1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
freebsd/sys/dev/fb/machfb.c
Marius Strobl 0a710885bd Add machfb(4), a driver for ATI Mach64 graphics chips intended for
use with syscons(4) on sparc64. It's based on the respective NetBSD
driver with some additional info (initialisation/hardware cursor)
obtained from the Xorg 'ati' driver and some ideas taken from
creator(4). ATI Mach64 chips ("ATI Rage") are quite common as low-
end graphics chips in PCI-based sun4u machines and are used on-board
in e.g. Blade 100 and a couple of OEM products. Most if not all of
the Sun PGX add-on cards family (descriptions of the PGX32 are
conflicting but most say it's a Rage Pro) are also based on these
chips. Depending on the version of the OBP Mach64 cards destined for
use in i386 machines also work in sun4u machines.
The driver uses pixel mode with hardware acceleration as far as
syscons(4) currently permits on sparc64 so text mode is already
quite fast. The hardware cursor is used for the mouse pointer;
for one because this is a "restriction" induced in syscons(4) on
sparc64 by creator(4) and also because of issues with mapping
the aperture when used as a low-level early during boot. Due to
insufficiencies in the available documentation I didn't manage to
get mode switch work properly (sync problems), yet. So for now
this driver relies on the OBP having initialised a mode (as does
creator(4)). On all of the tested machines is even true when using
a serial console (and also not only when the OBP switched to a
serial console because no keyboard is present). In general however
the states the Mach64 chips are left in by the OBP vary a lot
depending on the version of the OBP. This e.g. includes the aperture
not being mapped in even when used as the console and the OBP just
barfing when asked to map it. The latter is also the reason for the
existence of this native driver in FreeBSD rather than taking an
OFW frambuffer approach.
Xorg is also happy to talk to these chips by mmap'ing them through
this driver. For some hardware configs like on the Blade 100 a fix
for the Xorg sparc64 MD bus code is however needed (added in version
6.8.2_2 of the xorg-server port).
The video driver font loading and saving methods are not implemented,
yet, as syscons(4) needs more work in that area to work viable on
sparc64.
With minor modifications machfb(4) would most likely also work on
powerpc, when #ifdef'ing the OFW and possibly implementing mode
setting probably also on the other archs. The latter is however
not very practible at the moment as it would conflict with vga(4).

Tested/developed with:	Rage II+ add-on card on AX1105 and AXi board,
			AXe board (on-board Rage Pro)
Additional testing by:	marcel (Ultra 5 w/ on-board Rage Pro),
			scottl (Naturetech GENIALstation 777S w/ on-board
			Rage Mobility M1),
			Michiel Boland and Ilmar S. Habibulin (Blade 100
			w/ on-board Rage XL)
2005-05-21 20:47:38 +00:00

1491 lines
40 KiB
C

/*-
* Copyright (c) 2002 Bang Jun-Young
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* from: NetBSD: machfb.c,v 1.23 2005/03/07 21:45:24 martin Exp
*/
/*-
* Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for ATI Mach64 graphics chips. Some code is derived from the
* ATI Rage Pro and Derivatives Programmer's Guide.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/consio.h>
#include <sys/eventhandler.h>
#include <sys/fbio.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/resource.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/bus_private.h>
#include <machine/ofw_machdep.h>
#include <machine/resource.h>
#include <machine/sc_machdep.h>
#include <sys/rman.h>
#include <dev/fb/fbreg.h>
#include <dev/fb/gallant12x22.h>
#include <dev/fb/machfbreg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/syscons/syscons.h>
/* #define MACHFB_DEBUG */
#define MACHFB_DRIVER_NAME "machfb"
#define MACH64_REG_OFF 0x7ffc00
#define MACH64_REG_SIZE 1024
struct machfb_softc {
video_adapter_t sc_va; /* must be first */
phandle_t sc_node;
uint16_t sc_chip_id;
uint8_t sc_chip_rev;
int sc_memrid;
int sc_viorid;
int sc_vmemrid;
struct resource *sc_memres;
struct resource *sc_viores;
struct resource *sc_vmemres;
bus_space_tag_t sc_memt;
bus_space_tag_t sc_regt;
bus_space_tag_t sc_viot;
bus_space_tag_t sc_vmemt;
bus_space_handle_t sc_memh;
bus_space_handle_t sc_regh;
bus_space_handle_t sc_vioh;
bus_space_handle_t sc_vmemh;
int sc_height;
int sc_width;
int sc_depth;
int sc_xmargin;
int sc_ymargin;
size_t sc_memsize;
int sc_memtype;
int sc_mem_freq;
int sc_ramdac_freq;
int sc_ref_freq;
int sc_ref_div;
int sc_mclk_post_div;
int sc_mclk_fb_div;
int sc_dacw;
uint8_t sc_cmap_red[256];
uint8_t sc_cmap_green[256];
uint8_t sc_cmap_blue[256];
u_char *sc_font;
int sc_cbwidth;
vm_offset_t sc_curoff;
int sc_draw_cache;
#define MACHFB_DRAW_CHAR (1 << 0)
#define MACHFB_DRAW_FILLRECT (1 << 1)
int sc_flags;
#define MACHFB_CONSOLE (1 << 0)
#define MACHFB_CUREN (1 << 1)
#define MACHFB_DSP (1 << 2)
};
static struct {
uint16_t chip_id;
const char *name;
uint32_t ramdac_freq;
} machfb_info[] = {
{ ATI_MACH64_CT, "ATI Mach64 CT", 135000 },
{ ATI_RAGE_PRO_AGP, "ATI 3D Rage Pro (AGP)", 230000 },
{ ATI_RAGE_PRO_AGP1X, "ATI 3D Rage Pro (AGP 1x)", 230000 },
{ ATI_RAGE_PRO_PCI_B, "ATI 3D Rage Pro Turbo", 230000 },
{ ATI_RAGE_XC_PCI66, "ATI Rage XL (PCI66)", 230000 },
{ ATI_RAGE_XL_AGP, "ATI Rage XL (AGP)", 230000 },
{ ATI_RAGE_XC_AGP, "ATI Rage XC (AGP)", 230000 },
{ ATI_RAGE_XL_PCI66, "Rage XL (PCI66)", 230000 },
{ ATI_RAGE_PRO_PCI_P, "ATI 3D Rage Pro", 230000 },
{ ATI_RAGE_PRO_PCI_L, "ATI 3D Rage Pro (limited 3D)", 230000 },
{ ATI_RAGE_XL_PCI, "ATI Rage XL", 230000 },
{ ATI_RAGE_XC_PCI, "ATI Rage XC", 230000 },
{ ATI_RAGE_II, "ATI 3D Rage I/II", 135000 },
{ ATI_RAGE_IIP, "ATI 3D Rage II+", 200000 },
{ ATI_RAGE_IIC_PCI, "ATI 3D Rage IIC", 230000 },
{ ATI_RAGE_IIC_AGP_B, "ATI 3D Rage IIC (AGP)", 230000 },
{ ATI_RAGE_IIC_AGP_P, "ATI 3D Rage IIC (AGP)", 230000 },
{ ATI_RAGE_LT_PRO_AGP, "ATI 3D Rage LT Pro (AGP 133MHz)", 230000 },
{ ATI_RAGE_MOB_M3_PCI, "ATI Rage Mobility M3", 230000 },
{ ATI_RAGE_MOB_M3_AGP, "ATI Rage Mobility M3 (AGP)", 230000 },
{ ATI_RAGE_LT, "ATI 3D Rage LT", 230000 },
{ ATI_RAGE_LT_PRO_PCI, "ATI 3D Rage LT Pro", 230000 },
{ ATI_RAGE_MOBILITY, "ATI Rage Mobility", 230000 },
{ ATI_RAGE_L_MOBILITY, "ATI Rage L Mobility", 230000 },
{ ATI_RAGE_LT_PRO, "ATI 3D Rage LT Pro", 230000 },
{ ATI_RAGE_LT_PRO2, "ATI 3D Rage LT Pro", 230000 },
{ ATI_RAGE_MOB_M1_PCI, "ATI Rage Mobility M1 (PCI)", 230000 },
{ ATI_RAGE_L_MOB_M1_PCI, "ATI Rage L Mobility (PCI)", 230000 },
{ ATI_MACH64_VT, "ATI Mach64 VT", 170000 },
{ ATI_MACH64_VTB, "ATI Mach64 VTB", 200000 },
{ ATI_MACH64_VT4, "ATI Mach64 VT4", 230000 }
};
static struct machfb_cmap {
uint8_t red;
uint8_t green;
uint8_t blue;
} machfb_default_cmap[16] = {
{0x00, 0x00, 0x00}, /* black */
{0x00, 0x00, 0xff}, /* blue */
{0x00, 0xff, 0x00}, /* green */
{0x00, 0xc0, 0xc0}, /* cyan */
{0xff, 0x00, 0x00}, /* red */
{0xc0, 0x00, 0xc0}, /* magenta */
{0xc0, 0xc0, 0x00}, /* brown */
{0xc0, 0xc0, 0xc0}, /* light grey */
{0x80, 0x80, 0x80}, /* dark grey */
{0x80, 0x80, 0xff}, /* light blue */
{0x80, 0xff, 0x80}, /* light green */
{0x80, 0xff, 0xff}, /* light cyan */
{0xff, 0x80, 0x80}, /* light red */
{0xff, 0x80, 0xff}, /* light magenta */
{0xff, 0xff, 0x80}, /* yellow */
{0xff, 0xff, 0xff} /* white */
};
static u_char machfb_mouse_pointer_bits[64][8] = {
{ 0x00, 0x00, }, /* ............ */
{ 0x80, 0x00, }, /* *........... */
{ 0xc0, 0x00, }, /* **.......... */
{ 0xe0, 0x00, }, /* ***......... */
{ 0xf0, 0x00, }, /* ****........ */
{ 0xf8, 0x00, }, /* *****....... */
{ 0xfc, 0x00, }, /* ******...... */
{ 0xfe, 0x00, }, /* *******..... */
{ 0xff, 0x00, }, /* ********.... */
{ 0xff, 0x80, }, /* *********... */
{ 0xfc, 0xc0, }, /* ******..**.. */
{ 0xdc, 0x00, }, /* **.***...... */
{ 0x8e, 0x00, }, /* *...***..... */
{ 0x0e, 0x00, }, /* ....***..... */
{ 0x07, 0x00, }, /* .....***.... */
{ 0x04, 0x00, }, /* .....*...... */
{ 0x00, 0x00, }, /* ............ */
{ 0x00, 0x00, }, /* ............ */
{ 0x00, 0x00, }, /* ............ */
{ 0x00, 0x00, }, /* ............ */
{ 0x00, 0x00, }, /* ............ */
{ 0x00, 0x00, }, /* ............ */
};
/*
* Lookup table to perform a bit-swap of the mouse pointer bits,
* map set bits to CUR_CLR0 and unset bits to transparent.
*/
static u_char machfb_mouse_pointer_lut[] = {
0xaa, 0x2a, 0x8a, 0x0a, 0xa2, 0x22, 0x82, 0x02,
0xa8, 0x28, 0x88, 0x08, 0xa0, 0x20, 0x80, 0x00
};
static char *machfb_memtype_names[] = {
"(N/A)", "DRAM", "EDO DRAM", "EDO DRAM", "SDRAM", "SGRAM", "WRAM",
"(unknown type)"
};
static struct machfb_softc machfb_softc;
static struct bus_space_tag machfb_bst_store[1];
static device_probe_t machfb_pci_probe;
static device_attach_t machfb_pci_attach;
static device_detach_t machfb_pci_detach;
static device_method_t machfb_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, machfb_pci_probe),
DEVMETHOD(device_attach, machfb_pci_attach),
DEVMETHOD(device_detach, machfb_pci_detach),
{ 0, 0 }
};
static driver_t machfb_pci_driver = {
MACHFB_DRIVER_NAME,
machfb_methods,
sizeof(struct machfb_softc),
};
static devclass_t machfb_devclass;
DRIVER_MODULE(machfb, pci, machfb_pci_driver, machfb_devclass, 0, 0);
MODULE_DEPEND(machfb, pci, 1, 1, 1);
static void machfb_cursor_enable(struct machfb_softc *, int);
static int machfb_cursor_install(struct machfb_softc *);
static int machfb_get_memsize(struct machfb_softc *);
static void machfb_reset_engine(struct machfb_softc *);
static void machfb_init_engine(struct machfb_softc *);
#if 0
static void machfb_adjust_frame(struct machfb_softc *, int, int);
#endif
static void machfb_putpalreg(struct machfb_softc *, uint8_t, uint8_t, uint8_t,
uint8_t);
static void machfb_shutdown_final(void *v);
static void machfb_shutdown_reset(void *v);
static int machfb_configure(int flags);
static vi_probe_t machfb_probe;
static vi_init_t machfb_init;
static vi_get_info_t machfb_get_info;
static vi_query_mode_t machfb_query_mode;
static vi_set_mode_t machfb_set_mode;
static vi_save_font_t machfb_save_font;
static vi_load_font_t machfb_load_font;
static vi_show_font_t machfb_show_font;
static vi_save_palette_t machfb_save_palette;
static vi_load_palette_t machfb_load_palette;
static vi_set_border_t machfb_set_border;
static vi_save_state_t machfb_save_state;
static vi_load_state_t machfb_load_state;
static vi_set_win_org_t machfb_set_win_org;
static vi_read_hw_cursor_t machfb_read_hw_cursor;
static vi_set_hw_cursor_t machfb_set_hw_cursor;
static vi_set_hw_cursor_shape_t machfb_set_hw_cursor_shape;
static vi_blank_display_t machfb_blank_display;
static vi_mmap_t machfb_mmap;
static vi_ioctl_t machfb_ioctl;
static vi_clear_t machfb_clear;
static vi_fill_rect_t machfb_fill_rect;
static vi_bitblt_t machfb_bitblt;
static vi_diag_t machfb_diag;
static vi_save_cursor_palette_t machfb_save_cursor_palette;
static vi_load_cursor_palette_t machfb_load_cursor_palette;
static vi_copy_t machfb_copy;
static vi_putp_t machfb_putp;
static vi_putc_t machfb_putc;
static vi_puts_t machfb_puts;
static vi_putm_t machfb_putm;
static video_switch_t machfbvidsw = {
.probe = machfb_probe,
.init = machfb_init,
.get_info = machfb_get_info,
.query_mode = machfb_query_mode,
.set_mode = machfb_set_mode,
.save_font = machfb_save_font,
.load_font = machfb_load_font,
.show_font = machfb_show_font,
.save_palette = machfb_save_palette,
.load_palette = machfb_load_palette,
.set_border = machfb_set_border,
.save_state = machfb_save_state,
.load_state = machfb_load_state,
.set_win_org = machfb_set_win_org,
.read_hw_cursor = machfb_read_hw_cursor,
.set_hw_cursor = machfb_set_hw_cursor,
.set_hw_cursor_shape = machfb_set_hw_cursor_shape,
.blank_display = machfb_blank_display,
.mmap = machfb_mmap,
.ioctl = machfb_ioctl,
.clear = machfb_clear,
.fill_rect = machfb_fill_rect,
.bitblt = machfb_bitblt,
NULL,
NULL,
.diag = machfb_diag,
.save_cursor_palette = machfb_save_cursor_palette,
.load_cursor_palette = machfb_load_cursor_palette,
.copy = machfb_copy,
.putp = machfb_putp,
.putc = machfb_putc,
.puts = machfb_puts,
.putm = machfb_putm
};
VIDEO_DRIVER(machfb, machfbvidsw, machfb_configure);
extern sc_rndr_sw_t txtrndrsw;
RENDERER(machfb, 0, txtrndrsw, gfb_set);
RENDERER_MODULE(machfb, gfb_set);
/*
* Inline functions for getting access to register aperture.
*/
static inline uint32_t regr(struct machfb_softc *, uint32_t);
static inline uint8_t regrb(struct machfb_softc *, uint32_t);
static inline void regw(struct machfb_softc *, uint32_t, uint32_t);
static inline void regwb(struct machfb_softc *, uint32_t, uint8_t);
static inline void regwb_pll(struct machfb_softc *, uint32_t, uint8_t);
static inline uint32_t
regr(struct machfb_softc *sc, uint32_t index)
{
return bus_space_read_4(sc->sc_regt, sc->sc_regh, index);
}
static inline uint8_t
regrb(struct machfb_softc *sc, uint32_t index)
{
return bus_space_read_1(sc->sc_regt, sc->sc_regh, index);
}
static inline void
regw(struct machfb_softc *sc, uint32_t index, uint32_t data)
{
bus_space_write_4(sc->sc_regt, sc->sc_regh, index, data);
bus_space_barrier(sc->sc_regt, sc->sc_regh, index, 4,
BUS_SPACE_BARRIER_WRITE);
}
static inline void
regwb(struct machfb_softc *sc, uint32_t index, uint8_t data)
{
bus_space_write_1(sc->sc_regt, sc->sc_regh, index, data);
bus_space_barrier(sc->sc_regt, sc->sc_regh, index, 1,
BUS_SPACE_BARRIER_WRITE);
}
static inline void
regwb_pll(struct machfb_softc *sc, uint32_t index, uint8_t data)
{
regwb(sc, CLOCK_CNTL + 1, (index << 2) | PLL_WR_EN);
regwb(sc, CLOCK_CNTL + 2, data);
regwb(sc, CLOCK_CNTL + 1, (index << 2) & ~PLL_WR_EN);
}
static inline void
wait_for_fifo(struct machfb_softc *sc, uint8_t v)
{
while ((regr(sc, FIFO_STAT) & 0xffff) > (0x8000 >> v))
;
}
static inline void
wait_for_idle(struct machfb_softc *sc)
{
wait_for_fifo(sc, 16);
while ((regr(sc, GUI_STAT) & 1) != 0)
;
}
/*
* video driver interface
*/
static int
machfb_configure(int flags)
{
struct machfb_softc *sc;
phandle_t chosen, output;
ihandle_t stdout;
bus_addr_t addr;
uint32_t id;
int i, space;
sc = &machfb_softc;
if ((chosen = OF_finddevice("/chosen")) == -1) /* Quis contra nos? */
return (0);
if (OF_getprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1)
return (0);
if ((output = OF_instance_to_package(stdout)) == -1)
return (0);
if ((OF_getprop(output, "vendor-id", &id, sizeof(id)) == -1) ||
id != ATI_VENDOR)
return (0);
if (OF_getprop(output, "device-id", &id, sizeof(id)) == -1)
return (0);
for (i = 0; i < sizeof(machfb_info) / sizeof(machfb_info[0]); i++) {
if (id == machfb_info[i].chip_id) {
/*
* When being called a second time, i.e. during
* sc_probe_unit(), just return at this point.
* Note that the polarity of the VIO_PROBE_ONLY
* flag is somewhat non-intuitive.
*/
if (!(flags & VIO_PROBE_ONLY))
goto found;
sc->sc_flags = MACHFB_CONSOLE;
sc->sc_node = output;
sc->sc_chip_id = id;
break;
}
}
if (!(sc->sc_flags & MACHFB_CONSOLE))
return (0);
if (OF_getprop(output, "revision-id", &sc->sc_chip_rev,
sizeof(sc->sc_chip_rev)) == -1)
return (0);
if (OF_decode_addr(output, 0, &space, &addr) != 0)
return (0);
sc->sc_memt = &machfb_bst_store[0];
sc->sc_memh = sparc64_fake_bustag(space, addr, sc->sc_memt);
sc->sc_regt = sc->sc_memt;
bus_space_subregion(sc->sc_regt, sc->sc_memh, MACH64_REG_OFF,
MACH64_REG_SIZE, &sc->sc_regh);
if (machfb_init(0, &sc->sc_va, 0) < 0)
return (0);
found:
/* Return number of found adapters. */
return (1);
}
static int
machfb_probe(int unit, video_adapter_t **adpp, void *arg, int flags)
{
return (0);
}
static int
machfb_init(int unit, video_adapter_t *adp, int flags)
{
struct machfb_softc *sc;
phandle_t options;
video_info_t *vi;
char buf[32];
int i, j;
sc = (struct machfb_softc *)adp;
vi = &adp->va_info;
if ((regr(sc, CONFIG_CHIP_ID) & 0xffff) != sc->sc_chip_id)
return (ENXIO);
sc->sc_ramdac_freq = 0;
for (i = 0; i < sizeof(machfb_info) / sizeof(machfb_info[0]); i++) {
if (sc->sc_chip_id == machfb_info[i].chip_id) {
sc->sc_ramdac_freq = machfb_info[i].ramdac_freq;
break;
}
}
if (sc->sc_ramdac_freq == 0)
return (ENXIO);
if (sc->sc_chip_id == ATI_RAGE_II && sc->sc_chip_rev & 0x07)
sc->sc_ramdac_freq = 170000;
vid_init_struct(adp, MACHFB_DRIVER_NAME, -1, unit);
if (OF_getprop(sc->sc_node, "height", &sc->sc_height,
sizeof(sc->sc_height)) == -1)
return (ENXIO);
if (OF_getprop(sc->sc_node, "width", &sc->sc_width,
sizeof(sc->sc_width)) == -1)
return (ENXIO);
if (OF_getprop(sc->sc_node, "depth", &sc->sc_depth,
sizeof(sc->sc_depth)) == -1)
return (ENXIO);
if ((options = OF_finddevice("/options")) == -1)
return (ENXIO);
if (OF_getprop(options, "screen-#rows", buf, sizeof(buf)) == -1)
return (ENXIO);
vi->vi_height = strtol(buf, NULL, 10);
if (OF_getprop(options, "screen-#columns", buf, sizeof(buf)) == -1)
return (ENXIO);
vi->vi_width = strtol(buf, NULL, 10);
vi->vi_cwidth = 12;
vi->vi_cheight = 22;
vi->vi_flags = V_INFO_COLOR;
vi->vi_mem_model = V_INFO_MM_OTHER;
sc->sc_draw_cache = -1;
sc->sc_font = gallant12x22_data;
sc->sc_cbwidth = howmany(vi->vi_cwidth, 8); /* width in bytes */
sc->sc_xmargin = (sc->sc_width - (vi->vi_width * vi->vi_cwidth)) / 2;
sc->sc_ymargin = (sc->sc_height - (vi->vi_height * vi->vi_cheight)) / 2;
if (sc->sc_chip_id != ATI_MACH64_CT &&
!((sc->sc_chip_id == ATI_MACH64_VT ||
sc->sc_chip_id == ATI_RAGE_II) &&
(sc->sc_chip_rev & 0x07) == 0))
sc->sc_flags |= MACHFB_DSP;
sc->sc_memsize = machfb_get_memsize(sc);
if (sc->sc_memsize == 8192)
/* The last page is used as register aperture. */
sc->sc_memsize -= 4;
sc->sc_memtype = regr(sc, CONFIG_STAT0) & 0x07;
if ((sc->sc_chip_id >= ATI_RAGE_XC_PCI66 &&
sc->sc_chip_id <= ATI_RAGE_XL_PCI66) ||
(sc->sc_chip_id >= ATI_RAGE_XL_PCI &&
sc->sc_chip_id <= ATI_RAGE_XC_PCI))
sc->sc_ref_freq = 29498;
else
sc->sc_ref_freq = 14318;
regwb(sc, CLOCK_CNTL + 1, PLL_REF_DIV << 2);
sc->sc_ref_div = regrb(sc, CLOCK_CNTL + 2);
regwb(sc, CLOCK_CNTL + 1, MCLK_FB_DIV << 2);
sc->sc_mclk_fb_div = regrb(sc, CLOCK_CNTL + 2);
sc->sc_mem_freq = (2 * sc->sc_ref_freq * sc->sc_mclk_fb_div) /
(sc->sc_ref_div * 2);
sc->sc_mclk_post_div = (sc->sc_mclk_fb_div * 2 * sc->sc_ref_freq) /
(sc->sc_mem_freq * sc->sc_ref_div);
machfb_init_engine(sc);
#if 0
mach64_adjust_frame(0, 0);
#endif
sc->sc_dacw = -1;
for (i = 0; i < 16; i++)
for (j = 0; j < 16; j++)
machfb_putpalreg(sc, (i * 16) + j,
machfb_default_cmap[j].red,
machfb_default_cmap[j].green,
machfb_default_cmap[j].blue);
machfb_blank_display(adp, V_DISPLAY_BLANK);
adp->va_flags |= V_ADP_COLOR | V_ADP_BORDER | V_ADP_INITIALIZED;
if (vid_register(adp) < 0)
return (ENXIO);
adp->va_flags |= V_ADP_REGISTERED;
return (0);
}
static int
machfb_get_info(video_adapter_t *adp, int mode, video_info_t *info)
{
bcopy(&adp->va_info, info, sizeof(*info));
return (0);
}
static int
machfb_query_mode(video_adapter_t *adp, video_info_t *info)
{
return (ENODEV);
}
static int
machfb_set_mode(video_adapter_t *adp, int mode)
{
return (ENODEV);
}
static int
machfb_save_font(video_adapter_t *adp, int page, int size, u_char *data,
int c, int count)
{
return (ENODEV);
}
static int
machfb_load_font(video_adapter_t *adp, int page, int size, u_char *data,
int c, int count)
{
return (ENODEV);
}
static int
machfb_show_font(video_adapter_t *adp, int page)
{
return (ENODEV);
}
static int
machfb_save_palette(video_adapter_t *adp, u_char *palette)
{
return (ENODEV);
}
static int
machfb_load_palette(video_adapter_t *adp, u_char *palette)
{
return (ENODEV);
}
static int
machfb_set_border(video_adapter_t *adp, int border)
{
struct machfb_softc *sc;
sc = (struct machfb_softc *)adp;
machfb_fill_rect(adp, border, 0, 0, sc->sc_width, sc->sc_ymargin);
machfb_fill_rect(adp, border, 0, sc->sc_height - sc->sc_ymargin,
sc->sc_width, sc->sc_ymargin);
machfb_fill_rect(adp, border, 0, 0, sc->sc_xmargin, sc->sc_height);
machfb_fill_rect(adp, border, sc->sc_width - sc->sc_xmargin, 0,
sc->sc_xmargin, sc->sc_height);
return (0);
}
static int
machfb_save_state(video_adapter_t *adp, void *p, size_t size)
{
return (ENODEV);
}
static int
machfb_load_state(video_adapter_t *adp, void *p)
{
return (ENODEV);
}
static int
machfb_set_win_org(video_adapter_t *adp, off_t offset)
{
return (ENODEV);
}
static int
machfb_read_hw_cursor(video_adapter_t *adp, int *col, int *row)
{
*col = 0;
*row = 0;
return (0);
}
static int
machfb_set_hw_cursor(video_adapter_t *adp, int col, int row)
{
return (ENODEV);
}
static int
machfb_set_hw_cursor_shape(video_adapter_t *adp, int base, int height,
int celsize, int blink)
{
return (ENODEV);
}
static int
machfb_blank_display(video_adapter_t *adp, int mode)
{
struct machfb_softc *sc;
sc = (struct machfb_softc *)adp;
if (mode == V_DISPLAY_ON || mode == V_DISPLAY_BLANK)
regw(sc, CRTC_GEN_CNTL, (regr(sc, CRTC_GEN_CNTL) | CRTC_EN |
CRTC_EXT_DISP_EN) & ~CRTC_DISPLAY_DIS);
else
regw(sc, CRTC_GEN_CNTL, regr(sc, CRTC_GEN_CNTL) & ~CRTC_EN);
if (mode == V_DISPLAY_BLANK)
machfb_fill_rect(adp, (SC_NORM_ATTR >> 4) & 0xf, 0, 0,
sc->sc_width, sc->sc_height);
return (0);
}
static int
machfb_mmap(video_adapter_t *adp, vm_offset_t offset, vm_paddr_t *paddr,
int prot)
{
struct machfb_softc *sc;
sc = (struct machfb_softc *)adp;
if (adp->va_io_base != 0 && offset >= adp->va_io_base &&
offset < adp->va_io_base + adp->va_io_size) {
*paddr = sc->sc_vioh + offset - adp->va_io_size;
return (0);
}
if (adp->va_mem_base != 0 && offset >= adp->va_mem_base &&
offset < adp->va_mem_base + adp->va_mem_size) {
*paddr = sc->sc_vmemh + offset - adp->va_mem_base;
return (0);
}
if (offset >= adp->va_registers &&
offset < adp->va_registers + adp->va_registers_size) {
*paddr = sc->sc_memh + offset - adp->va_registers;
return (0);
}
/* 'regular' framebuffer mmap()ing */
if (offset < adp->va_window_size) {
*paddr = adp->va_window + offset;
return (0);
}
return (EINVAL);
}
static int
machfb_ioctl(video_adapter_t *adp, u_long cmd, caddr_t data)
{
struct machfb_softc *sc;
struct fbcursor *fbc;
struct fbtype *fb;
sc = (struct machfb_softc *)adp;
switch (cmd) {
case FBIOGTYPE:
fb = (struct fbtype *)data;
fb->fb_type = FBTYPE_PCIMISC;
fb->fb_height = sc->sc_height;
fb->fb_width = sc->sc_width;
fb->fb_depth = sc->sc_depth;
if (sc->sc_depth <= 1 || sc->sc_depth > 8)
fb->fb_cmsize = 0;
else
fb->fb_cmsize = 1 << sc->sc_depth;
fb->fb_size = adp->va_buffer_size;
break;
case FBIOSCURSOR:
fbc = (struct fbcursor *)data;
if (fbc->set & FB_CUR_SETCUR) {
if (fbc->enable == 0) {
machfb_cursor_enable(sc, 0);
sc->sc_flags &= ~MACHFB_CUREN;
} else
return (ENODEV);
}
break;
default:
return (fb_commonioctl(adp, cmd, data));
}
return (0);
}
static int
machfb_clear(video_adapter_t *adp)
{
return (ENODEV);
}
static int
machfb_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
{
struct machfb_softc *sc;
sc = (struct machfb_softc *)adp;
if (sc->sc_draw_cache != MACHFB_DRAW_FILLRECT) {
wait_for_fifo(sc, 7);
regw(sc, DP_WRITE_MASK, 0xff);
regw(sc, DP_PIX_WIDTH, DST_8BPP | SRC_8BPP | HOST_8BPP);
regw(sc, DP_SRC, FRGD_SRC_FRGD_CLR);
regw(sc, DP_MIX, MIX_SRC << 16);
regw(sc, CLR_CMP_CNTL, 0); /* no transparency */
regw(sc, SRC_CNTL, SRC_LINE_X_LEFT_TO_RIGHT);
regw(sc, DST_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
sc->sc_draw_cache = MACHFB_DRAW_FILLRECT;
}
wait_for_fifo(sc, 5);
regw(sc, DP_FRGD_CLR, val);
regw(sc, SRC_Y_X, (x << 16) | y);
regw(sc, SRC_WIDTH1, cx);
regw(sc, DST_Y_X, (x << 16) | y);
regw(sc, DST_HEIGHT_WIDTH, (cx << 16) | cy);
return (0);
}
static int
machfb_bitblt(video_adapter_t *adp, ...)
{
return (ENODEV);
}
static int
machfb_diag(video_adapter_t *adp, int level)
{
video_info_t info;
fb_dump_adp_info(adp->va_name, adp, level);
machfb_get_info(adp, 0, &info);
fb_dump_mode_info(adp->va_name, adp, &info, level);
return (0);
}
static int
machfb_save_cursor_palette(video_adapter_t *adp, u_char *palette)
{
return (ENODEV);
}
static int
machfb_load_cursor_palette(video_adapter_t *adp, u_char *palette)
{
return (ENODEV);
}
static int
machfb_copy(video_adapter_t *adp, vm_offset_t src, vm_offset_t dst, int n)
{
return (ENODEV);
}
static int
machfb_putp(video_adapter_t *adp, vm_offset_t off, uint32_t p, uint32_t a,
int size, int bpp, int bit_ltor, int byte_ltor)
{
return (ENODEV);
}
static int
machfb_putc(video_adapter_t *adp, vm_offset_t off, uint8_t c, uint8_t a)
{
struct machfb_softc *sc;
uint8_t *p;
int i;
sc = (struct machfb_softc *)adp;
if (sc->sc_draw_cache != MACHFB_DRAW_CHAR) {
wait_for_fifo(sc, 8);
regw(sc, DP_WRITE_MASK, 0xff); /* XXX only good for 8 bit */
regw(sc, DP_PIX_WIDTH, DST_8BPP | SRC_1BPP | HOST_1BPP);
regw(sc, DP_SRC, MONO_SRC_HOST | BKGD_SRC_BKGD_CLR |
FRGD_SRC_FRGD_CLR);
regw(sc, DP_MIX ,((MIX_SRC & 0xffff) << 16) | MIX_SRC);
regw(sc, CLR_CMP_CNTL, 0); /* no transparency */
regw(sc, SRC_CNTL, SRC_LINE_X_LEFT_TO_RIGHT);
regw(sc, DST_CNTL, DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT);
regw(sc, HOST_CNTL, HOST_BYTE_ALIGN);
sc->sc_draw_cache = MACHFB_DRAW_CHAR;
}
p = sc->sc_font + (c * adp->va_info.vi_cheight * sc->sc_cbwidth);
wait_for_fifo(sc, 6 + (adp->va_info.vi_cheight / sc->sc_cbwidth));
regw(sc, DP_BKGD_CLR, (a >> 4) & 0xf);
regw(sc, DP_FRGD_CLR, a & 0xf);
regw(sc, SRC_Y_X, 0);
regw(sc, SRC_WIDTH1, adp->va_info.vi_cwidth);
regw(sc, DST_Y_X, ((((off % adp->va_info.vi_width) *
adp->va_info.vi_cwidth) + sc->sc_xmargin) << 16) |
(((off / adp->va_info.vi_width) * adp->va_info.vi_cheight) +
sc->sc_ymargin));
regw(sc, DST_HEIGHT_WIDTH, (adp->va_info.vi_cwidth << 16) |
adp->va_info.vi_cheight);
for (i = 0; i < adp->va_info.vi_cheight * sc->sc_cbwidth; i += 4)
regw(sc, HOST_DATA0 + i, (p[i + 3] << 24 | p[i + 2] << 16 |
p[i + 1] << 8 | p[i]));
return (0);
}
static int
machfb_puts(video_adapter_t *adp, vm_offset_t off, uint16_t *s, int len)
{
struct machfb_softc *sc;
int blanks, i, x1, x2, y1, y2;
uint8_t a, c, color1, color2;
sc = (struct machfb_softc *)adp;
#define MACHFB_BLANK machfb_fill_rect(adp, color1, x1, y1, \
blanks * adp->va_info.vi_cwidth, \
adp->va_info.vi_cheight)
blanks = color1 = x1 = y1 = 0;
for (i = 0; i < len; i++) {
/*
* Accelerate continuous blanks by drawing a respective
* rectangle instead. Drawing a rectangle of any size
* takes about the same number of operations as drawing
* a single character.
*/
c = s[i] & 0xff;
a = (s[i] & 0xff00) >> 8;
if (c == 0x00 || c == 0x20 || c == 0xdb || c == 0xff) {
color2 = (a >> (c == 0xdb ? 0 : 4) & 0xf);
x2 = (((off + i) % adp->va_info.vi_width) *
adp->va_info.vi_cwidth) + sc->sc_xmargin;
y2 = (((off + i) / adp->va_info.vi_width) *
adp->va_info.vi_cheight) + sc->sc_ymargin;
if (blanks == 0) {
color1 = color2;
x1 = x2;
y1 = y2;
blanks++;
} else if (color1 != color2 || y1 != y2) {
MACHFB_BLANK;
color1 = color2;
x1 = x2;
y1 = y2;
blanks = 1;
} else
blanks++;
} else {
if (blanks != 0) {
MACHFB_BLANK;
blanks = 0;
}
(*vidsw[adp->va_index]->putc)(adp, off + i, c, a);
}
}
if (blanks != 0)
MACHFB_BLANK;
#undef MACHFB_BLANK
return (0);
}
static int
machfb_putm(video_adapter_t *adp, int x, int y, uint8_t *pixel_image,
uint32_t pixel_mask, int size)
{
struct machfb_softc *sc;
int error;
sc = (struct machfb_softc *)adp;
if ((!(sc->sc_flags & MACHFB_CUREN)) &&
(error = machfb_cursor_install(sc)) < 0)
return (error);
else {
/*
* The hardware cursor always must be disabled when
* fiddling with its bits otherwise some artifacts
* may appear on the screen.
*/
machfb_cursor_enable(sc, 0);
}
regw(sc, CUR_HORZ_VERT_OFF, 0);
if ((regr(sc, GEN_TEST_CNTL) & CRTC_DBL_SCAN_EN) != 0)
y <<= 1;
regw(sc, CUR_HORZ_VERT_POSN, ((y + sc->sc_ymargin) << 16) |
(x + sc->sc_xmargin));
machfb_cursor_enable(sc, 1);
sc->sc_flags |= MACHFB_CUREN;
return (0);
}
/*
* PCI bus interface
*/
static int
machfb_pci_probe(device_t dev)
{
int i;
if (pci_get_class(dev) != PCIC_DISPLAY ||
pci_get_subclass(dev) != PCIS_DISPLAY_VGA)
return (ENXIO);
for (i = 0; i < sizeof(machfb_info) / sizeof(machfb_info[0]); i++) {
if (pci_get_device(dev) == machfb_info[i].chip_id) {
device_set_desc(dev, machfb_info[i].name);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
static int
machfb_pci_attach(device_t dev)
{
struct machfb_softc *sc;
video_adapter_t *adp;
video_switch_t *sw;
phandle_t node;
uint32_t *p32, saved_value;
uint8_t *p;
int error, i;
node = ofw_bus_get_node(dev);
if ((sc = (struct machfb_softc *)vid_get_adapter(vid_find_adapter(
MACHFB_DRIVER_NAME, 0))) != NULL && sc->sc_node == node) {
device_printf(dev, "console\n");
device_set_softc(dev, sc);
} else {
sc = device_get_softc(dev);
bzero(sc, sizeof(struct machfb_softc));
sc->sc_node = node;
sc->sc_chip_id = pci_get_device(dev);
sc->sc_chip_rev = pci_get_revid(dev);
}
adp = &sc->sc_va;
/*
* Regardless whether we are the console and already allocated
* resources in machfb_configure() or not we have to allocate
* them here (again) in order for rman_get_virtual() to work.
*/
/* Enable memory and IO access. */
pci_write_config(dev, PCIR_COMMAND,
pci_read_config(dev, PCIR_COMMAND, 2) | PCIM_CMD_PORTEN |
PCIM_CMD_MEMEN, 2);
sc->sc_memrid = PCIR_BAR(0);
if ((sc->sc_memres = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->sc_memrid, RF_ACTIVE)) == NULL) {
device_printf(dev, "cannot allocate memory resources\n");
return (ENXIO);
}
sc->sc_memt = rman_get_bustag(sc->sc_memres);
sc->sc_memh = rman_get_bushandle(sc->sc_memres);
adp->va_registers = rman_get_start(sc->sc_memres);
adp->va_registers_size = rman_get_size(sc->sc_memres);
sc->sc_regt = sc->sc_memt;
bus_space_subregion(sc->sc_regt, sc->sc_memh, MACH64_REG_OFF,
MACH64_REG_SIZE, &sc->sc_regh);
adp->va_buffer = (vm_offset_t)rman_get_virtual(sc->sc_memres);
adp->va_buffer_size = rman_get_size(sc->sc_memres);
/*
* Depending on the firmware version the VGA I/O and/or memory
* resources of the Mach64 chips come up disabled. We generally
* enable them above (pci(4) actually already did this unless
* pci_enable_io_modes is not set) but this doesn't necessarily
* mean that we get valid ones. Invalid resources seem to have
* in common that they start at address 0. We don't allocate
* them in this case in order to avoid warnings in apb(4) and
* crashes when using these invalid resources. Xorg is aware
* of this and doesn't use the VGA resources in this case (but
* demands them if they are valid).
*/
sc->sc_viorid = PCIR_BAR(1);
if (bus_get_resource_start(dev, SYS_RES_IOPORT, sc->sc_viorid) != 0) {
if ((sc->sc_viores = bus_alloc_resource_any(dev,
SYS_RES_IOPORT, &sc->sc_viorid, RF_ACTIVE)) == NULL) {
device_printf(dev,
"cannot allocate VGA I/O resources\n");
error = ENXIO;
goto fail_memres;
}
sc->sc_viot = rman_get_bustag(sc->sc_viores);
sc->sc_vioh = rman_get_bushandle(sc->sc_viores);
adp->va_io_base = rman_get_start(sc->sc_viores);
adp->va_io_size = rman_get_size(sc->sc_viores);
}
sc->sc_vmemrid = PCIR_BAR(2);
if (bus_get_resource_start(dev, SYS_RES_MEMORY, sc->sc_vmemrid) != 0) {
if ((sc->sc_vmemres = bus_alloc_resource_any(dev,
SYS_RES_MEMORY, &sc->sc_vmemrid, RF_ACTIVE)) == NULL) {
device_printf(dev,
"cannot allocate VGA memory resources\n");
error = ENXIO;
goto fail_viores;
}
sc->sc_vmemt = rman_get_bustag(sc->sc_vmemres);
sc->sc_vmemh = rman_get_bushandle(sc->sc_vmemres);
adp->va_mem_base = rman_get_start(sc->sc_vmemres);
adp->va_mem_size = rman_get_size(sc->sc_vmemres);
}
device_printf(dev,
"%d MB aperture at 0x%08x, %d KB registers at 0x%08x\n",
(u_int)(adp->va_buffer_size / (1024 * 1024)),
(u_int)adp->va_buffer, MACH64_REG_SIZE / 1024,
(u_int)sc->sc_regh);
if (!(sc->sc_flags & MACHFB_CONSOLE)) {
if ((sw = vid_get_switch(MACHFB_DRIVER_NAME)) == NULL) {
device_printf(dev, "cannot get video switch\n");
error = ENODEV;
goto fail_vmemres;
}
/*
* During device configuration we don't necessarily probe
* the adapter which is the console first so we can't use
* the device unit number for the video adapter unit. The
* worst case would be that we use the video adapter unit
* 0 twice. As it doesn't really matter which unit number
* the corresponding video adapter has just use the next
* unused one.
*/
for (i = 0; i < devclass_get_maxunit(machfb_devclass); i++)
if (vid_find_adapter(MACHFB_DRIVER_NAME, i) < 0)
break;
if ((error = sw->init(i, adp, 0)) != 0) {
device_printf(dev, "cannot initialize adapter\n");
goto fail_vmemres;
}
}
device_printf(dev,
"%ld KB %s %d.%d MHz, maximum RAMDAC clock %d MHz, %sDSP\n",
(u_long)sc->sc_memsize, machfb_memtype_names[sc->sc_memtype],
sc->sc_mem_freq / 1000, sc->sc_mem_freq % 1000,
sc->sc_ramdac_freq / 1000,
(sc->sc_flags & MACHFB_DSP) ? "" : "no ");
device_printf(dev, "resolution %dx%d at %d bpp\n",
sc->sc_width, sc->sc_height, sc->sc_depth);
/*
* Test whether the aperture is byte swapped or not, set
* va_window and va_window_size as appropriate.
*/
p32 = (uint32_t *)adp->va_buffer;
saved_value = *p32;
p = (uint8_t *)adp->va_buffer;
*p32 = 0x12345678;
if (!(p[0] == 0x12 && p[1] == 0x34 && p[2] == 0x56 && p[3] == 0x78)) {
adp->va_window = adp->va_buffer + 0x800000;
adp->va_window_size = adp->va_buffer_size - 0x800000;
} else {
adp->va_window = adp->va_buffer;
adp->va_window_size = adp->va_buffer_size;
}
*p32 = saved_value;
adp->va_window_gran = adp->va_window_size;
/*
* Allocate one page for the mouse pointer image at the end of
* the little endian aperture, right before the memory mapped
* registers that might also reside there. Must be done after
* sc_memsize was set and possibly adjusted to account for the
* memory mapped registers.
*/
sc->sc_curoff = (sc->sc_memsize * 1024) - PAGE_SIZE;
sc->sc_memsize -= PAGE_SIZE / 1024;
machfb_cursor_enable(sc, 0);
/* Initialize with an all transparent image. */
memset((void *)(adp->va_buffer + sc->sc_curoff), 0xaa, PAGE_SIZE);
/*
* For cosmetics register a handler that turns off the mouse
* pointer on halt. Register a second handler that turns off
* the CRTC when resetting, otherwise the OFW boot command
* issued by cpu_reset() just doesn't work.
*/
EVENTHANDLER_REGISTER(shutdown_final, machfb_shutdown_final, sc,
SHUTDOWN_PRI_DEFAULT);
EVENTHANDLER_REGISTER(shutdown_reset, machfb_shutdown_reset, sc,
SHUTDOWN_PRI_DEFAULT);
return (0);
fail_vmemres:
if (sc->sc_vmemres != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_vmemrid,
sc->sc_vmemres);
fail_viores:
if (sc->sc_viores != NULL)
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_viorid,
sc->sc_viores);
fail_memres:
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid, sc->sc_memres);
return (error);
}
static int
machfb_pci_detach(device_t dev)
{
return (EINVAL);
}
/*
* internal functions
*/
static void
machfb_cursor_enable(struct machfb_softc *sc, int onoff)
{
if (onoff)
regw(sc, GEN_TEST_CNTL,
regr(sc, GEN_TEST_CNTL) | HWCURSOR_ENABLE);
else
regw(sc, GEN_TEST_CNTL,
regr(sc, GEN_TEST_CNTL) &~ HWCURSOR_ENABLE);
}
static int
machfb_cursor_install(struct machfb_softc *sc)
{
uint16_t *p;
uint8_t fg;
int i, j;
if (sc->sc_curoff == 0)
return (ENODEV);
machfb_cursor_enable(sc, 0);
regw(sc, CUR_OFFSET, sc->sc_curoff >> 3);
fg = SC_NORM_ATTR & 0xf;
regw(sc, CUR_CLR0, sc->sc_cmap_red[fg] << 24 |
sc->sc_cmap_green[fg] << 16 | sc->sc_cmap_blue[fg] << 8 | fg);
p = (uint16_t *)(sc->sc_va.va_buffer + sc->sc_curoff);
for (i = 0; i < 64; i++)
for (j = 0; j < 8; j++)
*(p++) = machfb_mouse_pointer_lut[
machfb_mouse_pointer_bits[i][j] >> 4] |
machfb_mouse_pointer_lut[
machfb_mouse_pointer_bits[i][j] & 0x0f] << 8;
return (0);
}
static int
machfb_get_memsize(struct machfb_softc *sc)
{
int tmp, memsize;
int mem_tab[] = {
512, 1024, 2048, 4096, 6144, 8192, 12288, 16384
};
tmp = regr(sc, MEM_CNTL);
#ifdef MACHFB_DEBUG
printf("memcntl=0x%08x\n", tmp);
#endif
if (sc->sc_flags & MACHFB_DSP) {
tmp &= 0x0000000f;
if (tmp < 8)
memsize = (tmp + 1) * 512;
else if (tmp < 12)
memsize = (tmp - 3) * 1024;
else
memsize = (tmp - 7) * 2048;
} else
memsize = mem_tab[tmp & 0x07];
return (memsize);
}
static void
machfb_reset_engine(struct machfb_softc *sc)
{
/* Reset engine.*/
regw(sc, GEN_TEST_CNTL, regr(sc, GEN_TEST_CNTL) & ~GUI_ENGINE_ENABLE);
/* Enable engine. */
regw(sc, GEN_TEST_CNTL, regr(sc, GEN_TEST_CNTL) | GUI_ENGINE_ENABLE);
/*
* Ensure engine is not locked up by clearing any FIFO or
* host errors.
*/
regw(sc, BUS_CNTL, regr(sc, BUS_CNTL) | BUS_HOST_ERR_ACK |
BUS_FIFO_ERR_ACK);
}
static void
machfb_init_engine(struct machfb_softc *sc)
{
uint32_t pitch_value;
pitch_value = sc->sc_width;
if (sc->sc_depth == 24)
pitch_value *= 3;
machfb_reset_engine(sc);
wait_for_fifo(sc, 14);
regw(sc, CONTEXT_MASK, 0xffffffff);
regw(sc, DST_OFF_PITCH, (pitch_value / 8) << 22);
regw(sc, DST_Y_X, 0);
regw(sc, DST_HEIGHT, 0);
regw(sc, DST_BRES_ERR, 0);
regw(sc, DST_BRES_INC, 0);
regw(sc, DST_BRES_DEC, 0);
regw(sc, DST_CNTL, DST_LAST_PEL | DST_X_LEFT_TO_RIGHT |
DST_Y_TOP_TO_BOTTOM);
regw(sc, SRC_OFF_PITCH, (pitch_value / 8) << 22);
regw(sc, SRC_Y_X, 0);
regw(sc, SRC_HEIGHT1_WIDTH1, 1);
regw(sc, SRC_Y_X_START, 0);
regw(sc, SRC_HEIGHT2_WIDTH2, 1);
regw(sc, SRC_CNTL, SRC_LINE_X_LEFT_TO_RIGHT);
wait_for_fifo(sc, 13);
regw(sc, HOST_CNTL, 0);
regw(sc, PAT_REG0, 0);
regw(sc, PAT_REG1, 0);
regw(sc, PAT_CNTL, 0);
regw(sc, SC_LEFT, 0);
regw(sc, SC_TOP, 0);
regw(sc, SC_BOTTOM, sc->sc_height - 1);
regw(sc, SC_RIGHT, pitch_value - 1);
regw(sc, DP_BKGD_CLR, 0);
regw(sc, DP_FRGD_CLR, 0xffffffff);
regw(sc, DP_WRITE_MASK, 0xffffffff);
regw(sc, DP_MIX, (MIX_SRC << 16) | MIX_DST);
regw(sc, DP_SRC, FRGD_SRC_FRGD_CLR);
wait_for_fifo(sc, 3);
regw(sc, CLR_CMP_CLR, 0);
regw(sc, CLR_CMP_MASK, 0xffffffff);
regw(sc, CLR_CMP_CNTL, 0);
wait_for_fifo(sc, 2);
switch (sc->sc_depth) {
case 8:
regw(sc, DP_PIX_WIDTH, HOST_8BPP | SRC_8BPP | DST_8BPP);
regw(sc, DP_CHAIN_MASK, DP_CHAIN_8BPP);
regw(sc, DAC_CNTL, regr(sc, DAC_CNTL) | DAC_8BIT_EN);
break;
#if 0
case 32:
regw(sc, DP_PIX_WIDTH, HOST_32BPP | SRC_32BPP | DST_32BPP);
regw(sc, DP_CHAIN_MASK, DP_CHAIN_32BPP);
regw(sc, DAC_CNTL, regr(sc, DAC_CNTL) | DAC_8BIT_EN);
break;
#endif
}
wait_for_fifo(sc, 5);
regw(sc, CRTC_INT_CNTL, regr(sc, CRTC_INT_CNTL) & ~0x20);
regw(sc, GUI_TRAJ_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
wait_for_idle(sc);
}
#if 0
static void
machfb_adjust_frame(struct machfb_softc *sc, int x, int y)
{
int offset;
offset = ((x + y * sc->sc_width) * (sc->sc_depth >> 3)) >> 3;
regw(sc, CRTC_OFF_PITCH, (regr(sc, CRTC_OFF_PITCH) & 0xfff00000) |
offset);
}
#endif
static void
machfb_putpalreg(struct machfb_softc *sc, uint8_t index, uint8_t r, uint8_t g,
uint8_t b)
{
sc->sc_cmap_red[index] = r;
sc->sc_cmap_green[index] = g;
sc->sc_cmap_blue[index] = b;
/*
* Writing the DAC index takes a while, in theory we can poll some
* register to see when it's ready - but we better avoid writing it
* unnecessarily.
*/
if (index != sc->sc_dacw) {
regwb(sc, DAC_MASK, 0xff);
regwb(sc, DAC_WINDEX, index);
}
sc->sc_dacw = index + 1;
regwb(sc, DAC_DATA, r);
regwb(sc, DAC_DATA, g);
regwb(sc, DAC_DATA, b);
}
static void
machfb_shutdown_final(void *v)
{
struct machfb_softc *sc = v;
machfb_cursor_enable(sc, 0);
}
static void
machfb_shutdown_reset(void *v)
{
struct machfb_softc *sc = v;
machfb_blank_display(&sc->sc_va, V_DISPLAY_STAND_BY);
}