1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
freebsd/sys/isa/fdreg.h
Joerg Wunsch cb38bb6c36 Increase the PIO timeout to approximately the value it used to have
before rev 1.229 (~ 100 ms).  According to bde, some (old) broken
hardware could require it.  In order to make timing more accurate than
what could be achieved with a loop around DELAY(1), increase loop
timing after the initial ~ 1 ms.

Also, move the declaration of FDSTS_TIMEOUT out from fdreg.h into fd.c
where it actually belongs to.

MFC after:	2 days
2002-05-12 15:24:21 +00:00

72 lines
3.0 KiB
C

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)fdreg.h 7.1 (Berkeley) 5/9/91
* $FreeBSD$
*/
/*
* AT floppy controller registers and bitfields
*/
/* uses NEC765 controller */
#include <dev/ic/nec765.h>
/* registers */
#define FDOUT 2 /* Digital Output Register (W) */
#define FDO_FDSEL 0x03 /* floppy device select */
#define FDO_FRST 0x04 /* floppy controller reset */
#define FDO_FDMAEN 0x08 /* enable floppy DMA and Interrupt */
#define FDO_MOEN0 0x10 /* motor enable drive 0 */
#define FDO_MOEN1 0x20 /* motor enable drive 1 */
#define FDO_MOEN2 0x40 /* motor enable drive 2 */
#define FDO_MOEN3 0x80 /* motor enable drive 3 */
#define FDSTS 4 /* NEC 765 Main Status Register (R) */
#define FDDATA 5 /* NEC 765 Data Register (R/W) */
#define FDCTL 7 /* Control Register (W) */
/*
* The definitions for FDC_500KBPS etc. have been moved out to <sys/fdcio.h>
* since they need to be visible in userland. They cover the lower two bits
* of FDCTL when used for output.
*/
/*
* this is the secret PIO data port (offset from base)
*/
#define FDC_YE_DATAPORT 6
#define FDIN 7 /* Digital Input Register (R) */
#define FDI_DCHG 0x80 /* diskette has been changed */
/* requires drive and motor being selected */
/* is cleared by any step pulse to drive */