mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
892 lines
22 KiB
C
892 lines
22 KiB
C
/*
|
|
* Cronyx-Sigma adapter driver for FreeBSD.
|
|
* Supports PPP/HDLC protocol in synchronous mode,
|
|
* and asyncronous channels with full modem control.
|
|
*
|
|
* Copyright (C) 1994 Cronyx Ltd.
|
|
* Author: Serge Vakulenko, <vak@zebub.msk.su>
|
|
*
|
|
* This software is distributed with NO WARRANTIES, not even the implied
|
|
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Authors grant any other persons or organisations permission to use
|
|
* or modify this software as long as this message is kept with the software,
|
|
* all derivative works or modified versions.
|
|
*
|
|
* Version 1.9, Wed Oct 4 18:58:15 MSK 1995
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include "cx.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/socket.h>
|
|
#include <net/if.h>
|
|
|
|
# define t_out t_outq
|
|
# define RB_LEN(q) ((q).c_cc)
|
|
# define RB_GETC(q) getc(&q)
|
|
#ifndef TSA_CARR_ON /* FreeBSD 2.x before not long after 2.0.5 */
|
|
# define TSA_CARR_ON(tp) tp
|
|
# define TSA_OLOWAT(q) ((caddr_t)&(q)->t_out)
|
|
#endif
|
|
|
|
#include <machine/cronyx.h>
|
|
#include <i386/isa/cxreg.h>
|
|
|
|
/* XXX imported from if_cx.c. */
|
|
void cxswitch (cx_chan_t *c, cx_soft_opt_t new);
|
|
|
|
/* XXX exported. */
|
|
void cxmint (cx_chan_t *c);
|
|
int cxrinta (cx_chan_t *c);
|
|
void cxtinta (cx_chan_t *c);
|
|
timeout_t cxtimeout;
|
|
|
|
#ifdef DEBUG
|
|
# define print(s) printf s
|
|
#else
|
|
# define print(s) {/*void*/}
|
|
#endif
|
|
|
|
#define DMABUFSZ (6*256) /* buffer size */
|
|
#define BYTE *(unsigned char*)&
|
|
#define UNIT(u) (minor(u) & 077)
|
|
#define UNIT_CTL 077
|
|
|
|
extern cx_board_t cxboard [NCX]; /* adapter state structures */
|
|
extern cx_chan_t *cxchan [NCX*NCHAN]; /* unit to channel struct pointer */
|
|
static struct tty cx_tty [NCX*NCHAN]; /* tty data */
|
|
|
|
static d_open_t cxopen;
|
|
static d_close_t cxclose;
|
|
static d_ioctl_t cxioctl;
|
|
|
|
#define CDEV_MAJOR 42
|
|
/* Don't make this static, since if_cx.c uses it. */
|
|
struct cdevsw cx_cdevsw = {
|
|
/* open */ cxopen,
|
|
/* close */ cxclose,
|
|
/* read */ ttyread,
|
|
/* write */ ttywrite,
|
|
/* ioctl */ cxioctl,
|
|
/* poll */ ttypoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ nostrategy,
|
|
/* name */ "cx",
|
|
/* maj */ CDEV_MAJOR,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ D_TTY | D_KQFILTER,
|
|
/* kqfilter */ ttykqfilter,
|
|
};
|
|
|
|
static void cxoproc (struct tty *tp);
|
|
static void cxstop (struct tty *tp, int flag);
|
|
static int cxparam (struct tty *tp, struct termios *t);
|
|
|
|
int cxopen (dev_t dev, int flag, int mode, struct thread *td)
|
|
{
|
|
int unit = UNIT (dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
unsigned short port;
|
|
struct tty *tp;
|
|
int error = 0;
|
|
|
|
if (unit == UNIT_CTL) {
|
|
print (("cx: cxopen /dev/cronyx\n"));
|
|
return (0);
|
|
}
|
|
if (unit >= NCX*NCHAN || !c || c->type==T_NONE)
|
|
return (ENXIO);
|
|
port = c->chip->port;
|
|
print (("cx%d.%d: cxopen unit=%d\n", c->board->num, c->num, unit));
|
|
if (c->mode != M_ASYNC)
|
|
return (EBUSY);
|
|
if (! c->ttyp) {
|
|
c->ttyp = &cx_tty[unit];
|
|
c->ttyp->t_oproc = cxoproc;
|
|
c->ttyp->t_stop = cxstop;
|
|
c->ttyp->t_param = cxparam;
|
|
}
|
|
dev->si_tty = c->ttyp;
|
|
tp = c->ttyp;
|
|
tp->t_dev = dev;
|
|
if ((tp->t_state & TS_ISOPEN) && (tp->t_state & TS_XCLUDE) &&
|
|
suser(td))
|
|
return (EBUSY);
|
|
if (! (tp->t_state & TS_ISOPEN)) {
|
|
ttychars (tp);
|
|
if (tp->t_ispeed == 0) {
|
|
tp->t_iflag = 0;
|
|
tp->t_oflag = 0;
|
|
tp->t_lflag = 0;
|
|
tp->t_cflag = CREAD | CS8 | HUPCL;
|
|
tp->t_ispeed = c->rxbaud;
|
|
tp->t_ospeed = c->txbaud;
|
|
}
|
|
cxparam (tp, &tp->t_termios);
|
|
ttsetwater (tp);
|
|
}
|
|
|
|
spltty ();
|
|
if (! (tp->t_state & TS_ISOPEN)) {
|
|
/*
|
|
* Compute optimal receiver buffer length.
|
|
* The best choice is rxbaud/400.
|
|
* Make it even, to avoid byte-wide DMA transfers.
|
|
* --------------------------
|
|
* Baud rate Buffer length
|
|
* --------------------------
|
|
* 300 4
|
|
* 1200 4
|
|
* 9600 24
|
|
* 19200 48
|
|
* 38400 96
|
|
* 57600 192
|
|
* 115200 288
|
|
* --------------------------
|
|
*/
|
|
int rbsz = (c->rxbaud + 800 - 1) / 800 * 2;
|
|
if (rbsz < 4)
|
|
rbsz = 4;
|
|
else if (rbsz > DMABUFSZ)
|
|
rbsz = DMABUFSZ;
|
|
|
|
/* Initialize channel, enable receiver. */
|
|
cx_cmd (port, CCR_INITCH | CCR_ENRX);
|
|
cx_cmd (port, CCR_INITCH | CCR_ENRX);
|
|
|
|
/* Start receiver. */
|
|
outw (ARBCNT(port), rbsz);
|
|
outw (BRBCNT(port), rbsz);
|
|
outw (ARBSTS(port), BSTS_OWN24);
|
|
outw (BRBSTS(port), BSTS_OWN24);
|
|
|
|
/* Enable interrupts. */
|
|
outb (IER(port), IER_RXD | IER_RET | IER_TXD | IER_MDM);
|
|
|
|
cx_chan_dtr (c, 1);
|
|
cx_chan_rts (c, 1);
|
|
}
|
|
if (cx_chan_cd (c))
|
|
(*linesw[tp->t_line].l_modem)(tp, 1);
|
|
if (! (flag & O_NONBLOCK)) {
|
|
/* Lock the channel against cxconfig while we are
|
|
* waiting for carrier. */
|
|
c->sopt.lock = 1;
|
|
while (!(tp->t_cflag & CLOCAL) && !(tp->t_state & TS_CARR_ON))
|
|
if ((error = tsleep (TSA_CARR_ON(tp), TTIPRI | PCATCH,
|
|
"cxdcd", 0)))
|
|
break;
|
|
c->sopt.lock = 0; /* Unlock the channel. */
|
|
}
|
|
print (("cx%d.%d: cxopen done csr=%b\n", c->board->num, c->num,
|
|
inb(CSR(c->chip->port)), CSRA_BITS));
|
|
spl0 ();
|
|
if (error)
|
|
return (error);
|
|
error = (*linesw[tp->t_line].l_open) (dev, tp);
|
|
return (error);
|
|
}
|
|
|
|
int cxclose (dev_t dev, int flag, int mode, struct thread *td)
|
|
{
|
|
int unit = UNIT (dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
struct tty *tp;
|
|
int s;
|
|
|
|
if (unit == UNIT_CTL)
|
|
return (0);
|
|
tp = c->ttyp;
|
|
(*linesw[tp->t_line].l_close) (tp, flag);
|
|
|
|
/* Disable receiver.
|
|
* Transmitter continues sending the queued data. */
|
|
s = spltty ();
|
|
outb (CAR(c->chip->port), c->num & 3);
|
|
outb (IER(c->chip->port), IER_TXD | IER_MDM);
|
|
cx_cmd (c->chip->port, CCR_DISRX);
|
|
|
|
/* Clear DTR and RTS. */
|
|
if ((tp->t_cflag & HUPCL) || ! (tp->t_state & TS_ISOPEN)) {
|
|
cx_chan_dtr (c, 0);
|
|
cx_chan_rts (c, 0);
|
|
}
|
|
|
|
/* Stop sending break. */
|
|
if (c->brk == BRK_SEND) {
|
|
c->brk = BRK_STOP;
|
|
if (! (tp->t_state & TS_BUSY))
|
|
cxoproc (tp);
|
|
}
|
|
splx (s);
|
|
ttyclose (tp);
|
|
return (0);
|
|
}
|
|
|
|
int cxioctl (dev_t dev, u_long cmd, caddr_t data, int flag, struct thread *td)
|
|
{
|
|
int unit = UNIT (dev);
|
|
cx_chan_t *c, *m;
|
|
cx_stat_t *st;
|
|
struct tty *tp;
|
|
int error, s;
|
|
unsigned char msv;
|
|
struct ifnet *master;
|
|
|
|
if (unit == UNIT_CTL) {
|
|
/* Process an ioctl request on /dev/cronyx */
|
|
cx_options_t *o = (cx_options_t*) data;
|
|
|
|
if (o->board >= NCX || o->channel >= NCHAN)
|
|
return (EINVAL);
|
|
c = &cxboard[o->board].chan[o->channel];
|
|
if (c->type == T_NONE)
|
|
return (ENXIO);
|
|
switch (cmd) {
|
|
default:
|
|
return (EINVAL);
|
|
|
|
case CXIOCSETMODE:
|
|
print (("cx%d.%d: CXIOCSETMODE\n", o->board, o->channel));
|
|
if (c->type == T_NONE)
|
|
return (EINVAL);
|
|
if (c->type == T_ASYNC && o->mode != M_ASYNC)
|
|
return (EINVAL);
|
|
if (o->mode == M_ASYNC)
|
|
switch (c->type) {
|
|
case T_SYNC_RS232:
|
|
case T_SYNC_V35:
|
|
case T_SYNC_RS449:
|
|
return (EINVAL);
|
|
}
|
|
/* Somebody is waiting for carrier? */
|
|
if (c->sopt.lock)
|
|
return (EBUSY);
|
|
/* /dev/ttyXX is already opened by someone? */
|
|
if (c->mode == M_ASYNC && c->ttyp &&
|
|
(c->ttyp->t_state & TS_ISOPEN))
|
|
return (EBUSY);
|
|
/* Network interface is up? */
|
|
if (c->mode != M_ASYNC && (c->ifp->if_flags & IFF_UP))
|
|
return (EBUSY);
|
|
|
|
/* Find the master interface. */
|
|
master = *o->master ? ifunit (o->master) : c->ifp;
|
|
if (! master)
|
|
return (EINVAL);
|
|
m = cxchan[master->if_unit];
|
|
|
|
/* Leave the previous master queue. */
|
|
if (c->master != c->ifp) {
|
|
cx_chan_t *p = cxchan[c->master->if_unit];
|
|
|
|
for (; p; p=p->slaveq)
|
|
if (p->slaveq == c)
|
|
p->slaveq = c->slaveq;
|
|
}
|
|
|
|
/* Set up new master. */
|
|
c->master = master;
|
|
c->slaveq = 0;
|
|
|
|
/* Join the new master queue. */
|
|
if (c->master != c->ifp) {
|
|
c->slaveq = m->slaveq;
|
|
m->slaveq = c;
|
|
}
|
|
|
|
c->mode = o->mode;
|
|
c->rxbaud = o->rxbaud;
|
|
c->txbaud = o->txbaud;
|
|
c->opt = o->opt;
|
|
c->aopt = o->aopt;
|
|
c->hopt = o->hopt;
|
|
c->bopt = o->bopt;
|
|
c->xopt = o->xopt;
|
|
switch (c->num) {
|
|
case 0: c->board->if0type = o->iftype; break;
|
|
case 8: c->board->if8type = o->iftype; break;
|
|
}
|
|
s = spltty ();
|
|
cxswitch (c, o->sopt);
|
|
cx_setup_chan (c);
|
|
outb (IER(c->chip->port), 0);
|
|
splx (s);
|
|
break;
|
|
|
|
case CXIOCGETSTAT:
|
|
st = (cx_stat_t*) data;
|
|
st->rintr = c->stat->rintr;
|
|
st->tintr = c->stat->tintr;
|
|
st->mintr = c->stat->mintr;
|
|
st->ibytes = c->stat->ibytes;
|
|
st->ipkts = c->stat->ipkts;
|
|
st->ierrs = c->stat->ierrs;
|
|
st->obytes = c->stat->obytes;
|
|
st->opkts = c->stat->opkts;
|
|
st->oerrs = c->stat->oerrs;
|
|
break;
|
|
|
|
case CXIOCGETMODE:
|
|
print (("cx%d.%d: CXIOCGETMODE\n", o->board, o->channel));
|
|
o->type = c->type;
|
|
o->mode = c->mode;
|
|
o->rxbaud = c->rxbaud;
|
|
o->txbaud = c->txbaud;
|
|
o->opt = c->opt;
|
|
o->aopt = c->aopt;
|
|
o->hopt = c->hopt;
|
|
o->bopt = c->bopt;
|
|
o->xopt = c->xopt;
|
|
o->sopt = c->sopt;
|
|
switch (c->num) {
|
|
case 0: o->iftype = c->board->if0type; break;
|
|
case 8: o->iftype = c->board->if8type; break;
|
|
}
|
|
if (c->master != c->ifp)
|
|
snprintf (o->master, sizeof(o->master),
|
|
"%s%d", c->master->if_name,
|
|
c->master->if_unit);
|
|
else
|
|
*o->master = 0;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
c = cxchan[unit];
|
|
tp = c->ttyp;
|
|
if (! tp)
|
|
return (EINVAL);
|
|
error = (*linesw[tp->t_line].l_ioctl) (tp, cmd, data, flag, td);
|
|
if (error != ENOIOCTL)
|
|
return (error);
|
|
error = ttioctl (tp, cmd, data, flag);
|
|
if (error != ENOIOCTL)
|
|
return (error);
|
|
|
|
s = spltty ();
|
|
switch (cmd) {
|
|
default:
|
|
splx (s);
|
|
return (ENOTTY);
|
|
case TIOCSBRK: /* Start sending line break */
|
|
c->brk = BRK_SEND;
|
|
if (! (tp->t_state & TS_BUSY))
|
|
cxoproc (tp);
|
|
break;
|
|
case TIOCCBRK: /* Stop sending line break */
|
|
c->brk = BRK_STOP;
|
|
if (! (tp->t_state & TS_BUSY))
|
|
cxoproc (tp);
|
|
break;
|
|
case TIOCSDTR: /* Set DTR */
|
|
cx_chan_dtr (c, 1);
|
|
break;
|
|
case TIOCCDTR: /* Clear DTR */
|
|
cx_chan_dtr (c, 0);
|
|
break;
|
|
case TIOCMSET: /* Set DTR/RTS */
|
|
cx_chan_dtr (c, (*(int*)data & TIOCM_DTR) ? 1 : 0);
|
|
cx_chan_rts (c, (*(int*)data & TIOCM_RTS) ? 1 : 0);
|
|
break;
|
|
case TIOCMBIS: /* Add DTR/RTS */
|
|
if (*(int*)data & TIOCM_DTR) cx_chan_dtr (c, 1);
|
|
if (*(int*)data & TIOCM_RTS) cx_chan_rts (c, 1);
|
|
break;
|
|
case TIOCMBIC: /* Clear DTR/RTS */
|
|
if (*(int*)data & TIOCM_DTR) cx_chan_dtr (c, 0);
|
|
if (*(int*)data & TIOCM_RTS) cx_chan_rts (c, 0);
|
|
break;
|
|
case TIOCMGET: /* Get modem status */
|
|
msv = inb (MSVR(c->chip->port));
|
|
*(int*)data = TIOCM_LE; /* always enabled while open */
|
|
if (msv & MSV_DSR) *(int*)data |= TIOCM_DSR;
|
|
if (msv & MSV_CTS) *(int*)data |= TIOCM_CTS;
|
|
if (msv & MSV_CD) *(int*)data |= TIOCM_CD;
|
|
if (c->dtr) *(int*)data |= TIOCM_DTR;
|
|
if (c->rts) *(int*)data |= TIOCM_RTS;
|
|
break;
|
|
}
|
|
splx (s);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Fill transmitter buffer with data.
|
|
*/
|
|
static void
|
|
cxout (cx_chan_t *c, char b)
|
|
{
|
|
unsigned char *buf, *p, sym;
|
|
unsigned short port = c->chip->port, len = 0, cnt_port, sts_port;
|
|
struct tty *tp = c->ttyp;
|
|
|
|
if (! tp)
|
|
return;
|
|
|
|
/* Choose the buffer. */
|
|
if (b == 'A') {
|
|
buf = c->atbuf;
|
|
cnt_port = ATBCNT(port);
|
|
sts_port = ATBSTS(port);
|
|
} else {
|
|
buf = c->btbuf;
|
|
cnt_port = BTBCNT(port);
|
|
sts_port = BTBSTS(port);
|
|
}
|
|
|
|
/* Is it busy? */
|
|
if (inb (sts_port) & BSTS_OWN24) {
|
|
tp->t_state |= TS_BUSY;
|
|
return;
|
|
}
|
|
|
|
switch (c->brk) {
|
|
case BRK_SEND:
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x81; /* send break */
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x82; /* insert delay */
|
|
*buf++ = 250; /* 1/4 of second */
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x82; /* insert delay */
|
|
*buf++ = 250; /* + 1/4 of second */
|
|
len = 8;
|
|
c->brk = BRK_IDLE;
|
|
break;
|
|
case BRK_STOP:
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x83; /* stop break */
|
|
len = 2;
|
|
c->brk = BRK_IDLE;
|
|
break;
|
|
case BRK_IDLE:
|
|
p = buf;
|
|
if (tp->t_iflag & IXOFF)
|
|
while (RB_LEN (tp->t_out) && p<buf+DMABUFSZ-1) {
|
|
sym = RB_GETC (tp->t_out);
|
|
/* Send XON/XOFF out of band. */
|
|
if (sym == tp->t_cc[VSTOP]) {
|
|
outb (STCR(port), STC_SNDSPC|STC_SSPC_2);
|
|
continue;
|
|
}
|
|
if (sym == tp->t_cc[VSTART]) {
|
|
outb (STCR(port), STC_SNDSPC|STC_SSPC_1);
|
|
continue;
|
|
}
|
|
/* Duplicate NULLs in ETC mode. */
|
|
if (! sym)
|
|
*p++ = 0;
|
|
*p++ = sym;
|
|
}
|
|
else
|
|
while (RB_LEN (tp->t_out) && p<buf+DMABUFSZ-1) {
|
|
sym = RB_GETC (tp->t_out);
|
|
/* Duplicate NULLs in ETC mode. */
|
|
if (! sym)
|
|
*p++ = 0;
|
|
*p++ = sym;
|
|
}
|
|
len = p - buf;
|
|
break;
|
|
}
|
|
|
|
/* Start transmitter. */
|
|
if (len) {
|
|
outw (cnt_port, len);
|
|
outb (sts_port, BSTS_INTR | BSTS_OWN24);
|
|
c->stat->obytes += len;
|
|
tp->t_state |= TS_BUSY;
|
|
print (("cx%d.%d: out %d bytes to %c\n",
|
|
c->board->num, c->num, len, b));
|
|
}
|
|
}
|
|
|
|
void cxoproc (struct tty *tp)
|
|
{
|
|
int unit = UNIT (tp->t_dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
unsigned short port = c->chip->port;
|
|
int s = spltty ();
|
|
|
|
/* Set current channel number */
|
|
outb (CAR(port), c->num & 3);
|
|
|
|
if (! (tp->t_state & (TS_TIMEOUT | TS_TTSTOP))) {
|
|
/* Start transmitter. */
|
|
if (! (inb (CSR(port)) & CSRA_TXEN))
|
|
cx_cmd (port, CCR_ENTX);
|
|
|
|
/* Determine the buffer order. */
|
|
if (inb (DMABSTS(port)) & DMABSTS_NTBUF) {
|
|
cxout (c, 'B');
|
|
cxout (c, 'A');
|
|
} else {
|
|
cxout (c, 'A');
|
|
cxout (c, 'B');
|
|
}
|
|
}
|
|
#ifndef TS_ASLEEP /* FreeBSD some time after 2.0.5 */
|
|
ttwwakeup(tp);
|
|
#else
|
|
if (RB_LEN (tp->t_out) <= tp->t_lowat) {
|
|
if (tp->t_state & TS_ASLEEP) {
|
|
tp->t_state &= ~TS_ASLEEP;
|
|
wakeup(TSA_OLOWAT(tp));
|
|
}
|
|
selwakeup(&tp->t_wsel);
|
|
}
|
|
#endif
|
|
splx (s);
|
|
}
|
|
|
|
static int
|
|
cxparam (struct tty *tp, struct termios *t)
|
|
{
|
|
int unit = UNIT (tp->t_dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
unsigned short port = c->chip->port;
|
|
int clock, period, s;
|
|
cx_cor1_async_t cor1;
|
|
|
|
if (t->c_ospeed == 0) {
|
|
/* Clear DTR and RTS. */
|
|
s = spltty ();
|
|
cx_chan_dtr (c, 0);
|
|
cx_chan_rts (c, 0);
|
|
splx (s);
|
|
print (("cx%d.%d: cxparam (hangup)\n", c->board->num, c->num));
|
|
return (0);
|
|
}
|
|
print (("cx%d.%d: cxparam\n", c->board->num, c->num));
|
|
|
|
/* Check requested parameters. */
|
|
if (t->c_ospeed < 300 || t->c_ospeed > 256*1024)
|
|
return(EINVAL);
|
|
if (t->c_ispeed && (t->c_ispeed < 300 || t->c_ispeed > 256*1024))
|
|
return(EINVAL);
|
|
|
|
/* And copy them to tty and channel structures. */
|
|
c->rxbaud = tp->t_ispeed = t->c_ispeed;
|
|
c->txbaud = tp->t_ospeed = t->c_ospeed;
|
|
tp->t_cflag = t->c_cflag;
|
|
|
|
/* Set character length and parity mode. */
|
|
BYTE cor1 = 0;
|
|
switch (t->c_cflag & CSIZE) {
|
|
default:
|
|
case CS8: cor1.charlen = 7; break;
|
|
case CS7: cor1.charlen = 6; break;
|
|
case CS6: cor1.charlen = 5; break;
|
|
case CS5: cor1.charlen = 4; break;
|
|
}
|
|
if (t->c_cflag & PARENB) {
|
|
cor1.parmode = PARM_NORMAL;
|
|
cor1.ignpar = 0;
|
|
cor1.parity = (t->c_cflag & PARODD) ? PAR_ODD : PAR_EVEN;
|
|
} else {
|
|
cor1.parmode = PARM_NOPAR;
|
|
cor1.ignpar = 1;
|
|
}
|
|
|
|
/* Enable/disable hardware CTS. */
|
|
c->aopt.cor2.ctsae = (t->c_cflag & CRTSCTS) ? 1 : 0;
|
|
/* Handle DSR as CTS. */
|
|
c->aopt.cor2.dsrae = (t->c_cflag & CRTSCTS) ? 1 : 0;
|
|
/* Enable extended transmit command mode.
|
|
* Unfortunately, there is no other method for sending break. */
|
|
c->aopt.cor2.etc = 1;
|
|
/* Enable/disable hardware XON/XOFF. */
|
|
c->aopt.cor2.ixon = (t->c_iflag & IXON) ? 1 : 0;
|
|
c->aopt.cor2.ixany = (t->c_iflag & IXANY) ? 1 : 0;
|
|
|
|
/* Set the number of stop bits. */
|
|
if (t->c_cflag & CSTOPB)
|
|
c->aopt.cor3.stopb = STOPB_2;
|
|
else
|
|
c->aopt.cor3.stopb = STOPB_1;
|
|
/* Disable/enable passing XON/XOFF chars to the host. */
|
|
c->aopt.cor3.scde = (t->c_iflag & IXON) ? 1 : 0;
|
|
c->aopt.cor3.flowct = (t->c_iflag & IXON) ? FLOWCC_NOTPASS : FLOWCC_PASS;
|
|
|
|
c->aopt.schr1 = t->c_cc[VSTART]; /* XON */
|
|
c->aopt.schr2 = t->c_cc[VSTOP]; /* XOFF */
|
|
|
|
/* Set current channel number. */
|
|
s = spltty ();
|
|
outb (CAR(port), c->num & 3);
|
|
|
|
/* Set up receiver clock values. */
|
|
cx_clock (c->chip->oscfreq, c->rxbaud, &clock, &period);
|
|
c->opt.rcor.clk = clock;
|
|
outb (RCOR(port), BYTE c->opt.rcor);
|
|
outb (RBPR(port), period);
|
|
|
|
/* Set up transmitter clock values. */
|
|
cx_clock (c->chip->oscfreq, c->txbaud, &clock, &period);
|
|
c->opt.tcor.clk = clock;
|
|
c->opt.tcor.ext1x = 0;
|
|
outb (TCOR(port), BYTE c->opt.tcor);
|
|
outb (TBPR(port), period);
|
|
|
|
outb (COR2(port), BYTE c->aopt.cor2);
|
|
outb (COR3(port), BYTE c->aopt.cor3);
|
|
outb (SCHR1(port), c->aopt.schr1);
|
|
outb (SCHR2(port), c->aopt.schr2);
|
|
|
|
if (BYTE c->aopt.cor1 != BYTE cor1) {
|
|
BYTE c->aopt.cor1 = BYTE cor1;
|
|
outb (COR1(port), BYTE c->aopt.cor1);
|
|
/* Any change to COR1 require reinitialization. */
|
|
/* Unfortunately, it may cause transmitter glitches... */
|
|
cx_cmd (port, CCR_INITCH);
|
|
}
|
|
splx (s);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Stop output on a line
|
|
*/
|
|
void cxstop (struct tty *tp, int flag)
|
|
{
|
|
cx_chan_t *c = cxchan[UNIT(tp->t_dev)];
|
|
unsigned short port = c->chip->port;
|
|
int s = spltty ();
|
|
|
|
if (tp->t_state & TS_BUSY) {
|
|
print (("cx%d.%d: cxstop\n", c->board->num, c->num));
|
|
|
|
/* Set current channel number */
|
|
outb (CAR(port), c->num & 3);
|
|
|
|
/* Stop transmitter */
|
|
cx_cmd (port, CCR_DISTX);
|
|
}
|
|
splx (s);
|
|
}
|
|
|
|
/*
|
|
* Handle receive interrupts, including receive errors and
|
|
* receive timeout interrupt.
|
|
*/
|
|
int cxrinta (cx_chan_t *c)
|
|
{
|
|
unsigned short port = c->chip->port;
|
|
unsigned short len = 0, risr = inw (RISR(port)), reoir = 0;
|
|
struct tty *tp = c->ttyp;
|
|
|
|
/* Compute optimal receiver buffer length. */
|
|
int rbsz = (c->rxbaud + 800 - 1) / 800 * 2;
|
|
if (rbsz < 4)
|
|
rbsz = 4;
|
|
else if (rbsz > DMABUFSZ)
|
|
rbsz = DMABUFSZ;
|
|
|
|
if (risr & RISA_TIMEOUT) {
|
|
unsigned long rcbadr = (unsigned short) inw (RCBADRL(port)) |
|
|
(long) inw (RCBADRU(port)) << 16;
|
|
unsigned char *buf = 0;
|
|
unsigned short cnt_port = 0, sts_port = 0;
|
|
if (rcbadr >= c->brphys && rcbadr < c->brphys+DMABUFSZ) {
|
|
buf = c->brbuf;
|
|
len = rcbadr - c->brphys;
|
|
cnt_port = BRBCNT(port);
|
|
sts_port = BRBSTS(port);
|
|
} else if (rcbadr >= c->arphys && rcbadr < c->arphys+DMABUFSZ) {
|
|
buf = c->arbuf;
|
|
len = rcbadr - c->arphys;
|
|
cnt_port = ARBCNT(port);
|
|
sts_port = ARBSTS(port);
|
|
} else
|
|
printf ("cx%d.%d: timeout: invalid buffer address\n",
|
|
c->board->num, c->num);
|
|
|
|
if (len) {
|
|
print (("cx%d.%d: async receive timeout (%d bytes), risr=%b, arbsts=%b, brbsts=%b\n",
|
|
c->board->num, c->num, len, risr, RISA_BITS,
|
|
inb (ARBSTS(port)), BSTS_BITS, inb (BRBSTS(port)), BSTS_BITS));
|
|
c->stat->ibytes += len;
|
|
if (tp && (tp->t_state & TS_ISOPEN)) {
|
|
int i;
|
|
int (*rint)(int, struct tty *) =
|
|
linesw[tp->t_line].l_rint;
|
|
|
|
for (i=0; i<len; ++i)
|
|
(*rint) (buf[i], tp);
|
|
}
|
|
|
|
/* Restart receiver. */
|
|
outw (cnt_port, rbsz);
|
|
outb (sts_port, BSTS_OWN24);
|
|
}
|
|
return (REOI_TERMBUFF);
|
|
}
|
|
|
|
print (("cx%d.%d: async receive interrupt, risr=%b, arbsts=%b, brbsts=%b\n",
|
|
c->board->num, c->num, risr, RISA_BITS,
|
|
inb (ARBSTS(port)), BSTS_BITS, inb (BRBSTS(port)), BSTS_BITS));
|
|
|
|
if (risr & RIS_BUSERR) {
|
|
printf ("cx%d.%d: receive bus error\n", c->board->num, c->num);
|
|
++c->stat->ierrs;
|
|
}
|
|
if (risr & (RIS_OVERRUN | RISA_PARERR | RISA_FRERR | RISA_BREAK)) {
|
|
int err = 0;
|
|
|
|
if (risr & RISA_PARERR)
|
|
err |= TTY_PE;
|
|
if (risr & RISA_FRERR)
|
|
err |= TTY_FE;
|
|
#ifdef TTY_OE
|
|
if (risr & RIS_OVERRUN)
|
|
err |= TTY_OE;
|
|
#endif
|
|
#ifdef TTY_BI
|
|
if (risr & RISA_BREAK)
|
|
err |= TTY_BI;
|
|
#endif
|
|
print (("cx%d.%d: receive error %x\n", c->board->num, c->num, err));
|
|
if (tp && (tp->t_state & TS_ISOPEN))
|
|
(*linesw[tp->t_line].l_rint) (err, tp);
|
|
++c->stat->ierrs;
|
|
}
|
|
|
|
/* Discard exception characters. */
|
|
if ((risr & RISA_SCMASK) && tp && (tp->t_iflag & IXON))
|
|
reoir |= REOI_DISCEXC;
|
|
|
|
/* Handle received data. */
|
|
if ((risr & RIS_EOBUF) && tp && (tp->t_state & TS_ISOPEN)) {
|
|
int (*rint)(int, struct tty *) = linesw[tp->t_line].l_rint;
|
|
unsigned char *buf;
|
|
int i;
|
|
|
|
len = (risr & RIS_BB) ? inw(BRBCNT(port)) : inw(ARBCNT(port));
|
|
|
|
print (("cx%d.%d: async: %d bytes received\n",
|
|
c->board->num, c->num, len));
|
|
c->stat->ibytes += len;
|
|
|
|
buf = (risr & RIS_BB) ? c->brbuf : c->arbuf;
|
|
for (i=0; i<len; ++i)
|
|
(*rint) (buf[i], tp);
|
|
}
|
|
|
|
/* Restart receiver. */
|
|
if (! (inb (ARBSTS(port)) & BSTS_OWN24)) {
|
|
outw (ARBCNT(port), rbsz);
|
|
outb (ARBSTS(port), BSTS_OWN24);
|
|
}
|
|
if (! (inb (BRBSTS(port)) & BSTS_OWN24)) {
|
|
outw (BRBCNT(port), rbsz);
|
|
outb (BRBSTS(port), BSTS_OWN24);
|
|
}
|
|
return (reoir);
|
|
}
|
|
|
|
/*
|
|
* Handle transmit interrupt.
|
|
*/
|
|
void cxtinta (cx_chan_t *c)
|
|
{
|
|
struct tty *tp = c->ttyp;
|
|
unsigned short port = c->chip->port;
|
|
unsigned char tisr = inb (TISR(port));
|
|
|
|
print (("cx%d.%d: async transmit interrupt, tisr=%b, atbsts=%b, btbsts=%b\n",
|
|
c->board->num, c->num, tisr, TIS_BITS,
|
|
inb (ATBSTS(port)), BSTS_BITS, inb (BTBSTS(port)), BSTS_BITS));
|
|
|
|
if (tisr & TIS_BUSERR) {
|
|
printf ("cx%d.%d: transmit bus error\n",
|
|
c->board->num, c->num);
|
|
++c->stat->oerrs;
|
|
} else if (tisr & TIS_UNDERRUN) {
|
|
printf ("cx%d.%d: transmit underrun error\n",
|
|
c->board->num, c->num);
|
|
++c->stat->oerrs;
|
|
}
|
|
if (tp) {
|
|
tp->t_state &= ~(TS_BUSY | TS_FLUSH);
|
|
if (tp->t_line)
|
|
(*linesw[tp->t_line].l_start) (tp);
|
|
else
|
|
cxoproc (tp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle modem interrupt.
|
|
*/
|
|
void cxmint (cx_chan_t *c)
|
|
{
|
|
unsigned short port = c->chip->port;
|
|
unsigned char misr = inb (MISR(port));
|
|
unsigned char msvr = inb (MSVR(port));
|
|
struct tty *tp = c->ttyp;
|
|
|
|
if (c->mode != M_ASYNC) {
|
|
printf ("cx%d.%d: unexpected modem interrupt, misr=%b, msvr=%b\n",
|
|
c->board->num, c->num, misr, MIS_BITS, msvr, MSV_BITS);
|
|
return;
|
|
}
|
|
print (("cx%d.%d: modem interrupt, misr=%b, msvr=%b\n",
|
|
c->board->num, c->num, misr, MIS_BITS, msvr, MSV_BITS));
|
|
|
|
/* Ignore DSR events. */
|
|
/* Ignore RTC/CTS events, handled by hardware. */
|
|
/* Handle carrier detect/loss. */
|
|
if (tp && (misr & MIS_CCD))
|
|
(*linesw[tp->t_line].l_modem) (tp, (msvr & MSV_CD) != 0);
|
|
}
|
|
|
|
/*
|
|
* Recover after lost transmit interrupts.
|
|
*/
|
|
void cxtimeout (void *a)
|
|
{
|
|
cx_board_t *b;
|
|
cx_chan_t *c;
|
|
struct tty *tp;
|
|
int s;
|
|
|
|
for (b=cxboard; b<cxboard+NCX; ++b)
|
|
for (c=b->chan; c<b->chan+NCHAN; ++c) {
|
|
tp = c->ttyp;
|
|
if (c->type==T_NONE || c->mode!=M_ASYNC || !tp)
|
|
continue;
|
|
s = spltty ();
|
|
if (tp->t_state & TS_BUSY) {
|
|
tp->t_state &= ~TS_BUSY;
|
|
if (tp->t_line)
|
|
(*linesw[tp->t_line].l_start) (tp);
|
|
else
|
|
cxoproc (tp);
|
|
}
|
|
splx (s);
|
|
}
|
|
timeout (cxtimeout, 0, hz*5);
|
|
}
|
|
|
|
|
|
static void cx_drvinit(void *unused)
|
|
{
|
|
|
|
cdevsw_add(&cx_cdevsw);
|
|
}
|
|
|
|
SYSINIT(cxdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,cx_drvinit,NULL)
|