mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-27 11:55:06 +00:00
aa6dfd9d3d
other systems. o Normalize copyright text. o Clean up probe code function interfaces by passing around a single structure of common arguments instead of passing "too many" args in each function call. o Add support for the AAA-131 as a SCSI adapter. o Add support for the AHA-4944 courtesy of "Matthew N. Dodd" <winter@jurai.net o Correct manual termination support for PCI cards. The bit definitions for manual termination control in the SEEPROM were incorrect. o Add support for extracting NVRAM information from SCB 2 for BIOSen that use this mechanism to pass this data to OS drivers. o Properly set the STPWLEVEL bit in PCI config space based on the setting in an SEEPROM. o Go back to useing 32byte SCBs for all controllers. The current firmware allows us to embed 12byte cdbs on all controllers in a 32byte SCB, and larger cdbs are rarely used, so it is a better use of this space to offer more SCBs (32). o Add support for U160 transfers. o Add an idle loop executed during data transfers that prefetches S/G segments on controllers that have a secondary DMA engine (aic789X). o Improve the performance of reselections by avoiding an extra one byte DMA in the case of an SCB lookup miss for the reselecting target. We now keep a 16byte "untagged target" array on the card for dealing with untagged reselections. If the controller has external SCB ram and can support 64byte SCBs, then we use an "untagged target/lun" array to maximize concurrency. Without external SCB ram, the controller is limited to one untagged transaction per target, auto-request sense operations excluded. o Correct the setup of the STPWEN bit in SXFRCTL1. This control line is tri-stated until set to one, so set it to one and then set it to the desired value. o Add tagged queuing support to our target role implementation. o Handle the common cases of the ignore wide residue message in firmware. o Add preliminary support for 39bit addressing. o Add support for assembling on big-endian machines. Big-endian support is not complete in the driver. o Correctly remove SCBs in the waiting for selection queue when freezing a device queue. o Now that we understand more about the autoflush bug on the aic7890, only use the workaround on devices that need it. o Add a workaround for the "aic7890 hangs the system when you attempt to pause it" problem. We can now pause the aic7890 safely regardless of what instruction it is executing.
92 lines
3.0 KiB
C
92 lines
3.0 KiB
C
/*
|
|
* Interface to the 93C46 serial EEPROM that is used to store BIOS
|
|
* settings for the aic7xxx based adaptec SCSI controllers. It can
|
|
* also be used for 93C26 and 93C06 serial EEPROMS.
|
|
*
|
|
* Copyright (c) 1994, 1995 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU Public License ("GPL").
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#if !defined(__NetBSD__)
|
|
#include <sys/systm.h>
|
|
#endif
|
|
|
|
#ifdef _KERNEL
|
|
|
|
typedef enum {
|
|
C46 = 6,
|
|
C56_66 = 8
|
|
} seeprom_chip_t;
|
|
|
|
struct seeprom_descriptor {
|
|
bus_space_tag_t sd_tag;
|
|
bus_space_handle_t sd_bsh;
|
|
bus_size_t sd_control_offset;
|
|
bus_size_t sd_status_offset;
|
|
bus_size_t sd_dataout_offset;
|
|
seeprom_chip_t sd_chip;
|
|
uint16_t sd_MS;
|
|
uint16_t sd_RDY;
|
|
uint16_t sd_CS;
|
|
uint16_t sd_CK;
|
|
uint16_t sd_DO;
|
|
uint16_t sd_DI;
|
|
};
|
|
|
|
/*
|
|
* This function will read count 16-bit words from the serial EEPROM and
|
|
* return their value in buf. The port address of the aic7xxx serial EEPROM
|
|
* control register is passed in as offset. The following parameters are
|
|
* also passed in:
|
|
*
|
|
* CS - Chip select
|
|
* CK - Clock
|
|
* DO - Data out
|
|
* DI - Data in
|
|
* RDY - SEEPROM ready
|
|
* MS - Memory port mode select
|
|
*
|
|
* A failed read attempt returns 0, and a successful read returns 1.
|
|
*/
|
|
|
|
#define SEEPROM_INB(sd) \
|
|
bus_space_read_1(sd->sd_tag, sd->sd_bsh, sd->sd_control_offset)
|
|
#define SEEPROM_OUTB(sd, value) \
|
|
bus_space_write_1(sd->sd_tag, sd->sd_bsh, sd->sd_control_offset, value)
|
|
#define SEEPROM_STATUS_INB(sd) \
|
|
bus_space_read_1(sd->sd_tag, sd->sd_bsh, sd->sd_status_offset)
|
|
#define SEEPROM_DATA_INB(sd) \
|
|
bus_space_read_1(sd->sd_tag, sd->sd_bsh, sd->sd_dataout_offset)
|
|
|
|
int read_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
|
|
bus_size_t start_addr, bus_size_t count);
|
|
|
|
#endif /* _KERNEL */
|