Matt Jacob 1d575e0fd3 Correctly put the place to mark EOP where we actually do the packet ... transmission- this handles the odd and rare case of a list terminating with a zero length mbuf.		2000-01-23 03:19:49 +00:00
..
adw_pci.c
alpm.c	Remove the 'ivars' arguement to device_add_child() and	1999-12-03 08:41:24 +00:00
amd.c	The error status for a scsi status error is "CAM_SCSI_STATUS_ERROR", not 0.	2000-01-14 03:39:30 +00:00
amd.h
cy_pci.c
cy_pcireg.h
dc21040reg.h
ida_pci.c
ide_pci.c	Remove some horrible #if 0'd code that has no hope of working now. It	1999-12-12 14:47:23 +00:00
ide_pcireg.h
if_ar_p.c
if_dc.c	Add support for the Davicom DM9102A 10/100 ethernet controller chip.	2000-01-19 19:03:08 +00:00
if_dcreg.h	Add support for the Davicom DM9102A 10/100 ethernet controller chip.	2000-01-19 19:03:08 +00:00
if_de.c
if_devar.h
if_en_pci.c
if_fxp.c
if_fxpreg.h
if_fxpvar.h
if_lnc_p.c
if_mn.c	Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"	1999-12-29 05:07:58 +00:00
if_rl.c	Fix a small typo in the comments.	1999-12-28 06:04:29 +00:00
if_rlreg.h
if_sf.c	Modify the Adaptec "starfire" driver to reset the PHY on the MII bus	1999-12-05 20:02:45 +00:00
if_sfreg.h	Modify the Adaptec "starfire" driver to reset the PHY on the MII bus	1999-12-05 20:02:45 +00:00
if_sis.c
if_sisreg.h
if_sk.c
if_skreg.h
if_sr_p.c
if_ste.c	Spruce up the Sundance ST201 driver:	1999-12-07 20:14:42 +00:00
if_stereg.h	Spruce up the Sundance ST201 driver:	1999-12-07 20:14:42 +00:00
if_ti.c	Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet	2000-01-18 00:26:29 +00:00
if_tireg.h	Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet	2000-01-18 00:26:29 +00:00
if_tl.c	Fix the tl driver so it doesn't run off the end of the RX descriptor list	2000-01-15 20:14:49 +00:00
if_tlreg.h
if_tx.c	Change incorrect NULLs to 0s	1999-12-21 11:14:12 +00:00
if_txvar.h
if_vr.c
if_vrreg.h
if_wb.c
if_wbreg.h
if_wx.c	Correctly put the place to mark EOP where we actually do the packet	2000-01-23 03:19:49 +00:00
if_wxreg.h	Add in a define for the optimal cache line size.	2000-01-23 01:39:13 +00:00
if_wxvar.h	add PREVIOUS index macro for transmit side	2000-01-23 03:18:14 +00:00
if_xl.c	Close PR# 15986: issue an RX reset command when initializing the interface,	2000-01-09 21:12:59 +00:00
if_xlreg.h	Update the xl driver to recognize yet another 3c905B/3c905C class NIC:	1999-12-16 18:33:57 +00:00
intpm.c	Remove the 'ivars' arguement to device_add_child() and	1999-12-03 08:41:24 +00:00
intpmreg.h
isp_pci.c	Remove compile warning not seen when compiling with target mode enabled.	2000-01-15 07:06:44 +00:00
locate.pl
meteor_reg.h
meteor.c
ncr.c	Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"	1999-12-29 05:07:58 +00:00
ncrreg.h
ohci_pci.c	Add ID for the AMD-756 OHCI controller	2000-01-21 10:46:29 +00:00
pccbb.c	Initial import of cardbus bridge driver (cbb) from the latest	1999-11-18 07:14:54 +00:00
pccbbreg.h	Initial import of cardbus bridge driver (cbb) from the latest	1999-11-18 07:14:54 +00:00
pccbbvar.h	Initial import of cardbus bridge driver (cbb) from the latest	1999-11-18 07:14:54 +00:00
pci_compat.c	Zap pci_map_dense() and pci_map_bwx() - they were for compatability but	2000-01-05 16:40:10 +00:00
pci_if.m
pci.c	Show the port/mem/irq of pci devices too.	2000-01-08 10:12:21 +00:00
pcic_p.c	Fill in the blanks for some of the Texas Instruments cardbus controllers.	1999-12-31 07:22:24 +00:00
pcic_p.h	Fill in the blanks for some of the Texas Instruments cardbus controllers.	1999-12-31 07:22:24 +00:00
pcireg.h	Added PCIR_BIOS (0x30).	2000-01-10 12:53:19 +00:00
pcisupport.c	Remove duplicate DEC 21050 PCI-PCI bridge (0x00011011)	2000-01-13 08:40:10 +00:00
pcivar.h	Clean up the cfgmech/pci_mechanism debris. The reason for the existance	2000-01-08 08:31:24 +00:00
scsiiom.c
simos.c
simos.h
ti_fw2.h
ti_fw.h
uhci_pci.c	Properly remove interrupts if initialisation fails.	2000-01-20 21:36:07 +00:00
xmaciireg.h
xrpu.c