mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-16 10:20:30 +00:00
b40ce4165d
Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
955 lines
24 KiB
C
955 lines
24 KiB
C
/*
|
|
* Cronyx-Sigma adapter driver for FreeBSD.
|
|
* Supports PPP/HDLC protocol in synchronous mode,
|
|
* and asyncronous channels with full modem control.
|
|
*
|
|
* Copyright (C) 1994 Cronyx Ltd.
|
|
* Author: Serge Vakulenko, <vak@zebub.msk.su>
|
|
*
|
|
* This software is distributed with NO WARRANTIES, not even the implied
|
|
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Authors grant any other persons or organisations permission to use
|
|
* or modify this software as long as this message is kept with the software,
|
|
* all derivative works or modified versions.
|
|
*
|
|
* Version 1.9, Wed Oct 4 18:58:15 MSK 1995
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include "cx.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/socket.h>
|
|
#include <net/if.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
# if __FreeBSD__ < 2
|
|
# include <machine/pio.h>
|
|
# define RB_GETC(q) getc(q)
|
|
# endif
|
|
#endif
|
|
#ifdef __bsdi__
|
|
# include <sys/ttystats.h>
|
|
# include <machine/inline.h>
|
|
# define tsleep(tp,pri,msg,x) ((tp)->t_state |= TS_WOPEN,\
|
|
ttysleep (tp, (caddr_t)&tp->t_rawq, pri, msg, x))
|
|
#endif
|
|
#if !defined (__FreeBSD__) || __FreeBSD__ >= 2
|
|
# define t_out t_outq
|
|
# define RB_LEN(q) ((q).c_cc)
|
|
# define RB_GETC(q) getc(&q)
|
|
#ifndef TSA_CARR_ON /* FreeBSD 2.x before not long after 2.0.5 */
|
|
# define TSA_CARR_ON(tp) tp
|
|
# define TSA_OLOWAT(q) ((caddr_t)&(q)->t_out)
|
|
#endif
|
|
#endif
|
|
|
|
#include <machine/cronyx.h>
|
|
#include <i386/isa/cxreg.h>
|
|
|
|
/* XXX imported from if_cx.c. */
|
|
void cxswitch (cx_chan_t *c, cx_soft_opt_t new);
|
|
|
|
/* XXX exported. */
|
|
void cxmint (cx_chan_t *c);
|
|
int cxrinta (cx_chan_t *c);
|
|
void cxtinta (cx_chan_t *c);
|
|
timeout_t cxtimeout;
|
|
|
|
#ifdef DEBUG
|
|
# define print(s) printf s
|
|
#else
|
|
# define print(s) {/*void*/}
|
|
#endif
|
|
|
|
#define DMABUFSZ (6*256) /* buffer size */
|
|
#define BYTE *(unsigned char*)&
|
|
#define UNIT(u) (minor(u) & 077)
|
|
#define UNIT_CTL 077
|
|
|
|
extern cx_board_t cxboard [NCX]; /* adapter state structures */
|
|
extern cx_chan_t *cxchan [NCX*NCHAN]; /* unit to channel struct pointer */
|
|
#if __FreeBSD__ >= 2
|
|
static struct tty cx_tty [NCX*NCHAN]; /* tty data */
|
|
|
|
static d_open_t cxopen;
|
|
static d_close_t cxclose;
|
|
static d_ioctl_t cxioctl;
|
|
|
|
#define CDEV_MAJOR 42
|
|
/* Don't make this static, since if_cx.c uses it. */
|
|
struct cdevsw cx_cdevsw = {
|
|
/* open */ cxopen,
|
|
/* close */ cxclose,
|
|
/* read */ ttyread,
|
|
/* write */ ttywrite,
|
|
/* ioctl */ cxioctl,
|
|
/* poll */ ttypoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ nostrategy,
|
|
/* name */ "cx",
|
|
/* maj */ CDEV_MAJOR,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ D_TTY | D_KQFILTER,
|
|
/* kqfilter */ ttykqfilter,
|
|
};
|
|
#else
|
|
struct tty *cx_tty [NCX*NCHAN]; /* tty data */
|
|
#endif
|
|
|
|
static void cxoproc (struct tty *tp);
|
|
static void cxstop (struct tty *tp, int flag);
|
|
static int cxparam (struct tty *tp, struct termios *t);
|
|
|
|
int cxopen (dev_t dev, int flag, int mode, struct thread *td)
|
|
{
|
|
int unit = UNIT (dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
unsigned short port;
|
|
struct tty *tp;
|
|
int error = 0;
|
|
|
|
if (unit == UNIT_CTL) {
|
|
print (("cx: cxopen /dev/cronyx\n"));
|
|
return (0);
|
|
}
|
|
if (unit >= NCX*NCHAN || !c || c->type==T_NONE)
|
|
return (ENXIO);
|
|
port = c->chip->port;
|
|
print (("cx%d.%d: cxopen unit=%d\n", c->board->num, c->num, unit));
|
|
if (c->mode != M_ASYNC)
|
|
return (EBUSY);
|
|
if (! c->ttyp) {
|
|
#ifdef __FreeBSD__
|
|
#if __FreeBSD__ >= 2
|
|
c->ttyp = &cx_tty[unit];
|
|
#else
|
|
c->ttyp = cx_tty[unit] = ttymalloc (cx_tty[unit]);
|
|
#endif
|
|
#else
|
|
MALLOC (cx_tty[unit], struct tty*, sizeof (struct tty), M_DEVBUF, M_WAITOK);
|
|
bzero (cx_tty[unit], sizeof (*cx_tty[unit]));
|
|
c->ttyp = cx_tty[unit];
|
|
#endif
|
|
c->ttyp->t_oproc = cxoproc;
|
|
c->ttyp->t_stop = cxstop;
|
|
c->ttyp->t_param = cxparam;
|
|
}
|
|
dev->si_tty = c->ttyp;
|
|
#ifdef __bsdi__
|
|
if (! c->ttydev) {
|
|
MALLOC (c->ttydev, struct ttydevice_tmp*,
|
|
sizeof (struct ttydevice_tmp), M_DEVBUF, M_WAITOK);
|
|
bzero (c->ttydev, sizeof (*c->ttydev));
|
|
strcpy (c->ttydev->tty_name, "cx");
|
|
c->ttydev->tty_unit = unit;
|
|
c->ttydev->tty_base = unit;
|
|
c->ttydev->tty_count = 1;
|
|
c->ttydev->tty_ttys = c->ttyp;
|
|
tty_attach (c->ttydev);
|
|
}
|
|
#endif
|
|
tp = c->ttyp;
|
|
tp->t_dev = dev;
|
|
if ((tp->t_state & TS_ISOPEN) && (tp->t_state & TS_XCLUDE) &&
|
|
suser_td(td))
|
|
return (EBUSY);
|
|
if (! (tp->t_state & TS_ISOPEN)) {
|
|
ttychars (tp);
|
|
if (tp->t_ispeed == 0) {
|
|
#ifdef __bsdi__
|
|
tp->t_termios = deftermios;
|
|
#else
|
|
tp->t_iflag = 0;
|
|
tp->t_oflag = 0;
|
|
tp->t_lflag = 0;
|
|
tp->t_cflag = CREAD | CS8 | HUPCL;
|
|
tp->t_ispeed = c->rxbaud;
|
|
tp->t_ospeed = c->txbaud;
|
|
#endif
|
|
}
|
|
cxparam (tp, &tp->t_termios);
|
|
ttsetwater (tp);
|
|
}
|
|
|
|
spltty ();
|
|
if (! (tp->t_state & TS_ISOPEN)) {
|
|
/*
|
|
* Compute optimal receiver buffer length.
|
|
* The best choice is rxbaud/400.
|
|
* Make it even, to avoid byte-wide DMA transfers.
|
|
* --------------------------
|
|
* Baud rate Buffer length
|
|
* --------------------------
|
|
* 300 4
|
|
* 1200 4
|
|
* 9600 24
|
|
* 19200 48
|
|
* 38400 96
|
|
* 57600 192
|
|
* 115200 288
|
|
* --------------------------
|
|
*/
|
|
int rbsz = (c->rxbaud + 800 - 1) / 800 * 2;
|
|
if (rbsz < 4)
|
|
rbsz = 4;
|
|
else if (rbsz > DMABUFSZ)
|
|
rbsz = DMABUFSZ;
|
|
|
|
/* Initialize channel, enable receiver. */
|
|
cx_cmd (port, CCR_INITCH | CCR_ENRX);
|
|
cx_cmd (port, CCR_INITCH | CCR_ENRX);
|
|
|
|
/* Start receiver. */
|
|
outw (ARBCNT(port), rbsz);
|
|
outw (BRBCNT(port), rbsz);
|
|
outw (ARBSTS(port), BSTS_OWN24);
|
|
outw (BRBSTS(port), BSTS_OWN24);
|
|
|
|
/* Enable interrupts. */
|
|
outb (IER(port), IER_RXD | IER_RET | IER_TXD | IER_MDM);
|
|
|
|
cx_chan_dtr (c, 1);
|
|
cx_chan_rts (c, 1);
|
|
}
|
|
if (cx_chan_cd (c))
|
|
(*linesw[tp->t_line].l_modem)(tp, 1);
|
|
if (! (flag & O_NONBLOCK)) {
|
|
/* Lock the channel against cxconfig while we are
|
|
* waiting for carrier. */
|
|
c->sopt.lock = 1;
|
|
while (!(tp->t_cflag & CLOCAL) && !(tp->t_state & TS_CARR_ON))
|
|
if ((error = tsleep (TSA_CARR_ON(tp), TTIPRI | PCATCH,
|
|
"cxdcd", 0)))
|
|
break;
|
|
c->sopt.lock = 0; /* Unlock the channel. */
|
|
}
|
|
print (("cx%d.%d: cxopen done csr=%b\n", c->board->num, c->num,
|
|
inb(CSR(c->chip->port)), CSRA_BITS));
|
|
spl0 ();
|
|
if (error)
|
|
return (error);
|
|
#if __FreeBSD__ >= 2
|
|
error = (*linesw[tp->t_line].l_open) (dev, tp);
|
|
#else
|
|
error = (*linesw[tp->t_line].l_open) (dev, tp, 0);
|
|
#endif
|
|
return (error);
|
|
}
|
|
|
|
int cxclose (dev_t dev, int flag, int mode, struct thread *td)
|
|
{
|
|
int unit = UNIT (dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
struct tty *tp;
|
|
int s;
|
|
|
|
if (unit == UNIT_CTL)
|
|
return (0);
|
|
tp = c->ttyp;
|
|
(*linesw[tp->t_line].l_close) (tp, flag);
|
|
|
|
/* Disable receiver.
|
|
* Transmitter continues sending the queued data. */
|
|
s = spltty ();
|
|
outb (CAR(c->chip->port), c->num & 3);
|
|
outb (IER(c->chip->port), IER_TXD | IER_MDM);
|
|
cx_cmd (c->chip->port, CCR_DISRX);
|
|
|
|
/* Clear DTR and RTS. */
|
|
if ((tp->t_cflag & HUPCL) || ! (tp->t_state & TS_ISOPEN)) {
|
|
cx_chan_dtr (c, 0);
|
|
cx_chan_rts (c, 0);
|
|
}
|
|
|
|
/* Stop sending break. */
|
|
if (c->brk == BRK_SEND) {
|
|
c->brk = BRK_STOP;
|
|
if (! (tp->t_state & TS_BUSY))
|
|
cxoproc (tp);
|
|
}
|
|
splx (s);
|
|
ttyclose (tp);
|
|
return (0);
|
|
}
|
|
|
|
int cxioctl (dev_t dev, u_long cmd, caddr_t data, int flag, struct thread *td)
|
|
{
|
|
int unit = UNIT (dev);
|
|
cx_chan_t *c, *m;
|
|
cx_stat_t *st;
|
|
struct tty *tp;
|
|
int error, s;
|
|
unsigned char msv;
|
|
struct ifnet *master;
|
|
|
|
if (unit == UNIT_CTL) {
|
|
/* Process an ioctl request on /dev/cronyx */
|
|
cx_options_t *o = (cx_options_t*) data;
|
|
|
|
if (o->board >= NCX || o->channel >= NCHAN)
|
|
return (EINVAL);
|
|
c = &cxboard[o->board].chan[o->channel];
|
|
if (c->type == T_NONE)
|
|
return (ENXIO);
|
|
switch (cmd) {
|
|
default:
|
|
return (EINVAL);
|
|
|
|
case CXIOCSETMODE:
|
|
print (("cx%d.%d: CXIOCSETMODE\n", o->board, o->channel));
|
|
if (c->type == T_NONE)
|
|
return (EINVAL);
|
|
if (c->type == T_ASYNC && o->mode != M_ASYNC)
|
|
return (EINVAL);
|
|
if (o->mode == M_ASYNC)
|
|
switch (c->type) {
|
|
case T_SYNC_RS232:
|
|
case T_SYNC_V35:
|
|
case T_SYNC_RS449:
|
|
return (EINVAL);
|
|
}
|
|
/* Somebody is waiting for carrier? */
|
|
if (c->sopt.lock)
|
|
return (EBUSY);
|
|
/* /dev/ttyXX is already opened by someone? */
|
|
if (c->mode == M_ASYNC && c->ttyp &&
|
|
(c->ttyp->t_state & TS_ISOPEN))
|
|
return (EBUSY);
|
|
/* Network interface is up? */
|
|
if (c->mode != M_ASYNC && (c->ifp->if_flags & IFF_UP))
|
|
return (EBUSY);
|
|
|
|
/* Find the master interface. */
|
|
master = *o->master ? ifunit (o->master) : c->ifp;
|
|
if (! master)
|
|
return (EINVAL);
|
|
m = cxchan[master->if_unit];
|
|
|
|
/* Leave the previous master queue. */
|
|
if (c->master != c->ifp) {
|
|
cx_chan_t *p = cxchan[c->master->if_unit];
|
|
|
|
for (; p; p=p->slaveq)
|
|
if (p->slaveq == c)
|
|
p->slaveq = c->slaveq;
|
|
}
|
|
|
|
/* Set up new master. */
|
|
c->master = master;
|
|
c->slaveq = 0;
|
|
|
|
/* Join the new master queue. */
|
|
if (c->master != c->ifp) {
|
|
c->slaveq = m->slaveq;
|
|
m->slaveq = c;
|
|
}
|
|
|
|
c->mode = o->mode;
|
|
c->rxbaud = o->rxbaud;
|
|
c->txbaud = o->txbaud;
|
|
c->opt = o->opt;
|
|
c->aopt = o->aopt;
|
|
c->hopt = o->hopt;
|
|
c->bopt = o->bopt;
|
|
c->xopt = o->xopt;
|
|
switch (c->num) {
|
|
case 0: c->board->if0type = o->iftype; break;
|
|
case 8: c->board->if8type = o->iftype; break;
|
|
}
|
|
s = spltty ();
|
|
cxswitch (c, o->sopt);
|
|
cx_setup_chan (c);
|
|
outb (IER(c->chip->port), 0);
|
|
splx (s);
|
|
break;
|
|
|
|
case CXIOCGETSTAT:
|
|
st = (cx_stat_t*) data;
|
|
st->rintr = c->stat->rintr;
|
|
st->tintr = c->stat->tintr;
|
|
st->mintr = c->stat->mintr;
|
|
st->ibytes = c->stat->ibytes;
|
|
st->ipkts = c->stat->ipkts;
|
|
st->ierrs = c->stat->ierrs;
|
|
st->obytes = c->stat->obytes;
|
|
st->opkts = c->stat->opkts;
|
|
st->oerrs = c->stat->oerrs;
|
|
break;
|
|
|
|
case CXIOCGETMODE:
|
|
print (("cx%d.%d: CXIOCGETMODE\n", o->board, o->channel));
|
|
o->type = c->type;
|
|
o->mode = c->mode;
|
|
o->rxbaud = c->rxbaud;
|
|
o->txbaud = c->txbaud;
|
|
o->opt = c->opt;
|
|
o->aopt = c->aopt;
|
|
o->hopt = c->hopt;
|
|
o->bopt = c->bopt;
|
|
o->xopt = c->xopt;
|
|
o->sopt = c->sopt;
|
|
switch (c->num) {
|
|
case 0: o->iftype = c->board->if0type; break;
|
|
case 8: o->iftype = c->board->if8type; break;
|
|
}
|
|
if (c->master != c->ifp)
|
|
snprintf (o->master, sizeof(o->master),
|
|
"%s%d", c->master->if_name,
|
|
c->master->if_unit);
|
|
else
|
|
*o->master = 0;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
c = cxchan[unit];
|
|
tp = c->ttyp;
|
|
if (! tp)
|
|
return (EINVAL);
|
|
#if __FreeBSD__ >= 2
|
|
error = (*linesw[tp->t_line].l_ioctl) (tp, cmd, data, flag, td);
|
|
#else
|
|
error = (*linesw[tp->t_line].l_ioctl) (tp, cmd, data, flag);
|
|
#endif
|
|
if (error != ENOIOCTL)
|
|
return (error);
|
|
error = ttioctl (tp, cmd, data, flag);
|
|
if (error != ENOIOCTL)
|
|
return (error);
|
|
|
|
s = spltty ();
|
|
switch (cmd) {
|
|
default:
|
|
splx (s);
|
|
return (ENOTTY);
|
|
case TIOCSBRK: /* Start sending line break */
|
|
c->brk = BRK_SEND;
|
|
if (! (tp->t_state & TS_BUSY))
|
|
cxoproc (tp);
|
|
break;
|
|
case TIOCCBRK: /* Stop sending line break */
|
|
c->brk = BRK_STOP;
|
|
if (! (tp->t_state & TS_BUSY))
|
|
cxoproc (tp);
|
|
break;
|
|
case TIOCSDTR: /* Set DTR */
|
|
cx_chan_dtr (c, 1);
|
|
break;
|
|
case TIOCCDTR: /* Clear DTR */
|
|
cx_chan_dtr (c, 0);
|
|
break;
|
|
case TIOCMSET: /* Set DTR/RTS */
|
|
cx_chan_dtr (c, (*(int*)data & TIOCM_DTR) ? 1 : 0);
|
|
cx_chan_rts (c, (*(int*)data & TIOCM_RTS) ? 1 : 0);
|
|
break;
|
|
case TIOCMBIS: /* Add DTR/RTS */
|
|
if (*(int*)data & TIOCM_DTR) cx_chan_dtr (c, 1);
|
|
if (*(int*)data & TIOCM_RTS) cx_chan_rts (c, 1);
|
|
break;
|
|
case TIOCMBIC: /* Clear DTR/RTS */
|
|
if (*(int*)data & TIOCM_DTR) cx_chan_dtr (c, 0);
|
|
if (*(int*)data & TIOCM_RTS) cx_chan_rts (c, 0);
|
|
break;
|
|
case TIOCMGET: /* Get modem status */
|
|
msv = inb (MSVR(c->chip->port));
|
|
*(int*)data = TIOCM_LE; /* always enabled while open */
|
|
if (msv & MSV_DSR) *(int*)data |= TIOCM_DSR;
|
|
if (msv & MSV_CTS) *(int*)data |= TIOCM_CTS;
|
|
if (msv & MSV_CD) *(int*)data |= TIOCM_CD;
|
|
if (c->dtr) *(int*)data |= TIOCM_DTR;
|
|
if (c->rts) *(int*)data |= TIOCM_RTS;
|
|
break;
|
|
}
|
|
splx (s);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Fill transmitter buffer with data.
|
|
*/
|
|
static void
|
|
cxout (cx_chan_t *c, char b)
|
|
{
|
|
unsigned char *buf, *p, sym;
|
|
unsigned short port = c->chip->port, len = 0, cnt_port, sts_port;
|
|
struct tty *tp = c->ttyp;
|
|
|
|
if (! tp)
|
|
return;
|
|
|
|
/* Choose the buffer. */
|
|
if (b == 'A') {
|
|
buf = c->atbuf;
|
|
cnt_port = ATBCNT(port);
|
|
sts_port = ATBSTS(port);
|
|
} else {
|
|
buf = c->btbuf;
|
|
cnt_port = BTBCNT(port);
|
|
sts_port = BTBSTS(port);
|
|
}
|
|
|
|
/* Is it busy? */
|
|
if (inb (sts_port) & BSTS_OWN24) {
|
|
tp->t_state |= TS_BUSY;
|
|
return;
|
|
}
|
|
|
|
switch (c->brk) {
|
|
case BRK_SEND:
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x81; /* send break */
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x82; /* insert delay */
|
|
*buf++ = 250; /* 1/4 of second */
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x82; /* insert delay */
|
|
*buf++ = 250; /* + 1/4 of second */
|
|
len = 8;
|
|
c->brk = BRK_IDLE;
|
|
break;
|
|
case BRK_STOP:
|
|
*buf++ = 0; /* extended transmit command */
|
|
*buf++ = 0x83; /* stop break */
|
|
len = 2;
|
|
c->brk = BRK_IDLE;
|
|
break;
|
|
case BRK_IDLE:
|
|
p = buf;
|
|
if (tp->t_iflag & IXOFF)
|
|
while (RB_LEN (tp->t_out) && p<buf+DMABUFSZ-1) {
|
|
sym = RB_GETC (tp->t_out);
|
|
/* Send XON/XOFF out of band. */
|
|
if (sym == tp->t_cc[VSTOP]) {
|
|
outb (STCR(port), STC_SNDSPC|STC_SSPC_2);
|
|
continue;
|
|
}
|
|
if (sym == tp->t_cc[VSTART]) {
|
|
outb (STCR(port), STC_SNDSPC|STC_SSPC_1);
|
|
continue;
|
|
}
|
|
/* Duplicate NULLs in ETC mode. */
|
|
if (! sym)
|
|
*p++ = 0;
|
|
*p++ = sym;
|
|
}
|
|
else
|
|
while (RB_LEN (tp->t_out) && p<buf+DMABUFSZ-1) {
|
|
sym = RB_GETC (tp->t_out);
|
|
/* Duplicate NULLs in ETC mode. */
|
|
if (! sym)
|
|
*p++ = 0;
|
|
*p++ = sym;
|
|
}
|
|
len = p - buf;
|
|
break;
|
|
}
|
|
|
|
/* Start transmitter. */
|
|
if (len) {
|
|
outw (cnt_port, len);
|
|
outb (sts_port, BSTS_INTR | BSTS_OWN24);
|
|
c->stat->obytes += len;
|
|
tp->t_state |= TS_BUSY;
|
|
print (("cx%d.%d: out %d bytes to %c\n",
|
|
c->board->num, c->num, len, b));
|
|
}
|
|
}
|
|
|
|
void cxoproc (struct tty *tp)
|
|
{
|
|
int unit = UNIT (tp->t_dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
unsigned short port = c->chip->port;
|
|
int s = spltty ();
|
|
|
|
/* Set current channel number */
|
|
outb (CAR(port), c->num & 3);
|
|
|
|
if (! (tp->t_state & (TS_TIMEOUT | TS_TTSTOP))) {
|
|
/* Start transmitter. */
|
|
if (! (inb (CSR(port)) & CSRA_TXEN))
|
|
cx_cmd (port, CCR_ENTX);
|
|
|
|
/* Determine the buffer order. */
|
|
if (inb (DMABSTS(port)) & DMABSTS_NTBUF) {
|
|
cxout (c, 'B');
|
|
cxout (c, 'A');
|
|
} else {
|
|
cxout (c, 'A');
|
|
cxout (c, 'B');
|
|
}
|
|
}
|
|
#ifndef TS_ASLEEP /* FreeBSD some time after 2.0.5 */
|
|
ttwwakeup(tp);
|
|
#else
|
|
if (RB_LEN (tp->t_out) <= tp->t_lowat) {
|
|
if (tp->t_state & TS_ASLEEP) {
|
|
tp->t_state &= ~TS_ASLEEP;
|
|
wakeup(TSA_OLOWAT(tp));
|
|
}
|
|
selwakeup(&tp->t_wsel);
|
|
}
|
|
#endif
|
|
splx (s);
|
|
}
|
|
|
|
static int
|
|
cxparam (struct tty *tp, struct termios *t)
|
|
{
|
|
int unit = UNIT (tp->t_dev);
|
|
cx_chan_t *c = cxchan[unit];
|
|
unsigned short port = c->chip->port;
|
|
int clock, period, s;
|
|
cx_cor1_async_t cor1;
|
|
|
|
if (t->c_ospeed == 0) {
|
|
/* Clear DTR and RTS. */
|
|
s = spltty ();
|
|
cx_chan_dtr (c, 0);
|
|
cx_chan_rts (c, 0);
|
|
splx (s);
|
|
print (("cx%d.%d: cxparam (hangup)\n", c->board->num, c->num));
|
|
return (0);
|
|
}
|
|
print (("cx%d.%d: cxparam\n", c->board->num, c->num));
|
|
|
|
/* Check requested parameters. */
|
|
if (t->c_ospeed < 300 || t->c_ospeed > 256*1024)
|
|
return(EINVAL);
|
|
if (t->c_ispeed && (t->c_ispeed < 300 || t->c_ispeed > 256*1024))
|
|
return(EINVAL);
|
|
|
|
#ifdef __bsdi__
|
|
/* CLOCAL flag set -- wakeup everybody who waits for CD. */
|
|
/* FreeBSD does this themselves. */
|
|
if (! (tp->t_cflag & CLOCAL) && (t->c_cflag & CLOCAL))
|
|
wakeup ((caddr_t) &tp->t_rawq);
|
|
#endif
|
|
/* And copy them to tty and channel structures. */
|
|
c->rxbaud = tp->t_ispeed = t->c_ispeed;
|
|
c->txbaud = tp->t_ospeed = t->c_ospeed;
|
|
tp->t_cflag = t->c_cflag;
|
|
|
|
/* Set character length and parity mode. */
|
|
BYTE cor1 = 0;
|
|
switch (t->c_cflag & CSIZE) {
|
|
default:
|
|
case CS8: cor1.charlen = 7; break;
|
|
case CS7: cor1.charlen = 6; break;
|
|
case CS6: cor1.charlen = 5; break;
|
|
case CS5: cor1.charlen = 4; break;
|
|
}
|
|
if (t->c_cflag & PARENB) {
|
|
cor1.parmode = PARM_NORMAL;
|
|
cor1.ignpar = 0;
|
|
cor1.parity = (t->c_cflag & PARODD) ? PAR_ODD : PAR_EVEN;
|
|
} else {
|
|
cor1.parmode = PARM_NOPAR;
|
|
cor1.ignpar = 1;
|
|
}
|
|
|
|
/* Enable/disable hardware CTS. */
|
|
c->aopt.cor2.ctsae = (t->c_cflag & CRTSCTS) ? 1 : 0;
|
|
/* Handle DSR as CTS. */
|
|
c->aopt.cor2.dsrae = (t->c_cflag & CRTSCTS) ? 1 : 0;
|
|
/* Enable extended transmit command mode.
|
|
* Unfortunately, there is no other method for sending break. */
|
|
c->aopt.cor2.etc = 1;
|
|
/* Enable/disable hardware XON/XOFF. */
|
|
c->aopt.cor2.ixon = (t->c_iflag & IXON) ? 1 : 0;
|
|
c->aopt.cor2.ixany = (t->c_iflag & IXANY) ? 1 : 0;
|
|
|
|
/* Set the number of stop bits. */
|
|
if (t->c_cflag & CSTOPB)
|
|
c->aopt.cor3.stopb = STOPB_2;
|
|
else
|
|
c->aopt.cor3.stopb = STOPB_1;
|
|
/* Disable/enable passing XON/XOFF chars to the host. */
|
|
c->aopt.cor3.scde = (t->c_iflag & IXON) ? 1 : 0;
|
|
c->aopt.cor3.flowct = (t->c_iflag & IXON) ? FLOWCC_NOTPASS : FLOWCC_PASS;
|
|
|
|
c->aopt.schr1 = t->c_cc[VSTART]; /* XON */
|
|
c->aopt.schr2 = t->c_cc[VSTOP]; /* XOFF */
|
|
|
|
/* Set current channel number. */
|
|
s = spltty ();
|
|
outb (CAR(port), c->num & 3);
|
|
|
|
/* Set up receiver clock values. */
|
|
cx_clock (c->chip->oscfreq, c->rxbaud, &clock, &period);
|
|
c->opt.rcor.clk = clock;
|
|
outb (RCOR(port), BYTE c->opt.rcor);
|
|
outb (RBPR(port), period);
|
|
|
|
/* Set up transmitter clock values. */
|
|
cx_clock (c->chip->oscfreq, c->txbaud, &clock, &period);
|
|
c->opt.tcor.clk = clock;
|
|
c->opt.tcor.ext1x = 0;
|
|
outb (TCOR(port), BYTE c->opt.tcor);
|
|
outb (TBPR(port), period);
|
|
|
|
outb (COR2(port), BYTE c->aopt.cor2);
|
|
outb (COR3(port), BYTE c->aopt.cor3);
|
|
outb (SCHR1(port), c->aopt.schr1);
|
|
outb (SCHR2(port), c->aopt.schr2);
|
|
|
|
if (BYTE c->aopt.cor1 != BYTE cor1) {
|
|
BYTE c->aopt.cor1 = BYTE cor1;
|
|
outb (COR1(port), BYTE c->aopt.cor1);
|
|
/* Any change to COR1 require reinitialization. */
|
|
/* Unfortunately, it may cause transmitter glitches... */
|
|
cx_cmd (port, CCR_INITCH);
|
|
}
|
|
splx (s);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Stop output on a line
|
|
*/
|
|
void cxstop (struct tty *tp, int flag)
|
|
{
|
|
cx_chan_t *c = cxchan[UNIT(tp->t_dev)];
|
|
unsigned short port = c->chip->port;
|
|
int s = spltty ();
|
|
|
|
if (tp->t_state & TS_BUSY) {
|
|
print (("cx%d.%d: cxstop\n", c->board->num, c->num));
|
|
|
|
/* Set current channel number */
|
|
outb (CAR(port), c->num & 3);
|
|
|
|
/* Stop transmitter */
|
|
cx_cmd (port, CCR_DISTX);
|
|
}
|
|
splx (s);
|
|
}
|
|
|
|
/*
|
|
* Handle receive interrupts, including receive errors and
|
|
* receive timeout interrupt.
|
|
*/
|
|
int cxrinta (cx_chan_t *c)
|
|
{
|
|
unsigned short port = c->chip->port;
|
|
unsigned short len = 0, risr = inw (RISR(port)), reoir = 0;
|
|
struct tty *tp = c->ttyp;
|
|
|
|
/* Compute optimal receiver buffer length. */
|
|
int rbsz = (c->rxbaud + 800 - 1) / 800 * 2;
|
|
if (rbsz < 4)
|
|
rbsz = 4;
|
|
else if (rbsz > DMABUFSZ)
|
|
rbsz = DMABUFSZ;
|
|
|
|
if (risr & RISA_TIMEOUT) {
|
|
unsigned long rcbadr = (unsigned short) inw (RCBADRL(port)) |
|
|
(long) inw (RCBADRU(port)) << 16;
|
|
unsigned char *buf = 0;
|
|
unsigned short cnt_port = 0, sts_port = 0;
|
|
if (rcbadr >= c->brphys && rcbadr < c->brphys+DMABUFSZ) {
|
|
buf = c->brbuf;
|
|
len = rcbadr - c->brphys;
|
|
cnt_port = BRBCNT(port);
|
|
sts_port = BRBSTS(port);
|
|
} else if (rcbadr >= c->arphys && rcbadr < c->arphys+DMABUFSZ) {
|
|
buf = c->arbuf;
|
|
len = rcbadr - c->arphys;
|
|
cnt_port = ARBCNT(port);
|
|
sts_port = ARBSTS(port);
|
|
} else
|
|
printf ("cx%d.%d: timeout: invalid buffer address\n",
|
|
c->board->num, c->num);
|
|
|
|
if (len) {
|
|
print (("cx%d.%d: async receive timeout (%d bytes), risr=%b, arbsts=%b, brbsts=%b\n",
|
|
c->board->num, c->num, len, risr, RISA_BITS,
|
|
inb (ARBSTS(port)), BSTS_BITS, inb (BRBSTS(port)), BSTS_BITS));
|
|
c->stat->ibytes += len;
|
|
if (tp && (tp->t_state & TS_ISOPEN)) {
|
|
int i;
|
|
int (*rint)(int, struct tty *) =
|
|
linesw[tp->t_line].l_rint;
|
|
|
|
for (i=0; i<len; ++i)
|
|
(*rint) (buf[i], tp);
|
|
}
|
|
|
|
/* Restart receiver. */
|
|
outw (cnt_port, rbsz);
|
|
outb (sts_port, BSTS_OWN24);
|
|
}
|
|
return (REOI_TERMBUFF);
|
|
}
|
|
|
|
print (("cx%d.%d: async receive interrupt, risr=%b, arbsts=%b, brbsts=%b\n",
|
|
c->board->num, c->num, risr, RISA_BITS,
|
|
inb (ARBSTS(port)), BSTS_BITS, inb (BRBSTS(port)), BSTS_BITS));
|
|
|
|
if (risr & RIS_BUSERR) {
|
|
printf ("cx%d.%d: receive bus error\n", c->board->num, c->num);
|
|
++c->stat->ierrs;
|
|
}
|
|
if (risr & (RIS_OVERRUN | RISA_PARERR | RISA_FRERR | RISA_BREAK)) {
|
|
int err = 0;
|
|
|
|
if (risr & RISA_PARERR)
|
|
err |= TTY_PE;
|
|
if (risr & RISA_FRERR)
|
|
err |= TTY_FE;
|
|
#ifdef TTY_OE
|
|
if (risr & RIS_OVERRUN)
|
|
err |= TTY_OE;
|
|
#endif
|
|
#ifdef TTY_BI
|
|
if (risr & RISA_BREAK)
|
|
err |= TTY_BI;
|
|
#endif
|
|
print (("cx%d.%d: receive error %x\n", c->board->num, c->num, err));
|
|
if (tp && (tp->t_state & TS_ISOPEN))
|
|
(*linesw[tp->t_line].l_rint) (err, tp);
|
|
++c->stat->ierrs;
|
|
}
|
|
|
|
/* Discard exception characters. */
|
|
if ((risr & RISA_SCMASK) && tp && (tp->t_iflag & IXON))
|
|
reoir |= REOI_DISCEXC;
|
|
|
|
/* Handle received data. */
|
|
if ((risr & RIS_EOBUF) && tp && (tp->t_state & TS_ISOPEN)) {
|
|
int (*rint)(int, struct tty *) = linesw[tp->t_line].l_rint;
|
|
unsigned char *buf;
|
|
int i;
|
|
|
|
len = (risr & RIS_BB) ? inw(BRBCNT(port)) : inw(ARBCNT(port));
|
|
|
|
print (("cx%d.%d: async: %d bytes received\n",
|
|
c->board->num, c->num, len));
|
|
c->stat->ibytes += len;
|
|
|
|
buf = (risr & RIS_BB) ? c->brbuf : c->arbuf;
|
|
for (i=0; i<len; ++i)
|
|
(*rint) (buf[i], tp);
|
|
}
|
|
|
|
/* Restart receiver. */
|
|
if (! (inb (ARBSTS(port)) & BSTS_OWN24)) {
|
|
outw (ARBCNT(port), rbsz);
|
|
outb (ARBSTS(port), BSTS_OWN24);
|
|
}
|
|
if (! (inb (BRBSTS(port)) & BSTS_OWN24)) {
|
|
outw (BRBCNT(port), rbsz);
|
|
outb (BRBSTS(port), BSTS_OWN24);
|
|
}
|
|
return (reoir);
|
|
}
|
|
|
|
/*
|
|
* Handle transmit interrupt.
|
|
*/
|
|
void cxtinta (cx_chan_t *c)
|
|
{
|
|
struct tty *tp = c->ttyp;
|
|
unsigned short port = c->chip->port;
|
|
unsigned char tisr = inb (TISR(port));
|
|
|
|
print (("cx%d.%d: async transmit interrupt, tisr=%b, atbsts=%b, btbsts=%b\n",
|
|
c->board->num, c->num, tisr, TIS_BITS,
|
|
inb (ATBSTS(port)), BSTS_BITS, inb (BTBSTS(port)), BSTS_BITS));
|
|
|
|
if (tisr & TIS_BUSERR) {
|
|
printf ("cx%d.%d: transmit bus error\n",
|
|
c->board->num, c->num);
|
|
++c->stat->oerrs;
|
|
} else if (tisr & TIS_UNDERRUN) {
|
|
printf ("cx%d.%d: transmit underrun error\n",
|
|
c->board->num, c->num);
|
|
++c->stat->oerrs;
|
|
}
|
|
if (tp) {
|
|
tp->t_state &= ~(TS_BUSY | TS_FLUSH);
|
|
if (tp->t_line)
|
|
(*linesw[tp->t_line].l_start) (tp);
|
|
else
|
|
cxoproc (tp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle modem interrupt.
|
|
*/
|
|
void cxmint (cx_chan_t *c)
|
|
{
|
|
unsigned short port = c->chip->port;
|
|
unsigned char misr = inb (MISR(port));
|
|
unsigned char msvr = inb (MSVR(port));
|
|
struct tty *tp = c->ttyp;
|
|
|
|
if (c->mode != M_ASYNC) {
|
|
printf ("cx%d.%d: unexpected modem interrupt, misr=%b, msvr=%b\n",
|
|
c->board->num, c->num, misr, MIS_BITS, msvr, MSV_BITS);
|
|
return;
|
|
}
|
|
print (("cx%d.%d: modem interrupt, misr=%b, msvr=%b\n",
|
|
c->board->num, c->num, misr, MIS_BITS, msvr, MSV_BITS));
|
|
|
|
/* Ignore DSR events. */
|
|
/* Ignore RTC/CTS events, handled by hardware. */
|
|
/* Handle carrier detect/loss. */
|
|
if (tp && (misr & MIS_CCD))
|
|
(*linesw[tp->t_line].l_modem) (tp, (msvr & MSV_CD) != 0);
|
|
}
|
|
|
|
/*
|
|
* Recover after lost transmit interrupts.
|
|
*/
|
|
void cxtimeout (void *a)
|
|
{
|
|
cx_board_t *b;
|
|
cx_chan_t *c;
|
|
struct tty *tp;
|
|
int s;
|
|
|
|
for (b=cxboard; b<cxboard+NCX; ++b)
|
|
for (c=b->chan; c<b->chan+NCHAN; ++c) {
|
|
tp = c->ttyp;
|
|
if (c->type==T_NONE || c->mode!=M_ASYNC || !tp)
|
|
continue;
|
|
s = spltty ();
|
|
if (tp->t_state & TS_BUSY) {
|
|
tp->t_state &= ~TS_BUSY;
|
|
if (tp->t_line)
|
|
(*linesw[tp->t_line].l_start) (tp);
|
|
else
|
|
cxoproc (tp);
|
|
}
|
|
splx (s);
|
|
}
|
|
timeout (cxtimeout, 0, hz*5);
|
|
}
|
|
|
|
|
|
#if defined(__FreeBSD__) && (__FreeBSD__ > 1 )
|
|
static void cx_drvinit(void *unused)
|
|
{
|
|
|
|
cdevsw_add(&cx_cdevsw);
|
|
}
|
|
|
|
SYSINIT(cxdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,cx_drvinit,NULL)
|
|
|
|
|
|
#endif
|