mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-21 11:13:30 +00:00
c25290420e
from the FreeBSD network code. The flag is still kept around in the "sys/mbuf.h" header file, but does no longer have any users. Instead the "m_pkthdr.rsstype" field in the mbuf structure is now used to decide the meaning of the "m_pkthdr.flowid" field. To modify the "m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX" macros as defined in the "sys/mbuf.h" header file. This patch introduces new behaviour in the transmit direction. Previously network drivers checked if "M_FLOWID" was set in "m_flags" before using the "m_pkthdr.flowid" field. This check has now now been replaced by checking if "M_HASHTYPE_GET(m)" is different from "M_HASHTYPE_NONE". In the future more hashtypes will be added, for example hashtypes for hardware dedicated flows. "M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is valid and has no particular type. This change removes the need for an "if" statement in TCP transmit code checking for the presence of a valid flowid value. The "if" statement mentioned above is now a direct variable assignment which is then later checked by the respective network drivers like before. Additional notes: - The SCTP code changes will be committed as a separate patch. - Removal of the "M_FLOWID" flag will also be done separately. - The FreeBSD version has been bumped. MFC after: 1 month Sponsored by: Mellanox Technologies
4202 lines
102 KiB
C
4202 lines
102 KiB
C
/*-
|
|
* Copyright(c) 2002-2011 Exar Corp.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification are permitted provided the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the Exar Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*$FreeBSD$*/
|
|
|
|
#include <dev/vxge/vxge.h>
|
|
|
|
static int vxge_pci_bd_no = -1;
|
|
static u32 vxge_drv_copyright = 0;
|
|
static u32 vxge_dev_ref_count = 0;
|
|
static u32 vxge_dev_req_reboot = 0;
|
|
|
|
static int vpath_selector[VXGE_HAL_MAX_VIRTUAL_PATHS] = \
|
|
{0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31};
|
|
|
|
/*
|
|
* vxge_probe
|
|
* Probes for x3100 devices
|
|
*/
|
|
int
|
|
vxge_probe(device_t ndev)
|
|
{
|
|
int err = ENXIO;
|
|
|
|
u16 pci_bd_no = 0;
|
|
u16 pci_vendor_id = 0;
|
|
u16 pci_device_id = 0;
|
|
|
|
char adapter_name[64];
|
|
|
|
pci_vendor_id = pci_get_vendor(ndev);
|
|
if (pci_vendor_id != VXGE_PCI_VENDOR_ID)
|
|
goto _exit0;
|
|
|
|
pci_device_id = pci_get_device(ndev);
|
|
|
|
if (pci_device_id == VXGE_PCI_DEVICE_ID_TITAN_1) {
|
|
|
|
pci_bd_no = (pci_get_bus(ndev) | pci_get_slot(ndev));
|
|
|
|
snprintf(adapter_name, sizeof(adapter_name),
|
|
VXGE_ADAPTER_NAME, pci_get_revid(ndev));
|
|
device_set_desc_copy(ndev, adapter_name);
|
|
|
|
if (!vxge_drv_copyright) {
|
|
device_printf(ndev, VXGE_COPYRIGHT);
|
|
vxge_drv_copyright = 1;
|
|
}
|
|
|
|
if (vxge_dev_req_reboot == 0) {
|
|
vxge_pci_bd_no = pci_bd_no;
|
|
err = BUS_PROBE_DEFAULT;
|
|
} else {
|
|
if (pci_bd_no != vxge_pci_bd_no) {
|
|
vxge_pci_bd_no = pci_bd_no;
|
|
err = BUS_PROBE_DEFAULT;
|
|
}
|
|
}
|
|
}
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_attach
|
|
* Connects driver to the system if probe was success @ndev handle
|
|
*/
|
|
int
|
|
vxge_attach(device_t ndev)
|
|
{
|
|
int err = 0;
|
|
vxge_dev_t *vdev;
|
|
vxge_hal_device_t *hldev = NULL;
|
|
vxge_hal_device_attr_t device_attr;
|
|
vxge_free_resources_e error_level = VXGE_FREE_NONE;
|
|
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
/* Get per-ndev buffer */
|
|
vdev = (vxge_dev_t *) device_get_softc(ndev);
|
|
if (!vdev)
|
|
goto _exit0;
|
|
|
|
bzero(vdev, sizeof(vxge_dev_t));
|
|
|
|
vdev->ndev = ndev;
|
|
strlcpy(vdev->ndev_name, "vxge", sizeof(vdev->ndev_name));
|
|
|
|
err = vxge_driver_config(vdev);
|
|
if (err != 0)
|
|
goto _exit0;
|
|
|
|
/* Initialize HAL driver */
|
|
status = vxge_driver_init(vdev);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev, "Failed to initialize driver\n");
|
|
goto _exit0;
|
|
}
|
|
/* Enable PCI bus-master */
|
|
pci_enable_busmaster(ndev);
|
|
|
|
/* Allocate resources */
|
|
err = vxge_alloc_resources(vdev);
|
|
if (err != 0) {
|
|
device_printf(vdev->ndev, "resource allocation failed\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
err = vxge_device_hw_info_get(vdev);
|
|
if (err != 0) {
|
|
error_level = VXGE_FREE_BAR2;
|
|
goto _exit0;
|
|
}
|
|
|
|
/* Get firmware default values for Device Configuration */
|
|
vxge_hal_device_config_default_get(vdev->device_config);
|
|
|
|
/* Customize Device Configuration based on User request */
|
|
vxge_vpath_config(vdev);
|
|
|
|
/* Allocate ISR resources */
|
|
err = vxge_alloc_isr_resources(vdev);
|
|
if (err != 0) {
|
|
error_level = VXGE_FREE_ISR_RESOURCE;
|
|
device_printf(vdev->ndev, "isr resource allocation failed\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
/* HAL attributes */
|
|
device_attr.bar0 = (u8 *) vdev->pdev->bar_info[0];
|
|
device_attr.bar1 = (u8 *) vdev->pdev->bar_info[1];
|
|
device_attr.bar2 = (u8 *) vdev->pdev->bar_info[2];
|
|
device_attr.regh0 = (vxge_bus_res_t *) vdev->pdev->reg_map[0];
|
|
device_attr.regh1 = (vxge_bus_res_t *) vdev->pdev->reg_map[1];
|
|
device_attr.regh2 = (vxge_bus_res_t *) vdev->pdev->reg_map[2];
|
|
device_attr.irqh = (pci_irq_h) vdev->config.isr_info[0].irq_handle;
|
|
device_attr.cfgh = vdev->pdev;
|
|
device_attr.pdev = vdev->pdev;
|
|
|
|
/* Initialize HAL Device */
|
|
status = vxge_hal_device_initialize((vxge_hal_device_h *) &hldev,
|
|
&device_attr, vdev->device_config);
|
|
if (status != VXGE_HAL_OK) {
|
|
error_level = VXGE_FREE_ISR_RESOURCE;
|
|
device_printf(vdev->ndev, "hal device initialization failed\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
vdev->devh = hldev;
|
|
vxge_hal_device_private_set(hldev, vdev);
|
|
|
|
if (vdev->is_privilaged) {
|
|
err = vxge_firmware_verify(vdev);
|
|
if (err != 0) {
|
|
vxge_dev_req_reboot = 1;
|
|
error_level = VXGE_FREE_TERMINATE_DEVICE;
|
|
goto _exit0;
|
|
}
|
|
}
|
|
|
|
/* Allocate memory for vpath */
|
|
vdev->vpaths = (vxge_vpath_t *)
|
|
vxge_mem_alloc(vdev->no_of_vpath * sizeof(vxge_vpath_t));
|
|
|
|
if (vdev->vpaths == NULL) {
|
|
error_level = VXGE_FREE_TERMINATE_DEVICE;
|
|
device_printf(vdev->ndev, "vpath memory allocation failed\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
vdev->no_of_func = 1;
|
|
if (vdev->is_privilaged) {
|
|
|
|
vxge_hal_func_mode_count(vdev->devh,
|
|
vdev->config.hw_info.function_mode, &vdev->no_of_func);
|
|
|
|
vxge_bw_priority_config(vdev);
|
|
}
|
|
|
|
/* Initialize mutexes */
|
|
vxge_mutex_init(vdev);
|
|
|
|
/* Initialize Media */
|
|
vxge_media_init(vdev);
|
|
|
|
err = vxge_ifp_setup(ndev);
|
|
if (err != 0) {
|
|
error_level = VXGE_FREE_MEDIA;
|
|
device_printf(vdev->ndev, "setting up interface failed\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
err = vxge_isr_setup(vdev);
|
|
if (err != 0) {
|
|
error_level = VXGE_FREE_INTERFACE;
|
|
device_printf(vdev->ndev,
|
|
"failed to associate interrupt handler with device\n");
|
|
goto _exit0;
|
|
}
|
|
vxge_device_hw_info_print(vdev);
|
|
vdev->is_active = TRUE;
|
|
|
|
_exit0:
|
|
if (error_level) {
|
|
vxge_free_resources(ndev, error_level);
|
|
err = ENXIO;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_detach
|
|
* Detaches driver from the Kernel subsystem
|
|
*/
|
|
int
|
|
vxge_detach(device_t ndev)
|
|
{
|
|
vxge_dev_t *vdev;
|
|
|
|
vdev = (vxge_dev_t *) device_get_softc(ndev);
|
|
if (vdev->is_active) {
|
|
vdev->is_active = FALSE;
|
|
vxge_stop(vdev);
|
|
vxge_free_resources(ndev, VXGE_FREE_ALL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* vxge_shutdown
|
|
* To shutdown device before system shutdown
|
|
*/
|
|
int
|
|
vxge_shutdown(device_t ndev)
|
|
{
|
|
vxge_dev_t *vdev = (vxge_dev_t *) device_get_softc(ndev);
|
|
vxge_stop(vdev);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* vxge_init
|
|
* Initialize the interface
|
|
*/
|
|
void
|
|
vxge_init(void *vdev_ptr)
|
|
{
|
|
vxge_dev_t *vdev = (vxge_dev_t *) vdev_ptr;
|
|
|
|
VXGE_DRV_LOCK(vdev);
|
|
vxge_init_locked(vdev);
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
}
|
|
|
|
/*
|
|
* vxge_init_locked
|
|
* Initialize the interface
|
|
*/
|
|
void
|
|
vxge_init_locked(vxge_dev_t *vdev)
|
|
{
|
|
int i, err = EINVAL;
|
|
vxge_hal_device_t *hldev = vdev->devh;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
vxge_hal_vpath_h vpath_handle;
|
|
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
/* If device is in running state, initializing is not required */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
goto _exit0;
|
|
|
|
VXGE_DRV_LOCK_ASSERT(vdev);
|
|
|
|
/* Opening vpaths */
|
|
err = vxge_vpath_open(vdev);
|
|
if (err != 0)
|
|
goto _exit1;
|
|
|
|
if (vdev->config.rth_enable) {
|
|
status = vxge_rth_config(vdev);
|
|
if (status != VXGE_HAL_OK)
|
|
goto _exit1;
|
|
}
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath_handle = vxge_vpath_handle_get(vdev, i);
|
|
if (!vpath_handle)
|
|
continue;
|
|
|
|
/* check initial mtu before enabling the device */
|
|
status = vxge_hal_device_mtu_check(vpath_handle, ifp->if_mtu);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev,
|
|
"invalid mtu size %u specified\n", ifp->if_mtu);
|
|
goto _exit1;
|
|
}
|
|
|
|
status = vxge_hal_vpath_mtu_set(vpath_handle, ifp->if_mtu);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev,
|
|
"setting mtu in device failed\n");
|
|
goto _exit1;
|
|
}
|
|
}
|
|
|
|
/* Enable HAL device */
|
|
status = vxge_hal_device_enable(hldev);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev, "failed to enable device\n");
|
|
goto _exit1;
|
|
}
|
|
|
|
if (vdev->config.intr_mode == VXGE_HAL_INTR_MODE_MSIX)
|
|
vxge_msix_enable(vdev);
|
|
|
|
/* Checksum capability */
|
|
ifp->if_hwassist = 0;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM)
|
|
ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP);
|
|
|
|
if (ifp->if_capenable & IFCAP_TSO4)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath_handle = vxge_vpath_handle_get(vdev, i);
|
|
if (!vpath_handle)
|
|
continue;
|
|
|
|
/* Enabling mcast for all vpath */
|
|
vxge_hal_vpath_mcast_enable(vpath_handle);
|
|
|
|
/* Enabling bcast for all vpath */
|
|
status = vxge_hal_vpath_bcast_enable(vpath_handle);
|
|
if (status != VXGE_HAL_OK)
|
|
device_printf(vdev->ndev,
|
|
"can't enable bcast on vpath (%d)\n", i);
|
|
}
|
|
|
|
/* Enable interrupts */
|
|
vxge_hal_device_intr_enable(vdev->devh);
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath_handle = vxge_vpath_handle_get(vdev, i);
|
|
if (!vpath_handle)
|
|
continue;
|
|
|
|
bzero(&(vdev->vpaths[i].driver_stats),
|
|
sizeof(vxge_drv_stats_t));
|
|
status = vxge_hal_vpath_enable(vpath_handle);
|
|
if (status != VXGE_HAL_OK)
|
|
goto _exit2;
|
|
}
|
|
|
|
vxge_os_mdelay(1000);
|
|
|
|
/* Device is initialized */
|
|
vdev->is_initialized = TRUE;
|
|
|
|
/* Now inform the stack we're ready */
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
|
|
goto _exit0;
|
|
|
|
_exit2:
|
|
vxge_hal_device_intr_disable(vdev->devh);
|
|
vxge_hal_device_disable(hldev);
|
|
|
|
_exit1:
|
|
vxge_vpath_close(vdev);
|
|
|
|
_exit0:
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* vxge_driver_init
|
|
* Initializes HAL driver
|
|
*/
|
|
vxge_hal_status_e
|
|
vxge_driver_init(vxge_dev_t *vdev)
|
|
{
|
|
vxge_hal_uld_cbs_t uld_callbacks;
|
|
vxge_hal_driver_config_t driver_config;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
/* Initialize HAL driver */
|
|
if (!vxge_dev_ref_count) {
|
|
bzero(&uld_callbacks, sizeof(vxge_hal_uld_cbs_t));
|
|
bzero(&driver_config, sizeof(vxge_hal_driver_config_t));
|
|
|
|
uld_callbacks.link_up = vxge_link_up;
|
|
uld_callbacks.link_down = vxge_link_down;
|
|
uld_callbacks.crit_err = vxge_crit_error;
|
|
uld_callbacks.sched_timer = NULL;
|
|
uld_callbacks.xpak_alarm_log = NULL;
|
|
|
|
status = vxge_hal_driver_initialize(&driver_config,
|
|
&uld_callbacks);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev,
|
|
"failed to initialize driver\n");
|
|
goto _exit0;
|
|
}
|
|
}
|
|
vxge_hal_driver_debug_set(VXGE_TRACE);
|
|
vxge_dev_ref_count++;
|
|
|
|
_exit0:
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* vxge_driver_config
|
|
*/
|
|
int
|
|
vxge_driver_config(vxge_dev_t *vdev)
|
|
{
|
|
int i, err = 0;
|
|
char temp_buffer[30];
|
|
|
|
vxge_bw_info_t bw_info;
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.no_of_vpath", vdev->config,
|
|
no_of_vpath, VXGE_DEFAULT_USER_HARDCODED);
|
|
|
|
if (vdev->config.no_of_vpath == VXGE_DEFAULT_USER_HARDCODED)
|
|
vdev->config.no_of_vpath = mp_ncpus;
|
|
|
|
if (vdev->config.no_of_vpath <= 0) {
|
|
err = EINVAL;
|
|
device_printf(vdev->ndev,
|
|
"Failed to load driver, \
|
|
invalid config : \'no_of_vpath\'\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.intr_coalesce", vdev->config,
|
|
intr_coalesce, VXGE_DEFAULT_CONFIG_DISABLE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.rth_enable", vdev->config,
|
|
rth_enable, VXGE_DEFAULT_CONFIG_ENABLE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.rth_bkt_sz", vdev->config,
|
|
rth_bkt_sz, VXGE_DEFAULT_RTH_BUCKET_SIZE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.lro_enable", vdev->config,
|
|
lro_enable, VXGE_DEFAULT_CONFIG_ENABLE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.tso_enable", vdev->config,
|
|
tso_enable, VXGE_DEFAULT_CONFIG_ENABLE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.tx_steering", vdev->config,
|
|
tx_steering, VXGE_DEFAULT_CONFIG_DISABLE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.msix_enable", vdev->config,
|
|
intr_mode, VXGE_HAL_INTR_MODE_MSIX);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.ifqmaxlen", vdev->config,
|
|
ifq_maxlen, VXGE_DEFAULT_CONFIG_IFQ_MAXLEN);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.port_mode", vdev->config,
|
|
port_mode, VXGE_DEFAULT_CONFIG_VALUE);
|
|
|
|
if (vdev->config.port_mode == VXGE_DEFAULT_USER_HARDCODED)
|
|
vdev->config.port_mode = VXGE_DEFAULT_CONFIG_VALUE;
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.l2_switch", vdev->config,
|
|
l2_switch, VXGE_DEFAULT_CONFIG_VALUE);
|
|
|
|
if (vdev->config.l2_switch == VXGE_DEFAULT_USER_HARDCODED)
|
|
vdev->config.l2_switch = VXGE_DEFAULT_CONFIG_VALUE;
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.fw_upgrade", vdev->config,
|
|
fw_option, VXGE_FW_UPGRADE_ALL);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.low_latency", vdev->config,
|
|
low_latency, VXGE_DEFAULT_CONFIG_DISABLE);
|
|
|
|
VXGE_GET_PARAM("hint.vxge.0.func_mode", vdev->config,
|
|
function_mode, VXGE_DEFAULT_CONFIG_VALUE);
|
|
|
|
if (vdev->config.function_mode == VXGE_DEFAULT_USER_HARDCODED)
|
|
vdev->config.function_mode = VXGE_DEFAULT_CONFIG_VALUE;
|
|
|
|
if (!(is_multi_func(vdev->config.function_mode) ||
|
|
is_single_func(vdev->config.function_mode)))
|
|
vdev->config.function_mode = VXGE_DEFAULT_CONFIG_VALUE;
|
|
|
|
for (i = 0; i < VXGE_HAL_MAX_FUNCTIONS; i++) {
|
|
|
|
bw_info.func_id = i;
|
|
|
|
sprintf(temp_buffer, "hint.vxge.0.bandwidth_%d", i);
|
|
VXGE_GET_PARAM(temp_buffer, bw_info,
|
|
bandwidth, VXGE_DEFAULT_USER_HARDCODED);
|
|
|
|
if (bw_info.bandwidth == VXGE_DEFAULT_USER_HARDCODED)
|
|
bw_info.bandwidth = VXGE_HAL_VPATH_BW_LIMIT_DEFAULT;
|
|
|
|
sprintf(temp_buffer, "hint.vxge.0.priority_%d", i);
|
|
VXGE_GET_PARAM(temp_buffer, bw_info,
|
|
priority, VXGE_DEFAULT_USER_HARDCODED);
|
|
|
|
if (bw_info.priority == VXGE_DEFAULT_USER_HARDCODED)
|
|
bw_info.priority = VXGE_HAL_VPATH_PRIORITY_DEFAULT;
|
|
|
|
vxge_os_memcpy(&vdev->config.bw_info[i], &bw_info,
|
|
sizeof(vxge_bw_info_t));
|
|
}
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_stop
|
|
*/
|
|
void
|
|
vxge_stop(vxge_dev_t *vdev)
|
|
{
|
|
VXGE_DRV_LOCK(vdev);
|
|
vxge_stop_locked(vdev);
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
}
|
|
|
|
/*
|
|
* vxge_stop_locked
|
|
* Common code for both stop and part of reset.
|
|
* disables device, interrupts and closes vpaths handle
|
|
*/
|
|
void
|
|
vxge_stop_locked(vxge_dev_t *vdev)
|
|
{
|
|
u64 adapter_status = 0;
|
|
vxge_hal_status_e status;
|
|
vxge_hal_device_t *hldev = vdev->devh;
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
VXGE_DRV_LOCK_ASSERT(vdev);
|
|
|
|
/* If device is not in "Running" state, return */
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
|
|
return;
|
|
|
|
/* Set appropriate flags */
|
|
vdev->is_initialized = FALSE;
|
|
hldev->link_state = VXGE_HAL_LINK_NONE;
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
|
|
/* Disable interrupts */
|
|
vxge_hal_device_intr_disable(hldev);
|
|
|
|
/* Disable HAL device */
|
|
status = vxge_hal_device_disable(hldev);
|
|
if (status != VXGE_HAL_OK) {
|
|
vxge_hal_device_status(hldev, &adapter_status);
|
|
device_printf(vdev->ndev,
|
|
"adapter status: 0x%llx\n", adapter_status);
|
|
}
|
|
|
|
/* reset vpaths */
|
|
vxge_vpath_reset(vdev);
|
|
|
|
vxge_os_mdelay(1000);
|
|
|
|
/* Close Vpaths */
|
|
vxge_vpath_close(vdev);
|
|
}
|
|
|
|
void
|
|
vxge_send(ifnet_t ifp)
|
|
{
|
|
vxge_vpath_t *vpath;
|
|
vxge_dev_t *vdev = (vxge_dev_t *) ifp->if_softc;
|
|
|
|
vpath = &(vdev->vpaths[0]);
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
if (VXGE_TX_TRYLOCK(vpath)) {
|
|
vxge_send_locked(ifp, vpath);
|
|
VXGE_TX_UNLOCK(vpath);
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
vxge_send_locked(ifnet_t ifp, vxge_vpath_t *vpath)
|
|
{
|
|
mbuf_t m_head = NULL;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
VXGE_TX_LOCK_ASSERT(vpath);
|
|
|
|
if ((!vdev->is_initialized) ||
|
|
((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING))
|
|
return;
|
|
|
|
while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (vxge_xmit(ifp, vpath, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
VXGE_DRV_STATS(vpath, tx_again);
|
|
break;
|
|
}
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
}
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
|
|
int
|
|
vxge_mq_send(ifnet_t ifp, mbuf_t m_head)
|
|
{
|
|
int i = 0, err = 0;
|
|
|
|
vxge_vpath_t *vpath;
|
|
vxge_dev_t *vdev = (vxge_dev_t *) ifp->if_softc;
|
|
|
|
if (vdev->config.tx_steering) {
|
|
i = vxge_vpath_get(vdev, m_head);
|
|
} else if (M_HASHTYPE_GET(m_head) != M_HASHTYPE_NONE) {
|
|
i = m_head->m_pkthdr.flowid % vdev->no_of_vpath;
|
|
}
|
|
|
|
vpath = &(vdev->vpaths[i]);
|
|
if (VXGE_TX_TRYLOCK(vpath)) {
|
|
err = vxge_mq_send_locked(ifp, vpath, m_head);
|
|
VXGE_TX_UNLOCK(vpath);
|
|
} else
|
|
err = drbr_enqueue(ifp, vpath->br, m_head);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static inline int
|
|
vxge_mq_send_locked(ifnet_t ifp, vxge_vpath_t *vpath, mbuf_t m_head)
|
|
{
|
|
int err = 0;
|
|
mbuf_t next = NULL;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
VXGE_TX_LOCK_ASSERT(vpath);
|
|
|
|
if ((!vdev->is_initialized) ||
|
|
((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)) {
|
|
err = drbr_enqueue(ifp, vpath->br, m_head);
|
|
goto _exit0;
|
|
}
|
|
if (m_head == NULL) {
|
|
next = drbr_dequeue(ifp, vpath->br);
|
|
} else if (drbr_needs_enqueue(ifp, vpath->br)) {
|
|
if ((err = drbr_enqueue(ifp, vpath->br, m_head)) != 0)
|
|
goto _exit0;
|
|
next = drbr_dequeue(ifp, vpath->br);
|
|
} else
|
|
next = m_head;
|
|
|
|
/* Process the queue */
|
|
while (next != NULL) {
|
|
if ((err = vxge_xmit(ifp, vpath, &next)) != 0) {
|
|
if (next == NULL)
|
|
break;
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
err = drbr_enqueue(ifp, vpath->br, next);
|
|
VXGE_DRV_STATS(vpath, tx_again);
|
|
break;
|
|
}
|
|
if_inc_counter(ifp, IFCOUNTER_OBYTES, next->m_pkthdr.len);
|
|
if (next->m_flags & M_MCAST)
|
|
if_inc_counter(ifp, IFCOUNTER_OMCASTS, 1);
|
|
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, next);
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
|
|
next = drbr_dequeue(ifp, vpath->br);
|
|
}
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
void
|
|
vxge_mq_qflush(ifnet_t ifp)
|
|
{
|
|
int i;
|
|
mbuf_t m_head;
|
|
vxge_vpath_t *vpath;
|
|
|
|
vxge_dev_t *vdev = (vxge_dev_t *) ifp->if_softc;
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath = &(vdev->vpaths[i]);
|
|
if (!vpath->handle)
|
|
continue;
|
|
|
|
VXGE_TX_LOCK(vpath);
|
|
while ((m_head = buf_ring_dequeue_sc(vpath->br)) != NULL)
|
|
vxge_free_packet(m_head);
|
|
|
|
VXGE_TX_UNLOCK(vpath);
|
|
}
|
|
if_qflush(ifp);
|
|
}
|
|
#endif
|
|
|
|
static inline int
|
|
vxge_xmit(ifnet_t ifp, vxge_vpath_t *vpath, mbuf_t *m_headp)
|
|
{
|
|
int err, num_segs = 0;
|
|
u32 txdl_avail, dma_index, tagged = 0;
|
|
|
|
dma_addr_t dma_addr;
|
|
bus_size_t dma_sizes;
|
|
|
|
void *dtr_priv;
|
|
vxge_txdl_priv_t *txdl_priv;
|
|
vxge_hal_txdl_h txdlh;
|
|
vxge_hal_status_e status;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
VXGE_DRV_STATS(vpath, tx_xmit);
|
|
|
|
txdl_avail = vxge_hal_fifo_free_txdl_count_get(vpath->handle);
|
|
if (txdl_avail < VXGE_TX_LOW_THRESHOLD) {
|
|
|
|
VXGE_DRV_STATS(vpath, tx_low_dtr_cnt);
|
|
err = ENOBUFS;
|
|
goto _exit0;
|
|
}
|
|
|
|
/* Reserve descriptors */
|
|
status = vxge_hal_fifo_txdl_reserve(vpath->handle, &txdlh, &dtr_priv);
|
|
if (status != VXGE_HAL_OK) {
|
|
VXGE_DRV_STATS(vpath, tx_reserve_failed);
|
|
err = ENOBUFS;
|
|
goto _exit0;
|
|
}
|
|
|
|
/* Update Tx private structure for this descriptor */
|
|
txdl_priv = (vxge_txdl_priv_t *) dtr_priv;
|
|
|
|
/*
|
|
* Map the packet for DMA.
|
|
* Returns number of segments through num_segs.
|
|
*/
|
|
err = vxge_dma_mbuf_coalesce(vpath->dma_tag_tx, txdl_priv->dma_map,
|
|
m_headp, txdl_priv->dma_buffers, &num_segs);
|
|
|
|
if (vpath->driver_stats.tx_max_frags < num_segs)
|
|
vpath->driver_stats.tx_max_frags = num_segs;
|
|
|
|
if (err == ENOMEM) {
|
|
VXGE_DRV_STATS(vpath, tx_no_dma_setup);
|
|
vxge_hal_fifo_txdl_free(vpath->handle, txdlh);
|
|
goto _exit0;
|
|
} else if (err != 0) {
|
|
vxge_free_packet(*m_headp);
|
|
VXGE_DRV_STATS(vpath, tx_no_dma_setup);
|
|
vxge_hal_fifo_txdl_free(vpath->handle, txdlh);
|
|
goto _exit0;
|
|
}
|
|
|
|
txdl_priv->mbuf_pkt = *m_headp;
|
|
|
|
/* Set VLAN tag in descriptor only if this packet has it */
|
|
if ((*m_headp)->m_flags & M_VLANTAG)
|
|
vxge_hal_fifo_txdl_vlan_set(txdlh,
|
|
(*m_headp)->m_pkthdr.ether_vtag);
|
|
|
|
/* Set descriptor buffer for header and each fragment/segment */
|
|
for (dma_index = 0; dma_index < num_segs; dma_index++) {
|
|
|
|
dma_sizes = txdl_priv->dma_buffers[dma_index].ds_len;
|
|
dma_addr = htole64(txdl_priv->dma_buffers[dma_index].ds_addr);
|
|
|
|
vxge_hal_fifo_txdl_buffer_set(vpath->handle, txdlh, dma_index,
|
|
dma_addr, dma_sizes);
|
|
}
|
|
|
|
/* Pre-write Sync of mapping */
|
|
bus_dmamap_sync(vpath->dma_tag_tx, txdl_priv->dma_map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
if ((*m_headp)->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
if ((*m_headp)->m_pkthdr.tso_segsz) {
|
|
VXGE_DRV_STATS(vpath, tx_tso);
|
|
vxge_hal_fifo_txdl_lso_set(txdlh,
|
|
VXGE_HAL_FIFO_LSO_FRM_ENCAP_AUTO,
|
|
(*m_headp)->m_pkthdr.tso_segsz);
|
|
}
|
|
}
|
|
|
|
/* Checksum */
|
|
if (ifp->if_hwassist > 0) {
|
|
vxge_hal_fifo_txdl_cksum_set_bits(txdlh,
|
|
VXGE_HAL_FIFO_TXD_TX_CKO_IPV4_EN |
|
|
VXGE_HAL_FIFO_TXD_TX_CKO_TCP_EN |
|
|
VXGE_HAL_FIFO_TXD_TX_CKO_UDP_EN);
|
|
}
|
|
|
|
if ((vxge_hal_device_check_id(vdev->devh) == VXGE_HAL_CARD_TITAN_1A) &&
|
|
(vdev->hw_fw_version >= VXGE_FW_VERSION(1, 8, 0)))
|
|
tagged = 1;
|
|
|
|
vxge_hal_fifo_txdl_post(vpath->handle, txdlh, tagged);
|
|
VXGE_DRV_STATS(vpath, tx_posted);
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_tx_replenish
|
|
* Allocate buffers and set them into descriptors for later use
|
|
*/
|
|
/* ARGSUSED */
|
|
vxge_hal_status_e
|
|
vxge_tx_replenish(vxge_hal_vpath_h vpath_handle, vxge_hal_txdl_h txdlh,
|
|
void *dtr_priv, u32 dtr_index, void *userdata, vxge_hal_reopen_e reopen)
|
|
{
|
|
int err = 0;
|
|
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) userdata;
|
|
vxge_txdl_priv_t *txdl_priv = (vxge_txdl_priv_t *) dtr_priv;
|
|
|
|
err = bus_dmamap_create(vpath->dma_tag_tx, BUS_DMA_NOWAIT,
|
|
&txdl_priv->dma_map);
|
|
|
|
return ((err == 0) ? VXGE_HAL_OK : VXGE_HAL_FAIL);
|
|
}
|
|
|
|
/*
|
|
* vxge_tx_compl
|
|
* If the interrupt is due to Tx completion, free the sent buffer
|
|
*/
|
|
vxge_hal_status_e
|
|
vxge_tx_compl(vxge_hal_vpath_h vpath_handle, vxge_hal_txdl_h txdlh,
|
|
void *dtr_priv, vxge_hal_fifo_tcode_e t_code, void *userdata)
|
|
{
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
vxge_txdl_priv_t *txdl_priv;
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) userdata;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
VXGE_TX_LOCK(vpath);
|
|
|
|
/*
|
|
* For each completed descriptor
|
|
* Get private structure, free buffer, do unmapping, and free descriptor
|
|
*/
|
|
|
|
do {
|
|
VXGE_DRV_STATS(vpath, tx_compl);
|
|
if (t_code != VXGE_HAL_FIFO_T_CODE_OK) {
|
|
device_printf(vdev->ndev, "tx transfer code %d\n",
|
|
t_code);
|
|
|
|
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
|
|
VXGE_DRV_STATS(vpath, tx_tcode);
|
|
vxge_hal_fifo_handle_tcode(vpath_handle, txdlh, t_code);
|
|
}
|
|
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
|
|
txdl_priv = (vxge_txdl_priv_t *) dtr_priv;
|
|
|
|
bus_dmamap_unload(vpath->dma_tag_tx, txdl_priv->dma_map);
|
|
|
|
vxge_free_packet(txdl_priv->mbuf_pkt);
|
|
vxge_hal_fifo_txdl_free(vpath->handle, txdlh);
|
|
|
|
} while (vxge_hal_fifo_txdl_next_completed(vpath_handle, &txdlh,
|
|
&dtr_priv, &t_code) == VXGE_HAL_OK);
|
|
|
|
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
VXGE_TX_UNLOCK(vpath);
|
|
|
|
return (status);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
void
|
|
vxge_tx_term(vxge_hal_vpath_h vpath_handle, vxge_hal_txdl_h txdlh,
|
|
void *dtr_priv, vxge_hal_txdl_state_e state,
|
|
void *userdata, vxge_hal_reopen_e reopen)
|
|
{
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) userdata;
|
|
vxge_txdl_priv_t *txdl_priv = (vxge_txdl_priv_t *) dtr_priv;
|
|
|
|
if (state != VXGE_HAL_TXDL_STATE_POSTED)
|
|
return;
|
|
|
|
if (txdl_priv != NULL) {
|
|
bus_dmamap_sync(vpath->dma_tag_tx, txdl_priv->dma_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
|
|
bus_dmamap_unload(vpath->dma_tag_tx, txdl_priv->dma_map);
|
|
bus_dmamap_destroy(vpath->dma_tag_tx, txdl_priv->dma_map);
|
|
vxge_free_packet(txdl_priv->mbuf_pkt);
|
|
}
|
|
|
|
/* Free the descriptor */
|
|
vxge_hal_fifo_txdl_free(vpath->handle, txdlh);
|
|
}
|
|
|
|
/*
|
|
* vxge_rx_replenish
|
|
* Allocate buffers and set them into descriptors for later use
|
|
*/
|
|
/* ARGSUSED */
|
|
vxge_hal_status_e
|
|
vxge_rx_replenish(vxge_hal_vpath_h vpath_handle, vxge_hal_rxd_h rxdh,
|
|
void *dtr_priv, u32 dtr_index, void *userdata, vxge_hal_reopen_e reopen)
|
|
{
|
|
int err = 0;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) userdata;
|
|
vxge_rxd_priv_t *rxd_priv = (vxge_rxd_priv_t *) dtr_priv;
|
|
|
|
/* Create DMA map for these descriptors */
|
|
err = bus_dmamap_create(vpath->dma_tag_rx, BUS_DMA_NOWAIT,
|
|
&rxd_priv->dma_map);
|
|
if (err == 0) {
|
|
if (vxge_rx_rxd_1b_set(vpath, rxdh, dtr_priv)) {
|
|
bus_dmamap_destroy(vpath->dma_tag_rx,
|
|
rxd_priv->dma_map);
|
|
status = VXGE_HAL_FAIL;
|
|
}
|
|
}
|
|
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* vxge_rx_compl
|
|
*/
|
|
vxge_hal_status_e
|
|
vxge_rx_compl(vxge_hal_vpath_h vpath_handle, vxge_hal_rxd_h rxdh,
|
|
void *dtr_priv, u8 t_code, void *userdata)
|
|
{
|
|
mbuf_t mbuf_up;
|
|
|
|
vxge_rxd_priv_t *rxd_priv;
|
|
vxge_hal_ring_rxd_info_t ext_info;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) userdata;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
struct lro_entry *queued = NULL;
|
|
struct lro_ctrl *lro = &vpath->lro;
|
|
|
|
/* get the interface pointer */
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
do {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
|
|
vxge_hal_ring_rxd_post(vpath_handle, rxdh);
|
|
status = VXGE_HAL_FAIL;
|
|
break;
|
|
}
|
|
|
|
VXGE_DRV_STATS(vpath, rx_compl);
|
|
rxd_priv = (vxge_rxd_priv_t *) dtr_priv;
|
|
|
|
/* Gets details of mbuf i.e., packet length */
|
|
vxge_rx_rxd_1b_get(vpath, rxdh, dtr_priv);
|
|
|
|
/*
|
|
* Prepare one buffer to send it to upper layer Since upper
|
|
* layer frees the buffer do not use rxd_priv->mbuf_pkt.
|
|
* Meanwhile prepare a new buffer, do mapping, use with the
|
|
* current descriptor and post descriptor back to ring vpath
|
|
*/
|
|
mbuf_up = rxd_priv->mbuf_pkt;
|
|
if (t_code != VXGE_HAL_RING_RXD_T_CODE_OK) {
|
|
|
|
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
|
|
VXGE_DRV_STATS(vpath, rx_tcode);
|
|
status = vxge_hal_ring_handle_tcode(vpath_handle,
|
|
rxdh, t_code);
|
|
|
|
/*
|
|
* If transfer code is not for unknown protocols and
|
|
* vxge_hal_device_handle_tcode is NOT returned
|
|
* VXGE_HAL_OK
|
|
* drop this packet and increment rx_tcode stats
|
|
*/
|
|
if ((status != VXGE_HAL_OK) &&
|
|
(t_code != VXGE_HAL_RING_T_CODE_L3_PKT_ERR)) {
|
|
|
|
vxge_free_packet(mbuf_up);
|
|
vxge_hal_ring_rxd_post(vpath_handle, rxdh);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (vxge_rx_rxd_1b_set(vpath, rxdh, dtr_priv)) {
|
|
/*
|
|
* If unable to allocate buffer, post descriptor back
|
|
* to vpath for future processing of same packet.
|
|
*/
|
|
vxge_hal_ring_rxd_post(vpath_handle, rxdh);
|
|
continue;
|
|
}
|
|
|
|
/* Get the extended information */
|
|
vxge_hal_ring_rxd_1b_info_get(vpath_handle, rxdh, &ext_info);
|
|
|
|
/* post descriptor with newly allocated mbuf back to vpath */
|
|
vxge_hal_ring_rxd_post(vpath_handle, rxdh);
|
|
vpath->rxd_posted++;
|
|
|
|
if (vpath->rxd_posted % VXGE_RXD_REPLENISH_COUNT == 0)
|
|
vxge_hal_ring_rxd_post_post_db(vpath_handle);
|
|
|
|
/*
|
|
* Set successfully computed checksums in the mbuf.
|
|
* Leave the rest to the stack to be reverified.
|
|
*/
|
|
vxge_rx_checksum(ext_info, mbuf_up);
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
M_HASHTYPE_SET(mbuf_up, M_HASHTYPE_OPAQUE);
|
|
mbuf_up->m_pkthdr.flowid = vpath->vp_index;
|
|
#endif
|
|
/* Post-Read sync for buffers */
|
|
bus_dmamap_sync(vpath->dma_tag_rx, rxd_priv->dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
vxge_rx_input(ifp, mbuf_up, vpath);
|
|
|
|
} while (vxge_hal_ring_rxd_next_completed(vpath_handle, &rxdh,
|
|
&dtr_priv, &t_code) == VXGE_HAL_OK);
|
|
|
|
/* Flush any outstanding LRO work */
|
|
if (vpath->lro_enable && vpath->lro.lro_cnt) {
|
|
while ((queued = SLIST_FIRST(&lro->lro_active)) != NULL) {
|
|
SLIST_REMOVE_HEAD(&lro->lro_active, next);
|
|
tcp_lro_flush(lro, queued);
|
|
}
|
|
}
|
|
|
|
return (status);
|
|
}
|
|
|
|
static inline void
|
|
vxge_rx_input(ifnet_t ifp, mbuf_t mbuf_up, vxge_vpath_t *vpath)
|
|
{
|
|
if (vpath->lro_enable && vpath->lro.lro_cnt) {
|
|
if (tcp_lro_rx(&vpath->lro, mbuf_up, 0) == 0)
|
|
return;
|
|
}
|
|
(*ifp->if_input) (ifp, mbuf_up);
|
|
}
|
|
|
|
static inline void
|
|
vxge_rx_checksum(vxge_hal_ring_rxd_info_t ext_info, mbuf_t mbuf_up)
|
|
{
|
|
|
|
if (!(ext_info.proto & VXGE_HAL_FRAME_PROTO_IP_FRAG) &&
|
|
(ext_info.proto & VXGE_HAL_FRAME_PROTO_TCP_OR_UDP) &&
|
|
ext_info.l3_cksum_valid && ext_info.l4_cksum_valid) {
|
|
|
|
mbuf_up->m_pkthdr.csum_data = htons(0xffff);
|
|
|
|
mbuf_up->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
|
|
mbuf_up->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
mbuf_up->m_pkthdr.csum_flags |=
|
|
(CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
|
|
|
|
} else {
|
|
|
|
if (ext_info.vlan) {
|
|
mbuf_up->m_pkthdr.ether_vtag = ext_info.vlan;
|
|
mbuf_up->m_flags |= M_VLANTAG;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_rx_term During unload terminate and free all descriptors
|
|
* @vpath_handle Rx vpath Handle @rxdh Rx Descriptor Handle @state Descriptor
|
|
* State @userdata Per-adapter Data @reopen vpath open/reopen option
|
|
*/
|
|
/* ARGSUSED */
|
|
void
|
|
vxge_rx_term(vxge_hal_vpath_h vpath_handle, vxge_hal_rxd_h rxdh,
|
|
void *dtr_priv, vxge_hal_rxd_state_e state, void *userdata,
|
|
vxge_hal_reopen_e reopen)
|
|
{
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) userdata;
|
|
vxge_rxd_priv_t *rxd_priv = (vxge_rxd_priv_t *) dtr_priv;
|
|
|
|
if (state != VXGE_HAL_RXD_STATE_POSTED)
|
|
return;
|
|
|
|
if (rxd_priv != NULL) {
|
|
bus_dmamap_sync(vpath->dma_tag_rx, rxd_priv->dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(vpath->dma_tag_rx, rxd_priv->dma_map);
|
|
bus_dmamap_destroy(vpath->dma_tag_rx, rxd_priv->dma_map);
|
|
|
|
vxge_free_packet(rxd_priv->mbuf_pkt);
|
|
}
|
|
/* Free the descriptor */
|
|
vxge_hal_ring_rxd_free(vpath_handle, rxdh);
|
|
}
|
|
|
|
/*
|
|
* vxge_rx_rxd_1b_get
|
|
* Get descriptors of packet to send up
|
|
*/
|
|
void
|
|
vxge_rx_rxd_1b_get(vxge_vpath_t *vpath, vxge_hal_rxd_h rxdh, void *dtr_priv)
|
|
{
|
|
vxge_rxd_priv_t *rxd_priv = (vxge_rxd_priv_t *) dtr_priv;
|
|
mbuf_t mbuf_up = rxd_priv->mbuf_pkt;
|
|
|
|
/* Retrieve data from completed descriptor */
|
|
vxge_hal_ring_rxd_1b_get(vpath->handle, rxdh, &rxd_priv->dma_addr[0],
|
|
(u32 *) &rxd_priv->dma_sizes[0]);
|
|
|
|
/* Update newly created buffer to be sent up with packet length */
|
|
mbuf_up->m_len = rxd_priv->dma_sizes[0];
|
|
mbuf_up->m_pkthdr.len = rxd_priv->dma_sizes[0];
|
|
mbuf_up->m_next = NULL;
|
|
}
|
|
|
|
/*
|
|
* vxge_rx_rxd_1b_set
|
|
* Allocates new mbufs to be placed into descriptors
|
|
*/
|
|
int
|
|
vxge_rx_rxd_1b_set(vxge_vpath_t *vpath, vxge_hal_rxd_h rxdh, void *dtr_priv)
|
|
{
|
|
int num_segs, err = 0;
|
|
|
|
mbuf_t mbuf_pkt;
|
|
bus_dmamap_t dma_map;
|
|
bus_dma_segment_t dma_buffers[1];
|
|
vxge_rxd_priv_t *rxd_priv = (vxge_rxd_priv_t *) dtr_priv;
|
|
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
mbuf_pkt = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, vdev->rx_mbuf_sz);
|
|
if (!mbuf_pkt) {
|
|
err = ENOBUFS;
|
|
VXGE_DRV_STATS(vpath, rx_no_buf);
|
|
device_printf(vdev->ndev, "out of memory to allocate mbuf\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
/* Update mbuf's length, packet length and receive interface */
|
|
mbuf_pkt->m_len = vdev->rx_mbuf_sz;
|
|
mbuf_pkt->m_pkthdr.len = vdev->rx_mbuf_sz;
|
|
mbuf_pkt->m_pkthdr.rcvif = vdev->ifp;
|
|
|
|
/* Load DMA map */
|
|
err = vxge_dma_mbuf_coalesce(vpath->dma_tag_rx, vpath->extra_dma_map,
|
|
&mbuf_pkt, dma_buffers, &num_segs);
|
|
if (err != 0) {
|
|
VXGE_DRV_STATS(vpath, rx_map_fail);
|
|
vxge_free_packet(mbuf_pkt);
|
|
goto _exit0;
|
|
}
|
|
|
|
/* Unload DMA map of mbuf in current descriptor */
|
|
bus_dmamap_sync(vpath->dma_tag_rx, rxd_priv->dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(vpath->dma_tag_rx, rxd_priv->dma_map);
|
|
|
|
/* Update descriptor private data */
|
|
dma_map = rxd_priv->dma_map;
|
|
rxd_priv->mbuf_pkt = mbuf_pkt;
|
|
rxd_priv->dma_addr[0] = htole64(dma_buffers->ds_addr);
|
|
rxd_priv->dma_map = vpath->extra_dma_map;
|
|
vpath->extra_dma_map = dma_map;
|
|
|
|
/* Pre-Read/Write sync */
|
|
bus_dmamap_sync(vpath->dma_tag_rx, rxd_priv->dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Set descriptor buffer */
|
|
vxge_hal_ring_rxd_1b_set(rxdh, rxd_priv->dma_addr[0], vdev->rx_mbuf_sz);
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_link_up
|
|
* Callback for Link-up indication from HAL
|
|
*/
|
|
/* ARGSUSED */
|
|
void
|
|
vxge_link_up(vxge_hal_device_h devh, void *userdata)
|
|
{
|
|
int i;
|
|
vxge_vpath_t *vpath;
|
|
vxge_hal_device_hw_info_t *hw_info;
|
|
|
|
vxge_dev_t *vdev = (vxge_dev_t *) userdata;
|
|
hw_info = &vdev->config.hw_info;
|
|
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
if (vdev->config.intr_mode == VXGE_HAL_INTR_MODE_MSIX) {
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath = &(vdev->vpaths[i]);
|
|
vxge_hal_vpath_tti_ci_set(vpath->handle);
|
|
vxge_hal_vpath_rti_ci_set(vpath->handle);
|
|
}
|
|
}
|
|
|
|
if (vdev->is_privilaged && (hw_info->ports > 1)) {
|
|
vxge_active_port_update(vdev);
|
|
device_printf(vdev->ndev,
|
|
"Active Port : %lld\n", vdev->active_port);
|
|
}
|
|
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
}
|
|
|
|
/*
|
|
* vxge_link_down
|
|
* Callback for Link-down indication from HAL
|
|
*/
|
|
/* ARGSUSED */
|
|
void
|
|
vxge_link_down(vxge_hal_device_h devh, void *userdata)
|
|
{
|
|
int i;
|
|
vxge_vpath_t *vpath;
|
|
vxge_dev_t *vdev = (vxge_dev_t *) userdata;
|
|
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
if (vdev->config.intr_mode == VXGE_HAL_INTR_MODE_MSIX) {
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath = &(vdev->vpaths[i]);
|
|
vxge_hal_vpath_tti_ci_reset(vpath->handle);
|
|
vxge_hal_vpath_rti_ci_reset(vpath->handle);
|
|
}
|
|
}
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
}
|
|
|
|
/*
|
|
* vxge_reset
|
|
*/
|
|
void
|
|
vxge_reset(vxge_dev_t *vdev)
|
|
{
|
|
if (!vdev->is_initialized)
|
|
return;
|
|
|
|
VXGE_DRV_LOCK(vdev);
|
|
vxge_stop_locked(vdev);
|
|
vxge_init_locked(vdev);
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
}
|
|
|
|
/*
|
|
* vxge_crit_error
|
|
* Callback for Critical error indication from HAL
|
|
*/
|
|
/* ARGSUSED */
|
|
void
|
|
vxge_crit_error(vxge_hal_device_h devh, void *userdata,
|
|
vxge_hal_event_e type, u64 serr_data)
|
|
{
|
|
vxge_dev_t *vdev = (vxge_dev_t *) userdata;
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
switch (type) {
|
|
case VXGE_HAL_EVENT_SERR:
|
|
case VXGE_HAL_EVENT_KDFCCTL:
|
|
case VXGE_HAL_EVENT_CRITICAL:
|
|
vxge_hal_device_intr_disable(vdev->devh);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_ifp_setup
|
|
*/
|
|
int
|
|
vxge_ifp_setup(device_t ndev)
|
|
{
|
|
ifnet_t ifp;
|
|
int i, j, err = 0;
|
|
|
|
vxge_dev_t *vdev = (vxge_dev_t *) device_get_softc(ndev);
|
|
|
|
for (i = 0, j = 0; i < VXGE_HAL_MAX_VIRTUAL_PATHS; i++) {
|
|
if (!bVAL1(vdev->config.hw_info.vpath_mask, i))
|
|
continue;
|
|
|
|
if (j >= vdev->no_of_vpath)
|
|
break;
|
|
|
|
vdev->vpaths[j].vp_id = i;
|
|
vdev->vpaths[j].vp_index = j;
|
|
vdev->vpaths[j].vdev = vdev;
|
|
vdev->vpaths[j].is_configured = TRUE;
|
|
|
|
vxge_os_memcpy((u8 *) vdev->vpaths[j].mac_addr,
|
|
(u8 *) (vdev->config.hw_info.mac_addrs[i]),
|
|
(size_t) ETHER_ADDR_LEN);
|
|
j++;
|
|
}
|
|
|
|
/* Get interface ifnet structure for this Ether device */
|
|
ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(vdev->ndev,
|
|
"memory allocation for ifnet failed\n");
|
|
err = ENXIO;
|
|
goto _exit0;
|
|
}
|
|
vdev->ifp = ifp;
|
|
|
|
/* Initialize interface ifnet structure */
|
|
if_initname(ifp, device_get_name(ndev), device_get_unit(ndev));
|
|
|
|
ifp->if_baudrate = VXGE_BAUDRATE;
|
|
ifp->if_init = vxge_init;
|
|
ifp->if_softc = vdev;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = vxge_ioctl;
|
|
ifp->if_start = vxge_send;
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
ifp->if_transmit = vxge_mq_send;
|
|
ifp->if_qflush = vxge_mq_qflush;
|
|
#endif
|
|
ifp->if_snd.ifq_drv_maxlen = max(vdev->config.ifq_maxlen, ifqmaxlen);
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
|
|
/* IFQ_SET_READY(&ifp->if_snd); */
|
|
|
|
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_VLAN_HWCSUM;
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
|
|
ifp->if_capabilities |= IFCAP_JUMBO_MTU;
|
|
|
|
if (vdev->config.tso_enable)
|
|
vxge_tso_config(vdev);
|
|
|
|
if (vdev->config.lro_enable)
|
|
ifp->if_capabilities |= IFCAP_LRO;
|
|
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
strlcpy(vdev->ndev_name, device_get_nameunit(ndev),
|
|
sizeof(vdev->ndev_name));
|
|
|
|
/* Attach the interface */
|
|
ether_ifattach(ifp, vdev->vpaths[0].mac_addr);
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_isr_setup
|
|
* Register isr functions
|
|
*/
|
|
int
|
|
vxge_isr_setup(vxge_dev_t *vdev)
|
|
{
|
|
int i, irq_rid, err = 0;
|
|
vxge_vpath_t *vpath;
|
|
|
|
void *isr_func_arg;
|
|
void (*isr_func_ptr) (void *);
|
|
|
|
switch (vdev->config.intr_mode) {
|
|
case VXGE_HAL_INTR_MODE_IRQLINE:
|
|
err = bus_setup_intr(vdev->ndev,
|
|
vdev->config.isr_info[0].irq_res,
|
|
(INTR_TYPE_NET | INTR_MPSAFE),
|
|
vxge_isr_filter, vxge_isr_line, vdev,
|
|
&vdev->config.isr_info[0].irq_handle);
|
|
break;
|
|
|
|
case VXGE_HAL_INTR_MODE_MSIX:
|
|
for (i = 0; i < vdev->intr_count; i++) {
|
|
|
|
irq_rid = vdev->config.isr_info[i].irq_rid;
|
|
vpath = &vdev->vpaths[irq_rid / 4];
|
|
|
|
if ((irq_rid % 4) == 2) {
|
|
isr_func_ptr = vxge_isr_msix;
|
|
isr_func_arg = (void *) vpath;
|
|
} else if ((irq_rid % 4) == 3) {
|
|
isr_func_ptr = vxge_isr_msix_alarm;
|
|
isr_func_arg = (void *) vpath;
|
|
} else
|
|
break;
|
|
|
|
err = bus_setup_intr(vdev->ndev,
|
|
vdev->config.isr_info[i].irq_res,
|
|
(INTR_TYPE_NET | INTR_MPSAFE), NULL,
|
|
(void *) isr_func_ptr, (void *) isr_func_arg,
|
|
&vdev->config.isr_info[i].irq_handle);
|
|
if (err != 0)
|
|
break;
|
|
}
|
|
|
|
if (err != 0) {
|
|
/* Teardown interrupt handler */
|
|
while (--i > 0)
|
|
bus_teardown_intr(vdev->ndev,
|
|
vdev->config.isr_info[i].irq_res,
|
|
vdev->config.isr_info[i].irq_handle);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_isr_filter
|
|
* ISR filter function - filter interrupts from other shared devices
|
|
*/
|
|
int
|
|
vxge_isr_filter(void *handle)
|
|
{
|
|
u64 val64 = 0;
|
|
vxge_dev_t *vdev = (vxge_dev_t *) handle;
|
|
__hal_device_t *hldev = (__hal_device_t *) vdev->devh;
|
|
|
|
vxge_hal_common_reg_t *common_reg =
|
|
(vxge_hal_common_reg_t *) (hldev->common_reg);
|
|
|
|
val64 = vxge_os_pio_mem_read64(vdev->pdev, (vdev->devh)->regh0,
|
|
&common_reg->titan_general_int_status);
|
|
|
|
return ((val64) ? FILTER_SCHEDULE_THREAD : FILTER_STRAY);
|
|
}
|
|
|
|
/*
|
|
* vxge_isr_line
|
|
* Interrupt service routine for Line interrupts
|
|
*/
|
|
void
|
|
vxge_isr_line(void *vdev_ptr)
|
|
{
|
|
vxge_dev_t *vdev = (vxge_dev_t *) vdev_ptr;
|
|
|
|
vxge_hal_device_handle_irq(vdev->devh, 0);
|
|
}
|
|
|
|
void
|
|
vxge_isr_msix(void *vpath_ptr)
|
|
{
|
|
u32 got_rx = 0;
|
|
u32 got_tx = 0;
|
|
|
|
__hal_virtualpath_t *hal_vpath;
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) vpath_ptr;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
hal_vpath = ((__hal_vpath_handle_t *) vpath->handle)->vpath;
|
|
|
|
VXGE_DRV_STATS(vpath, isr_msix);
|
|
VXGE_HAL_DEVICE_STATS_SW_INFO_TRAFFIC_INTR(vdev->devh);
|
|
|
|
vxge_hal_vpath_mf_msix_mask(vpath->handle, vpath->msix_vec);
|
|
|
|
/* processing rx */
|
|
vxge_hal_vpath_poll_rx(vpath->handle, &got_rx);
|
|
|
|
/* processing tx */
|
|
if (hal_vpath->vp_config->fifo.enable) {
|
|
vxge_intr_coalesce_tx(vpath);
|
|
vxge_hal_vpath_poll_tx(vpath->handle, &got_tx);
|
|
}
|
|
|
|
vxge_hal_vpath_mf_msix_unmask(vpath->handle, vpath->msix_vec);
|
|
}
|
|
|
|
void
|
|
vxge_isr_msix_alarm(void *vpath_ptr)
|
|
{
|
|
int i;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
vxge_vpath_t *vpath = (vxge_vpath_t *) vpath_ptr;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
|
|
VXGE_HAL_DEVICE_STATS_SW_INFO_NOT_TRAFFIC_INTR(vdev->devh);
|
|
|
|
/* Process alarms in each vpath */
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
|
|
vpath = &(vdev->vpaths[i]);
|
|
vxge_hal_vpath_mf_msix_mask(vpath->handle,
|
|
vpath->msix_vec_alarm);
|
|
status = vxge_hal_vpath_alarm_process(vpath->handle, 0);
|
|
if ((status == VXGE_HAL_ERR_EVENT_SLOT_FREEZE) ||
|
|
(status == VXGE_HAL_ERR_EVENT_SERR)) {
|
|
device_printf(vdev->ndev,
|
|
"processing alarms urecoverable error %x\n",
|
|
status);
|
|
|
|
/* Stop the driver */
|
|
vdev->is_initialized = FALSE;
|
|
break;
|
|
}
|
|
vxge_hal_vpath_mf_msix_unmask(vpath->handle,
|
|
vpath->msix_vec_alarm);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_msix_enable
|
|
*/
|
|
vxge_hal_status_e
|
|
vxge_msix_enable(vxge_dev_t *vdev)
|
|
{
|
|
int i, first_vp_id, msix_id;
|
|
|
|
vxge_vpath_t *vpath;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
/*
|
|
* Unmasking and Setting MSIX vectors before enabling interrupts
|
|
* tim[] : 0 - Tx ## 1 - Rx ## 2 - UMQ-DMQ ## 0 - BITMAP
|
|
*/
|
|
int tim[4] = {0, 1, 0, 0};
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
|
|
vpath = vdev->vpaths + i;
|
|
first_vp_id = vdev->vpaths[0].vp_id;
|
|
|
|
msix_id = vpath->vp_id * VXGE_HAL_VPATH_MSIX_ACTIVE;
|
|
tim[1] = vpath->msix_vec = msix_id + 1;
|
|
|
|
vpath->msix_vec_alarm = first_vp_id *
|
|
VXGE_HAL_VPATH_MSIX_ACTIVE + VXGE_HAL_VPATH_MSIX_ALARM_ID;
|
|
|
|
status = vxge_hal_vpath_mf_msix_set(vpath->handle,
|
|
tim, VXGE_HAL_VPATH_MSIX_ALARM_ID);
|
|
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev,
|
|
"failed to set msix vectors to vpath\n");
|
|
break;
|
|
}
|
|
|
|
vxge_hal_vpath_mf_msix_unmask(vpath->handle, vpath->msix_vec);
|
|
vxge_hal_vpath_mf_msix_unmask(vpath->handle,
|
|
vpath->msix_vec_alarm);
|
|
}
|
|
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* vxge_media_init
|
|
* Initializes, adds and sets media
|
|
*/
|
|
void
|
|
vxge_media_init(vxge_dev_t *vdev)
|
|
{
|
|
ifmedia_init(&vdev->media,
|
|
IFM_IMASK, vxge_media_change, vxge_media_status);
|
|
|
|
/* Add supported media */
|
|
ifmedia_add(&vdev->media,
|
|
IFM_ETHER | vdev->ifm_optics | IFM_FDX,
|
|
0, NULL);
|
|
|
|
/* Set media */
|
|
ifmedia_add(&vdev->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&vdev->media, IFM_ETHER | IFM_AUTO);
|
|
}
|
|
|
|
/*
|
|
* vxge_media_status
|
|
* Callback for interface media settings
|
|
*/
|
|
void
|
|
vxge_media_status(ifnet_t ifp, struct ifmediareq *ifmr)
|
|
{
|
|
vxge_dev_t *vdev = (vxge_dev_t *) ifp->if_softc;
|
|
vxge_hal_device_t *hldev = vdev->devh;
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
/* set link state */
|
|
if (vxge_hal_device_link_state_get(hldev) == VXGE_HAL_LINK_UP) {
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
ifmr->ifm_active |= vdev->ifm_optics | IFM_FDX;
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_media_change
|
|
* Media change driver callback
|
|
*/
|
|
int
|
|
vxge_media_change(ifnet_t ifp)
|
|
{
|
|
vxge_dev_t *vdev = (vxge_dev_t *) ifp->if_softc;
|
|
struct ifmedia *ifmediap = &vdev->media;
|
|
|
|
return (IFM_TYPE(ifmediap->ifm_media) != IFM_ETHER ? EINVAL : 0);
|
|
}
|
|
|
|
/*
|
|
* Allocate PCI resources
|
|
*/
|
|
int
|
|
vxge_alloc_resources(vxge_dev_t *vdev)
|
|
{
|
|
int err = 0;
|
|
vxge_pci_info_t *pci_info = NULL;
|
|
vxge_free_resources_e error_level = VXGE_FREE_NONE;
|
|
|
|
device_t ndev = vdev->ndev;
|
|
|
|
/* Allocate Buffer for HAL Device Configuration */
|
|
vdev->device_config = (vxge_hal_device_config_t *)
|
|
vxge_mem_alloc(sizeof(vxge_hal_device_config_t));
|
|
|
|
if (!vdev->device_config) {
|
|
err = ENOMEM;
|
|
error_level = VXGE_DISABLE_PCI_BUSMASTER;
|
|
device_printf(vdev->ndev,
|
|
"failed to allocate memory for device config\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
|
|
pci_info = (vxge_pci_info_t *) vxge_mem_alloc(sizeof(vxge_pci_info_t));
|
|
if (!pci_info) {
|
|
error_level = VXGE_FREE_DEVICE_CONFIG;
|
|
err = ENOMEM;
|
|
device_printf(vdev->ndev,
|
|
"failed to allocate memory for pci info\n");
|
|
goto _exit0;
|
|
}
|
|
pci_info->ndev = ndev;
|
|
vdev->pdev = pci_info;
|
|
|
|
err = vxge_alloc_bar_resources(vdev, 0);
|
|
if (err != 0) {
|
|
error_level = VXGE_FREE_BAR0;
|
|
goto _exit0;
|
|
}
|
|
|
|
err = vxge_alloc_bar_resources(vdev, 1);
|
|
if (err != 0) {
|
|
error_level = VXGE_FREE_BAR1;
|
|
goto _exit0;
|
|
}
|
|
|
|
err = vxge_alloc_bar_resources(vdev, 2);
|
|
if (err != 0)
|
|
error_level = VXGE_FREE_BAR2;
|
|
|
|
_exit0:
|
|
if (error_level)
|
|
vxge_free_resources(ndev, error_level);
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_alloc_bar_resources
|
|
* Allocates BAR resources
|
|
*/
|
|
int
|
|
vxge_alloc_bar_resources(vxge_dev_t *vdev, int i)
|
|
{
|
|
int err = 0;
|
|
int res_id = 0;
|
|
vxge_pci_info_t *pci_info = vdev->pdev;
|
|
|
|
res_id = PCIR_BAR((i == 0) ? 0 : (i * 2));
|
|
|
|
pci_info->bar_info[i] =
|
|
bus_alloc_resource_any(vdev->ndev,
|
|
SYS_RES_MEMORY, &res_id, RF_ACTIVE);
|
|
|
|
if (pci_info->bar_info[i] == NULL) {
|
|
device_printf(vdev->ndev,
|
|
"failed to allocate memory for bus resources\n");
|
|
err = ENOMEM;
|
|
goto _exit0;
|
|
}
|
|
|
|
pci_info->reg_map[i] =
|
|
(vxge_bus_res_t *) vxge_mem_alloc(sizeof(vxge_bus_res_t));
|
|
|
|
if (pci_info->reg_map[i] == NULL) {
|
|
device_printf(vdev->ndev,
|
|
"failed to allocate memory bar resources\n");
|
|
err = ENOMEM;
|
|
goto _exit0;
|
|
}
|
|
|
|
((vxge_bus_res_t *) (pci_info->reg_map[i]))->bus_space_tag =
|
|
rman_get_bustag(pci_info->bar_info[i]);
|
|
|
|
((vxge_bus_res_t *) (pci_info->reg_map[i]))->bus_space_handle =
|
|
rman_get_bushandle(pci_info->bar_info[i]);
|
|
|
|
((vxge_bus_res_t *) (pci_info->reg_map[i]))->bar_start_addr =
|
|
pci_info->bar_info[i];
|
|
|
|
((vxge_bus_res_t *) (pci_info->reg_map[i]))->bus_res_len =
|
|
rman_get_size(pci_info->bar_info[i]);
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_alloc_isr_resources
|
|
*/
|
|
int
|
|
vxge_alloc_isr_resources(vxge_dev_t *vdev)
|
|
{
|
|
int i, err = 0, irq_rid;
|
|
int msix_vec_reqd, intr_count, msix_count;
|
|
|
|
int intr_mode = VXGE_HAL_INTR_MODE_IRQLINE;
|
|
|
|
if (vdev->config.intr_mode == VXGE_HAL_INTR_MODE_MSIX) {
|
|
/* MSI-X messages supported by device */
|
|
intr_count = pci_msix_count(vdev->ndev);
|
|
if (intr_count) {
|
|
|
|
msix_vec_reqd = 4 * vdev->no_of_vpath;
|
|
if (intr_count >= msix_vec_reqd) {
|
|
intr_count = msix_vec_reqd;
|
|
|
|
err = pci_alloc_msix(vdev->ndev, &intr_count);
|
|
if (err == 0)
|
|
intr_mode = VXGE_HAL_INTR_MODE_MSIX;
|
|
}
|
|
|
|
if ((err != 0) || (intr_count < msix_vec_reqd)) {
|
|
device_printf(vdev->ndev, "Unable to allocate "
|
|
"msi/x vectors switching to INTA mode\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
err = 0;
|
|
vdev->intr_count = 0;
|
|
vdev->config.intr_mode = intr_mode;
|
|
|
|
switch (vdev->config.intr_mode) {
|
|
case VXGE_HAL_INTR_MODE_IRQLINE:
|
|
vdev->config.isr_info[0].irq_rid = 0;
|
|
vdev->config.isr_info[0].irq_res =
|
|
bus_alloc_resource_any(vdev->ndev, SYS_RES_IRQ,
|
|
&vdev->config.isr_info[0].irq_rid,
|
|
(RF_SHAREABLE | RF_ACTIVE));
|
|
|
|
if (vdev->config.isr_info[0].irq_res == NULL) {
|
|
device_printf(vdev->ndev,
|
|
"failed to allocate line interrupt resource\n");
|
|
err = ENOMEM;
|
|
goto _exit0;
|
|
}
|
|
vdev->intr_count++;
|
|
break;
|
|
|
|
case VXGE_HAL_INTR_MODE_MSIX:
|
|
msix_count = 0;
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
irq_rid = i * 4;
|
|
|
|
vdev->config.isr_info[msix_count].irq_rid = irq_rid + 2;
|
|
vdev->config.isr_info[msix_count].irq_res =
|
|
bus_alloc_resource_any(vdev->ndev, SYS_RES_IRQ,
|
|
&vdev->config.isr_info[msix_count].irq_rid,
|
|
(RF_SHAREABLE | RF_ACTIVE));
|
|
|
|
if (vdev->config.isr_info[msix_count].irq_res == NULL) {
|
|
device_printf(vdev->ndev,
|
|
"allocating bus resource (rid %d) failed\n",
|
|
vdev->config.isr_info[msix_count].irq_rid);
|
|
err = ENOMEM;
|
|
goto _exit0;
|
|
}
|
|
|
|
vdev->intr_count++;
|
|
err = bus_bind_intr(vdev->ndev,
|
|
vdev->config.isr_info[msix_count].irq_res,
|
|
(i % mp_ncpus));
|
|
if (err != 0)
|
|
break;
|
|
|
|
msix_count++;
|
|
}
|
|
|
|
vdev->config.isr_info[msix_count].irq_rid = 3;
|
|
vdev->config.isr_info[msix_count].irq_res =
|
|
bus_alloc_resource_any(vdev->ndev, SYS_RES_IRQ,
|
|
&vdev->config.isr_info[msix_count].irq_rid,
|
|
(RF_SHAREABLE | RF_ACTIVE));
|
|
|
|
if (vdev->config.isr_info[msix_count].irq_res == NULL) {
|
|
device_printf(vdev->ndev,
|
|
"allocating bus resource (rid %d) failed\n",
|
|
vdev->config.isr_info[msix_count].irq_rid);
|
|
err = ENOMEM;
|
|
goto _exit0;
|
|
}
|
|
|
|
vdev->intr_count++;
|
|
err = bus_bind_intr(vdev->ndev,
|
|
vdev->config.isr_info[msix_count].irq_res, (i % mp_ncpus));
|
|
|
|
break;
|
|
}
|
|
|
|
vdev->device_config->intr_mode = vdev->config.intr_mode;
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_free_resources
|
|
* Undo what-all we did during load/attach
|
|
*/
|
|
void
|
|
vxge_free_resources(device_t ndev, vxge_free_resources_e vxge_free_resource)
|
|
{
|
|
int i;
|
|
vxge_dev_t *vdev;
|
|
|
|
vdev = (vxge_dev_t *) device_get_softc(ndev);
|
|
|
|
switch (vxge_free_resource) {
|
|
case VXGE_FREE_ALL:
|
|
for (i = 0; i < vdev->intr_count; i++) {
|
|
bus_teardown_intr(ndev,
|
|
vdev->config.isr_info[i].irq_res,
|
|
vdev->config.isr_info[i].irq_handle);
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_INTERFACE:
|
|
ether_ifdetach(vdev->ifp);
|
|
bus_generic_detach(ndev);
|
|
if_free(vdev->ifp);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_MEDIA:
|
|
ifmedia_removeall(&vdev->media);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_MUTEX:
|
|
vxge_mutex_destroy(vdev);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_VPATH:
|
|
vxge_mem_free(vdev->vpaths,
|
|
vdev->no_of_vpath * sizeof(vxge_vpath_t));
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_TERMINATE_DEVICE:
|
|
if (vdev->devh != NULL) {
|
|
vxge_hal_device_private_set(vdev->devh, 0);
|
|
vxge_hal_device_terminate(vdev->devh);
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_ISR_RESOURCE:
|
|
vxge_free_isr_resources(vdev);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_BAR2:
|
|
vxge_free_bar_resources(vdev, 2);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_BAR1:
|
|
vxge_free_bar_resources(vdev, 1);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_BAR0:
|
|
vxge_free_bar_resources(vdev, 0);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_PCI_INFO:
|
|
vxge_mem_free(vdev->pdev, sizeof(vxge_pci_info_t));
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_DEVICE_CONFIG:
|
|
vxge_mem_free(vdev->device_config,
|
|
sizeof(vxge_hal_device_config_t));
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_DISABLE_PCI_BUSMASTER:
|
|
pci_disable_busmaster(ndev);
|
|
/* FALLTHROUGH */
|
|
|
|
case VXGE_FREE_TERMINATE_DRIVER:
|
|
if (vxge_dev_ref_count) {
|
|
--vxge_dev_ref_count;
|
|
if (0 == vxge_dev_ref_count)
|
|
vxge_hal_driver_terminate();
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
default:
|
|
case VXGE_FREE_NONE:
|
|
break;
|
|
/* NOTREACHED */
|
|
}
|
|
}
|
|
|
|
void
|
|
vxge_free_isr_resources(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
|
|
switch (vdev->config.intr_mode) {
|
|
case VXGE_HAL_INTR_MODE_IRQLINE:
|
|
if (vdev->config.isr_info[0].irq_res) {
|
|
bus_release_resource(vdev->ndev, SYS_RES_IRQ,
|
|
vdev->config.isr_info[0].irq_rid,
|
|
vdev->config.isr_info[0].irq_res);
|
|
|
|
vdev->config.isr_info[0].irq_res = NULL;
|
|
}
|
|
break;
|
|
|
|
case VXGE_HAL_INTR_MODE_MSIX:
|
|
for (i = 0; i < vdev->intr_count; i++) {
|
|
if (vdev->config.isr_info[i].irq_res) {
|
|
bus_release_resource(vdev->ndev, SYS_RES_IRQ,
|
|
vdev->config.isr_info[i].irq_rid,
|
|
vdev->config.isr_info[i].irq_res);
|
|
|
|
vdev->config.isr_info[i].irq_res = NULL;
|
|
}
|
|
}
|
|
|
|
if (vdev->intr_count)
|
|
pci_release_msi(vdev->ndev);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
void
|
|
vxge_free_bar_resources(vxge_dev_t *vdev, int i)
|
|
{
|
|
int res_id = 0;
|
|
vxge_pci_info_t *pci_info = vdev->pdev;
|
|
|
|
res_id = PCIR_BAR((i == 0) ? 0 : (i * 2));
|
|
|
|
if (pci_info->bar_info[i])
|
|
bus_release_resource(vdev->ndev, SYS_RES_MEMORY,
|
|
res_id, pci_info->bar_info[i]);
|
|
|
|
vxge_mem_free(pci_info->reg_map[i], sizeof(vxge_bus_res_t));
|
|
}
|
|
|
|
/*
|
|
* vxge_init_mutex
|
|
* Initializes mutexes used in driver
|
|
*/
|
|
void
|
|
vxge_mutex_init(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
|
|
snprintf(vdev->mtx_drv_name, sizeof(vdev->mtx_drv_name),
|
|
"%s_drv", vdev->ndev_name);
|
|
|
|
mtx_init(&vdev->mtx_drv, vdev->mtx_drv_name,
|
|
MTX_NETWORK_LOCK, MTX_DEF);
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
snprintf(vdev->vpaths[i].mtx_tx_name,
|
|
sizeof(vdev->vpaths[i].mtx_tx_name), "%s_tx_%d",
|
|
vdev->ndev_name, i);
|
|
|
|
mtx_init(&vdev->vpaths[i].mtx_tx,
|
|
vdev->vpaths[i].mtx_tx_name, NULL, MTX_DEF);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_mutex_destroy
|
|
* Destroys mutexes used in driver
|
|
*/
|
|
void
|
|
vxge_mutex_destroy(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++)
|
|
VXGE_TX_LOCK_DESTROY(&(vdev->vpaths[i]));
|
|
|
|
VXGE_DRV_LOCK_DESTROY(vdev);
|
|
}
|
|
|
|
/*
|
|
* vxge_rth_config
|
|
*/
|
|
vxge_hal_status_e
|
|
vxge_rth_config(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
vxge_hal_vpath_h vpath_handle;
|
|
vxge_hal_rth_hash_types_t hash_types;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
u8 mtable[256] = {0};
|
|
|
|
/* Filling matable with bucket-to-vpath mapping */
|
|
vdev->config.rth_bkt_sz = VXGE_DEFAULT_RTH_BUCKET_SIZE;
|
|
|
|
for (i = 0; i < (1 << vdev->config.rth_bkt_sz); i++)
|
|
mtable[i] = i % vdev->no_of_vpath;
|
|
|
|
/* Fill RTH hash types */
|
|
hash_types.hash_type_tcpipv4_en = VXGE_HAL_RING_HASH_TYPE_TCP_IPV4;
|
|
hash_types.hash_type_tcpipv6_en = VXGE_HAL_RING_HASH_TYPE_TCP_IPV6;
|
|
hash_types.hash_type_tcpipv6ex_en = VXGE_HAL_RING_HASH_TYPE_TCP_IPV6_EX;
|
|
hash_types.hash_type_ipv4_en = VXGE_HAL_RING_HASH_TYPE_IPV4;
|
|
hash_types.hash_type_ipv6_en = VXGE_HAL_RING_HASH_TYPE_IPV6;
|
|
hash_types.hash_type_ipv6ex_en = VXGE_HAL_RING_HASH_TYPE_IPV6_EX;
|
|
|
|
/* set indirection table, bucket-to-vpath mapping */
|
|
status = vxge_hal_vpath_rts_rth_itable_set(vdev->vpath_handles,
|
|
vdev->no_of_vpath, mtable,
|
|
((u32) (1 << vdev->config.rth_bkt_sz)));
|
|
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev, "rth configuration failed\n");
|
|
goto _exit0;
|
|
}
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath_handle = vxge_vpath_handle_get(vdev, i);
|
|
if (!vpath_handle)
|
|
continue;
|
|
|
|
status = vxge_hal_vpath_rts_rth_set(vpath_handle,
|
|
RTH_ALG_JENKINS,
|
|
&hash_types, vdev->config.rth_bkt_sz, TRUE);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev,
|
|
"rth configuration failed for vpath (%d)\n",
|
|
vdev->vpaths[i].vp_id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
_exit0:
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* vxge_vpath_config
|
|
* Sets HAL parameter values from kenv
|
|
*/
|
|
void
|
|
vxge_vpath_config(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
u32 no_of_vpath = 0;
|
|
vxge_hal_vp_config_t *vp_config;
|
|
vxge_hal_device_config_t *device_config = vdev->device_config;
|
|
|
|
device_config->debug_level = VXGE_TRACE;
|
|
device_config->debug_mask = VXGE_COMPONENT_ALL;
|
|
device_config->device_poll_millis = VXGE_DEFAULT_DEVICE_POLL_MILLIS;
|
|
|
|
vdev->config.no_of_vpath =
|
|
min(vdev->config.no_of_vpath, vdev->max_supported_vpath);
|
|
|
|
for (i = 0; i < VXGE_HAL_MAX_VIRTUAL_PATHS; i++) {
|
|
vp_config = &(device_config->vp_config[i]);
|
|
vp_config->fifo.enable = VXGE_HAL_FIFO_DISABLE;
|
|
vp_config->ring.enable = VXGE_HAL_RING_DISABLE;
|
|
}
|
|
|
|
for (i = 0; i < VXGE_HAL_MAX_VIRTUAL_PATHS; i++) {
|
|
if (no_of_vpath >= vdev->config.no_of_vpath)
|
|
break;
|
|
|
|
if (!bVAL1(vdev->config.hw_info.vpath_mask, i))
|
|
continue;
|
|
|
|
no_of_vpath++;
|
|
vp_config = &(device_config->vp_config[i]);
|
|
vp_config->mtu = VXGE_HAL_DEFAULT_MTU;
|
|
vp_config->ring.enable = VXGE_HAL_RING_ENABLE;
|
|
vp_config->ring.post_mode = VXGE_HAL_RING_POST_MODE_DOORBELL;
|
|
vp_config->ring.buffer_mode = VXGE_HAL_RING_RXD_BUFFER_MODE_1;
|
|
vp_config->ring.ring_length =
|
|
vxge_ring_length_get(VXGE_HAL_RING_RXD_BUFFER_MODE_1);
|
|
vp_config->ring.scatter_mode = VXGE_HAL_RING_SCATTER_MODE_A;
|
|
vp_config->rpa_all_vid_en = VXGE_DEFAULT_ALL_VID_ENABLE;
|
|
vp_config->rpa_strip_vlan_tag = VXGE_DEFAULT_STRIP_VLAN_TAG;
|
|
vp_config->rpa_ucast_all_addr_en =
|
|
VXGE_HAL_VPATH_RPA_UCAST_ALL_ADDR_DISABLE;
|
|
|
|
vp_config->rti.intr_enable = VXGE_HAL_TIM_INTR_ENABLE;
|
|
vp_config->rti.txfrm_cnt_en = VXGE_HAL_TXFRM_CNT_EN_ENABLE;
|
|
vp_config->rti.util_sel =
|
|
VXGE_HAL_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL;
|
|
|
|
vp_config->rti.uec_a = VXGE_DEFAULT_RTI_RX_UFC_A;
|
|
vp_config->rti.uec_b = VXGE_DEFAULT_RTI_RX_UFC_B;
|
|
vp_config->rti.uec_c = VXGE_DEFAULT_RTI_RX_UFC_C;
|
|
vp_config->rti.uec_d = VXGE_DEFAULT_RTI_RX_UFC_D;
|
|
|
|
vp_config->rti.urange_a = VXGE_DEFAULT_RTI_RX_URANGE_A;
|
|
vp_config->rti.urange_b = VXGE_DEFAULT_RTI_RX_URANGE_B;
|
|
vp_config->rti.urange_c = VXGE_DEFAULT_RTI_RX_URANGE_C;
|
|
|
|
vp_config->rti.timer_ac_en = VXGE_HAL_TIM_TIMER_AC_ENABLE;
|
|
vp_config->rti.timer_ci_en = VXGE_HAL_TIM_TIMER_CI_ENABLE;
|
|
|
|
vp_config->rti.btimer_val =
|
|
(VXGE_DEFAULT_RTI_BTIMER_VAL * 1000) / 272;
|
|
vp_config->rti.rtimer_val =
|
|
(VXGE_DEFAULT_RTI_RTIMER_VAL * 1000) / 272;
|
|
vp_config->rti.ltimer_val =
|
|
(VXGE_DEFAULT_RTI_LTIMER_VAL * 1000) / 272;
|
|
|
|
if ((no_of_vpath > 1) && (VXGE_DEFAULT_CONFIG_MQ_ENABLE == 0))
|
|
continue;
|
|
|
|
vp_config->fifo.enable = VXGE_HAL_FIFO_ENABLE;
|
|
vp_config->fifo.max_aligned_frags =
|
|
VXGE_DEFAULT_FIFO_ALIGNED_FRAGS;
|
|
|
|
vp_config->tti.intr_enable = VXGE_HAL_TIM_INTR_ENABLE;
|
|
vp_config->tti.txfrm_cnt_en = VXGE_HAL_TXFRM_CNT_EN_ENABLE;
|
|
vp_config->tti.util_sel =
|
|
VXGE_HAL_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL;
|
|
|
|
vp_config->tti.uec_a = VXGE_DEFAULT_TTI_TX_UFC_A;
|
|
vp_config->tti.uec_b = VXGE_DEFAULT_TTI_TX_UFC_B;
|
|
vp_config->tti.uec_c = VXGE_DEFAULT_TTI_TX_UFC_C;
|
|
vp_config->tti.uec_d = VXGE_DEFAULT_TTI_TX_UFC_D;
|
|
|
|
vp_config->tti.urange_a = VXGE_DEFAULT_TTI_TX_URANGE_A;
|
|
vp_config->tti.urange_b = VXGE_DEFAULT_TTI_TX_URANGE_B;
|
|
vp_config->tti.urange_c = VXGE_DEFAULT_TTI_TX_URANGE_C;
|
|
|
|
vp_config->tti.timer_ac_en = VXGE_HAL_TIM_TIMER_AC_ENABLE;
|
|
vp_config->tti.timer_ci_en = VXGE_HAL_TIM_TIMER_CI_ENABLE;
|
|
|
|
vp_config->tti.btimer_val =
|
|
(VXGE_DEFAULT_TTI_BTIMER_VAL * 1000) / 272;
|
|
vp_config->tti.rtimer_val =
|
|
(VXGE_DEFAULT_TTI_RTIMER_VAL * 1000) / 272;
|
|
vp_config->tti.ltimer_val =
|
|
(VXGE_DEFAULT_TTI_LTIMER_VAL * 1000) / 272;
|
|
}
|
|
|
|
vdev->no_of_vpath = no_of_vpath;
|
|
|
|
if (vdev->no_of_vpath == 1)
|
|
vdev->config.tx_steering = 0;
|
|
|
|
if (vdev->config.rth_enable && (vdev->no_of_vpath > 1)) {
|
|
device_config->rth_en = VXGE_HAL_RTH_ENABLE;
|
|
device_config->rth_it_type = VXGE_HAL_RTH_IT_TYPE_MULTI_IT;
|
|
}
|
|
|
|
vdev->config.rth_enable = device_config->rth_en;
|
|
}
|
|
|
|
/*
|
|
* vxge_vpath_cb_fn
|
|
* Virtual path Callback function
|
|
*/
|
|
/* ARGSUSED */
|
|
static vxge_hal_status_e
|
|
vxge_vpath_cb_fn(vxge_hal_client_h client_handle, vxge_hal_up_msg_h msgh,
|
|
vxge_hal_message_type_e msg_type, vxge_hal_obj_id_t obj_id,
|
|
vxge_hal_result_e result, vxge_hal_opaque_handle_t *opaque_handle)
|
|
{
|
|
return (VXGE_HAL_OK);
|
|
}
|
|
|
|
/*
|
|
* vxge_vpath_open
|
|
*/
|
|
int
|
|
vxge_vpath_open(vxge_dev_t *vdev)
|
|
{
|
|
int i, err = EINVAL;
|
|
u64 func_id;
|
|
|
|
vxge_vpath_t *vpath;
|
|
vxge_hal_vpath_attr_t vpath_attr;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
struct lro_ctrl *lro = NULL;
|
|
|
|
bzero(&vpath_attr, sizeof(vxge_hal_vpath_attr_t));
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
|
|
vpath = &(vdev->vpaths[i]);
|
|
lro = &vpath->lro;
|
|
|
|
/* Vpath vpath_attr: FIFO */
|
|
vpath_attr.vp_id = vpath->vp_id;
|
|
vpath_attr.fifo_attr.callback = vxge_tx_compl;
|
|
vpath_attr.fifo_attr.txdl_init = vxge_tx_replenish;
|
|
vpath_attr.fifo_attr.txdl_term = vxge_tx_term;
|
|
vpath_attr.fifo_attr.userdata = vpath;
|
|
vpath_attr.fifo_attr.per_txdl_space = sizeof(vxge_txdl_priv_t);
|
|
|
|
/* Vpath vpath_attr: Ring */
|
|
vpath_attr.ring_attr.callback = vxge_rx_compl;
|
|
vpath_attr.ring_attr.rxd_init = vxge_rx_replenish;
|
|
vpath_attr.ring_attr.rxd_term = vxge_rx_term;
|
|
vpath_attr.ring_attr.userdata = vpath;
|
|
vpath_attr.ring_attr.per_rxd_space = sizeof(vxge_rxd_priv_t);
|
|
|
|
err = vxge_dma_tags_create(vpath);
|
|
if (err != 0) {
|
|
device_printf(vdev->ndev,
|
|
"failed to create dma tags\n");
|
|
break;
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
vpath->br = buf_ring_alloc(VXGE_DEFAULT_BR_SIZE, M_DEVBUF,
|
|
M_WAITOK, &vpath->mtx_tx);
|
|
if (vpath->br == NULL) {
|
|
err = ENOMEM;
|
|
break;
|
|
}
|
|
#endif
|
|
status = vxge_hal_vpath_open(vdev->devh, &vpath_attr,
|
|
(vxge_hal_vpath_callback_f) vxge_vpath_cb_fn,
|
|
NULL, &vpath->handle);
|
|
if (status != VXGE_HAL_OK) {
|
|
device_printf(vdev->ndev,
|
|
"failed to open vpath (%d)\n", vpath->vp_id);
|
|
err = EPERM;
|
|
break;
|
|
}
|
|
vpath->is_open = TRUE;
|
|
vdev->vpath_handles[i] = vpath->handle;
|
|
|
|
vpath->tx_ticks = ticks;
|
|
vpath->rx_ticks = ticks;
|
|
|
|
vpath->tti_rtimer_val = VXGE_DEFAULT_TTI_RTIMER_VAL;
|
|
vpath->tti_rtimer_val = VXGE_DEFAULT_TTI_RTIMER_VAL;
|
|
|
|
vpath->tx_intr_coalesce = vdev->config.intr_coalesce;
|
|
vpath->rx_intr_coalesce = vdev->config.intr_coalesce;
|
|
|
|
func_id = vdev->config.hw_info.func_id;
|
|
|
|
if (vdev->config.low_latency &&
|
|
(vdev->config.bw_info[func_id].priority ==
|
|
VXGE_DEFAULT_VPATH_PRIORITY_HIGH)) {
|
|
vpath->tx_intr_coalesce = 0;
|
|
}
|
|
|
|
if (vdev->ifp->if_capenable & IFCAP_LRO) {
|
|
err = tcp_lro_init(lro);
|
|
if (err != 0) {
|
|
device_printf(vdev->ndev,
|
|
"LRO Initialization failed!\n");
|
|
break;
|
|
}
|
|
vpath->lro_enable = TRUE;
|
|
lro->ifp = vdev->ifp;
|
|
}
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
void
|
|
vxge_tso_config(vxge_dev_t *vdev)
|
|
{
|
|
u32 func_id, priority;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
vdev->ifp->if_capabilities |= IFCAP_TSO4;
|
|
|
|
status = vxge_bw_priority_get(vdev, NULL);
|
|
if (status == VXGE_HAL_OK) {
|
|
|
|
func_id = vdev->config.hw_info.func_id;
|
|
priority = vdev->config.bw_info[func_id].priority;
|
|
|
|
if (priority != VXGE_DEFAULT_VPATH_PRIORITY_HIGH)
|
|
vdev->ifp->if_capabilities &= ~IFCAP_TSO4;
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
if (vdev->ifp->if_capabilities & IFCAP_TSO4)
|
|
vdev->ifp->if_capabilities |= IFCAP_VLAN_HWTSO;
|
|
#endif
|
|
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_bw_priority_get(vxge_dev_t *vdev, vxge_bw_info_t *bw_info)
|
|
{
|
|
u32 priority, bandwidth;
|
|
u32 vpath_count;
|
|
|
|
u64 func_id, func_mode, vpath_list[VXGE_HAL_MAX_VIRTUAL_PATHS];
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
func_id = vdev->config.hw_info.func_id;
|
|
if (bw_info) {
|
|
func_id = bw_info->func_id;
|
|
func_mode = vdev->config.hw_info.function_mode;
|
|
if ((is_single_func(func_mode)) && (func_id > 0))
|
|
return (VXGE_HAL_FAIL);
|
|
}
|
|
|
|
if (vdev->hw_fw_version >= VXGE_FW_VERSION(1, 8, 0)) {
|
|
|
|
status = vxge_hal_vf_rx_bw_get(vdev->devh,
|
|
func_id, &bandwidth, &priority);
|
|
|
|
} else {
|
|
|
|
status = vxge_hal_get_vpath_list(vdev->devh,
|
|
func_id, vpath_list, &vpath_count);
|
|
|
|
if (status == VXGE_HAL_OK) {
|
|
status = vxge_hal_bw_priority_get(vdev->devh,
|
|
vpath_list[0], &bandwidth, &priority);
|
|
}
|
|
}
|
|
|
|
if (status == VXGE_HAL_OK) {
|
|
if (bw_info) {
|
|
bw_info->priority = priority;
|
|
bw_info->bandwidth = bandwidth;
|
|
} else {
|
|
vdev->config.bw_info[func_id].priority = priority;
|
|
vdev->config.bw_info[func_id].bandwidth = bandwidth;
|
|
}
|
|
}
|
|
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* close vpaths
|
|
*/
|
|
void
|
|
vxge_vpath_close(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
vxge_vpath_t *vpath;
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
|
|
vpath = &(vdev->vpaths[i]);
|
|
if (vpath->handle)
|
|
vxge_hal_vpath_close(vpath->handle);
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
if (vpath->br != NULL)
|
|
buf_ring_free(vpath->br, M_DEVBUF);
|
|
#endif
|
|
/* Free LRO memory */
|
|
if (vpath->lro_enable)
|
|
tcp_lro_free(&vpath->lro);
|
|
|
|
if (vpath->dma_tag_rx) {
|
|
bus_dmamap_destroy(vpath->dma_tag_rx,
|
|
vpath->extra_dma_map);
|
|
bus_dma_tag_destroy(vpath->dma_tag_rx);
|
|
}
|
|
|
|
if (vpath->dma_tag_tx)
|
|
bus_dma_tag_destroy(vpath->dma_tag_tx);
|
|
|
|
vpath->handle = NULL;
|
|
vpath->is_open = FALSE;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* reset vpaths
|
|
*/
|
|
void
|
|
vxge_vpath_reset(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
vxge_hal_vpath_h vpath_handle;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath_handle = vxge_vpath_handle_get(vdev, i);
|
|
if (!vpath_handle)
|
|
continue;
|
|
|
|
status = vxge_hal_vpath_reset(vpath_handle);
|
|
if (status != VXGE_HAL_OK)
|
|
device_printf(vdev->ndev,
|
|
"failed to reset vpath :%d\n", i);
|
|
}
|
|
}
|
|
|
|
static inline int
|
|
vxge_vpath_get(vxge_dev_t *vdev, mbuf_t mhead)
|
|
{
|
|
struct tcphdr *th = NULL;
|
|
struct udphdr *uh = NULL;
|
|
struct ip *ip = NULL;
|
|
struct ip6_hdr *ip6 = NULL;
|
|
struct ether_vlan_header *eth = NULL;
|
|
void *ulp = NULL;
|
|
|
|
int ehdrlen, iphlen = 0;
|
|
u8 ipproto = 0;
|
|
u16 etype, src_port, dst_port;
|
|
u16 queue_len, counter = 0;
|
|
|
|
src_port = dst_port = 0;
|
|
queue_len = vdev->no_of_vpath;
|
|
|
|
eth = mtod(mhead, struct ether_vlan_header *);
|
|
if (eth->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eth->evl_proto);
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eth->evl_encap_proto);
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *) (mhead->m_data + ehdrlen);
|
|
iphlen = ip->ip_hl << 2;
|
|
ipproto = ip->ip_p;
|
|
th = (struct tcphdr *) ((caddr_t)ip + iphlen);
|
|
uh = (struct udphdr *) ((caddr_t)ip + iphlen);
|
|
break;
|
|
|
|
case ETHERTYPE_IPV6:
|
|
ip6 = (struct ip6_hdr *) (mhead->m_data + ehdrlen);
|
|
iphlen = sizeof(struct ip6_hdr);
|
|
ipproto = ip6->ip6_nxt;
|
|
|
|
ulp = mtod(mhead, char *) + iphlen;
|
|
th = ((struct tcphdr *) (ulp));
|
|
uh = ((struct udphdr *) (ulp));
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (ipproto) {
|
|
case IPPROTO_TCP:
|
|
src_port = th->th_sport;
|
|
dst_port = th->th_dport;
|
|
break;
|
|
|
|
case IPPROTO_UDP:
|
|
src_port = uh->uh_sport;
|
|
dst_port = uh->uh_dport;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
counter = (ntohs(src_port) + ntohs(dst_port)) &
|
|
vpath_selector[queue_len - 1];
|
|
|
|
if (counter >= queue_len)
|
|
counter = queue_len - 1;
|
|
|
|
return (counter);
|
|
}
|
|
|
|
static inline vxge_hal_vpath_h
|
|
vxge_vpath_handle_get(vxge_dev_t *vdev, int i)
|
|
{
|
|
return (vdev->vpaths[i].is_open ? vdev->vpaths[i].handle : NULL);
|
|
}
|
|
|
|
int
|
|
vxge_firmware_verify(vxge_dev_t *vdev)
|
|
{
|
|
int err = 0;
|
|
u64 active_config;
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
if (vdev->fw_upgrade) {
|
|
status = vxge_firmware_upgrade(vdev);
|
|
if (status == VXGE_HAL_OK) {
|
|
err = ENXIO;
|
|
goto _exit0;
|
|
}
|
|
}
|
|
|
|
if ((vdev->config.function_mode != VXGE_DEFAULT_CONFIG_VALUE) &&
|
|
(vdev->config.hw_info.function_mode !=
|
|
(u64) vdev->config.function_mode)) {
|
|
|
|
status = vxge_func_mode_set(vdev);
|
|
if (status == VXGE_HAL_OK)
|
|
err = ENXIO;
|
|
}
|
|
|
|
/* l2_switch configuration */
|
|
active_config = VXGE_DEFAULT_CONFIG_VALUE;
|
|
status = vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_L2SwitchEnabled,
|
|
&active_config);
|
|
|
|
if (status == VXGE_HAL_OK) {
|
|
vdev->l2_switch = active_config;
|
|
if (vdev->config.l2_switch != VXGE_DEFAULT_CONFIG_VALUE) {
|
|
if (vdev->config.l2_switch != active_config) {
|
|
status = vxge_l2switch_mode_set(vdev);
|
|
if (status == VXGE_HAL_OK)
|
|
err = ENXIO;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (vdev->config.hw_info.ports == VXGE_DUAL_PORT_MODE) {
|
|
if (vxge_port_mode_update(vdev) == ENXIO)
|
|
err = ENXIO;
|
|
}
|
|
|
|
_exit0:
|
|
if (err == ENXIO)
|
|
device_printf(vdev->ndev, "PLEASE POWER CYCLE THE SYSTEM\n");
|
|
|
|
return (err);
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_firmware_upgrade(vxge_dev_t *vdev)
|
|
{
|
|
u8 *fw_buffer;
|
|
u32 fw_size;
|
|
vxge_hal_device_hw_info_t *hw_info;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
hw_info = &vdev->config.hw_info;
|
|
|
|
fw_size = sizeof(VXGE_FW_ARRAY_NAME);
|
|
fw_buffer = (u8 *) VXGE_FW_ARRAY_NAME;
|
|
|
|
device_printf(vdev->ndev, "Current firmware version : %s (%s)\n",
|
|
hw_info->fw_version.version, hw_info->fw_date.date);
|
|
|
|
device_printf(vdev->ndev, "Upgrading firmware to %d.%d.%d\n",
|
|
VXGE_MIN_FW_MAJOR_VERSION, VXGE_MIN_FW_MINOR_VERSION,
|
|
VXGE_MIN_FW_BUILD_NUMBER);
|
|
|
|
/* Call HAL API to upgrade firmware */
|
|
status = vxge_hal_mrpcim_fw_upgrade(vdev->pdev,
|
|
(pci_reg_h) vdev->pdev->reg_map[0],
|
|
(u8 *) vdev->pdev->bar_info[0],
|
|
fw_buffer, fw_size);
|
|
|
|
device_printf(vdev->ndev, "firmware upgrade %s\n",
|
|
(status == VXGE_HAL_OK) ? "successful" : "failed");
|
|
|
|
return (status);
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_func_mode_set(vxge_dev_t *vdev)
|
|
{
|
|
u64 active_config;
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
status = vxge_hal_mrpcim_pcie_func_mode_set(vdev->devh,
|
|
vdev->config.function_mode);
|
|
device_printf(vdev->ndev,
|
|
"function mode change %s\n",
|
|
(status == VXGE_HAL_OK) ? "successful" : "failed");
|
|
|
|
if (status == VXGE_HAL_OK) {
|
|
vxge_hal_set_fw_api(vdev->devh, 0ULL,
|
|
VXGE_HAL_API_FUNC_MODE_COMMIT,
|
|
0, 0ULL, 0ULL);
|
|
|
|
vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_NWPortMode,
|
|
&active_config);
|
|
|
|
/*
|
|
* If in MF + DP mode
|
|
* if user changes to SF, change port_mode to single port mode
|
|
*/
|
|
if (((is_multi_func(vdev->config.hw_info.function_mode)) &&
|
|
is_single_func(vdev->config.function_mode)) &&
|
|
(active_config == VXGE_HAL_DP_NP_MODE_DUAL_PORT)) {
|
|
vdev->config.port_mode =
|
|
VXGE_HAL_DP_NP_MODE_SINGLE_PORT;
|
|
|
|
status = vxge_port_mode_set(vdev);
|
|
}
|
|
}
|
|
return (status);
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_port_mode_set(vxge_dev_t *vdev)
|
|
{
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
status = vxge_hal_set_port_mode(vdev->devh, vdev->config.port_mode);
|
|
device_printf(vdev->ndev,
|
|
"port mode change %s\n",
|
|
(status == VXGE_HAL_OK) ? "successful" : "failed");
|
|
|
|
if (status == VXGE_HAL_OK) {
|
|
vxge_hal_set_fw_api(vdev->devh, 0ULL,
|
|
VXGE_HAL_API_FUNC_MODE_COMMIT,
|
|
0, 0ULL, 0ULL);
|
|
|
|
/* Configure vpath_mapping for active-active mode only */
|
|
if (vdev->config.port_mode == VXGE_HAL_DP_NP_MODE_DUAL_PORT) {
|
|
|
|
status = vxge_hal_config_vpath_map(vdev->devh,
|
|
VXGE_DUAL_PORT_MAP);
|
|
|
|
device_printf(vdev->ndev, "dual port map change %s\n",
|
|
(status == VXGE_HAL_OK) ? "successful" : "failed");
|
|
}
|
|
}
|
|
return (status);
|
|
}
|
|
|
|
int
|
|
vxge_port_mode_update(vxge_dev_t *vdev)
|
|
{
|
|
int err = 0;
|
|
u64 active_config;
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
if ((vdev->config.port_mode == VXGE_HAL_DP_NP_MODE_DUAL_PORT) &&
|
|
is_single_func(vdev->config.hw_info.function_mode)) {
|
|
|
|
device_printf(vdev->ndev,
|
|
"Adapter in SF mode, dual port mode is not allowed\n");
|
|
err = EPERM;
|
|
goto _exit0;
|
|
}
|
|
|
|
active_config = VXGE_DEFAULT_CONFIG_VALUE;
|
|
status = vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_NWPortMode,
|
|
&active_config);
|
|
if (status != VXGE_HAL_OK) {
|
|
err = EINVAL;
|
|
goto _exit0;
|
|
}
|
|
|
|
vdev->port_mode = active_config;
|
|
if (vdev->config.port_mode != VXGE_DEFAULT_CONFIG_VALUE) {
|
|
if (vdev->config.port_mode != vdev->port_mode) {
|
|
status = vxge_port_mode_set(vdev);
|
|
if (status != VXGE_HAL_OK) {
|
|
err = EINVAL;
|
|
goto _exit0;
|
|
}
|
|
err = ENXIO;
|
|
vdev->port_mode = vdev->config.port_mode;
|
|
}
|
|
}
|
|
|
|
active_config = VXGE_DEFAULT_CONFIG_VALUE;
|
|
status = vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_BehaviourOnFail,
|
|
&active_config);
|
|
if (status != VXGE_HAL_OK) {
|
|
err = EINVAL;
|
|
goto _exit0;
|
|
}
|
|
|
|
vdev->port_failure = active_config;
|
|
|
|
/*
|
|
* active/active mode : set to NoMove
|
|
* active/passive mode: set to Failover-Failback
|
|
*/
|
|
if (vdev->port_mode == VXGE_HAL_DP_NP_MODE_DUAL_PORT)
|
|
vdev->config.port_failure =
|
|
VXGE_HAL_XMAC_NWIF_OnFailure_NoMove;
|
|
|
|
else if (vdev->port_mode == VXGE_HAL_DP_NP_MODE_ACTIVE_PASSIVE)
|
|
vdev->config.port_failure =
|
|
VXGE_HAL_XMAC_NWIF_OnFailure_OtherPortBackOnRestore;
|
|
|
|
if ((vdev->port_mode != VXGE_HAL_DP_NP_MODE_SINGLE_PORT) &&
|
|
(vdev->config.port_failure != vdev->port_failure)) {
|
|
status = vxge_port_behavior_on_failure_set(vdev);
|
|
if (status == VXGE_HAL_OK)
|
|
err = ENXIO;
|
|
}
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_port_mode_get(vxge_dev_t *vdev, vxge_port_info_t *port_info)
|
|
{
|
|
int err = 0;
|
|
u64 active_config;
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
active_config = VXGE_DEFAULT_CONFIG_VALUE;
|
|
status = vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_NWPortMode,
|
|
&active_config);
|
|
|
|
if (status != VXGE_HAL_OK) {
|
|
err = ENXIO;
|
|
goto _exit0;
|
|
}
|
|
|
|
port_info->port_mode = active_config;
|
|
|
|
active_config = VXGE_DEFAULT_CONFIG_VALUE;
|
|
status = vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_BehaviourOnFail,
|
|
&active_config);
|
|
if (status != VXGE_HAL_OK) {
|
|
err = ENXIO;
|
|
goto _exit0;
|
|
}
|
|
|
|
port_info->port_failure = active_config;
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_port_behavior_on_failure_set(vxge_dev_t *vdev)
|
|
{
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
status = vxge_hal_set_behavior_on_failure(vdev->devh,
|
|
vdev->config.port_failure);
|
|
|
|
device_printf(vdev->ndev,
|
|
"port behaviour on failure change %s\n",
|
|
(status == VXGE_HAL_OK) ? "successful" : "failed");
|
|
|
|
if (status == VXGE_HAL_OK)
|
|
vxge_hal_set_fw_api(vdev->devh, 0ULL,
|
|
VXGE_HAL_API_FUNC_MODE_COMMIT,
|
|
0, 0ULL, 0ULL);
|
|
|
|
return (status);
|
|
}
|
|
|
|
void
|
|
vxge_active_port_update(vxge_dev_t *vdev)
|
|
{
|
|
u64 active_config;
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
active_config = VXGE_DEFAULT_CONFIG_VALUE;
|
|
status = vxge_hal_get_active_config(vdev->devh,
|
|
VXGE_HAL_XMAC_NWIF_ActConfig_ActivePort,
|
|
&active_config);
|
|
|
|
if (status == VXGE_HAL_OK)
|
|
vdev->active_port = active_config;
|
|
}
|
|
|
|
vxge_hal_status_e
|
|
vxge_l2switch_mode_set(vxge_dev_t *vdev)
|
|
{
|
|
vxge_hal_status_e status = VXGE_HAL_FAIL;
|
|
|
|
status = vxge_hal_set_l2switch_mode(vdev->devh,
|
|
vdev->config.l2_switch);
|
|
|
|
device_printf(vdev->ndev, "L2 switch %s\n",
|
|
(status == VXGE_HAL_OK) ?
|
|
(vdev->config.l2_switch) ? "enable" : "disable" :
|
|
"change failed");
|
|
|
|
if (status == VXGE_HAL_OK)
|
|
vxge_hal_set_fw_api(vdev->devh, 0ULL,
|
|
VXGE_HAL_API_FUNC_MODE_COMMIT,
|
|
0, 0ULL, 0ULL);
|
|
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* vxge_promisc_set
|
|
* Enable Promiscuous Mode
|
|
*/
|
|
void
|
|
vxge_promisc_set(vxge_dev_t *vdev)
|
|
{
|
|
int i;
|
|
ifnet_t ifp;
|
|
vxge_hal_vpath_h vpath_handle;
|
|
|
|
if (!vdev->is_initialized)
|
|
return;
|
|
|
|
ifp = vdev->ifp;
|
|
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath_handle = vxge_vpath_handle_get(vdev, i);
|
|
if (!vpath_handle)
|
|
continue;
|
|
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
vxge_hal_vpath_promisc_enable(vpath_handle);
|
|
else
|
|
vxge_hal_vpath_promisc_disable(vpath_handle);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_change_mtu
|
|
* Change interface MTU to a requested valid size
|
|
*/
|
|
int
|
|
vxge_change_mtu(vxge_dev_t *vdev, unsigned long new_mtu)
|
|
{
|
|
int err = EINVAL;
|
|
|
|
if ((new_mtu < VXGE_HAL_MIN_MTU) || (new_mtu > VXGE_HAL_MAX_MTU))
|
|
goto _exit0;
|
|
|
|
(vdev->ifp)->if_mtu = new_mtu;
|
|
device_printf(vdev->ndev, "MTU changed to %u\n", (vdev->ifp)->if_mtu);
|
|
|
|
if (vdev->is_initialized) {
|
|
if_down(vdev->ifp);
|
|
vxge_reset(vdev);
|
|
if_up(vdev->ifp);
|
|
}
|
|
err = 0;
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* Creates DMA tags for both Tx and Rx
|
|
*/
|
|
int
|
|
vxge_dma_tags_create(vxge_vpath_t *vpath)
|
|
{
|
|
int err = 0;
|
|
bus_size_t max_size, boundary;
|
|
vxge_dev_t *vdev = vpath->vdev;
|
|
ifnet_t ifp = vdev->ifp;
|
|
|
|
max_size = ifp->if_mtu +
|
|
VXGE_HAL_MAC_HEADER_MAX_SIZE +
|
|
VXGE_HAL_HEADER_ETHERNET_II_802_3_ALIGN;
|
|
|
|
VXGE_BUFFER_ALIGN(max_size, 128)
|
|
if (max_size <= MCLBYTES)
|
|
vdev->rx_mbuf_sz = MCLBYTES;
|
|
else
|
|
vdev->rx_mbuf_sz =
|
|
(max_size > MJUMPAGESIZE) ? MJUM9BYTES : MJUMPAGESIZE;
|
|
|
|
boundary = (max_size > PAGE_SIZE) ? 0 : PAGE_SIZE;
|
|
|
|
/* DMA tag for Tx */
|
|
err = bus_dma_tag_create(
|
|
bus_get_dma_tag(vdev->ndev),
|
|
1,
|
|
PAGE_SIZE,
|
|
BUS_SPACE_MAXADDR,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL,
|
|
NULL,
|
|
VXGE_TSO_SIZE,
|
|
VXGE_MAX_SEGS,
|
|
PAGE_SIZE,
|
|
BUS_DMA_ALLOCNOW,
|
|
NULL,
|
|
NULL,
|
|
&(vpath->dma_tag_tx));
|
|
if (err != 0)
|
|
goto _exit0;
|
|
|
|
/* DMA tag for Rx */
|
|
err = bus_dma_tag_create(
|
|
bus_get_dma_tag(vdev->ndev),
|
|
1,
|
|
boundary,
|
|
BUS_SPACE_MAXADDR,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL,
|
|
NULL,
|
|
vdev->rx_mbuf_sz,
|
|
1,
|
|
vdev->rx_mbuf_sz,
|
|
BUS_DMA_ALLOCNOW,
|
|
NULL,
|
|
NULL,
|
|
&(vpath->dma_tag_rx));
|
|
if (err != 0)
|
|
goto _exit1;
|
|
|
|
/* Create DMA map for this descriptor */
|
|
err = bus_dmamap_create(vpath->dma_tag_rx, BUS_DMA_NOWAIT,
|
|
&vpath->extra_dma_map);
|
|
if (err == 0)
|
|
goto _exit0;
|
|
|
|
bus_dma_tag_destroy(vpath->dma_tag_rx);
|
|
|
|
_exit1:
|
|
bus_dma_tag_destroy(vpath->dma_tag_tx);
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
static inline int
|
|
vxge_dma_mbuf_coalesce(bus_dma_tag_t dma_tag_tx, bus_dmamap_t dma_map,
|
|
mbuf_t * m_headp, bus_dma_segment_t * dma_buffers,
|
|
int *num_segs)
|
|
{
|
|
int err = 0;
|
|
mbuf_t mbuf_pkt = NULL;
|
|
|
|
retry:
|
|
err = bus_dmamap_load_mbuf_sg(dma_tag_tx, dma_map, *m_headp,
|
|
dma_buffers, num_segs, BUS_DMA_NOWAIT);
|
|
if (err == EFBIG) {
|
|
/* try to defrag, too many segments */
|
|
mbuf_pkt = m_defrag(*m_headp, M_NOWAIT);
|
|
if (mbuf_pkt == NULL) {
|
|
err = ENOBUFS;
|
|
goto _exit0;
|
|
}
|
|
*m_headp = mbuf_pkt;
|
|
goto retry;
|
|
}
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
int
|
|
vxge_device_hw_info_get(vxge_dev_t *vdev)
|
|
{
|
|
int i, err = ENXIO;
|
|
u64 vpath_mask = 0;
|
|
u32 max_supported_vpath = 0;
|
|
u32 fw_ver_maj_min;
|
|
vxge_firmware_upgrade_e fw_option;
|
|
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
vxge_hal_device_hw_info_t *hw_info;
|
|
|
|
status = vxge_hal_device_hw_info_get(vdev->pdev,
|
|
(pci_reg_h) vdev->pdev->reg_map[0],
|
|
(u8 *) vdev->pdev->bar_info[0],
|
|
&vdev->config.hw_info);
|
|
|
|
if (status != VXGE_HAL_OK)
|
|
goto _exit0;
|
|
|
|
hw_info = &vdev->config.hw_info;
|
|
|
|
vpath_mask = hw_info->vpath_mask;
|
|
if (vpath_mask == 0) {
|
|
device_printf(vdev->ndev, "No vpaths available in device\n");
|
|
goto _exit0;
|
|
}
|
|
|
|
fw_option = vdev->config.fw_option;
|
|
|
|
/* Check how many vpaths are available */
|
|
for (i = 0; i < VXGE_HAL_MAX_VIRTUAL_PATHS; i++) {
|
|
if (!((vpath_mask) & mBIT(i)))
|
|
continue;
|
|
max_supported_vpath++;
|
|
}
|
|
|
|
vdev->max_supported_vpath = max_supported_vpath;
|
|
status = vxge_hal_device_is_privileged(hw_info->host_type,
|
|
hw_info->func_id);
|
|
vdev->is_privilaged = (status == VXGE_HAL_OK) ? TRUE : FALSE;
|
|
|
|
vdev->hw_fw_version = VXGE_FW_VERSION(
|
|
hw_info->fw_version.major,
|
|
hw_info->fw_version.minor,
|
|
hw_info->fw_version.build);
|
|
|
|
fw_ver_maj_min =
|
|
VXGE_FW_MAJ_MIN_VERSION(hw_info->fw_version.major,
|
|
hw_info->fw_version.minor);
|
|
|
|
if ((fw_option >= VXGE_FW_UPGRADE_FORCE) ||
|
|
(vdev->hw_fw_version != VXGE_DRV_FW_VERSION)) {
|
|
|
|
/* For fw_ver 1.8.1 and above ignore build number. */
|
|
if ((fw_option == VXGE_FW_UPGRADE_ALL) &&
|
|
((vdev->hw_fw_version >= VXGE_FW_VERSION(1, 8, 1)) &&
|
|
(fw_ver_maj_min == VXGE_DRV_FW_MAJ_MIN_VERSION))) {
|
|
goto _exit1;
|
|
}
|
|
|
|
if (vdev->hw_fw_version < VXGE_BASE_FW_VERSION) {
|
|
device_printf(vdev->ndev,
|
|
"Upgrade driver through vxge_update, "
|
|
"Unable to load the driver.\n");
|
|
goto _exit0;
|
|
}
|
|
vdev->fw_upgrade = TRUE;
|
|
}
|
|
|
|
_exit1:
|
|
err = 0;
|
|
|
|
_exit0:
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_device_hw_info_print
|
|
* Print device and driver information
|
|
*/
|
|
void
|
|
vxge_device_hw_info_print(vxge_dev_t *vdev)
|
|
{
|
|
u32 i;
|
|
device_t ndev;
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
char pmd_type[2][VXGE_PMD_INFO_LEN];
|
|
|
|
vxge_hal_device_t *hldev;
|
|
vxge_hal_device_hw_info_t *hw_info;
|
|
vxge_hal_device_pmd_info_t *pmd_port;
|
|
|
|
hldev = vdev->devh;
|
|
ndev = vdev->ndev;
|
|
|
|
ctx = device_get_sysctl_ctx(ndev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(ndev));
|
|
|
|
hw_info = &(vdev->config.hw_info);
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_DRV_VERSION],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_DRV_VERSION]),
|
|
"%d.%d.%d.%d", XGELL_VERSION_MAJOR, XGELL_VERSION_MINOR,
|
|
XGELL_VERSION_FIX, XGELL_VERSION_BUILD);
|
|
|
|
/* Print PCI-e bus type/speed/width info */
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_PCIE_INFO],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_PCIE_INFO]),
|
|
"x%d", hldev->link_width);
|
|
|
|
if (hldev->link_width <= VXGE_HAL_PCI_E_LINK_WIDTH_X4)
|
|
device_printf(ndev, "For optimal performance a x8 "
|
|
"PCI-Express slot is required.\n");
|
|
|
|
vxge_null_terminate((char *) hw_info->serial_number,
|
|
sizeof(hw_info->serial_number));
|
|
|
|
vxge_null_terminate((char *) hw_info->part_number,
|
|
sizeof(hw_info->part_number));
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_SERIAL_NO],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_SERIAL_NO]),
|
|
"%s", hw_info->serial_number);
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_PART_NO],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_PART_NO]),
|
|
"%s", hw_info->part_number);
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FW_VERSION],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FW_VERSION]),
|
|
"%s", hw_info->fw_version.version);
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FW_DATE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FW_DATE]),
|
|
"%s", hw_info->fw_date.date);
|
|
|
|
pmd_port = &(hw_info->pmd_port0);
|
|
for (i = 0; i < hw_info->ports; i++) {
|
|
|
|
vxge_pmd_port_type_get(vdev, pmd_port->type,
|
|
pmd_type[i], sizeof(pmd_type[i]));
|
|
|
|
strncpy(vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_0 + i],
|
|
"vendor=??, sn=??, pn=??, type=??",
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_0 + i]));
|
|
|
|
vxge_null_terminate(pmd_port->vendor, sizeof(pmd_port->vendor));
|
|
if (strlen(pmd_port->vendor) == 0) {
|
|
pmd_port = &(hw_info->pmd_port1);
|
|
continue;
|
|
}
|
|
|
|
vxge_null_terminate(pmd_port->ser_num,
|
|
sizeof(pmd_port->ser_num));
|
|
|
|
vxge_null_terminate(pmd_port->part_num,
|
|
sizeof(pmd_port->part_num));
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_0 + i],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_0 + i]),
|
|
"vendor=%s, sn=%s, pn=%s, type=%s",
|
|
pmd_port->vendor, pmd_port->ser_num,
|
|
pmd_port->part_num, pmd_type[i]);
|
|
|
|
pmd_port = &(hw_info->pmd_port1);
|
|
}
|
|
|
|
switch (hw_info->function_mode) {
|
|
case VXGE_HAL_PCIE_FUNC_MODE_SF1_VP17:
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE]),
|
|
"%s %d %s", "Single Function - 1 function(s)",
|
|
vdev->max_supported_vpath, "VPath(s)/function");
|
|
break;
|
|
|
|
case VXGE_HAL_PCIE_FUNC_MODE_MF2_VP8:
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE]),
|
|
"%s %d %s", "Multi Function - 2 function(s)",
|
|
vdev->max_supported_vpath, "VPath(s)/function");
|
|
break;
|
|
|
|
case VXGE_HAL_PCIE_FUNC_MODE_MF4_VP4:
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE]),
|
|
"%s %d %s", "Multi Function - 4 function(s)",
|
|
vdev->max_supported_vpath, "VPath(s)/function");
|
|
break;
|
|
|
|
case VXGE_HAL_PCIE_FUNC_MODE_MF8_VP2:
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE]),
|
|
"%s %d %s", "Multi Function - 8 function(s)",
|
|
vdev->max_supported_vpath, "VPath(s)/function");
|
|
break;
|
|
|
|
case VXGE_HAL_PCIE_FUNC_MODE_MF8P_VP2:
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE]),
|
|
"%s %d %s", "Multi Function (DirectIO) - 8 function(s)",
|
|
vdev->max_supported_vpath, "VPath(s)/function");
|
|
break;
|
|
}
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_INTR_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_INTR_MODE]),
|
|
"%s", ((vdev->config.intr_mode == VXGE_HAL_INTR_MODE_MSIX) ?
|
|
"MSI-X" : "INTA"));
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_VPATH_COUNT],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_VPATH_COUNT]),
|
|
"%d", vdev->no_of_vpath);
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_MTU_SIZE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_MTU_SIZE]),
|
|
"%u", vdev->ifp->if_mtu);
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_LRO_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_LRO_MODE]),
|
|
"%s", ((vdev->config.lro_enable) ? "Enabled" : "Disabled"));
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_RTH_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_RTH_MODE]),
|
|
"%s", ((vdev->config.rth_enable) ? "Enabled" : "Disabled"));
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_TSO_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_TSO_MODE]),
|
|
"%s", ((vdev->ifp->if_capenable & IFCAP_TSO4) ?
|
|
"Enabled" : "Disabled"));
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_ADAPTER_TYPE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_ADAPTER_TYPE]),
|
|
"%s", ((hw_info->ports == 1) ? "Single Port" : "Dual Port"));
|
|
|
|
if (vdev->is_privilaged) {
|
|
|
|
if (hw_info->ports > 1) {
|
|
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_PORT_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_PORT_MODE]),
|
|
"%s", vxge_port_mode[vdev->port_mode]);
|
|
|
|
if (vdev->port_mode != VXGE_HAL_DP_NP_MODE_SINGLE_PORT)
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_PORT_FAILURE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_PORT_FAILURE]),
|
|
"%s", vxge_port_failure[vdev->port_failure]);
|
|
|
|
vxge_active_port_update(vdev);
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_ACTIVE_PORT],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_ACTIVE_PORT]),
|
|
"%lld", vdev->active_port);
|
|
}
|
|
|
|
if (!is_single_func(hw_info->function_mode)) {
|
|
snprintf(vdev->config.nic_attr[VXGE_PRINT_L2SWITCH_MODE],
|
|
sizeof(vdev->config.nic_attr[VXGE_PRINT_L2SWITCH_MODE]),
|
|
"%s", ((vdev->l2_switch) ? "Enabled" : "Disabled"));
|
|
}
|
|
}
|
|
|
|
device_printf(ndev, "Driver version\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_DRV_VERSION]);
|
|
|
|
device_printf(ndev, "Serial number\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_SERIAL_NO]);
|
|
|
|
device_printf(ndev, "Part number\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_PART_NO]);
|
|
|
|
device_printf(ndev, "Firmware version\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_FW_VERSION]);
|
|
|
|
device_printf(ndev, "Firmware date\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_FW_DATE]);
|
|
|
|
device_printf(ndev, "Link width\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_PCIE_INFO]);
|
|
|
|
if (vdev->is_privilaged) {
|
|
device_printf(ndev, "Function mode\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE]);
|
|
}
|
|
|
|
device_printf(ndev, "Interrupt type\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_INTR_MODE]);
|
|
|
|
device_printf(ndev, "VPath(s) opened\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_VPATH_COUNT]);
|
|
|
|
device_printf(ndev, "Adapter Type\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_ADAPTER_TYPE]);
|
|
|
|
device_printf(ndev, "PMD Port 0\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_0]);
|
|
|
|
if (hw_info->ports > 1) {
|
|
device_printf(ndev, "PMD Port 1\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_1]);
|
|
|
|
if (vdev->is_privilaged) {
|
|
device_printf(ndev, "Port Mode\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_PORT_MODE]);
|
|
|
|
if (vdev->port_mode != VXGE_HAL_DP_NP_MODE_SINGLE_PORT)
|
|
device_printf(ndev, "Port Failure\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_PORT_FAILURE]);
|
|
|
|
device_printf(vdev->ndev, "Active Port\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_ACTIVE_PORT]);
|
|
}
|
|
}
|
|
|
|
if (vdev->is_privilaged && !is_single_func(hw_info->function_mode)) {
|
|
device_printf(vdev->ndev, "L2 Switch\t: %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_L2SWITCH_MODE]);
|
|
}
|
|
|
|
device_printf(ndev, "MTU is %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_MTU_SIZE]);
|
|
|
|
device_printf(ndev, "LRO %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_LRO_MODE]);
|
|
|
|
device_printf(ndev, "RTH %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_RTH_MODE]);
|
|
|
|
device_printf(ndev, "TSO %s\n",
|
|
vdev->config.nic_attr[VXGE_PRINT_TSO_MODE]);
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Driver version", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_DRV_VERSION],
|
|
0, "Driver version");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Serial number", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_SERIAL_NO],
|
|
0, "Serial number");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Part number", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_PART_NO],
|
|
0, "Part number");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Firmware version", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_FW_VERSION],
|
|
0, "Firmware version");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Firmware date", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_FW_DATE],
|
|
0, "Firmware date");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Link width", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_PCIE_INFO],
|
|
0, "Link width");
|
|
|
|
if (vdev->is_privilaged) {
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Function mode", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_FUNC_MODE],
|
|
0, "Function mode");
|
|
}
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Interrupt type", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_INTR_MODE],
|
|
0, "Interrupt type");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "VPath(s) opened", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_VPATH_COUNT],
|
|
0, "VPath(s) opened");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Adapter Type", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_ADAPTER_TYPE],
|
|
0, "Adapter Type");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "pmd port 0", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_0],
|
|
0, "pmd port");
|
|
|
|
if (hw_info->ports > 1) {
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "pmd port 1", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_PMD_PORTS_1],
|
|
0, "pmd port");
|
|
|
|
if (vdev->is_privilaged) {
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Port Mode", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_PORT_MODE],
|
|
0, "Port Mode");
|
|
|
|
if (vdev->port_mode != VXGE_HAL_DP_NP_MODE_SINGLE_PORT)
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "Port Failure", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_PORT_FAILURE],
|
|
0, "Port Failure");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "L2 Switch", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_L2SWITCH_MODE],
|
|
0, "L2 Switch");
|
|
}
|
|
}
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "LRO mode", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_LRO_MODE],
|
|
0, "LRO mode");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "RTH mode", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_RTH_MODE],
|
|
0, "RTH mode");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children,
|
|
OID_AUTO, "TSO mode", CTLFLAG_RD,
|
|
vdev->config.nic_attr[VXGE_PRINT_TSO_MODE],
|
|
0, "TSO mode");
|
|
}
|
|
|
|
void
|
|
vxge_pmd_port_type_get(vxge_dev_t *vdev, u32 port_type,
|
|
char *ifm_name, u8 ifm_len)
|
|
{
|
|
|
|
vdev->ifm_optics = IFM_UNKNOWN;
|
|
|
|
switch (port_type) {
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_SR:
|
|
vdev->ifm_optics = IFM_10G_SR;
|
|
strlcpy(ifm_name, "10GbE SR", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_LR:
|
|
vdev->ifm_optics = IFM_10G_LR;
|
|
strlcpy(ifm_name, "10GbE LR", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_LRM:
|
|
vdev->ifm_optics = IFM_10G_LRM;
|
|
strlcpy(ifm_name, "10GbE LRM", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_DIRECT:
|
|
vdev->ifm_optics = IFM_10G_TWINAX;
|
|
strlcpy(ifm_name, "10GbE DA (Direct Attached)", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_CX4:
|
|
vdev->ifm_optics = IFM_10G_CX4;
|
|
strlcpy(ifm_name, "10GbE CX4", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_BASE_T:
|
|
#if __FreeBSD_version >= 800000
|
|
vdev->ifm_optics = IFM_10G_T;
|
|
#endif
|
|
strlcpy(ifm_name, "10GbE baseT", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_10G_OTHER:
|
|
strlcpy(ifm_name, "10GbE Other", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_SX:
|
|
vdev->ifm_optics = IFM_1000_SX;
|
|
strlcpy(ifm_name, "1GbE SX", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_LX:
|
|
vdev->ifm_optics = IFM_1000_LX;
|
|
strlcpy(ifm_name, "1GbE LX", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_CX:
|
|
vdev->ifm_optics = IFM_1000_CX;
|
|
strlcpy(ifm_name, "1GbE CX", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_BASE_T:
|
|
vdev->ifm_optics = IFM_1000_T;
|
|
strlcpy(ifm_name, "1GbE baseT", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_DIRECT:
|
|
strlcpy(ifm_name, "1GbE DA (Direct Attached)",
|
|
ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_CX4:
|
|
strlcpy(ifm_name, "1GbE CX4", ifm_len);
|
|
break;
|
|
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_1G_OTHER:
|
|
strlcpy(ifm_name, "1GbE Other", ifm_len);
|
|
break;
|
|
|
|
default:
|
|
case VXGE_HAL_DEVICE_PMD_TYPE_UNKNOWN:
|
|
strlcpy(ifm_name, "UNSUP", ifm_len);
|
|
break;
|
|
}
|
|
}
|
|
|
|
u32
|
|
vxge_ring_length_get(u32 buffer_mode)
|
|
{
|
|
return (VXGE_DEFAULT_RING_BLOCK *
|
|
vxge_hal_ring_rxds_per_block_get(buffer_mode));
|
|
}
|
|
|
|
/*
|
|
* Removes trailing spaces padded
|
|
* and NULL terminates strings
|
|
*/
|
|
static inline void
|
|
vxge_null_terminate(char *str, size_t len)
|
|
{
|
|
len--;
|
|
while (*str && (*str != ' ') && (len != 0))
|
|
++str;
|
|
|
|
--len;
|
|
if (*str)
|
|
*str = '\0';
|
|
}
|
|
|
|
/*
|
|
* vxge_ioctl
|
|
* Callback to control the device
|
|
*/
|
|
int
|
|
vxge_ioctl(ifnet_t ifp, u_long command, caddr_t data)
|
|
{
|
|
int mask, err = 0;
|
|
vxge_dev_t *vdev = (vxge_dev_t *) ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
|
|
if (!vdev->is_active)
|
|
return (EBUSY);
|
|
|
|
switch (command) {
|
|
/* Set/Get ifnet address */
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
/* Set Interface MTU */
|
|
case SIOCSIFMTU:
|
|
err = vxge_change_mtu(vdev, (unsigned long)ifr->ifr_mtu);
|
|
break;
|
|
|
|
/* Set Interface Flags */
|
|
case SIOCSIFFLAGS:
|
|
VXGE_DRV_LOCK(vdev);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
if ((ifp->if_flags ^ vdev->if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI))
|
|
vxge_promisc_set(vdev);
|
|
} else {
|
|
vxge_init_locked(vdev);
|
|
}
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
vxge_stop_locked(vdev);
|
|
}
|
|
vdev->if_flags = ifp->if_flags;
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
break;
|
|
|
|
/* Add/delete multicast address */
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
break;
|
|
|
|
/* Get/Set Interface Media */
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
err = ifmedia_ioctl(ifp, ifr, &vdev->media, command);
|
|
break;
|
|
|
|
/* Set Capabilities */
|
|
case SIOCSIFCAP:
|
|
VXGE_DRV_LOCK(vdev);
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
|
|
if (mask & IFCAP_TXCSUM) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
ifp->if_hwassist ^= (CSUM_TCP | CSUM_UDP | CSUM_IP);
|
|
|
|
if ((ifp->if_capenable & IFCAP_TSO) &&
|
|
!(ifp->if_capenable & IFCAP_TXCSUM)) {
|
|
|
|
ifp->if_capenable &= ~IFCAP_TSO;
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
if_printf(ifp, "TSO Disabled\n");
|
|
}
|
|
}
|
|
if (mask & IFCAP_RXCSUM)
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
|
|
if (mask & IFCAP_TSO4) {
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
|
|
if (ifp->if_capenable & IFCAP_TSO) {
|
|
if (ifp->if_capenable & IFCAP_TXCSUM) {
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
if_printf(ifp, "TSO Enabled\n");
|
|
} else {
|
|
ifp->if_capenable &= ~IFCAP_TSO;
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
if_printf(ifp,
|
|
"Enable tx checksum offload \
|
|
first.\n");
|
|
err = EAGAIN;
|
|
}
|
|
} else {
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
if_printf(ifp, "TSO Disabled\n");
|
|
}
|
|
}
|
|
if (mask & IFCAP_LRO)
|
|
ifp->if_capenable ^= IFCAP_LRO;
|
|
|
|
if (mask & IFCAP_VLAN_HWTAGGING)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
|
|
if (mask & IFCAP_VLAN_MTU)
|
|
ifp->if_capenable ^= IFCAP_VLAN_MTU;
|
|
|
|
if (mask & IFCAP_VLAN_HWCSUM)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWCSUM;
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
if (mask & IFCAP_VLAN_HWTSO)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
|
|
#endif
|
|
|
|
#if defined(VLAN_CAPABILITIES)
|
|
VLAN_CAPABILITIES(ifp);
|
|
#endif
|
|
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
break;
|
|
|
|
case SIOCGPRIVATE_0:
|
|
VXGE_DRV_LOCK(vdev);
|
|
err = vxge_ioctl_stats(vdev, ifr);
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
break;
|
|
|
|
case SIOCGPRIVATE_1:
|
|
VXGE_DRV_LOCK(vdev);
|
|
err = vxge_ioctl_regs(vdev, ifr);
|
|
VXGE_DRV_UNLOCK(vdev);
|
|
break;
|
|
|
|
default:
|
|
err = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_ioctl_regs
|
|
* IOCTL to get registers
|
|
*/
|
|
int
|
|
vxge_ioctl_regs(vxge_dev_t *vdev, struct ifreq *ifr)
|
|
{
|
|
u64 value = 0x0;
|
|
u32 vp_id = 0;
|
|
u32 offset, reqd_size = 0;
|
|
int i, err = EINVAL;
|
|
|
|
char *command = (char *) ifr->ifr_data;
|
|
void *reg_info = (void *) ifr->ifr_data;
|
|
|
|
vxge_vpath_t *vpath;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
vxge_hal_mgmt_reg_type_e regs_type;
|
|
|
|
switch (*command) {
|
|
case vxge_hal_mgmt_reg_type_pcicfgmgmt:
|
|
if (vdev->is_privilaged) {
|
|
reqd_size = sizeof(vxge_hal_pcicfgmgmt_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_pcicfgmgmt;
|
|
}
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_mrpcim:
|
|
if (vdev->is_privilaged) {
|
|
reqd_size = sizeof(vxge_hal_mrpcim_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_mrpcim;
|
|
}
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_srpcim:
|
|
if (vdev->is_privilaged) {
|
|
reqd_size = sizeof(vxge_hal_srpcim_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_srpcim;
|
|
}
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_memrepair:
|
|
if (vdev->is_privilaged) {
|
|
/* reqd_size = sizeof(vxge_hal_memrepair_reg_t); */
|
|
regs_type = vxge_hal_mgmt_reg_type_memrepair;
|
|
}
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_legacy:
|
|
reqd_size = sizeof(vxge_hal_legacy_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_legacy;
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_toc:
|
|
reqd_size = sizeof(vxge_hal_toc_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_toc;
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_common:
|
|
reqd_size = sizeof(vxge_hal_common_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_common;
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_vpmgmt:
|
|
reqd_size = sizeof(vxge_hal_vpmgmt_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_vpmgmt;
|
|
vpath = &(vdev->vpaths[*((u32 *) reg_info + 1)]);
|
|
vp_id = vpath->vp_id;
|
|
break;
|
|
|
|
case vxge_hal_mgmt_reg_type_vpath:
|
|
reqd_size = sizeof(vxge_hal_vpath_reg_t);
|
|
regs_type = vxge_hal_mgmt_reg_type_vpath;
|
|
vpath = &(vdev->vpaths[*((u32 *) reg_info + 1)]);
|
|
vp_id = vpath->vp_id;
|
|
break;
|
|
|
|
case VXGE_GET_VPATH_COUNT:
|
|
*((u32 *) reg_info) = vdev->no_of_vpath;
|
|
err = 0;
|
|
break;
|
|
|
|
default:
|
|
reqd_size = 0;
|
|
break;
|
|
}
|
|
|
|
if (reqd_size) {
|
|
for (i = 0, offset = 0; offset < reqd_size;
|
|
i++, offset += 0x0008) {
|
|
value = 0x0;
|
|
status = vxge_hal_mgmt_reg_read(vdev->devh, regs_type,
|
|
vp_id, offset, &value);
|
|
|
|
err = (status != VXGE_HAL_OK) ? EINVAL : 0;
|
|
if (err == EINVAL)
|
|
break;
|
|
|
|
*((u64 *) ((u64 *) reg_info + i)) = value;
|
|
}
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* vxge_ioctl_stats
|
|
* IOCTL to get statistics
|
|
*/
|
|
int
|
|
vxge_ioctl_stats(vxge_dev_t *vdev, struct ifreq *ifr)
|
|
{
|
|
int i, retsize, err = EINVAL;
|
|
u32 bufsize;
|
|
|
|
vxge_vpath_t *vpath;
|
|
vxge_bw_info_t *bw_info;
|
|
vxge_port_info_t *port_info;
|
|
vxge_drv_stats_t *drv_stat;
|
|
|
|
char *buffer = NULL;
|
|
char *command = (char *) ifr->ifr_data;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
switch (*command) {
|
|
case VXGE_GET_PCI_CONF:
|
|
bufsize = VXGE_STATS_BUFFER_SIZE;
|
|
buffer = (char *) vxge_mem_alloc(bufsize);
|
|
if (buffer != NULL) {
|
|
status = vxge_hal_aux_pci_config_read(vdev->devh,
|
|
bufsize, buffer, &retsize);
|
|
if (status == VXGE_HAL_OK)
|
|
err = copyout(buffer, ifr->ifr_data, retsize);
|
|
else
|
|
device_printf(vdev->ndev,
|
|
"failed pciconfig statistics query\n");
|
|
|
|
vxge_mem_free(buffer, bufsize);
|
|
}
|
|
break;
|
|
|
|
case VXGE_GET_MRPCIM_STATS:
|
|
if (!vdev->is_privilaged)
|
|
break;
|
|
|
|
bufsize = VXGE_STATS_BUFFER_SIZE;
|
|
buffer = (char *) vxge_mem_alloc(bufsize);
|
|
if (buffer != NULL) {
|
|
status = vxge_hal_aux_stats_mrpcim_read(vdev->devh,
|
|
bufsize, buffer, &retsize);
|
|
if (status == VXGE_HAL_OK)
|
|
err = copyout(buffer, ifr->ifr_data, retsize);
|
|
else
|
|
device_printf(vdev->ndev,
|
|
"failed mrpcim statistics query\n");
|
|
|
|
vxge_mem_free(buffer, bufsize);
|
|
}
|
|
break;
|
|
|
|
case VXGE_GET_DEVICE_STATS:
|
|
bufsize = VXGE_STATS_BUFFER_SIZE;
|
|
buffer = (char *) vxge_mem_alloc(bufsize);
|
|
if (buffer != NULL) {
|
|
status = vxge_hal_aux_stats_device_read(vdev->devh,
|
|
bufsize, buffer, &retsize);
|
|
if (status == VXGE_HAL_OK)
|
|
err = copyout(buffer, ifr->ifr_data, retsize);
|
|
else
|
|
device_printf(vdev->ndev,
|
|
"failed device statistics query\n");
|
|
|
|
vxge_mem_free(buffer, bufsize);
|
|
}
|
|
break;
|
|
|
|
case VXGE_GET_DEVICE_HWINFO:
|
|
bufsize = sizeof(vxge_device_hw_info_t);
|
|
buffer = (char *) vxge_mem_alloc(bufsize);
|
|
if (buffer != NULL) {
|
|
vxge_os_memcpy(
|
|
&(((vxge_device_hw_info_t *) buffer)->hw_info),
|
|
&vdev->config.hw_info,
|
|
sizeof(vxge_hal_device_hw_info_t));
|
|
|
|
((vxge_device_hw_info_t *) buffer)->port_mode =
|
|
vdev->port_mode;
|
|
|
|
((vxge_device_hw_info_t *) buffer)->port_failure =
|
|
vdev->port_failure;
|
|
|
|
err = copyout(buffer, ifr->ifr_data, bufsize);
|
|
if (err != 0)
|
|
device_printf(vdev->ndev,
|
|
"failed device hardware info query\n");
|
|
|
|
vxge_mem_free(buffer, bufsize);
|
|
}
|
|
break;
|
|
|
|
case VXGE_GET_DRIVER_STATS:
|
|
bufsize = sizeof(vxge_drv_stats_t) * vdev->no_of_vpath;
|
|
drv_stat = (vxge_drv_stats_t *) vxge_mem_alloc(bufsize);
|
|
if (drv_stat != NULL) {
|
|
for (i = 0; i < vdev->no_of_vpath; i++) {
|
|
vpath = &(vdev->vpaths[i]);
|
|
|
|
vpath->driver_stats.rx_lro_queued +=
|
|
vpath->lro.lro_queued;
|
|
|
|
vpath->driver_stats.rx_lro_flushed +=
|
|
vpath->lro.lro_flushed;
|
|
|
|
vxge_os_memcpy(&drv_stat[i],
|
|
&(vpath->driver_stats),
|
|
sizeof(vxge_drv_stats_t));
|
|
}
|
|
|
|
err = copyout(drv_stat, ifr->ifr_data, bufsize);
|
|
if (err != 0)
|
|
device_printf(vdev->ndev,
|
|
"failed driver statistics query\n");
|
|
|
|
vxge_mem_free(drv_stat, bufsize);
|
|
}
|
|
break;
|
|
|
|
case VXGE_GET_BANDWIDTH:
|
|
bw_info = (vxge_bw_info_t *) ifr->ifr_data;
|
|
|
|
if ((vdev->config.hw_info.func_id != 0) &&
|
|
(vdev->hw_fw_version < VXGE_FW_VERSION(1, 8, 0)))
|
|
break;
|
|
|
|
if (vdev->config.hw_info.func_id != 0)
|
|
bw_info->func_id = vdev->config.hw_info.func_id;
|
|
|
|
status = vxge_bw_priority_get(vdev, bw_info);
|
|
if (status != VXGE_HAL_OK)
|
|
break;
|
|
|
|
err = copyout(bw_info, ifr->ifr_data, sizeof(vxge_bw_info_t));
|
|
break;
|
|
|
|
case VXGE_SET_BANDWIDTH:
|
|
if (vdev->is_privilaged)
|
|
err = vxge_bw_priority_set(vdev, ifr);
|
|
break;
|
|
|
|
case VXGE_SET_PORT_MODE:
|
|
if (vdev->is_privilaged) {
|
|
if (vdev->config.hw_info.ports == VXGE_DUAL_PORT_MODE) {
|
|
port_info = (vxge_port_info_t *) ifr->ifr_data;
|
|
vdev->config.port_mode = port_info->port_mode;
|
|
err = vxge_port_mode_update(vdev);
|
|
if (err != ENXIO)
|
|
err = VXGE_HAL_FAIL;
|
|
else {
|
|
err = VXGE_HAL_OK;
|
|
device_printf(vdev->ndev,
|
|
"PLEASE POWER CYCLE THE SYSTEM\n");
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case VXGE_GET_PORT_MODE:
|
|
if (vdev->is_privilaged) {
|
|
if (vdev->config.hw_info.ports == VXGE_DUAL_PORT_MODE) {
|
|
port_info = (vxge_port_info_t *) ifr->ifr_data;
|
|
err = vxge_port_mode_get(vdev, port_info);
|
|
if (err == VXGE_HAL_OK) {
|
|
err = copyout(port_info, ifr->ifr_data,
|
|
sizeof(vxge_port_info_t));
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
int
|
|
vxge_bw_priority_config(vxge_dev_t *vdev)
|
|
{
|
|
u32 i;
|
|
int err = EINVAL;
|
|
|
|
for (i = 0; i < vdev->no_of_func; i++) {
|
|
err = vxge_bw_priority_update(vdev, i, TRUE);
|
|
if (err != 0)
|
|
break;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
int
|
|
vxge_bw_priority_set(vxge_dev_t *vdev, struct ifreq *ifr)
|
|
{
|
|
int err;
|
|
u32 func_id;
|
|
vxge_bw_info_t *bw_info;
|
|
|
|
bw_info = (vxge_bw_info_t *) ifr->ifr_data;
|
|
func_id = bw_info->func_id;
|
|
|
|
vdev->config.bw_info[func_id].priority = bw_info->priority;
|
|
vdev->config.bw_info[func_id].bandwidth = bw_info->bandwidth;
|
|
|
|
err = vxge_bw_priority_update(vdev, func_id, FALSE);
|
|
|
|
return (err);
|
|
}
|
|
|
|
int
|
|
vxge_bw_priority_update(vxge_dev_t *vdev, u32 func_id, bool binit)
|
|
{
|
|
u32 i, set = 0;
|
|
u32 bandwidth, priority, vpath_count;
|
|
u64 vpath_list[VXGE_HAL_MAX_VIRTUAL_PATHS];
|
|
|
|
vxge_hal_device_t *hldev;
|
|
vxge_hal_vp_config_t *vp_config;
|
|
vxge_hal_status_e status = VXGE_HAL_OK;
|
|
|
|
hldev = vdev->devh;
|
|
|
|
status = vxge_hal_get_vpath_list(vdev->devh, func_id,
|
|
vpath_list, &vpath_count);
|
|
|
|
if (status != VXGE_HAL_OK)
|
|
return (status);
|
|
|
|
for (i = 0; i < vpath_count; i++) {
|
|
vp_config = &(hldev->config.vp_config[vpath_list[i]]);
|
|
|
|
/* Configure Bandwidth */
|
|
if (vdev->config.bw_info[func_id].bandwidth !=
|
|
VXGE_HAL_VPATH_BW_LIMIT_DEFAULT) {
|
|
|
|
set = 1;
|
|
bandwidth = vdev->config.bw_info[func_id].bandwidth;
|
|
if (bandwidth < VXGE_HAL_VPATH_BW_LIMIT_MIN ||
|
|
bandwidth > VXGE_HAL_VPATH_BW_LIMIT_MAX) {
|
|
|
|
bandwidth = VXGE_HAL_VPATH_BW_LIMIT_DEFAULT;
|
|
}
|
|
vp_config->bandwidth = bandwidth;
|
|
}
|
|
|
|
/*
|
|
* If b/w limiting is enabled on any of the
|
|
* VFs, then for remaining VFs set the priority to 3
|
|
* and b/w limiting to max i.e 10 Gb)
|
|
*/
|
|
if (vp_config->bandwidth == VXGE_HAL_VPATH_BW_LIMIT_DEFAULT)
|
|
vp_config->bandwidth = VXGE_HAL_VPATH_BW_LIMIT_MAX;
|
|
|
|
if (binit && vdev->config.low_latency) {
|
|
if (func_id == 0)
|
|
vdev->config.bw_info[func_id].priority =
|
|
VXGE_DEFAULT_VPATH_PRIORITY_HIGH;
|
|
}
|
|
|
|
/* Configure Priority */
|
|
if (vdev->config.bw_info[func_id].priority !=
|
|
VXGE_HAL_VPATH_PRIORITY_DEFAULT) {
|
|
|
|
set = 1;
|
|
priority = vdev->config.bw_info[func_id].priority;
|
|
if (priority < VXGE_HAL_VPATH_PRIORITY_MIN ||
|
|
priority > VXGE_HAL_VPATH_PRIORITY_MAX) {
|
|
|
|
priority = VXGE_HAL_VPATH_PRIORITY_DEFAULT;
|
|
}
|
|
vp_config->priority = priority;
|
|
|
|
} else if (vdev->config.low_latency) {
|
|
set = 1;
|
|
vp_config->priority = VXGE_DEFAULT_VPATH_PRIORITY_LOW;
|
|
}
|
|
|
|
if (set == 1) {
|
|
status = vxge_hal_rx_bw_priority_set(vdev->devh,
|
|
vpath_list[i]);
|
|
if (status != VXGE_HAL_OK)
|
|
break;
|
|
|
|
if (vpath_list[i] < VXGE_HAL_TX_BW_VPATH_LIMIT) {
|
|
status = vxge_hal_tx_bw_priority_set(
|
|
vdev->devh, vpath_list[i]);
|
|
if (status != VXGE_HAL_OK)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ((status == VXGE_HAL_OK) ? 0 : EINVAL);
|
|
}
|
|
|
|
/*
|
|
* vxge_intr_coalesce_tx
|
|
* Changes interrupt coalescing if the interrupts are not within a range
|
|
* Return Value: Nothing
|
|
*/
|
|
void
|
|
vxge_intr_coalesce_tx(vxge_vpath_t *vpath)
|
|
{
|
|
u32 timer;
|
|
|
|
if (!vpath->tx_intr_coalesce)
|
|
return;
|
|
|
|
vpath->tx_interrupts++;
|
|
if (ticks > vpath->tx_ticks + hz/100) {
|
|
|
|
vpath->tx_ticks = ticks;
|
|
timer = vpath->tti_rtimer_val;
|
|
if (vpath->tx_interrupts > VXGE_MAX_TX_INTERRUPT_COUNT) {
|
|
if (timer != VXGE_TTI_RTIMER_ADAPT_VAL) {
|
|
vpath->tti_rtimer_val =
|
|
VXGE_TTI_RTIMER_ADAPT_VAL;
|
|
|
|
vxge_hal_vpath_dynamic_tti_rtimer_set(
|
|
vpath->handle, vpath->tti_rtimer_val);
|
|
}
|
|
} else {
|
|
if (timer != 0) {
|
|
vpath->tti_rtimer_val = 0;
|
|
vxge_hal_vpath_dynamic_tti_rtimer_set(
|
|
vpath->handle, vpath->tti_rtimer_val);
|
|
}
|
|
}
|
|
vpath->tx_interrupts = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_intr_coalesce_rx
|
|
* Changes interrupt coalescing if the interrupts are not within a range
|
|
* Return Value: Nothing
|
|
*/
|
|
void
|
|
vxge_intr_coalesce_rx(vxge_vpath_t *vpath)
|
|
{
|
|
u32 timer;
|
|
|
|
if (!vpath->rx_intr_coalesce)
|
|
return;
|
|
|
|
vpath->rx_interrupts++;
|
|
if (ticks > vpath->rx_ticks + hz/100) {
|
|
|
|
vpath->rx_ticks = ticks;
|
|
timer = vpath->rti_rtimer_val;
|
|
|
|
if (vpath->rx_interrupts > VXGE_MAX_RX_INTERRUPT_COUNT) {
|
|
if (timer != VXGE_RTI_RTIMER_ADAPT_VAL) {
|
|
vpath->rti_rtimer_val =
|
|
VXGE_RTI_RTIMER_ADAPT_VAL;
|
|
|
|
vxge_hal_vpath_dynamic_rti_rtimer_set(
|
|
vpath->handle, vpath->rti_rtimer_val);
|
|
}
|
|
} else {
|
|
if (timer != 0) {
|
|
vpath->rti_rtimer_val = 0;
|
|
vxge_hal_vpath_dynamic_rti_rtimer_set(
|
|
vpath->handle, vpath->rti_rtimer_val);
|
|
}
|
|
}
|
|
vpath->rx_interrupts = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vxge_methods FreeBSD device interface entry points
|
|
*/
|
|
static device_method_t vxge_methods[] = {
|
|
DEVMETHOD(device_probe, vxge_probe),
|
|
DEVMETHOD(device_attach, vxge_attach),
|
|
DEVMETHOD(device_detach, vxge_detach),
|
|
DEVMETHOD(device_shutdown, vxge_shutdown),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t vxge_driver = {
|
|
"vxge", vxge_methods, sizeof(vxge_dev_t),
|
|
};
|
|
|
|
static devclass_t vxge_devclass;
|
|
|
|
DRIVER_MODULE(vxge, pci, vxge_driver, vxge_devclass, 0, 0);
|