mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
50b8d1cce4
preparation for tsunami support. Previous chipsets' direct-mapped DMA mask was always 1024*1024*1024. The Tsunami chipset needs it to be 2*1024*1024*1024 These changes should not affect the i386 port Reviewed by: Doug Rabson <dfr@nlsystems.com>
378 lines
11 KiB
C
378 lines
11 KiB
C
/*-
|
|
* Copyright (c) 1998,1999 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: ata-dma.c,v 1.7 1999/05/17 15:58:45 sos Exp $
|
|
*/
|
|
|
|
#include "ata.h"
|
|
#include "pci.h"
|
|
#if NATA > 0
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/bus.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#if NPCI > 0
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
#endif
|
|
#include <dev/ata/ata-all.h>
|
|
|
|
#ifdef __alpha__
|
|
#undef vtophys
|
|
#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)va)
|
|
#endif
|
|
|
|
/* misc defines */
|
|
#define MIN(a,b) ((a)>(b)?(b):(a))
|
|
|
|
#if NPCI > 0
|
|
|
|
int32_t
|
|
ata_dmainit(struct ata_softc *scp, int32_t device,
|
|
int32_t apiomode, int32_t wdmamode, int32_t udmamode)
|
|
{
|
|
int32_t type, devno, error;
|
|
void *dmatab;
|
|
|
|
if (!scp->bmaddr)
|
|
return -1;
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("ata%d: dmainit: ioaddr=0x%x altioaddr=0x%x, bmaddr=0x%x\n",
|
|
scp->lun, scp->ioaddr, scp->altioaddr, scp->bmaddr);
|
|
#endif
|
|
|
|
if (!(dmatab = malloc(PAGE_SIZE, M_DEVBUF, M_NOWAIT)))
|
|
return -1;
|
|
|
|
if (((uintptr_t)dmatab >> PAGE_SHIFT) ^
|
|
(((uintptr_t)dmatab + PAGE_SIZE - 1) >> PAGE_SHIFT)) {
|
|
printf("ata_dmainit: dmatab crosses page boundary, no DMA\n");
|
|
free(dmatab, M_DEVBUF);
|
|
return -1;
|
|
}
|
|
scp->dmatab[device ? 1 : 0] = dmatab;
|
|
|
|
type = pci_get_devid(scp->dev);
|
|
|
|
switch(type) {
|
|
|
|
case 0x71118086: /* Intel PIIX4 */
|
|
if (udmamode >= 2) {
|
|
int32_t mask48, new48;
|
|
|
|
printf("ata%d: %s: setting up UDMA2 mode on PIIX4 chip ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_UDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
devno = (scp->unit << 1) + (device ? 1 : 0);
|
|
mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
|
|
new48 = (1 << devno) + (2 << (16 + (devno << 2)));
|
|
pci_write_config(scp->dev, 0x48,
|
|
(pci_read_config(scp->dev, 0x48, 4) &
|
|
~mask48) | new48, 4);
|
|
return 0;
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
case 0x70108086: /* Intel PIIX3 */
|
|
if (wdmamode >= 2 && apiomode >= 4) {
|
|
int32_t mask40, new40, mask44, new44;
|
|
|
|
/* if SITRE not set doit for both channels */
|
|
if (!((pci_read_config(scp->dev, 0x40, 4)>>(scp->unit<<8))&0x4000)){
|
|
new40 = pci_read_config(scp->dev, 0x40, 4);
|
|
new44 = pci_read_config(scp->dev, 0x44, 4);
|
|
if (!(new40 & 0x00004000)) {
|
|
new44 &= ~0x0000000f;
|
|
new44 |= ((new40&0x00003000)>>10)|((new40&0x00000300)>>8);
|
|
}
|
|
if (!(new40 & 0x40000000)) {
|
|
new44 &= ~0x000000f0;
|
|
new44 |= ((new40&0x30000000)>>22)|((new40&0x03000000)>>20);
|
|
}
|
|
new40 |= 0x40004000;
|
|
pci_write_config(scp->dev, 0x40, new40, 4);
|
|
pci_write_config(scp->dev, 0x44, new44, 4);
|
|
}
|
|
printf("ata%d: %s: setting up WDMA2 mode on PIIX3/4 chip ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_WDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
if (device == ATA_MASTER) {
|
|
mask40 = 0x0000330f;
|
|
new40 = 0x00002307;
|
|
mask44 = 0;
|
|
new44 = 0;
|
|
} else {
|
|
mask40 = 0x000000f0;
|
|
new40 = 0x00000070;
|
|
mask44 = 0x0000000f;
|
|
new44 = 0x0000000b;
|
|
}
|
|
if (scp->unit) {
|
|
mask40 <<= 16;
|
|
new40 <<= 16;
|
|
mask44 <<= 4;
|
|
new44 <<= 4;
|
|
}
|
|
pci_write_config(scp->dev, 0x40,
|
|
(pci_read_config(scp->dev, 0x40, 4) &
|
|
~mask40) | new40, 4);
|
|
pci_write_config(scp->dev, 0x44,
|
|
(pci_read_config(scp->dev, 0x44, 4) &
|
|
~mask44) | new44, 4);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case 0x12308086: /* Intel PIIX */
|
|
/* probably not worth the trouble */
|
|
break;
|
|
|
|
case 0x4d33105a: /* Promise Ultra/33 / FastTrack controllers */
|
|
devno = (scp->unit << 1) + (device ? 1 : 0);
|
|
if (udmamode >=2) {
|
|
printf("ata%d: %s: setting up UDMA2 mode on Promise chip ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_UDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
pci_write_config(scp->dev, 0x60 + (devno << 2), 0x004127f3, 4);
|
|
return 0;
|
|
}
|
|
else if (wdmamode >= 2 && apiomode >= 4) {
|
|
printf("ata%d: %s: setting up WDMA2 mode on Promise chip ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_WDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
pci_write_config(scp->dev, 0x60 + (devno << 2), 0x004367f3, 4);
|
|
return 0;
|
|
}
|
|
else {
|
|
printf("ata%d: %s: setting up PIO mode on Promise chip OK\n",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
pci_write_config(scp->dev, 0x60 + (devno << 2), 0x004fe924, 4);
|
|
}
|
|
break;
|
|
|
|
case 0x522910b9: /* AcerLabs Aladdin IV/V */
|
|
if (udmamode >=2) {
|
|
int32_t word54 = pci_read_config(scp->dev, 0x54, 4);
|
|
|
|
printf("ata%d: %s: setting up UDMA2 mode on Aladdin chip ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_UDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
word54 |= 0x5555;
|
|
word54 |= (0x0000000A << (16 + (scp->unit << 3) + (device << 2)));
|
|
pci_write_config(scp->dev, 0x54, word54, 4);
|
|
return 0;
|
|
|
|
}
|
|
else if (wdmamode >= 2 && apiomode >= 4) {
|
|
printf("ata%d: %s: setting up WDMA2 mode on Aladdin chip ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_WDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
default: /* well, we have no support for this, but try anyways */
|
|
if ((wdmamode >= 2 && apiomode >= 4) || udmamode >= 2) {
|
|
printf("ata%d: %s: setting up generic WDMA2 mode ",
|
|
scp->lun, (device) ? "slave" : "master");
|
|
error = ata_command(scp, device, ATA_C_SETFEATURES, 0, 0, 0,
|
|
ATA_WDMA2, ATA_C_FEA_SETXFER, ATA_WAIT_INTR);
|
|
if (error) {
|
|
printf("failed\n");
|
|
break;
|
|
}
|
|
printf("OK\n");
|
|
return 0;
|
|
}
|
|
}
|
|
free(dmatab, M_DEVBUF);
|
|
return -1;
|
|
}
|
|
|
|
int32_t
|
|
ata_dmasetup(struct ata_softc *scp, int32_t device,
|
|
int8_t *data, int32_t count, int32_t flags)
|
|
{
|
|
struct ata_dmaentry *dmatab;
|
|
u_int32_t dma_count, dma_base;
|
|
int32_t i = 0;
|
|
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("ata%d: dmasetup\n", scp->lun);
|
|
#endif
|
|
if (((uintptr_t)data & 1) || (count & 1))
|
|
return -1;
|
|
|
|
if (!count) {
|
|
printf("ata%d: zero length DMA transfer attempt on %s\n",
|
|
scp->lun, (device ? "slave" : "master"));
|
|
return -1;
|
|
}
|
|
|
|
dmatab = scp->dmatab[device ? 1 : 0];
|
|
dma_base = vtophys(data);
|
|
dma_count = MIN(count, (PAGE_SIZE - ((uintptr_t)data & PAGE_MASK)));
|
|
data += dma_count;
|
|
count -= dma_count;
|
|
|
|
while (count) {
|
|
dmatab[i].base = dma_base;
|
|
dmatab[i].count = (dma_count & 0xffff);
|
|
i++;
|
|
if (i >= ATA_DMA_ENTRIES) {
|
|
printf("ata%d: too many segments in DMA table for %s\n",
|
|
scp->lun, (device ? "slave" : "master"));
|
|
return -1;
|
|
}
|
|
dma_base = vtophys(data);
|
|
dma_count = MIN(count, PAGE_SIZE);
|
|
data += MIN(count, PAGE_SIZE);
|
|
count -= MIN(count, PAGE_SIZE);
|
|
}
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("ata_dmasetup: base=%08x count%08x\n",
|
|
dma_base, dma_count);
|
|
#endif
|
|
dmatab[i].base = dma_base;
|
|
dmatab[i].count = (dma_count & 0xffff) | ATA_DMA_EOT;
|
|
|
|
outl(scp->bmaddr + ATA_BMDTP_PORT, vtophys(dmatab));
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("dmatab=%08x %08x\n", vtophys(dmatab), inl(scp->bmaddr+ATA_BMDTP_PORT));
|
|
#endif
|
|
outb(scp->bmaddr + ATA_BMCMD_PORT, flags ? ATA_BMCMD_WRITE_READ:0);
|
|
outb(scp->bmaddr + ATA_BMSTAT_PORT, (inb(scp->bmaddr + ATA_BMSTAT_PORT) |
|
|
(ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR)));
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
ata_dmastart(struct ata_softc *scp, int32_t device)
|
|
{
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("ata%d: dmastart\n", scp->lun);
|
|
#endif
|
|
outb(scp->bmaddr + ATA_BMCMD_PORT,
|
|
inb(scp->bmaddr + ATA_BMCMD_PORT) | ATA_BMCMD_START_STOP);
|
|
}
|
|
|
|
int32_t
|
|
ata_dmadone(struct ata_softc *scp, int32_t device)
|
|
{
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("ata%d: dmadone\n", scp->lun);
|
|
#endif
|
|
outb(scp->bmaddr + ATA_BMCMD_PORT,
|
|
inb(scp->bmaddr + ATA_BMCMD_PORT) & ~ATA_BMCMD_START_STOP);
|
|
return inb(scp->bmaddr + ATA_BMSTAT_PORT) & ATA_BMSTAT_MASK;
|
|
}
|
|
|
|
int32_t
|
|
ata_dmastatus(struct ata_softc *scp, int32_t device)
|
|
{
|
|
#ifdef ATA_DEBUGDMA
|
|
printf("ata%d: dmastatus\n", scp->lun);
|
|
#endif
|
|
return inb(scp->bmaddr + ATA_BMSTAT_PORT) & ATA_BMSTAT_MASK;
|
|
}
|
|
|
|
#else /* NPCI > 0 */
|
|
|
|
int32_t
|
|
ata_dmainit(struct ata_softc *scp, int32_t device,
|
|
int32_t piomode, int32_t wdmamode, int32_t udmamode)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int32_t
|
|
ata_dmasetup(struct ata_softc *scp, int32_t device,
|
|
int8_t *data, int32_t count, int32_t flags)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
void
|
|
ata_dmastart(struct ata_softc *scp, int32_t device)
|
|
{
|
|
}
|
|
|
|
int32_t
|
|
ata_dmadone(struct ata_softc *scp, int32_t device)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
int32_t
|
|
ata_dmastatus(struct ata_softc *scp, int32_t device)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
#endif /* NPCI > 0 */
|
|
#endif /* NATA > 0 */
|