1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-16 10:20:30 +00:00
freebsd/sys/pccard/pccard.c
Warner Losh 923a651ddf Remove debug printfs and Debugger() calls.
Add support for memory mapping

This should allow pccard that need memory mapping to work, but I don't
have one to test against.
1999-10-25 23:17:24 +00:00

754 lines
19 KiB
C

/*
* pccard.c - Interface code for PC-CARD controllers.
*
* June 1995, Andrew McRae (andrew@mega.com.au)
*-------------------------------------------------------------------------
*
* Copyright (c) 1995 Andrew McRae. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_pcic.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/malloc.h>
#include <sys/select.h>
#include <sys/sysctl.h>
#include <sys/conf.h>
#include <sys/module.h>
#include <sys/uio.h>
#include <sys/poll.h>
#include <sys/interrupt.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/icu.h>
#include <i386/isa/intr_machdep.h>
#include "apm.h"
#if NAPM > 0
#include <machine/apm_bios.h>
#endif /* NAPM > 0 */
#include <pccard/cardinfo.h>
#include <pccard/driver.h>
#include <pccard/pcic.h>
#include <pccard/slot.h>
#include <pccard/pccard_nbk.h>
#include <machine/md_var.h>
/*
* XXX We shouldn't be using processor-specific/bus-specific code in
* here, but we need the start of the ISA hole (IOM_BEGIN).
*/
#ifdef PC98
#include <pc98/pc98/pc98.h>
#else
#include <i386/isa/isa.h>
#endif
SYSCTL_NODE(_machdep, OID_AUTO, pccard, CTLFLAG_RW, 0, "pccard");
static int pcic_resume_reset =
#ifdef PCIC_RESUME_RESET /* opt_pcic.h */
1;
#else
0;
#endif
SYSCTL_INT(_machdep_pccard, OID_AUTO, pcic_resume_reset, CTLFLAG_RW,
&pcic_resume_reset, 0, "");
#define PCCARD_MEMSIZE (4*1024)
#define MIN(a,b) ((a)<(b)?(a):(b))
static int allocate_driver(struct slot *, struct dev_desc *);
static void inserted(void *);
static void disable_slot(struct slot *);
static int invalid_io_memory(unsigned long, int);
static void power_off_slot(void *);
#if NAPM > 0
/*
* For the APM stuff, the apmhook structure is kept
* separate from the slot structure so that the slot
* drivers do not need to know about the hooks (or the
* data structures).
*/
static int slot_suspend(void *arg);
static int slot_resume(void *arg);
static struct apmhook s_hook[MAXSLOT]; /* APM suspend */
static struct apmhook r_hook[MAXSLOT]; /* APM resume */
#endif /* NAPM > 0 */
static struct slot *pccard_slots[MAXSLOT]; /* slot entries */
static struct slot *slot_list;
static struct slot_ctrl *cont_list;
/*
* The driver interface for read/write uses a block
* of memory in the ISA I/O memory space allocated via
* an ioctl setting.
*/
static unsigned long pccard_mem; /* Physical memory */
static unsigned char *pccard_kmem; /* Kernel virtual address */
static d_open_t crdopen;
static d_close_t crdclose;
static d_read_t crdread;
static d_write_t crdwrite;
static d_ioctl_t crdioctl;
static d_poll_t crdpoll;
#define CDEV_MAJOR 50
static struct cdevsw crd_cdevsw = {
/* open */ crdopen,
/* close */ crdclose,
/* read */ crdread,
/* write */ crdwrite,
/* ioctl */ crdioctl,
/* poll */ crdpoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "crd",
/* maj */ CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
/* bmaj */ -1
};
/*
* Power off the slot.
* (doing it immediately makes the removal of some cards unstable)
*/
static void
power_off_slot(void *arg)
{
struct slot *slt = (struct slot *)arg;
int s;
/*
* The following will generate an interrupt. So, to hold off
* the interrupt unitl after disable runs so that we can get rid
* rid of the interrupt before it becomes unsafe to touch the
* device.
*/
s = splhigh();
/* Power off the slot. */
slt->pwr_off_pending = 0;
slt->ctrl->disable(slt);
splx(s);
}
/*
* disable_slot - Disables the slot by removing
* the power and unmapping the I/O
*/
static void
disable_slot(struct slot *slt)
{
device_t pccarddev;
struct pccard_devinfo *devi;
int i;
/*
* Unload all the drivers on this slot. Note we can't
* remove the device structures themselves, because this
* may be called from the event routine, which is called
* from the slot controller's ISR, and removing the structures
* shouldn't happen during the middle of some driver activity.
*
* Note that a race condition is possible here; if a
* driver is accessing the device and it is removed, then
* all bets are off...
*/
pccarddev = devclass_get_device(pccard_devclass, 0);
for (devi = slt->devices; devi; devi = devi->next) {
if (devi->isahd.id_device != 0) {
device_delete_child(pccarddev, devi->isahd.id_device);
devi->isahd.id_device = 0;
}
}
/* Power off the slot 1/2 second after removal of the card */
slt->poff_ch = timeout(power_off_slot, (caddr_t)slt, hz / 2);
slt->pwr_off_pending = 1;
}
/*
* APM hooks for suspending and resuming.
*/
#if NAPM > 0
static int
slot_suspend(void *arg)
{
struct slot *slt = arg;
/* This code stolen from pccard_event:card_removed */
if (slt->state == filled) {
int s = splhigh();
disable_slot(slt);
slt->laststate = filled;
slt->state = suspend;
splx(s);
printf("pccard: card disabled, slot %d\n", slt->slotnum);
}
/*
* Disable any pending timeouts for this slot since we're
* powering it down/disabling now.
*/
untimeout(power_off_slot, (caddr_t)slt, slt->poff_ch);
slt->ctrl->disable(slt);
return (0);
}
static int
slot_resume(void *arg)
{
struct slot *slt = arg;
if (pcic_resume_reset)
slt->ctrl->resume(slt);
/* This code stolen from pccard_event:card_inserted */
if (slt->state == suspend) {
slt->laststate = suspend;
slt->state = empty;
slt->insert_seq = 1;
untimeout(inserted, (void *)slt, slt->insert_ch);
slt->insert_ch = timeout(inserted, (void *)slt, hz/4);
selwakeup(&slt->selp);
}
return (0);
}
#endif /* NAPM > 0 */
/*
* pccard_alloc_slot - Called from controller probe
* routine, this function allocates a new PC-CARD slot
* and initialises the data structures using the data provided.
* It returns the allocated structure to the probe routine
* to allow the controller specific data to be initialised.
*/
struct slot *
pccard_alloc_slot(struct slot_ctrl *ctrl)
{
struct slot *slt;
int slotno;
for (slotno = 0; slotno < MAXSLOT; slotno++)
if (pccard_slots[slotno] == 0)
break;
if (slotno == MAXSLOT)
return(0);
MALLOC(slt, struct slot *, sizeof(*slt), M_DEVBUF, M_WAITOK);
bzero(slt, sizeof(*slt));
make_dev(&crd_cdevsw, slotno, 0, 0, 0600, "card%d", slotno);
if (ctrl->extra) {
MALLOC(slt->cdata, void *, ctrl->extra, M_DEVBUF, M_WAITOK);
bzero(slt->cdata, ctrl->extra);
}
slt->ctrl = ctrl;
slt->slotnum = slotno;
pccard_slots[slotno] = slt;
slt->next = slot_list;
slot_list = slt;
/*
* If this controller hasn't been seen before, then
* link it into the list of controllers.
*/
if (ctrl->slots++ == 0) {
ctrl->next = cont_list;
cont_list = ctrl;
if (ctrl->maxmem > NUM_MEM_WINDOWS)
ctrl->maxmem = NUM_MEM_WINDOWS;
if (ctrl->maxio > NUM_IO_WINDOWS)
ctrl->maxio = NUM_IO_WINDOWS;
}
callout_handle_init(&slt->insert_ch);
callout_handle_init(&slt->poff_ch);
#if NAPM > 0
{
struct apmhook *ap;
ap = &s_hook[slt->slotnum];
ap->ah_fun = slot_suspend;
ap->ah_arg = (void *)slt;
ap->ah_name = "pcccard";
ap->ah_order = APM_MID_ORDER;
apm_hook_establish(APM_HOOK_SUSPEND, ap);
ap = &r_hook[slt->slotnum];
ap->ah_fun = slot_resume;
ap->ah_arg = (void *)slt;
ap->ah_name = "pccard";
ap->ah_order = APM_MID_ORDER;
apm_hook_establish(APM_HOOK_RESUME, ap);
}
#endif /* NAPM > 0 */
return(slt);
}
/*
* allocate_driver - Create a new device entry for this
* slot, and attach a driver to it.
*/
static int
allocate_driver(struct slot *slt, struct dev_desc *desc)
{
struct pccard_devinfo *devi;
device_t pccarddev;
int err, irq = 0;
device_t child;
pccarddev = devclass_get_device(pccard_devclass, 0);
irq = ffs(desc->irqmask) - 1;
MALLOC(devi, struct pccard_devinfo *, sizeof(*devi), M_DEVBUF, M_WAITOK);
bzero(devi, sizeof(*devi));
strcpy(devi->name, desc->name);
/*
* Create an entry for the device under this slot.
*/
devi->running = 1;
devi->slt = slt;
bcopy(desc->misc, devi->misc, sizeof(desc->misc));
resource_list_init(&devi->resources);
child = devi->isahd.id_device = device_add_child(pccarddev, devi->name,
desc->unit, devi);
device_set_flags(child, desc->flags);
err = bus_set_resource(child, SYS_RES_IOPORT, 0, desc->iobase,
desc->iosize);
if (err)
goto err;
if (irq)
err = bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
if (err)
goto err;
if (desc->memsize) {
err = bus_set_resource(child, SYS_RES_MEMORY, 0, desc->mem,
desc->memsize);
if (err)
goto err;
}
err = device_probe_and_attach(child);
err:
if (err)
device_delete_child(pccarddev, child);
return (err);
}
/*
* card insert routine - Called from a timeout to debounce
* insertion events.
*/
static void
inserted(void *arg)
{
struct slot *slt = arg;
slt->state = filled;
/*
* Enable 5V to the card so that the CIS can be read.
*/
slt->pwr.vcc = 50;
slt->pwr.vpp = 0;
/*
* Disable any pending timeouts for this slot, and explicitly
* power it off right now. Then, re-enable the power using
* the (possibly new) power settings.
*/
untimeout(power_off_slot, (caddr_t)slt, slt->poff_ch);
power_off_slot(slt);
slt->ctrl->power(slt);
printf("pccard: card inserted, slot %d\n", slt->slotnum);
/*
* Now start resetting the card.
*/
slt->ctrl->reset(slt);
}
/*
* Card event callback. Called at splhigh to prevent
* device interrupts from interceding.
*/
void
pccard_event(struct slot *slt, enum card_event event)
{
if (slt->insert_seq) {
slt->insert_seq = 0;
untimeout(inserted, (void *)slt, slt->insert_ch);
}
switch(event) {
case card_removed:
/*
* The slot and devices are disabled, but the
* data structures are not unlinked.
*/
if (slt->state == filled) {
int s = splhigh();
disable_slot(slt);
slt->state = empty;
splx(s);
printf("pccard: card removed, slot %d\n", slt->slotnum);
pccard_remove_beep();
selwakeup(&slt->selp);
}
break;
case card_inserted:
slt->insert_seq = 1;
slt->insert_ch = timeout(inserted, (void *)slt, hz/4);
pccard_insert_beep();
break;
}
}
/*
* Device driver interface.
*/
static int
crdopen(dev_t dev, int oflags, int devtype, struct proc *p)
{
struct slot *slt;
if (minor(dev) >= MAXSLOT)
return(ENXIO);
slt = pccard_slots[minor(dev)];
if (slt == 0)
return(ENXIO);
if (slt->rwmem == 0)
slt->rwmem = MDF_ATTR;
return(0);
}
/*
* Close doesn't de-allocate any resources, since
* slots may be assigned to drivers already.
*/
static int
crdclose(dev_t dev, int fflag, int devtype, struct proc *p)
{
return(0);
}
/*
* read interface. Map memory at lseek offset,
* then transfer to user space.
*/
static int
crdread(dev_t dev, struct uio *uio, int ioflag)
{
struct slot *slt = pccard_slots[minor(dev)];
struct mem_desc *mp, oldmap;
unsigned char *p;
unsigned int offs;
int error = 0, win, count;
if (slt == 0 || slt->state != filled)
return(ENXIO);
if (pccard_mem == 0)
return(ENOMEM);
for (win = 0; win < slt->ctrl->maxmem; win++)
if ((slt->mem[win].flags & MDF_ACTIVE) == 0)
break;
if (win >= slt->ctrl->maxmem)
return(EBUSY);
mp = &slt->mem[win];
oldmap = *mp;
mp->flags = slt->rwmem|MDF_ACTIVE;
while (uio->uio_resid && error == 0) {
mp->card = uio->uio_offset;
mp->size = PCCARD_MEMSIZE;
mp->start = (caddr_t)(void *)(uintptr_t)pccard_mem;
if ((error = slt->ctrl->mapmem(slt, win)) != 0)
break;
offs = (unsigned int)uio->uio_offset & (PCCARD_MEMSIZE - 1);
p = pccard_kmem + offs;
count = MIN(PCCARD_MEMSIZE - offs, uio->uio_resid);
error = uiomove(p, count, uio);
}
/*
* Restore original map.
*/
*mp = oldmap;
slt->ctrl->mapmem(slt, win);
return(error);
}
/*
* crdwrite - Write data to card memory.
* Handles wrap around so that only one memory
* window is used.
*/
static int
crdwrite(dev_t dev, struct uio *uio, int ioflag)
{
struct slot *slt = pccard_slots[minor(dev)];
struct mem_desc *mp, oldmap;
unsigned char *p;
unsigned int offs;
int error = 0, win, count;
if (slt == 0 || slt->state != filled)
return(ENXIO);
if (pccard_mem == 0)
return(ENOMEM);
for (win = 0; win < slt->ctrl->maxmem; win++)
if ((slt->mem[win].flags & MDF_ACTIVE) == 0)
break;
if (win >= slt->ctrl->maxmem)
return(EBUSY);
mp = &slt->mem[win];
oldmap = *mp;
mp->flags = slt->rwmem|MDF_ACTIVE;
while (uio->uio_resid && error == 0) {
mp->card = uio->uio_offset;
mp->size = PCCARD_MEMSIZE;
mp->start = (caddr_t)(void *)(uintptr_t)pccard_mem;
if ((error = slt->ctrl->mapmem(slt, win)) != 0)
break;
offs = (unsigned int)uio->uio_offset & (PCCARD_MEMSIZE - 1);
p = pccard_kmem + offs;
count = MIN(PCCARD_MEMSIZE - offs, uio->uio_resid);
error = uiomove(p, count, uio);
}
/*
* Restore original map.
*/
*mp = oldmap;
slt->ctrl->mapmem(slt, win);
return(error);
}
/*
* ioctl calls - allows setting/getting of memory and I/O
* descriptors, and assignment of drivers.
*/
static int
crdioctl(dev_t dev, u_long cmd, caddr_t data, int fflag, struct proc *p)
{
struct slot *slt = pccard_slots[minor(dev)];
struct mem_desc *mp;
struct io_desc *ip;
int s, err;
/* beep is disabled until the 1st call of crdioctl() */
pccard_beep_select(BEEP_ON);
if (slt == 0 && cmd != PIOCRWMEM)
return(ENXIO);
switch(cmd) {
default:
if (slt->ctrl->ioctl)
return(slt->ctrl->ioctl(slt, cmd, data));
return(ENOTTY);
/*
* Get slot state.
*/
case PIOCGSTATE:
s = splhigh();
((struct slotstate *)data)->state = slt->state;
((struct slotstate *)data)->laststate = slt->laststate;
slt->laststate = slt->state;
splx(s);
((struct slotstate *)data)->maxmem = slt->ctrl->maxmem;
((struct slotstate *)data)->maxio = slt->ctrl->maxio;
((struct slotstate *)data)->irqs = 0;
break;
/*
* Get memory context.
*/
case PIOCGMEM:
s = ((struct mem_desc *)data)->window;
if (s < 0 || s >= slt->ctrl->maxmem)
return(EINVAL);
mp = &slt->mem[s];
((struct mem_desc *)data)->flags = mp->flags;
((struct mem_desc *)data)->start = mp->start;
((struct mem_desc *)data)->size = mp->size;
((struct mem_desc *)data)->card = mp->card;
break;
/*
* Set memory context. If context already active, then unmap it.
* It is hard to see how the parameters can be checked.
* At the very least, we only allow root to set the context.
*/
case PIOCSMEM:
if (suser(p))
return(EPERM);
if (slt->state != filled)
return(ENXIO);
s = ((struct mem_desc *)data)->window;
if (s < 0 || s >= slt->ctrl->maxmem)
return(EINVAL);
slt->mem[s] = *((struct mem_desc *)data);
return(slt->ctrl->mapmem(slt, s));
/*
* Get I/O port context.
*/
case PIOCGIO:
s = ((struct io_desc *)data)->window;
if (s < 0 || s >= slt->ctrl->maxio)
return(EINVAL);
ip = &slt->io[s];
((struct io_desc *)data)->flags = ip->flags;
((struct io_desc *)data)->start = ip->start;
((struct io_desc *)data)->size = ip->size;
break;
/*
* Set I/O port context.
*/
case PIOCSIO:
if (suser(p))
return(EPERM);
if (slt->state != filled)
return(ENXIO);
s = ((struct io_desc *)data)->window;
if (s < 0 || s >= slt->ctrl->maxio)
return(EINVAL);
slt->io[s] = *((struct io_desc *)data);
/* XXX Don't actually map */
return 0;
break;
/*
* Set memory window flags for read/write interface.
*/
case PIOCRWFLAG:
slt->rwmem = *(int *)data;
break;
/*
* Set the memory window to be used for the read/write interface.
*/
case PIOCRWMEM:
if (*(unsigned long *)data == 0) {
if (pccard_mem)
*(unsigned long *)data = pccard_mem;
break;
}
if (suser(p))
return(EPERM);
/*
* Validate the memory by checking it against the I/O
* memory range. It must also start on an aligned block size.
*/
if (invalid_io_memory(*(unsigned long *)data, PCCARD_MEMSIZE))
return(EINVAL);
if (*(unsigned long *)data & (PCCARD_MEMSIZE-1))
return(EINVAL);
/*
* Map it to kernel VM.
*/
pccard_mem = *(unsigned long *)data;
pccard_kmem =
(unsigned char *)(void *)(uintptr_t)
(pccard_mem + atdevbase - IOM_BEGIN);
break;
/*
* Set power values.
*/
case PIOCSPOW:
slt->pwr = *(struct power *)data;
return(slt->ctrl->power(slt));
/*
* Allocate a driver to this slot.
*/
case PIOCSDRV:
if (suser(p))
return(EPERM);
err = allocate_driver(slt, (struct dev_desc *)data);
if (!err)
pccard_success_beep();
else
pccard_failure_beep();
return err;
case PIOCSBEEP:
if (pccard_beep_select(*(int *)data)) {
return EINVAL;
}
break;
}
return(0);
}
/*
* poll - Poll on exceptions will return true
* when a change in card status occurs.
*/
static int
crdpoll(dev_t dev, int events, struct proc *p)
{
int s;
struct slot *slt = pccard_slots[minor(dev)];
int revents = 0;
if (events & (POLLIN | POLLRDNORM))
revents |= events & (POLLIN | POLLRDNORM);
if (events & (POLLOUT | POLLWRNORM))
revents |= events & (POLLIN | POLLRDNORM);
s = splhigh();
/*
* select for exception - card event.
*/
if (events & POLLRDBAND)
if (slt == 0 || slt->laststate != slt->state)
revents |= POLLRDBAND;
if (revents == 0)
selrecord(p, &slt->selp);
splx(s);
return (revents);
}
/*
* invalid_io_memory - verify that the ISA I/O memory block
* is a valid and unallocated address.
* A simple check of the range is done, and then a
* search of the current devices is done to check for
* overlapping regions.
*/
static int
invalid_io_memory(unsigned long adr, int size)
{
/* XXX - What's magic about 0xC0000?? */
if (adr < 0xC0000 || (adr+size) > IOM_END)
return(1);
return(0);
}