freebsd

mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00

History

Stefan Eßer 02d18b728b Go back to previous definition of FE_CACHE_SET, since the problem caused by read-multiple on the 53c810a should have been fixed by adjusting the alignment of the global header in rev 1.104 of ncr.c.		1997-08-24 06:24:51 +00:00
..
aic7870.c	Modify my copyright notice to allow the sequencer to be used with GPLed	1997-06-27 19:39:34 +00:00
brktree_reg.h	1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu>	1997-05-01 00:16:31 +00:00
brooktree848.c	Added frequencies for north american HRC cable.	1997-08-17 05:50:56 +00:00
bt9xx.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
cy_pci.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
cy_pcireg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
dc21040reg.h	Import Matt's if_de driver 970703 release. This (apparently) supports	1997-08-03 12:17:39 +00:00
ide_pci.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
ide_pcireg.h	Add support for busmaster DMA on some PCI IDE chipsets.	1997-07-29 12:57:25 +00:00
if_de.c	Merge Matt's if_de.c changes in.	1997-08-03 13:00:42 +00:00
if_devar.h	Import Matt's if_de driver 970703 release. This (apparently) supports	1997-08-03 12:17:39 +00:00
if_ed_p.c	Add the NetVin 5000 series NE2000 PCI card vendor and device IDs.	1997-08-14 07:53:07 +00:00
if_en_pci.c	import Chuck Cranor's ATM driver	1997-05-09 07:48:14 +00:00
if_fpa.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
if_fxp.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
if_fxpreg.h	Added support for the Intel 82555 PHY chip which is being used on newer	1997-06-13 22:34:52 +00:00
if_lnc_p.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
if_sr_p.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
if_vx_pci.c	Yank the casts.	1997-08-21 08:42:59 +00:00
locate.pl	Perl script to convert NCR script address into label+offset.	1995-09-08 19:37:11 +00:00
meteor_reg.h	Here is a patch that fix a few problems with the RGB version of	1996-06-07 03:03:25 +00:00
meteor.c	Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include	1997-03-24 11:25:10 +00:00
ncr.c	Some cleanup and a fix for an assumed chip bug:	1997-08-23 22:01:49 +00:00
ncrreg.h	Go back to previous definition of FE_CACHE_SET, since the problem	1997-08-24 06:24:51 +00:00
pci_compat.c	Yank the casts.	1997-08-21 08:42:59 +00:00
pci_ioctl.h	Add PCI LKM support.	1997-01-21 23:23:40 +00:00
pci.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
pcireg.h	PCI_CLASS_MASS_STORAGE (under PCI_COMPAT) was used in a driver in LINT	1997-06-01 16:00:43 +00:00
pcisupport.c	SMP Natoma motherboards cannot know if you are booting a UP or SMP OS. This	1997-08-16 07:18:51 +00:00
pcivar.h	Reorder function decls alphabetically.	1997-08-21 08:31:41 +00:00
README.bt848	Fixed omission of reference to ioctl_bt848.h when installing on 2.2.	1997-05-01 00:42:54 +00:00
README.de	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
README.de-le	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
scsiiom.c	Tekram supplied driver for their DC390 and DC390T controllers.	1996-12-15 23:40:48 +00:00
tek390.c	Fix problem in the DC390_DefaultEEprom subroutine, which could lead	1997-08-11 08:49:08 +00:00
tek390.h	Rename DIAGNOSTIC to DMA_DIAGNOSTIC.	1996-12-18 11:35:12 +00:00
wd82371.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
wd82371reg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
wdc_p.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00

README.de-le

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/