mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-16 10:20:30 +00:00
Code Issues Releases Activity
2705b229fc
freebsd/usr.sbin/pppd/RELNOTES
Peter Wemm 2646609bb7 ppp-2.2 doesn't have a RELNOTES file anymore, so the old one here was 
rather out of date.. it even suggested that it was ppp-2.1.1 still :-)

I've selected some bits from the README files and pre-pended it so that
at least reading it tells you _something_ about the recent history.
1995-11-10 21:39:32 +00:00

443 lines
18 KiB
Plaintext
Raw Blame History

This is the README file for ppp-2.2, a package which implements the
Point-to-Point Protocol (PPP) to provide Internet connections over
serial lines.
Introduction.
*************
The Point-to-Point Protocol (PPP) provides a standard way to transmit
datagrams over a serial link, as well as a standard way for the
machines at either end of the link (the `peers') to negotiate various
optional characteristics of the link. Using PPP, a serial link can be
used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP
connections between the peers. PPP is defined in several RFC (Request
For Comments) documents, in particular RFCs 1661, 1662, 1332 and 1334.
Other RFCs describe standard ways to transmit datagrams from other
network protocols (e.g., DECnet, OSI, Appletalk), but this package
only supports IP.
This software consists of two parts:
- Kernel code, which establishes a network interface and passes
packets between the serial port, the kernel networking code and the
PPP daemon (pppd). This code is implemented using STREAMS modules on
SunOS 4.x, AIX 4.1 and OSF/1, and as a line discipline under Ultrix,
NextStep, NetBSD, FreeBSD, and Linux.
- The PPP daemon (pppd), which negotiates with the peer to establish
the link and sets up the ppp network interface. Pppd includes support
for authentication, so you can control which other systems may make a
PPP connection and what IP addresses they may use.
What is new in ppp-2.2.
***********************
* More systems are now supported:
AIX 4, thanks to Charlie Wick,
OSF/1 on DEC Alpha, thanks to Steve Tate (srt@zaphod.csci.unt.edu),
NextStep 3.2 and 3.3, thanks to Philip-Andrew Prindeville
(philipp@res.enst.fr) and Steve Perkins (perkins@cps.msu.edu),
Solaris 2,
in addition to NetBSD 1.0, SunOS 4.x, Ultrix 4.x, FreeBSD 2.0, and
Linux.
* Packet compression has been implemented. This version implements
CCP (Compression Control Protocol) and the BSD-Compress compression
scheme according to the current draft RFCs. This means that incoming
and outgoing packets can be compressed with the LZW scheme (same as
the `compress' command) using a code size of up to 15 bits.
* Some bug fixes to the LCP protocol code. In particular, pppd now
correctly replies with a Configure-NAK (instead of a Configure-Reject)
if the peer asks for CHAP and pppd is willing to do PAP but not CHAP.
* The ip-up and ip-down scripts are now run with the real user ID set
to root, and with an empty environment. Clearing the environment
fixes a security hole.
* The kernel code on NetBSD, FreeBSD, NextStep and Ultrix has been
restructured to make it easier to implement PPP over devices other
than asynchronous tty ports (for example, synchronous serial ports).
* pppd now looks at the list of interfaces in the system to determine
what the netmask should be. In most cases, this should eliminate the
need to use the `netmask' option.
* There is a new `papcrypt' option to pppd, which specifies that
secrets in /etc/ppp/pap-secrets used for authenticating the peer are
encrypted, so pppd always encrypts the peer's password before
comparing it with the secret from /etc/ppp/pap-secrets. This gives
better security.
Patents.
********
The BSD-Compress algorithm used for packet compression is the same as
that used in the Unix "compress" command. It is apparently covered by
U.S. patents 4,814,746 (owned by IBM) and 4,558,302 (owned by Unisys),
and corresponding patents in various other countries (but not
Australia). If this is of concern, you can build the package without
including BSD-Compress. To do this, edit net/ppp-comp.h to change the
definition of DO_BSD_COMPRESS to 0. The bsd-comp.c files are then no
longer needed, so the references to bsd-comp.o may optionally be
removed from the Makefiles.
Contacts.
*********
Bugs in the the SunOS, NetBSD and Ultrix ports and bugs in pppd, chat
or pppstats should be reported to:
paulus@cs.anu.edu.au
Paul Mackerras
Dept. of Computer Science
Australian National University
Canberra ACT 0200
AUSTRALIA
Bugs in other ports should be reported to the maintainer for that port
(see the appropriate README.* file) or to the above. Unfortunately,
Charlie Wick is not in a position to provide support for the AIX 4
port, so if you find bugs in it, send them to me.
Thanks to:
Brad Parker (brad@fcr.com)
Greg Christy (gmc@quotron.com)
Drew D. Perkins (ddp@andrew.cmu.edu)
Rick Adams (rick@seismo.ARPA)
Chris Torek (chris@mimsy.umd.edu, umcp-cs!chris).
Copyrights:
Most of the code can be freely used and redistributed. The STREAMS
code for SunOS 4.x, OSF/1 and AIX 4 is under a more restrictive
copyright:
This code is Copyright (C) 1989, 1990 By Brad K. Clements,
All Rights Reserved.
You may use this code for your personal use, to provide a non-profit
service to others, or to use as a test platform for a commercial
implementation.
You may NOT use this code in a commercial product, nor to provide a
commercial service, nor may you sell this code without express
written permission of the author.
Otherwise, Enjoy!
This copyright applies to (parts of) the following files:
sunos/ppp_async.c
sunos/ppp_if.c
aix4/ppp_async.c
aix4/ppp_if.c
net/ppp_str.h
pppd/sys-str.c
pppd/sys-osf.c
pppd/sys-aix4.c
-------------------------
pppd-2.1.1 release notes
Paul Mackerras 27 May 1994
This file details the new and changed features in pppd since version 1.3.
Briefly:
- the protocol code has been updated to conform with
RFCs 1548, 1549, 1332 and 1334
- security has been improved
- functionality has been improved in various ways.
NEW FEATURES
* The option negotiation automaton has been updated to RFC1548. LCP
now rejects the Quality Protocol option, since LQR is not implemented
yet. IPCP now uses the IP-Address option, and falls back to the old
IP-Addresses option if the IP-Address option is rejected. IPCP also
uses the new form of the VJ-Compression option.
RFC1548 defines the "passive" option to mean that the automaton
outputs configure-request packets initially, but does not close down
if no answer is received. A valid configure-request received will
restart the negotiation. The "silent" option has been added with the
old meaning of "passive", i.e. the automaton will not output
configure-requests until it receives a valid one from the peer.
* More systems are supported: in addition to SunOS 4.x and BSD/Net-2
derived systems, Ultrix and Linux are supported, thanks to Robert
Olsson, Per Sundstrom, Michael Callahan and Al Longyear.
* Options can be taken from files as well as the command line. pppd
reads options from the files /etc/ppp/options and ~/.ppprc before
looking at the command line, and /etc/ppp/options.<ttyname> after
interpreting the options on the command line. An options file is
parsed into a series of words, delimited by whitespace. Whitespace
can be included in a word by enclosing the word in quotes (").
Backslash (\) quotes the following character. A hash (#) starts a
comment, which continues until the end of the line. In addition, the
`file' option causes pppd to read options from a file. pppd will
report and error and exit if ~/.ppprc or the file given as the
argument to the `file' option cannot be read by the user who invoked
pppd.
* On those systems, such as NetBSD, where the serial line speed is
stored in the termios structure in bits per second (i.e. B9600 ==
9600), it is possible to set any speed.
* If desired, pppd will output LCP echo-request frames periodically
while the link is up, and take the link down if no replies are
received to a user-configurable number of echo-requests. This can be
used to detect that the serial connection has been broken on those
systems which don't have hardware modem control lines.
AUTHENTICATION
Previous versions of pppd have provided no control over which IP
addresses the peer can use. Thus it is possible for the peer to
impersonate another host on the local network, leading to various
security holes. In addition, the authentication mechanisms were quite
weak: if the peer refused to agree to authenticate, pppd would print a
warning message but still allow the link to come up. The CHAP
implementation also appeared to be quite broken (has anybody actually
used it?).
This new version of pppd addresses these problems. My aim has been to
provide system administrators with sufficient access control that PPP
access to a server machine can be provided to legitimate users without
fear of compromising the security of the server or the network it's
on. In part this is provided by the /etc/ppp/options file, where the
administrator can place options to require authentication which cannot
be disabled by users. Thus the new pppd can made setuid-root and run
by users.
The behaviour where pppd refuses to run unless the /etc/ppp/options
file is present and readable by pppd is now the default behaviour. If
you really want pppd to run without the presence of the
/etc/ppp/options file, you will have to include -DREQ_SYSOPTIONS=0 on
the compilation command line.
The options related to authentication are:
auth Require authentication from the peer. If neither
+chap or +pap is also given, either CHAP or PAP
authentication will be accepted.
+chap Require CHAP authentication from the peer.
+pap Require PAP authentication from the peer.
-chap Don't agree to authenticate ourselves with the peer
using CHAP.
-pap Don't agree to authenticate ourselves using PAP.
+ua <f> Get username and password for authenticating ourselves
with the peer using PAP from file <f>.
name <n> Use <n> as the local name for authentication.
usehostname Use this machine's hostname as the local name for
authentication.
remotename <n> Use <n> as the name of the peer for authentication.
login If the peer authenticates using PAP, check the
supplied username and password against the system
password database, and make a wtmp entry.
user <n> Use <n> as the username for authenticating ourselves
using PAP.
The defaults are to agree to authenticate if requested, and to not
require authentication from the peer. However, pppd will not agree to
authenticate itself with a particular protocol if it has no secrets
which could be used to do so.
Authentication is based on secrets, which are selected from secrets
files (/etc/ppp/pap-secrets for PAP, /etc/ppp/chap-secrets for CHAP).
Both secrets files have the same format, and both can store secrets
for several combinations of server (authenticating peer) and client
(peer being authenticated). Note that each end can be both a server
and client, and that different protocols can be used in the two
directions if desired.
A secrets file is parsed into words as for a options file. A secret
is specified by a line containing at least 3 words, in the order
client, server, secret. Any following words on the same line are
taken to be a list of acceptable IP addresses for that client. If
there are only 3 words on the line, it is assumed that any IP address
is OK; to disallow all IP addresses, use "-". If the secret starts
with an `@', what follows is assumed to be the name of a file from
which to read the secret. A "*" as the client or server name matches
any name. When selecting a secret, pppd takes the best match, i.e.
the match with the fewest wildcards.
Thus a secrets file contains both secrets for use in authenticating
other hosts, plus secrets which we use for authenticating ourselves to
others. Which secret to use is chosen based on the names of the host
(the `local name') and its peer (the `remote name'). The local name
is set as follows:
if the `usehostname' option is given,
then the local name is the hostname of this machine
(with the domain appended, if given)
else if the `name' option is given,
then use the argument of the first `name' option seen
else if the local IP address is specified with a
host name (e.g. `sirius:')
then use that host name
else use the hostname of this machine
(with the domain appended, if given)
When authenticating ourselves using PAP, there is also a `username'
which is the local name by default, but can be set with the `user'
option or the `+ua' option.
The remote name is set as follows:
if the `remotename' option is given,
then use the argument of the last `remotename' option seen
else if the remote IP address is specified with a
host name (e.g. `avago:')
then use that host name
else the remote name is the null string "".
Secrets are selected from the PAP secrets file as follows:
- For authenticating the peer, look for a secret with client ==
username specified in the PAP authenticate-request, and server ==
local name.
- For authenticating ourselves to the peer, look for a secret with
client == our username, server == remote name.
When authenticating the peer with PAP, a secret of "" matches any
password supplied by the peer. If the password doesn't match the
secret, the password is encrypted using crypt() and checked against
the secret again; thus secrets for authenticating the peer can be
stored in encrypted form. If the `login' option was specified, the
username and password are also checked against the system password
database. Thus, the system administrator can set up the pap-secrets
file to allow PPP access only to certain users, and to restrict the
set of IP addresses that each user can use.
Secrets are selected from the CHAP secrets file as follows:
- For authenticating the peer, look for a secret with client == name
specified in the CHAP-Response message, and server == local name.
- For authenticating ourselves to the peer, look for a secret with
client == local name, and server == name specified in the
CHAP-Challenge message.
Authentication must be satisfactorily completed before IPCP (or any
other Network Control Protocol) can be started. If authentication
fails, pppd will terminated the link (by closing LCP). If IPCP
negotiates an unacceptable IP address for the remote host, IPCP will
be closed. IP packets cannot be sent or received until IPCP is
successfully opened.
(some examples needed here perhaps)
ROUTING
Setting the addresses on a ppp interface is sufficient to create a
host route to the remote end of the link. Sometimes it is desirable
to add a default route through the remote host, as in the case of a
machine whose only connection to the Internet is through the ppp
interface. The `defaultroute' option causes pppd to create such a
default route when IPCP comes up, and delete it when the link is
terminated.
In some cases it is desirable to use proxy ARP, for example on a
server machine connected to a LAN, in order to allow other hosts to
communicate with the remote host. The `proxyarp' option causes pppd
to look for a network interface (an interface supporting broadcast and
ARP, which is up and not a point-to-point or loopback interface) on
the same subnet as the remote host. If found, pppd creates a
permanent, published ARP entry with the IP address of the remote host
and the hardware address of the network interface found.
OTHER NEW AND CHANGED OPTIONS
modem Use modem control lines (not fully implemented
yet)
local Don't use modem control lines
persist Keep reopening connection (not fully
implemented yet)
lcp-restart <n> Set timeout for LCP retransmissions to <n>
seconds (default 3 seconds)
lcp-max-terminate <n> Set maximum number of LCP terminate-request
transmissions (default 2)
lcp-max-configure <n> Set maximum number of LCP configure-request
transmissions (default 10)
lcp-max-failure <n> Set maximum number of LCP configure-Naks sent
before converting to configure-rejects
(default 10)
ipcp-restart <n> Set timeout for IPCP retransmissions to <n>
seconds (default 3 seconds)
ipcp-max-terminate <n> Set maximum number of IPCP
terminate-request transmissions (default 2)
ipcp-max-configure <n> Set maximum number of IPCP
configure-request transmissions (default 10)
ipcp-max-failure <n> Set maximum number of IPCP configure-Naks
sent before converting to configure-rejects
(default 10)
upap-restart <n> Set timeout for PAP retransmissions to
<n> seconds (default 3 seconds)
upap-max-authreq <n> Set maximum number of Authenticate-request
retransmissions (default 10)
chap-restart <n> Set timeout for CHAP retransmissions to
<n> seconds (default 3 seconds)
chap-max-challenge <n> Set maximum number of CHAP Challenge
retransmissions (default 10)
chap-interval <n> Set the interval between CHAP rechallenges
(default 0, meaning infinity)
The -ua option no longer exists.
SOFTWARE RESTRUCTURING
Many of the source files for pppd have changed significantly from
ppp-1.3, upon which it is based. In particular:
- the macros for system-dependent operations in pppd.h have mostly
been removed. Instead these operations are performed by procedures in
sys-bsd.c (for BSD-4.4ish systems like NetBSD, 386BSD, etc.) or
sys-str.c (for SunOS-based systems using STREAMS). (I got sick of
having to recompile everything every time I wanted to change one of
those horrible macros.)
- most of the system-dependent code in main.c has also been removed to
sys-bsd.c and sys-str.c.
- the option processing code in main.c has been removed to options.c.
- the authentication code in main.c has been removed to auth.c, which
also contains substantial amounts of new code.
- fsm.c has changed significantly, and lcp.c, ipcp.c, and upap.c have
changed somewhat. chap.c has also changed significantly.
STILL TO DO
* sort out appropriate modem control and implement the persist option
properly; add an `answer' option for auto-answering a modem.
* add an inactivity timeout and demand dialing.
* implement link quality monitoring.
* implement other network control protocols.
Reference in New Issue View Git Blame Copy Permalink