
* TO A LOSS OF HORIZONTAL SYNC!
* The figures have been tested with an ET3000 board along with a
* NEC MultiSync 3D monitor. If you are playing here, consider
* testing with several screen pictures (dark background vs. light
* background, even enlightening the border color may impact the
* result - you can do this e.g. by "scon -p black,42,42,42")
* Remember that all horizontal timing values must be dividable
* by 8! (The scheme below is taken so that nifty kernel hackers
* are able to patch the figures at run-time.)
*
* The actual numbers result in 23 kHz line scan and 54 Hz vertical
* scan.
*/
#endif /* PCVT_EXP_132COL */
int
generic_col(int cols)
{
u_char *sp;
u_char byte;
#if !PCVT_EXP_132COL
/* stable figures for any multisync monitor that syncs down to 22 kHz*/
static volatile u_short htotal = 1312;
static volatile u_short displayend = 1056;
static volatile u_short blankstart = 1072;
static volatile u_short syncstart = 1112;
static volatile u_short syncend = 1280;
#else /* PCVT_EXP_132COL */
/* reduced sync-pulse width and sync delays */
static volatile u_short htotal = 1232;
static volatile u_short displayend = 1056;
static volatile u_short blankstart = 1056;
static volatile u_short syncstart = 1104;
static volatile u_short syncend = 1168;
#endif /* PCVT_EXP_132COL */
vga_screen_off();
/* enable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte & 0x7f);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
sp = savearea.generic;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x03); /* Horizontal Blank End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13); /* Row Offset Register */
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
*sp++ = inb(GN_MISCOUTR); /* Misc output register */
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, (htotal / 8) - 5);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, (displayend / 8) - 1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, blankstart / 8);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, ((syncend / 8) & 0x1f) | 0x80);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, syncstart / 8);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1,
(((syncend / 8) & 0x20) * 4)
| ((syncend / 8) & 0x1f));
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, 0x01); /* 8 dot char clock */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */
outb(ATC_DATAW, 0x08); /* Line graphics disable */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */
outb(ATC_DATAW, 0x00);
/* Misc output register */
/* use the 28.322 MHz clock */
outb(GN_MISCOUTW, (inb(GN_MISCOUTR) & ~0x0c) | 4);
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
vga_screen_on();
return(0);
}
sp = savearea.generic;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
}
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
vga_screen_on();
return(1);
}
#endif /* PCVT_132GENERIC */
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for ET4000 based boards
*---------------------------------------------------------------------------*/
int
et4000_col(int cols)
{
u_char *sp;
u_char byte;
vga_screen_off();
/* enable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte & 0x7f);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
sp = savearea.et4000;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13); /* Row Offset Register */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x34); /* 6845 Compatibility */
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
*sp++ = inb(GN_MISCOUTR); /* Misc output register */
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, 0x9f);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, 0x83);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, 0x84);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, 0x8b);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, 0x80);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
outb(addr_6845, 0x34); /* 6845 Compatibility */
outb(addr_6845+1, 0x0a);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, 0x01); /* 8 dot char clock */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */
outb(ATC_DATAW, 0x08); /* Line graphics disable */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */
outb(ATC_DATAW, 0x00);
/* Misc output register */
outb(GN_MISCOUTW, (inb(GN_MISCOUTR) & ~0x0c));
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
vga_screen_on();
return(0);
}
sp = savearea.et4000;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x34); /* 6845 Compatibility */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
}
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
vga_screen_on();
return(1);
}
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for WD/Paradise based boards
*
* when this card does 132 cols, the char map select register (TS_INDEX,
* TS_FONTSEL) function bits get REDEFINED. whoever did design this,
* please don't cross my way ever .......
*
*---------------------------------------------------------------------------*/
int
wd90c11_col(int cols)
{
#if !PCVT_BACKUP_FONTS
static unsigned char *sv_fontwd[NVGAFONTS];
#endif /* !PCVT_BACKUP_FONTS */
u_char *sp;
u_char byte;
int i;
vga_screen_off();
/* enable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte & 0x7f);
/* enable access to WD/Paradise "control extensions" */
outb(GDC_INDEX, GDC_PR5GPLOCK);
outb(GDC_INDEX, 0x05);
outb(addr_6845, CRTC_PR10);
outb(addr_6845, 0x85);
outb(TS_INDEX, TS_UNLOCKSEQ);
outb(TS_DATA, 0x48);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
/* save current fonts */
#if !PCVT_BACKUP_FONTS
for(i = 0; i < totalfonts; i++)
{
if(vgacs[i].loaded)
{
if((sv_fontwd[i] =
(u_char *)malloc(32 * 256,
M_DEVBUF,
M_WAITOK))
== NULL)
printf("pcvt: no font buffer\n");
else
vga_move_charset(i,
sv_fontwd[i],
1);
}
else
{
sv_fontwd[i] = 0;
}
}
#endif /* !PCVT_BACKUP_FONTS */
sp = savearea.wd90c11;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x03); /* Horizontal Blank End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13); /* Row Offset Register */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x2e); /* misc 1 */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x2f); /* misc 2 */
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, 0x10);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
outb(TS_INDEX, 0x12);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
*sp++ = inb(GN_MISCOUTR); /* Misc output register */
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, 0x9c);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, 0x83);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, 0x84);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, 0x9f);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, 0x8a);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, 0x1c);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
outb(addr_6845, 0x2e); /* misc 1 */
outb(addr_6845+1, 0x04);
outb(addr_6845, 0x2f); /* misc 2 */
outb(addr_6845+1, 0x00);
outb(TS_INDEX, 0x10);/* Timing Sequencer */
outb(TS_DATA, 0x21);
outb(TS_INDEX, 0x12);/* Timing Sequencer */
outb(TS_DATA, 0x14);
outb(GN_MISCOUTW, (inb(GN_MISCOUTR) | 0x08)); /* Misc output register */
vsp->wd132col = 1;
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
/* disable access to WD/Paradise "control extensions" */
outb(GDC_INDEX, GDC_PR5GPLOCK);
outb(GDC_INDEX, 0x00);
outb(addr_6845, CRTC_PR10);
outb(addr_6845, 0x00);
outb(TS_INDEX, TS_UNLOCKSEQ);
outb(TS_DATA, 0x00);
vga_screen_on();
return(0);
}
sp = savearea.wd90c11;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x2e); /* misc 1 */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x2f); /* misc 2 */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, 0x10);/* Timing Sequencer */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, 0x12);/* Timing Sequencer */
outb(addr_6845+1, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
vsp->wd132col = 0;
}
/* restore fonts */
#if !PCVT_BACKUP_FONTS
for(i = 0; i < totalfonts; i++)
{
if(sv_fontwd[i])
vga_move_charset(i, sv_fontwd[i], 0);
}
#else
for(i = 0; i < totalfonts; i++)
if(saved_charsets[i])
vga_move_charset(i, 0, 0);
#endif /* !PCVT_BACKUP_FONTS */
select_vga_charset(vsp->vga_charset);
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
/* disable access to WD/Paradise "control extensions" */
outb(GDC_INDEX, GDC_PR5GPLOCK);
outb(GDC_INDEX, 0x00);
outb(addr_6845, CRTC_PR10);
outb(addr_6845, 0x00);
outb(TS_INDEX, TS_UNLOCKSEQ);
outb(TS_DATA, 0x00);
vga_screen_on();
return(1);
}
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for TRIDENT 9000 based boards
*---------------------------------------------------------------------------*/
int
tri9000_col(int cols)
{
u_char *sp;
u_char byte;
vga_screen_off();
/* sync reset is necessary to preserve memory contents ... */
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x01); /* synchronous reset */
/* disable protection of misc out and other regs */
outb(addr_6845, CRTC_MTEST);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_MTEST);
outb(addr_6845+1, byte & ~0x50);
/* enable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte & 0x7f);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
sp = savearea.tri9000;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x03); /* Horizontal Blank End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13);
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */
outb(TS_DATA, 0x00); /* write ANYTHING switches to OLD */
outb(TS_INDEX, TS_MODEC2);
*sp++ = inb(TS_DATA);
outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */
inb(TS_DATA); /* read switches to NEW */
outb(TS_INDEX, TS_MODEC2);
*sp++ = inb(TS_DATA);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
*sp++ = inb(GN_MISCOUTR); /* Misc output register */
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, 0x9b);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, 0x83);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, 0x84);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, 0x1e);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, 0x87);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, 0x1a);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, 0x01); /* 8 dot char clock */
outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */
outb(TS_DATA, 0x00); /* write ANYTHING switches to OLD */
outb(TS_INDEX, TS_MODEC2);
outb(TS_DATA, 0x00);
outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */
inb(TS_DATA); /* read switches to NEW */
outb(TS_INDEX, TS_MODEC2);
outb(TS_DATA, 0x01);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */
outb(ATC_DATAW, 0x08); /* Line graphics disable */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */
outb(ATC_DATAW, 0x00);
outb(GN_MISCOUTW, (inb(GN_MISCOUTR) | 0x0c)); /* Misc output register */
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x03); /* clear synchronous reset */
vga_screen_on();
return(0);
}
sp = savearea.tri9000;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, *sp++);
outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */
outb(TS_DATA, 0x00); /* write ANYTHING switches to OLD */
outb(TS_INDEX, TS_MODEC2);/* Timing Sequencer */
outb(TS_DATA, *sp++);
outb(TS_INDEX, TS_HWVERS);/* Hardware Version register */
inb(TS_DATA); /* read switches to NEW */
outb(TS_INDEX, TS_MODEC2);/* Timing Sequencer */
outb(TS_DATA, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
}
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x03); /* clear synchronous reset */
vga_screen_on();
return(1);
}
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for Video7 VGA 1024i
*---------------------------------------------------------------------------*/
int
v7_1024i_col(int cols)
{
u_char *sp;
u_char byte;
u_char save__byte;
vga_screen_off();
/* enable access to first 7 CRTC registers */
/* first, enable read access to vertical retrace start/end */
outb(addr_6845, CRTC_HBLANKE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_HBLANKE);
outb(addr_6845+1, (byte | 0x80));
/* second, enable access to protected registers */
outb(addr_6845, CRTC_VSYNCE);
save__byte = byte = inb(addr_6845+1);
byte |= 0x20; /* no irq 2 */
byte &= 0x6f; /* wr enable, clr irq flag */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
outb(TS_INDEX, TS_EXTCNTL); /* enable extensions */
outb(TS_DATA, 0xea);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
sp = savearea.v7_1024i;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x03); /* Horizontal Blank End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13); /* Row Offset Register */
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
outb(TS_INDEX, 0x83);
*sp++ = inb(TS_DATA);
outb(TS_INDEX, 0xa4);
*sp++ = inb(TS_DATA);
outb(TS_INDEX, 0xe0);
*sp++ = inb(TS_DATA);
outb(TS_INDEX, 0xe4);
*sp++ = inb(TS_DATA);
outb(TS_INDEX, 0xf8);
*sp++ = inb(TS_DATA);
outb(TS_INDEX, 0xfd);
*sp++ = inb(TS_DATA);
*sp++ = inb(GN_MISCOUTR); /* Misc output register */
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, 0x9c);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, 0x83);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, 0x86);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, 0x9e);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, 0x89);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, 0x1c);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, 0x01); /* 8 dot char clock */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */
outb(ATC_DATAW, 0x08); /* Line graphics disable */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */
outb(ATC_DATAW, 0x00);
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x01); /* synchronous reset */
outb(TS_INDEX, 0x83);
outb(TS_DATA, 0xa0);
outb(TS_INDEX, 0xa4);
outb(TS_DATA, 0x1c);
outb(TS_INDEX, 0xe0);
outb(TS_DATA, 0x00);
outb(TS_INDEX, 0xe4);
outb(TS_DATA, 0xfe);
outb(TS_INDEX, 0xf8);
outb(TS_DATA, 0x1b);
outb(TS_INDEX, 0xfd);
outb(TS_DATA, 0x33);
byte = inb(GN_MISCOUTR);
byte |= 0x0c;
outb(GN_MISCOUTW, byte); /* Misc output register */
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x03); /* clear synchronous reset */
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */
outb(TS_DATA, 0xae);
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
vga_screen_on();
return(0);
}
sp = savearea.v7_1024i;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x01); /* synchronous reset */
outb(TS_INDEX, 0x83);
outb(TS_DATA, *sp++);
outb(TS_INDEX, 0xa4);
outb(TS_DATA, *sp++);
outb(TS_INDEX, 0xe0);
outb(TS_DATA, *sp++);
outb(TS_INDEX, 0xe4);
outb(TS_DATA, *sp++);
outb(TS_INDEX, 0xf8);
outb(TS_DATA, *sp++);
outb(TS_INDEX, 0xfd);
outb(TS_DATA, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
outb(TS_INDEX, TS_SYNCRESET);
outb(TS_DATA, 0x03); /* clear synchronous reset */
}
outb(TS_INDEX, TS_EXTCNTL); /* disable extensions */
outb(TS_DATA, 0xae);
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, save__byte);
vga_screen_on();
return(1);
}
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for S3 86C928 based boards
*---------------------------------------------------------------------------*/
int
s3_928_col(int cols)
{
u_char *sp;
u_char byte;
vga_screen_off();
outb(addr_6845, 0x38);
outb(addr_6845+1, 0x48); /* unlock registers */
outb(addr_6845, 0x39);
outb(addr_6845+1, 0xa0); /* unlock registers */
/* enable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte & 0x7f);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
sp = savearea.s3_928;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x03); /* Horizontal Blank End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13); /* Row Offset Register */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x34); /* Backward Compat 3 Reg */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x3b); /* Data Xfer Exec Position */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x42); /* (Clock) Mode Control */
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
*sp++ = inb(GN_MISCOUTR); /* Misc output register */
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, 0x9a);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, 0x83);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, 0x86);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, 0x9d);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, 0x87);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, 0x1b);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
outb(addr_6845, 0x34);
outb(addr_6845+1, 0x10);/* enable data xfer pos control */
outb(addr_6845, 0x3b);
outb(addr_6845+1, 0x90);/* set data xfer pos value */
outb(addr_6845, 0x42); /* (Clock) Mode Control */
outb(addr_6845+1, 0x02);/* Select 40MHz Clock */
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, 0x01); /* 8 dot char clock */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */
outb(ATC_DATAW, 0x08); /* Line graphics disable */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */
outb(ATC_DATAW, 0x00);
/* Misc output register */
outb(GN_MISCOUTW, (inb(GN_MISCOUTR) | 0x0c));
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
outb(addr_6845, 0x38);
outb(addr_6845+1, 0x00); /* lock registers */
outb(addr_6845, 0x39);
outb(addr_6845+1, 0x00); /* lock registers */
vga_screen_on();
return(0);
}
sp = savearea.s3_928;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x34);
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x3b);
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x42); /* Mode control */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
}
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
outb(addr_6845, 0x38);
outb(addr_6845+1, 0x00); /* lock registers */
outb(addr_6845, 0x39);
outb(addr_6845+1, 0x00); /* lock registers */
vga_screen_on();
return(1);
}
/*---------------------------------------------------------------------------*
* toggle 80/132 column operation for Cirrus Logic 542x based boards
*---------------------------------------------------------------------------*/
int
cl_gd542x_col(int cols)
{
u_char *sp;
u_char byte;
vga_screen_off();
/* enable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
byte = inb(addr_6845+1);
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte & 0x7f);
/* enable access to cirrus extension registers */
outb(TS_INDEX, 6);
outb(TS_DATA, 0x12);
if(cols == SCR_COL132) /* switch 80 -> 132 */
{
/* save state of board for 80 columns */
if(!regsaved)
{
regsaved = 1;
sp = savearea.cirrus;
outb(addr_6845, 0x00); /* Horizontal Total */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x01); /* Horizontal Display End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x03); /* Horizontal Blank End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
*sp++ = inb(addr_6845+1);
outb(addr_6845, 0x13); /* Row Offset Register */
*sp++ = inb(addr_6845+1);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
*sp++ = inb(TS_DATA);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
*sp++ = inb(ATC_DATAR);
/* VCLK2 Numerator Register */
outb(TS_INDEX, 0xd);
*sp++ = inb(TS_DATA);
/* VCLK2 Denominator and Post-Scalar Value Register */
outb(TS_INDEX, 0x1d);
*sp++ = inb(TS_DATA);
/* Misc output register */
*sp++ = inb(GN_MISCOUTR);
}
/* setup chipset for 132 column operation */
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, 0x9f);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, 0x83);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, 0x84);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, 0x82);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, 0x8a);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, 0x9e);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, 0x42);
/* set VCLK2 to 41.164 MHz ..... */
outb(TS_INDEX, 0xd); /* VCLK2 Numerator Register */
outb(TS_DATA, 0x45);
outb(TS_INDEX, 0x1d); /* VCLK2 Denominator and */
outb(TS_DATA, 0x30); /* Post-Scalar Value Register */
/* and use it. */
outb(GN_MISCOUTW, (inb(GN_MISCOUTR) & ~0x0c) | (2 << 2));
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, 0x01); /* 8 dot char clock */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS); /* ATC Mode control */
outb(ATC_DATAW, 0x08); /* Line graphics disable */
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS); /* ATC Horizontal Pixel Panning */
outb(ATC_DATAW, 0x00);
}
else /* switch 132 -> 80 */
{
if(!regsaved) /* failsafe */
{
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
/* disable access to cirrus extension registers */
outb(TS_INDEX, 6);
outb(TS_DATA, 0);
vga_screen_on();
return(0);
}
sp = savearea.cirrus;
outb(addr_6845, 0x00); /* Horizontal Total */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x01); /* Horizontal Display End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x02); /* Horizontal Blank Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x03); /* Horizontal Blank End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x04); /* Horizontal Retrace Start */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x05); /* Horizontal Retrace End */
outb(addr_6845+1, *sp++);
outb(addr_6845, 0x13); /* Row Offset Register */
outb(addr_6845+1, *sp++);
outb(TS_INDEX, TS_MODE);/* Timing Sequencer */
outb(TS_DATA, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Mode control */
outb(ATC_INDEX, ATC_MODE | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
if(color)
inb(GN_INPSTAT1C);
else
inb(GN_INPSTAT1M);
/* ATC Horizontal Pixel Panning */
outb(ATC_INDEX, ATC_HORPIXPAN | ATC_ACCESS);
outb(ATC_DATAW, *sp++);
/* VCLK2 Numerator Register */
outb(TS_INDEX, 0xd);
outb(TS_DATA, *sp++);
/* VCLK2 Denominator and Post-Scalar Value Register */
outb(TS_INDEX, 0x1d);
outb(TS_DATA, *sp++);
outb(GN_MISCOUTW, *sp++); /* Misc output register */
}
/* disable access to cirrus extension registers */
outb(TS_INDEX, 6);
outb(TS_DATA, 0);
/* disable access to first 7 CRTC registers */
outb(addr_6845, CRTC_VSYNCE);
outb(addr_6845+1, byte);
vga_screen_on();
return(1);
}
#if PCVT_USL_VT_COMPAT
/*---------------------------------------------------------------------------*
* switch screen from text mode to X-mode and vice versa
*---------------------------------------------------------------------------*/
void
switch_screen(int n, int oldgrafx, int newgrafx)
{
#if PCVT_SCREENSAVER
static unsigned saved_scrnsv_tmo = 0;
#endif /* PCVT_SCREENSAVER */
#if !PCVT_KBD_FIFO
int x;
#endif /* !PCVT_KBD_FIFO */
int cols = vsp->maxcol; /* get current col val */
if(n < 0 || n >= totalscreens)
return;
#if !PCVT_KBD_FIFO
x = spltty(); /* protect us */
#endif /* !PCVT_KBD_FIFO */
if(!oldgrafx && newgrafx)
{
/* switch from text to graphics */
#if PCVT_SCREENSAVER
if((saved_scrnsv_tmo = scrnsv_timeout))
pcvt_set_scrnsv_tmo(0); /* screensaver off */
#endif /* PCVT_SCREENSAVER */
async_update(UPDATE_STOP); /* status display off */
}
if(!oldgrafx)
{
/* switch from text mode */
/* video board memory -> kernel memory */
bcopy(vsp->Crtat, vsp->Memory,
vsp->screen_rows * vsp->maxcol * CHR);
vsp->Crtat = vsp->Memory; /* operate in memory now */
}
/* update global screen pointers/variables */
current_video_screen = n; /* current screen no */
#if !PCVT_NETBSD && !(PCVT_FREEBSD > 110 && PCVT_FREEBSD < 200)
pcconsp = &pccons[n]; /* current tty */
#elif PCVT_FREEBSD > 110 && PCVT_FREEBSD < 200
pcconsp = pccons[n]; /* current tty */
#else
pcconsp = pc_tty[n]; /* current tty */
#endif
vsp = &vs[n]; /* current video state ptr */
if(oldgrafx && !newgrafx)
{
/* switch from graphics to text mode */
unsigned i;
/* restore fonts */
for(i = 0; i < totalfonts; i++)
if(saved_charsets[i])
vga_move_charset(i, 0, 0);
#if PCVT_SCREENSAVER
/* activate screen saver */
if(saved_scrnsv_tmo)
pcvt_set_scrnsv_tmo(saved_scrnsv_tmo);
#endif /* PCVT_SCREENSAVER */
/* re-initialize lost MDA information */
if(adaptor_type == MDA_ADAPTOR)
{
/*
* Due to the fact that HGC registers are write-only,
* the Xserver can only make guesses about the state
* the HGC adaptor has been before turning on X mode.
* Thus, the display must be re-enabled now, and the
* cursor shape and location restored.
*/
outb(GN_DMCNTLM, 0x28); /* enable display, text mode */
outb(addr_6845, CRTC_CURSORH); /* select high register */
outb(addr_6845+1,
((vsp->Crtat + vsp->cur_offset) - Crtat) >> 8);
outb(addr_6845, CRTC_CURSORL); /* select low register */
outb(addr_6845+1,
((vsp->Crtat + vsp->cur_offset) - Crtat));
outb(addr_6845, CRTC_CURSTART); /* select high register */
outb(addr_6845+1, vsp->cursor_start);
outb(addr_6845, CRTC_CUREND); /* select low register */
outb(addr_6845+1, vsp->cursor_end);
}
/* make status display happy */
async_update(UPDATE_START);
}
if(!newgrafx)
{
/* to text mode */
/* kernel memory -> video board memory */
bcopy(vsp->Crtat, Crtat,
vsp->screen_rows * vsp->maxcol * CHR);
vsp->Crtat = Crtat; /* operate on screen now */
outb(addr_6845, CRTC_STARTADRH);
outb(addr_6845+1, 0);
outb(addr_6845, CRTC_STARTADRL);
outb(addr_6845+1, 0);
}
#if !PCVT_KBD_FIFO
splx(x);
#endif /* !PCVT_KBD_FIFO */
select_vga_charset(vsp->vga_charset);
if(vsp->maxcol != cols)
vga_col(vsp, vsp->maxcol); /* select 80/132 columns */
outb(addr_6845, CRTC_CURSORH); /* select high register */
outb(addr_6845+1, vsp->cur_offset >> 8);
outb(addr_6845, CRTC_CURSORL); /* select low register */
outb(addr_6845+1, vsp->cur_offset);
if(vsp->cursor_on)
{
outb(addr_6845, CRTC_CURSTART); /* select high register */
outb(addr_6845+1, vsp->cursor_start);
outb(addr_6845, CRTC_CUREND); /* select low register */
outb(addr_6845+1, vsp->cursor_end);
}
else
{
sw_cursor(0);
}
if(adaptor_type == VGA_ADAPTOR)
{
unsigned i;
/* switch VGA DAC palette entries */
for(i = 0; i < NVGAPEL; i++)
vgapaletteio(i, &vsp->palette[i], 1);
}
if(!newgrafx)
{
update_led(); /* update led's */
update_hp(vsp); /* update fkey labels, if present */
/* if we switch to a vt with force 24 lines mode and */
/* pure VT emulation and 25 rows charset, then we have */
/* to clear the last line on display ... */
if(vsp->force24 && (vsp->vt_pure_mode == M_PUREVT) &&
(vgacs[vsp->vga_charset].screen_size == SIZ_25ROWS))
{
fillw(' ', vsp->Crtat + vsp->screen_rows * vsp->maxcol,
vsp->maxcol);
}
}
}
/*---------------------------------------------------------------------------*
* Change specified vt to VT_AUTO mode
* xxx Maybe this should also reset VT_GRAFX mode; since switching and
* graphics modes are not going to work without VT_PROCESS mode.
*---------------------------------------------------------------------------*/
static void
set_auto_mode (struct video_state *vsx)
{
unsigned ostatus = vsx->vt_status;
vsx->smode.mode = VT_AUTO;
vsx->proc = NULL;
vsx->pid = 0;
vsx->vt_status &= ~(VT_WAIT_REL|VT_WAIT_ACK);
if (ostatus & VT_WAIT_ACK) {
#if 0
assert (!(ostatus&VT_WAIT_REL));
assert (vsp == vsx &&
vt_switch_pending == current_video_screen + 1);
vt_switch_pending = 0;
#else
if (vsp == vsx &&
vt_switch_pending == current_video_screen + 1)
vt_switch_pending = 0;
#endif
}
if (ostatus&VT_WAIT_REL) {
int new_screen = vt_switch_pending - 1;
#if 0
assert(vsp == vsx && vt_switch_pending);
vt_switch_pending = 0;
vgapage (new_screen);
#else
if (vsp == vsx && vt_switch_pending) {
vt_switch_pending = 0;
vgapage (new_screen);
}
#endif
}
}
/*---------------------------------------------------------------------------*
* Exported function; to be called when a vt is closed down.
*
* Ideally, we would like to be able to recover from an X server crash;
* but in reality, if the server crashes hard while in control of the
* vga board, then you're not likely to be able to use pcvt ttys
* without rebooting.
*---------------------------------------------------------------------------*/
void
reset_usl_modes (struct video_state *vsx)
{
/* Clear graphics mode */
if (vsx->vt_status & VT_GRAFX) {
vsx->vt_status &= ~VT_GRAFX;
if (vsp == vsx)
switch_screen(current_video_screen, 1, 0);
}
/* Take kbd out of raw mode */
if (pcvt_kbd_raw && vsp == vsx) {
#if PCVT_SCANSET > 1
kbd_emulate_pc(0);
#endif /* PCVT_SCANSET > 1 */
pcvt_kbd_raw = 0;
}
/* Clear process controlled mode */
set_auto_mode (vsx);
}
/*---------------------------------------------------------------------------*
* switch to virtual screen n (0 ... PCVT_NSCREENS-1), VT_USL version
* (the name vgapage() stands for historical reasons)
*---------------------------------------------------------------------------*/
int
vgapage(int new_screen)
{
int x;
if(new_screen < 0 || new_screen >= totalscreens)
return EINVAL;
/* fallback to VT_AUTO if controlling processes died */
if(vsp->proc && vsp->proc != pfind(vsp->pid))
set_auto_mode(vsp);
if(vs[new_screen].proc
&& vs[new_screen].proc != pfind(vs[new_screen].pid))
set_auto_mode(&vs[new_screen]);
if (!vt_switch_pending && new_screen == current_video_screen)
return 0;
if(vt_switch_pending && vt_switch_pending != new_screen + 1) {
/* Try resignaling uncooperative X-window servers */
if (vsp->smode.mode == VT_PROCESS) {
if (vsp->vt_status & VT_WAIT_REL) {
if(vsp->smode.relsig)
psignal(vsp->proc, vsp->smode.relsig);
} else if (vsp->vt_status & VT_WAIT_ACK) {
if(vsp->smode.acqsig)
psignal(vsp->proc, vsp->smode.acqsig);
}
}
return EAGAIN;
}
vt_switch_pending = new_screen + 1;
if(vsp->smode.mode == VT_PROCESS)
{
/* we cannot switch immediately here */
vsp->vt_status |= VT_WAIT_REL;
if(vsp->smode.relsig)
psignal(vsp->proc, vsp->smode.relsig);
}
else
{
struct video_state *old_vsp = vsp;
switch_screen(new_screen,
vsp->vt_status & VT_GRAFX,
vs[new_screen].vt_status & VT_GRAFX);
x = spltty();
if(old_vsp->vt_status & VT_WAIT_ACT)
{
old_vsp->vt_status &= ~VT_WAIT_ACT;
wakeup((caddr_t)&old_vsp->smode);
}
if(vsp->vt_status & VT_WAIT_ACT)
{
vsp->vt_status &= ~VT_WAIT_ACT;
wakeup((caddr_t)&vsp->smode);
}
splx(x);
if(vsp->smode.mode == VT_PROCESS)
{
/* if _new_ vt is under process control... */
vsp->vt_status |= VT_WAIT_ACK;
if(vsp->smode.acqsig)
psignal(vsp->proc, vsp->smode.acqsig);
}
else
{
/* we are committed */
vt_switch_pending = 0;
#if PCVT_FREEBSD > 206
/*
* XXX: If pcvt is acting as the systems console,
* avoid panics going to the debugger while we are in
* process mode.
*/
if(pcvt_is_console)
cons_unavail = 0;
#endif
}
}
return 0;
}
/*---------------------------------------------------------------------------*
* ioctl handling for VT_USL mode
*---------------------------------------------------------------------------*/
int
usl_vt_ioctl(Dev_t dev, int cmd, caddr_t data, int flag, struct proc *p)
{
int i, j, error, opri;
struct vt_mode newmode;
switch(cmd)
{
case VT_SETMODE:
newmode = *(struct vt_mode *)data;
opri = spltty();
if (newmode.mode != VT_PROCESS) {
struct video_state *vsx = &vs[minor(dev)];
if (vsx->smode.mode == VT_PROCESS) {
if (vsx->proc != p) {
splx(opri);
return EPERM;
}
set_auto_mode(vsx);
}
splx(opri);
return 0;
}
/*
* NB: XFree86-3.1.1 does the following:
* VT_ACTIVATE (vtnum)
* VT_WAITACTIVE (vtnum)
* VT_SETMODE (VT_PROCESS)
* So it is possible that the screen was switched
* between the WAITACTIVE and the SETMODE (here). This
* can actually happen quite frequently, and it was
* leading to dire consequences. Now it is detected by
* requiring that minor(dev) match current_video_screen.
* An alternative would be to operate on vs[minor(dev)]
* instead of *vsp, but that would leave the server
* confused, because it would believe that its vt was
* currently activated.
*/
if (minor(dev) != current_video_screen) {
splx(opri);
return EPERM;
}
/* Check for server died */
if(vsp->proc && vsp->proc != pfind(vsp->pid))
set_auto_mode(vsp);
/* Check for server already running */
if (vsp->smode.mode == VT_PROCESS && vsp->proc != p)
{
splx(opri);
return EBUSY; /* already in use on this VT */
}
vsp->smode = newmode;
vsp->proc = p;
vsp->pid = p->p_pid;
#if PCVT_FREEBSD > 206
/*
* XXX: If pcvt is acting as the systems console,
* avoid panics going to the debugger while we are in
* process mode.
*/
if(pcvt_is_console)
cons_unavail = (newmode.mode == VT_PROCESS);
#endif
splx(opri);
return 0;
case VT_GETMODE:
*(struct vt_mode *)data = vsp->smode;
return 0;
case VT_RELDISP:
if (minor(dev) != current_video_screen)
return EPERM;
if (vsp->smode.mode != VT_PROCESS)
return EINVAL;
if (vsp->proc != p)
return EPERM;
switch(*(int *)data) {
case VT_FALSE:
/* process refuses to release screen; abort */
if(vt_switch_pending
&& (vsp->vt_status & VT_WAIT_REL)) {
vsp->vt_status &= ~VT_WAIT_REL;
vt_switch_pending = 0;
return 0;
}
break;
case VT_TRUE:
/* process releases its VT */
if(vt_switch_pending
&& (vsp->vt_status & VT_WAIT_REL)) {
int new_screen = vt_switch_pending - 1;
struct video_state *old_vsp = vsp;
vsp->vt_status &= ~VT_WAIT_REL;
switch_screen(new_screen,
vsp->vt_status & VT_GRAFX,
vs[new_screen].vt_status
& VT_GRAFX);
opri = spltty();
if(old_vsp->vt_status & VT_WAIT_ACT)
{
old_vsp->vt_status &= ~VT_WAIT_ACT;
wakeup((caddr_t)&old_vsp->smode);
}
if(vsp->vt_status & VT_WAIT_ACT)
{
vsp->vt_status &= ~VT_WAIT_ACT;
wakeup((caddr_t)&vsp->smode);
}
splx(opri);
if(vsp->smode.mode == VT_PROCESS) {
/*
* if the new vt is also in process
* mode, we have to wait until its
* controlling process acknowledged
* the switch
*/
vsp->vt_status
|= VT_WAIT_ACK;
if(vsp->smode.acqsig)
psignal(vsp->proc,
vsp->smode.acqsig);
}
else
{
/* we are committed */
vt_switch_pending = 0;
#if PCVT_FREEBSD > 206
/* XXX */
if(pcvt_is_console)
cons_unavail = 0;
#endif
return 0;
}
}
break;
case VT_ACKACQ:
/* new vts controlling process acknowledged */
if(vsp->vt_status & VT_WAIT_ACK) {
vt_switch_pending = 0;
vsp->vt_status &= ~VT_WAIT_ACK;
#if PCVT_FREEBSD > 206
/* XXX */
if(pcvt_is_console)
cons_unavail = 1;
#endif
return 0;
}
break;
}
return EINVAL; /* end case VT_RELDISP */
case VT_OPENQRY:
/* return free vt */
for(i = 0; i < PCVT_NSCREENS; i++)
if(!vs[i].openf) {
*(int *)data = i + 1;
return 0;
}
return EAGAIN;
case VT_GETACTIVE:
*(int *)data = current_video_screen + 1;
return 0;
case VT_ACTIVATE:
return vgapage(*(int *)data - 1);
case VT_WAITACTIVE:
/* sleep until vt switch happened */
i = *(int *)data - 1;
if(i != -1
&& (i < 0 || i >= PCVT_NSCREENS))
return EINVAL;
if(i != -1 && current_video_screen == i)
return 0;
if(i == -1)
{
/* xxx Is this what it is supposed to do? */
int x = spltty();
i = current_video_screen;
error = 0;
while (current_video_screen == i &&
(error == 0 || error == ERESTART)) {
vs[i].vt_status |= VT_WAIT_ACT;
error = tsleep((caddr_t)&vs[i].smode,
PZERO | PCATCH, "waitvt", 0);
}
splx(x);
}
else
{
int x = spltty();
error = 0;
while (current_video_screen != i &&
(error == 0 || error == ERESTART))
{
vs[i].vt_status |= VT_WAIT_ACT;
error = tsleep((caddr_t)&vs[i].smode,
PZERO | PCATCH, "waitvt", 0);
}
splx(x);
}
return error;
case KDENABIO:
/* grant the process IO access; only allowed if euid == 0 */
{
#if PCVT_NETBSD > 9 || PCVT_FREEBSD >= 200
struct trapframe *fp = (struct trapframe *)p->p_md.md_regs;
#elif PCVT_NETBSD || (PCVT_FREEBSD && PCVT_FREEBSD > 102)
struct trapframe *fp = (struct trapframe *)p->p_regs;
#else
struct syscframe *fp = (struct syscframe *)p->p_regs;
#endif
if(suser(p->p_ucred, &p->p_acflag) != 0)
return (EPERM);
#if PCVT_NETBSD || (PCVT_FREEBSD && PCVT_FREEBSD > 102)
fp->tf_eflags |= PSL_IOPL;
#else
fp->sf_eflags |= PSL_IOPL;
#endif
return 0;
}
case KDDISABIO:
/* abandon IO access permission */
{
#if PCVT_NETBSD > 9 || PCVT_FREEBSD >= 200
struct trapframe *fp = (struct trapframe *)p->p_md.md_regs;
fp->tf_eflags &= ~PSL_IOPL;
#elif PCVT_NETBSD || (PCVT_FREEBSD && PCVT_FREEBSD > 102)
struct trapframe *fp = (struct trapframe *)p->p_regs;
fp->tf_eflags &= ~PSL_IOPL;
#else
struct syscframe *fp = (struct syscframe *)p->p_regs;
fp->sf_eflags &= ~PSL_IOPL;
#endif
return 0;
}
case KDSETMODE:
{
struct video_state *vsx = &vs[minor(dev)];
int haschanged = 0;
if(adaptor_type != VGA_ADAPTOR
&& adaptor_type != MDA_ADAPTOR)
/* X will only run on those adaptors */
return (EINVAL);
/* set text/graphics mode of current vt */
switch(*(int *)data)
{
case KD_TEXT:
haschanged = (vsx->vt_status & VT_GRAFX) != 0;
vsx->vt_status &= ~VT_GRAFX;
if(haschanged && vsx == vsp)
switch_screen(current_video_screen, 1, 0);
return 0;
case KD_GRAPHICS:
/* xxx It might be a good idea to require that
the vt be in process controlled mode here,
and that the calling process is the owner */
haschanged = (vsx->vt_status & VT_GRAFX) == 0;
vsx->vt_status |= VT_GRAFX;
if(haschanged && vsx == vsp)
switch_screen(current_video_screen, 0, 1);
return 0;
}
return EINVAL; /* end case KDSETMODE */
}
case KDSETRAD:
/* set keyboard repeat and delay */
return kbdioctl(dev, KBDSTPMAT, data, flag);
case KDSKBMODE:
switch(*(int *)data)
{
case K_RAW:
#if PCVT_SCANSET > 1
/* put keyboard to return ancient PC scan codes */
kbd_emulate_pc(1);
#endif /* PCVT_SCANSET > 1 */
pcvt_kbd_raw = 1;
shift_down = meta_down = altgr_down = ctrl_down = 0;
return 0;
case K_XLATE:
#if PCVT_SCANSET > 1
kbd_emulate_pc(0);
#endif /* PCVT_SCANSET > 1 */
pcvt_kbd_raw = 0;
return 0;
}
return EINVAL; /* end KDSKBMODE */
case KDMKTONE:
/* ring the speaker */
if(data)
{
int duration = *(int *)data >> 16;
int pitch = *(int *)data & 0xffff;
#if PCVT_NETBSD
if(pitch != 0)
{
sysbeep(PCVT_SYSBEEPF / pitch,
duration * hz / 1000);
}
#else /* PCVT_NETBSD */
sysbeep(pitch, duration * hz / 3000);
#endif /* PCVT_NETBSD */
}
else
{
sysbeep(PCVT_SYSBEEPF / 1493, hz / 4);
}
return 0;
case KDSETLED:
/* set kbd LED status */
/* unfortunately, the LED definitions between pcvt and */
/* USL differ some way :-( */
i = *(int *)data;
j = (i & LED_CAP? KBD_CAPSLOCK: 0)
+ (i & LED_NUM? KBD_NUMLOCK: 0)
+ (i & LED_SCR? KBD_SCROLLLOCK: 0);
return kbdioctl(dev, KBDSLOCK, (caddr_t)&j, flag);
case KDGETLED:
/* get kbd LED status */
if((error = kbdioctl(dev, KBDGLOCK, (caddr_t)&j, flag)))
return error;
i = (j & KBD_CAPSLOCK? LED_CAP: 0)
+ (j & KBD_NUMLOCK? LED_NUM: 0)
+ (j & KBD_SCROLLLOCK? LED_SCR: 0);
*(int *)data = i;
return 0;
case GIO_KEYMAP:
get_usl_keymap((keymap_t *)data);
return 0;
} /* end case cmd */
return -1; /* inappropriate usl_vt_compat ioctl */
}
#endif /* PCVT_USL_VT_COMPAT */
#endif /* NVT > 0 */
/* ------------------------- E O F ------------------------------------------*/
Reference in New Issue View Git Blame Copy Permalink