1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
freebsd/contrib/tcpdump/print-cip.c
2001-04-03 07:45:48 +00:00

160 lines
3.8 KiB
C

/*
* Marko Kiiskila carnil@cs.tut.fi
*
* Tampere University of Technology - Telecommunications Laboratory
*
* Permission to use, copy, modify and distribute this
* software and its documentation is hereby granted,
* provided that both the copyright notice and this
* permission notice appear in all copies of the software,
* derivative works or modified versions, and any portions
* thereof, that both notices appear in supporting
* documentation, and that the use of this software is
* acknowledged in any publications resulting from using
* the software.
*
* TUT ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION AND DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
* SOFTWARE.
*
*/
#ifndef lint
static const char rcsid[] =
"@(#) $Header: /tcpdump/master/tcpdump/print-cip.c,v 1.11 2000/12/22 22:45:10 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <sys/param.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <stdio.h>
#include <pcap.h>
#include "interface.h"
#include "addrtoname.h"
#include "ethertype.h"
#include "ether.h"
const u_char *packetp;
const u_char *snapend;
#define RFC1483LLC_LEN 8
static unsigned char rfcllc[] = {
0xaa, /* DSAP: non-ISO */
0xaa, /* SSAP: non-ISO */
0x03, /* Ctrl: Unnumbered Information Command PDU */
0x00, /* OUI: EtherType */
0x00,
0x00 };
static inline void
cip_print(register const u_char *bp, int length)
{
int i;
if (memcmp(rfcllc, bp, sizeof(rfcllc))) {
if (qflag) {
for (i = 0;i < RFC1483LLC_LEN; i++)
(void)printf("%2.2x ",bp[i]);
} else {
for (i = 0;i < RFC1483LLC_LEN - 2; i++)
(void)printf("%2.2x ",bp[i]);
etherproto_string(((u_short*)bp)[3]);
}
} else {
if (qflag)
(void)printf("(null encapsulation)");
else {
(void)printf("(null encap)");
etherproto_string(ETHERTYPE_IP);
}
}
}
/*
* This is the top level routine of the printer. 'p' is the points
* to the raw header of the packet, 'tvp' is the timestamp,
* 'length' is the length of the packet off the wire, and 'caplen'
* is the number of bytes actually captured.
*/
void
cip_if_print(u_char *user, const struct pcap_pkthdr *h, const u_char *p)
{
int caplen = h->caplen;
int length = h->len;
u_short ether_type;
u_short extracted_ethertype;
u_short *bp;
ts_print(&h->ts);
if (memcmp(rfcllc, p, sizeof(rfcllc))==0 && caplen < RFC1483LLC_LEN) {
printf("[|cip]");
goto out;
}
if (eflag)
cip_print(p, length);
/*
* Some printers want to get back at the ethernet addresses,
* and/or check that they're not walking off the end of the packet.
* Rather than pass them all the way down, we set these globals.
*/
packetp = p;
snapend = p + caplen;
if (memcmp(rfcllc, p, sizeof(rfcllc))==0) {
length -= RFC1483LLC_LEN;
caplen -= RFC1483LLC_LEN;
bp = (u_short *)p;
p += RFC1483LLC_LEN;
ether_type = ntohs(bp[3]);
} else {
ether_type = ETHERTYPE_IP;
bp = (u_short *)p;
}
/*
* Is it (gag) an 802.3 encapsulation?
*/
extracted_ethertype = 0;
if (ether_type < ETHERMTU) {
/* Try to print the LLC-layer header & higher layers */
if (llc_print(p, length, caplen, NULL, NULL,
&extracted_ethertype)==0) {
/* ether_type not known, print raw packet */
if (!eflag)
cip_print((u_char *)bp, length + RFC1483LLC_LEN);
if (extracted_ethertype) {
printf("(LLC %s) ",
etherproto_string(htons(extracted_ethertype)));
}
if (!xflag && !qflag)
default_print(p, caplen);
}
} else if (ether_encap_print(ether_type, p, length, caplen,
&extracted_ethertype) == 0) {
/* ether_type not known, print raw packet */
if (!eflag)
cip_print((u_char *)bp, length + RFC1483LLC_LEN);
if (!xflag && !qflag)
default_print(p, caplen);
}
if (xflag)
default_print(p, caplen);
out:
putchar('\n');
}