1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-28 11:57:28 +00:00
freebsd/sys/conf/kern.post.mk
Alexander Leidinger 21edb039c6 WITH_CTF can now be specified in src.conf (not recommended, there
are some problems with static executables), make.conf (would also
affect ports which do not use GNU make and do not override the
compile targets) or in the kernel config (via "makeoptions
WITH_CTF=yes").

Additional (related) changes:
 - propagate WITH_CTF to module builds
 - do not add -g to the linker flags, it's a noop there anyway
   (at least according to the man page of ld)
 - do not add -g to CFLAGS unconditionally
   we need to have a look if it is really needed (IMO not) or if there
   is a way to add it only when WITH_CTF is used

Note: ctfconvert / ctfmerge lines will not appear in the build output,
to protect the innocent (those which do not build with WITH_CTF would
see the shell-test and may think WITH_CTF is used).

Reviewed by:	imp, jhb, scottl (earlier version)
Discussed on:	arch@
2010-04-02 06:55:31 +00:00

269 lines
8.0 KiB
Makefile

# $FreeBSD$
# Part of a unified Makefile for building kernels. This part includes all
# the definitions that need to be after all the % directives except %RULES
# and ones that act like they are part of %RULES.
#
# Most make variables should not be defined in this file. Instead, they
# should be defined in the kern.pre.mk so that port makefiles can
# override or augment them.
# In case the config had a makeoptions DESTDIR...
.if defined(DESTDIR)
MKMODULESENV+= DESTDIR="${DESTDIR}"
.endif
SYSDIR?= ${S:C;^[^/];${.CURDIR}/&;}
MKMODULESENV+= KERNBUILDDIR="${.CURDIR}" SYSDIR="${SYSDIR}"
.if defined(CONF_CFLAGS)
MKMODULESENV+= CONF_CFLAGS="${CONF_CFLAGS}"
.endif
.if defined(WITH_CTF)
MKMODULESENV+= WITH_CTF="${WITH_CTF}"
.endif
.MAIN: all
.for target in all clean cleandepend cleandir clobber depend install \
obj reinstall tags
${target}: kernel-${target}
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules)
${target}: modules-${target}
modules-${target}:
cd $S/modules; ${MKMODULESENV} ${MAKE} \
${target:S/^reinstall$/install/:S/^clobber$/cleandir/}
.endif
.endfor
# Handle out of tree ports
.if !defined(NO_MODULES) && defined(PORTS_MODULES)
PORTSMODULESENV=SYSDIR=${SYSDIR}
.for __target in all install reinstall clean
${__target}: ports-${__target}
ports-${__target}:
.for __i in ${PORTS_MODULES}
cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B ${__target:C/install/deinstall reinstall/:C/reinstall/deinstall reinstall/}
.endfor
.endfor
.endif
.ORDER: kernel-install modules-install
kernel-all: ${KERNEL_KO} ${KERNEL_EXTRA}
kernel-cleandir: kernel-clean kernel-cleandepend
kernel-clobber:
find . -maxdepth 1 ! -type d ! -name version -delete
kernel-obj:
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules)
modules: modules-all
.if !defined(NO_MODULES_OBJ)
modules-all modules-depend: modules-obj
.endif
.endif
.if !defined(DEBUG)
FULLKERNEL= ${KERNEL_KO}
.else
FULLKERNEL= ${KERNEL_KO}.debug
${KERNEL_KO}: ${FULLKERNEL} ${KERNEL_KO}.symbols
${OBJCOPY} --strip-debug --add-gnu-debuglink=${KERNEL_KO}.symbols\
${FULLKERNEL} ${.TARGET}
${KERNEL_KO}.symbols: ${FULLKERNEL}
${OBJCOPY} --only-keep-debug ${FULLKERNEL} ${.TARGET}
install.debug reinstall.debug: gdbinit
cd ${.CURDIR}; ${MAKE} ${.TARGET:R}
# Install gdbinit files for kernel debugging.
gdbinit:
grep -v '# XXX' ${S}/../tools/debugscripts/dot.gdbinit | \
sed "s:MODPATH:${.OBJDIR}/modules:" > .gdbinit
cp ${S}/../tools/debugscripts/gdbinit.kernel ${.CURDIR}
.if exists(${S}/../tools/debugscripts/gdbinit.${MACHINE_ARCH})
cp ${S}/../tools/debugscripts/gdbinit.${MACHINE_ARCH} \
${.CURDIR}/gdbinit.machine
.endif
.endif
${FULLKERNEL}: ${SYSTEM_DEP} vers.o
@rm -f ${.TARGET}
@echo linking ${.TARGET}
${SYSTEM_LD}
@${SYSTEM_CTFMERGE}
.if !defined(DEBUG)
${OBJCOPY} --strip-debug ${.TARGET}
.endif
${SYSTEM_LD_TAIL}
.if defined(MFS_IMAGE)
@sh ${S}/tools/embed_mfs.sh ${FULLKERNEL} ${MFS_IMAGE}
.endif
.if !exists(${.OBJDIR}/.depend)
${SYSTEM_OBJS}: assym.s vnode_if.h ${BEFORE_DEPEND:M*.h} ${MFILES:T:S/.m$/.h/}
.endif
LNFILES= ${CFILES:T:S/.c$/.ln/}
.for mfile in ${MFILES}
# XXX the low quality .m.o rules gnerated by config are normally used
# instead of the .m.c rules here.
${mfile:T:S/.m$/.c/}: ${mfile}
${AWK} -f $S/tools/makeobjops.awk ${mfile} -c
${mfile:T:S/.m$/.h/}: ${mfile}
${AWK} -f $S/tools/makeobjops.awk ${mfile} -h
.endfor
kernel-clean:
rm -f *.o *.so *.So *.ko *.s eddep errs \
${FULLKERNEL} ${KERNEL_KO} ${KERNEL_KO}.symbols \
linterrs makelinks tags vers.c \
vnode_if.c vnode_if.h vnode_if_newproto.h vnode_if_typedef.h \
${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \
${CLEAN}
lint: ${LNFILES}
${LINT} ${LINTKERNFLAGS} ${CFLAGS:M-[DILU]*} ${.ALLSRC} 2>&1 | \
tee -a linterrs
# This is a hack. BFD "optimizes" away dynamic mode if there are no
# dynamic references. We could probably do a '-Bforcedynamic' mode like
# in the a.out ld. For now, this works.
HACK_EXTRA_FLAGS?= -shared
hack.So: Makefile
:> hack.c
${CC} ${HACK_EXTRA_FLAGS} -nostdlib hack.c -o hack.So
rm -f hack.c
# This rule stops ./assym.s in .depend from causing problems.
./assym.s: assym.s
assym.s: $S/kern/genassym.sh genassym.o
NM='${NM}' sh $S/kern/genassym.sh genassym.o > ${.TARGET}
genassym.o: $S/$M/$M/genassym.c
${CC} -c ${CFLAGS:N-fno-common} $S/$M/$M/genassym.c
${SYSTEM_OBJS} genassym.o vers.o: opt_global.h
kernel-depend: .depend
# The argument list can be very long, so use make -V and xargs to
# pass it to mkdep.
SRCS= assym.s vnode_if.h ${BEFORE_DEPEND} ${CFILES} \
${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \
${MFILES:T:S/.m$/.h/}
.depend: .PRECIOUS ${SRCS}
rm -f .newdep
${MAKE} -V CFILES -V SYSTEM_CFILES -V GEN_CFILES | \
MKDEP_CPP="${CC} -E" CC="${CC}" xargs mkdep -a -f .newdep ${CFLAGS}
${MAKE} -V SFILES | \
MKDEP_CPP="${CC} -E" xargs mkdep -a -f .newdep ${ASM_CFLAGS}
rm -f .depend
mv .newdep .depend
_ILINKS= machine
.if ${MACHINE} != ${MACHINE_ARCH}
_ILINKS+= ${MACHINE_ARCH}
.endif
# Ensure that the link exists without depending on it when it exists.
.for _link in ${_ILINKS}
.if !exists(${.OBJDIR}/${_link})
${SRCS}: ${_link}
.endif
.endfor
${_ILINKS}:
@case ${.TARGET} in \
machine) \
path=${S}/${MACHINE}/include ;; \
${MACHINE_ARCH}) \
path=${S}/${MACHINE_ARCH}/include ;; \
esac ; \
${ECHO} ${.TARGET} "->" $$path ; \
ln -s $$path ${.TARGET}
# .depend needs include links so we remove them only together.
kernel-cleandepend:
rm -f .depend ${_ILINKS}
links:
egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
${MAKE} -V CFILES | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks; rm -f dontlink
kernel-tags:
@[ -f .depend ] || { echo "you must make depend first"; exit 1; }
sh $S/conf/systags.sh
kernel-install:
@if [ ! -f ${KERNEL_KO} ] ; then \
echo "You must build a kernel first." ; \
exit 1 ; \
fi
.if exists(${DESTDIR}${KODIR})
-thiskernel=`sysctl -n kern.bootfile` ; \
if [ ! "`dirname "$$thiskernel"`" -ef ${DESTDIR}${KODIR} ] ; then \
chflags -R noschg ${DESTDIR}${KODIR} ; \
rm -rf ${DESTDIR}${KODIR} ; \
else \
if [ -d ${DESTDIR}${KODIR}.old ] ; then \
chflags -R noschg ${DESTDIR}${KODIR}.old ; \
rm -rf ${DESTDIR}${KODIR}.old ; \
fi ; \
mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old ; \
sysctl kern.bootfile=${DESTDIR}${KODIR}.old/"`basename "$$thiskernel"`" ; \
fi
.endif
mkdir -p ${DESTDIR}${KODIR}
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}
.if defined(DEBUG) && !defined(INSTALL_NODEBUG)
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.symbols ${DESTDIR}${KODIR}
.endif
.if defined(KERNEL_EXTRA_INSTALL)
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_EXTRA_INSTALL} ${DESTDIR}${KODIR}
.endif
kernel-reinstall:
@-chflags -R noschg ${DESTDIR}${KODIR}
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}
.if defined(DEBUG) && !defined(INSTALL_NODEBUG)
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.symbols ${DESTDIR}${KODIR}
.endif
config.o env.o hints.o vers.o vnode_if.o:
${NORMAL_C}
@[ -z "${CTFCONVERT}" -o -n "${NO_CTF}" ] || ${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
config.ln env.ln hints.ln vers.ln vnode_if.ln:
${NORMAL_LINT}
vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP}
MAKE=${MAKE} sh $S/conf/newvers.sh ${KERN_IDENT}
vnode_if.c: $S/tools/vnode_if.awk $S/kern/vnode_if.src
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -c
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: $S/tools/vnode_if.awk \
$S/kern/vnode_if.src
vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -h
vnode_if_newproto.h:
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -p
vnode_if_typedef.h:
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -q
# XXX strictly, everything depends on Makefile because changes to ${PROF}
# only appear there, but we don't handle that.
.include "kern.mk"