1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/sys/dev/dpt/dpt_pci.c
Peter Wemm 16c1138c89 Change BUS_SPACE_UNRESTRICTED (~0ul) to plain ~0 when used in the
'int nsegments' argument to bus_dma_tag_create().  ~0ul does not fit in
an int on machines with 64 bit longs.
2002-10-09 08:54:32 +00:00

204 lines
5.1 KiB
C

/*-
* Copyright (c) 2000 Matthew N. Dodd <winter@jurai.net>
* All rights reserved.
*
* Copyright (c) 1997 Simon Shapiro
* All Rights Reserved
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus_memio.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <cam/scsi/scsi_all.h>
#include <dev/dpt/dpt.h>
#define DPT_VENDOR_ID 0x1044
#define DPT_DEVICE_ID 0xa400
#define DPT_PCI_IOADDR PCIR_MAPS /* I/O Address */
#define DPT_PCI_MEMADDR (PCIR_MAPS + 4) /* Mem I/O Address */
#define ISA_PRIMARY_WD_ADDRESS 0x1f8
static int dpt_pci_probe (device_t);
static int dpt_pci_attach (device_t);
static int
dpt_pci_probe (device_t dev)
{
if ((pci_get_vendor(dev) == DPT_VENDOR_ID) &&
(pci_get_device(dev) == DPT_DEVICE_ID)) {
device_set_desc(dev, "DPT Caching SCSI RAID Controller");
return (0);
}
return (ENXIO);
}
static int
dpt_pci_attach (device_t dev)
{
dpt_softc_t * dpt;
struct resource *io = 0;
struct resource *irq = 0;
int s;
int rid;
void * ih;
int error = 0;
int iotype = 0;
u_int32_t command;
command = pci_read_config(dev, PCIR_COMMAND, /*bytes*/1);
#ifdef DPT_ALLOW_MMIO
if ((command & PCIM_CMD_MEMEN) != 0) {
rid = DPT_PCI_MEMADDR;
iotype = SYS_RES_MEMORY;
io = bus_alloc_resource(dev, iotype, &rid, 0, ~0, 1, RF_ACTIVE);
}
#endif
if (io == NULL && (command & PCIM_CMD_PORTEN) != 0) {
rid = DPT_PCI_IOADDR;
iotype = SYS_RES_IOPORT;
io = bus_alloc_resource(dev, iotype, &rid, 0, ~0, 1, RF_ACTIVE);
}
if (io == NULL) {
device_printf(dev, "can't allocate register resources\n");
error = ENOMEM;
goto bad;
}
rid = 0;
irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_ACTIVE | RF_SHAREABLE);
if (!irq) {
device_printf(dev, "No irq?!\n");
error = ENOMEM;
goto bad;
}
/* Ensure busmastering is enabled */
command |= PCIM_CMD_BUSMASTEREN;
pci_write_config(dev, PCIR_COMMAND, command, /*bytes*/1);
if (rman_get_start(io) == (ISA_PRIMARY_WD_ADDRESS - 0x10)) {
#ifdef DPT_DEBUG_WARN
device_printf(dev, "Mapped as an IDE controller. "
"Disabling SCSI setup\n");
#endif
error = ENXIO;
goto bad;
}
/* Device registers are offset 0x10 into the register window. FEH */
dpt = dpt_alloc(dev, rman_get_bustag(io), rman_get_bushandle(io) + 0x10);
if (dpt == NULL) {
error = ENXIO;
goto bad;
}
/* Allocate a dmatag representing the capabilities of this attachment */
/* XXX Should be a child of the PCI bus dma tag */
if (bus_dma_tag_create( /* parent */ NULL,
/* alignemnt */ 1,
/* boundary */ 0,
/* lowaddr */ BUS_SPACE_MAXADDR_32BIT,
/* highaddr */ BUS_SPACE_MAXADDR,
/* filter */ NULL,
/* filterarg */ NULL,
/* maxsize */ BUS_SPACE_MAXSIZE_32BIT,
/* nsegments */ ~0,
/* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
/* flags */ 0,
&dpt->parent_dmat) != 0) {
dpt_free(dpt);
error = ENXIO;
goto bad;
}
s = splcam();
if (dpt_init(dpt) != 0) {
dpt_free(dpt);
error = ENXIO;
goto bad;
}
/* Register with the XPT */
dpt_attach(dpt);
splx(s);
if (bus_setup_intr(dev, irq, INTR_TYPE_CAM | INTR_ENTROPY, dpt_intr,
dpt, &ih)) {
device_printf(dev, "Unable to register interrupt handler\n");
error = ENXIO;
goto bad;
}
return (error);
bad:
if (io)
bus_release_resource(dev, iotype, 0, io);
if (irq)
bus_release_resource(dev, SYS_RES_IRQ, 0, irq);
return (error);
}
static device_method_t dpt_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, dpt_pci_probe),
DEVMETHOD(device_attach, dpt_pci_attach),
{ 0, 0 }
};
static driver_t dpt_pci_driver = {
"dpt",
dpt_pci_methods,
sizeof(dpt_softc_t),
};
static devclass_t dpt_devclass;
DRIVER_MODULE(dpt, pci, dpt_pci_driver, dpt_devclass, 0, 0);