1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00
freebsd/sys/dev/usb
Ian Dowse 688514ced0 If the device goes away during ulpt_reset(), make sure not to call
ulpt_status() afterwards. This fixes a crash that can occur if a
USB printer is power-cycled when printing is just starting. The
problem is similar to that fixed in revision 1.33, but it is much
less likely to occur.

MFC after:	1 week
2003-06-15 11:55:50 +00:00
..
devlist2h.awk
dsbr100io.h
ehci_pci.c Enable bus mastering in the attach routine. This appears to fix the 2003-06-12 05:29:15 +00:00
ehci.c add EHCI (USB 2.0) controller support. 2003-04-14 14:04:08 +00:00
ehcireg.h add EHCI (USB 2.0) controller support. 2003-04-14 14:04:08 +00:00
ehcivar.h add EHCI (USB 2.0) controller support. 2003-04-14 14:04:08 +00:00
FILES add EHCI (USB 2.0) controller support. 2003-04-14 14:04:08 +00:00
hid.c Back out M_* changes, per decision of the TRB. 2003-02-19 05:47:46 +00:00
hid.h
if_aue.c - Express hard dependencies on bus (pci, isa, pccard) and 2003-04-15 06:37:30 +00:00
if_auereg.h network interface driver changes: 2002-11-14 23:54:55 +00:00
if_axe.c Add another product ID for if_axe and correct vendor ID description 2003-04-21 17:34:13 +00:00
if_axereg.h Add device driver support for the ASIX Electronics AX88172 USB 2.0 2003-04-20 19:05:33 +00:00
if_cue.c Fix indentation. 2003-05-31 19:02:20 +00:00
if_cuereg.h network interface driver changes: 2002-11-14 23:54:55 +00:00
if_kue.c - Express hard dependencies on bus (pci, isa, pccard) and 2003-04-15 06:37:30 +00:00
if_kuereg.h network interface driver changes: 2002-11-14 23:54:55 +00:00
if_rue.c Add RealTek RTL8150 USB to fast Ethernet controller driver. 2003-05-03 10:16:56 +00:00
if_ruereg.h Add RealTek RTL8150 USB to fast Ethernet controller driver. 2003-05-03 10:16:56 +00:00
kue_fw.h
Makefile.usbdevs
ohci_pci.c Enable bus mastering in the attach routine. This appears to fix the 2003-06-12 05:29:15 +00:00
ohci.c Fixed an issue which transfer no packets in combination with aue driver. 2003-03-05 13:17:15 +00:00
ohcireg.h
ohcivar.h In rev 1.51 of usb_port.h I switched over to using the USB_USE_SOFTINTR 2002-09-30 17:50:18 +00:00
rio500_usb.h
ubsa.c Back out M_* changes, per decision of the TRB. 2003-02-19 05:47:46 +00:00
ucom.c Fix page fault with FTDI's USB serial device. 2003-03-09 11:33:26 +00:00
ucomvar.h
udbp.c Add module dependency. This makes udbp.ko to be loaded. 2003-03-15 13:03:30 +00:00
udbp.h
ufm.c Gigacommit to improve device-driver source compatibility between 2003-03-03 12:15:54 +00:00
uftdi.c Fix duplicate sc_dying usage. 2003-03-09 11:19:18 +00:00
uftdireg.h
ugen.c Correct the fix in rev 1.70 2003-05-29 23:47:12 +00:00
ugraphire_rdesc.h
uhci_pci.c Enable bus mastering in the attach routine. This appears to fix the 2003-06-12 05:29:15 +00:00
uhci.c Make uhci_waitintr() robust to interrupts being enabled, even though 2003-03-11 09:12:55 +00:00
uhcireg.h
uhcivar.h In rev 1.51 of usb_port.h I switched over to using the USB_USE_SOFTINTR 2002-09-30 17:50:18 +00:00
uhid.c At least pretend to handle USB_GET_REPORT_ID. 2003-04-09 08:43:01 +00:00
uhub.c
ukbd.c Deprecate machine/limits.h in favor of new sys/limits.h. 2003-04-29 13:36:06 +00:00
ulpt.c If the device goes away during ulpt_reset(), make sure not to call 2003-06-15 11:55:50 +00:00
umass.c Merge common XPT_CALC_GEOMETRY functions into a single convenience function. 2003-06-14 22:40:08 +00:00
umodem.c Fix duplicate sc_dying usage. 2003-03-09 11:19:18 +00:00
ums.c Gigacommit to improve device-driver source compatibility between 2003-03-03 12:15:54 +00:00
uplcom.c Back out M_* changes, per decision of the TRB. 2003-02-19 05:47:46 +00:00
urio.c Gigacommit to improve device-driver source compatibility between 2003-03-03 12:15:54 +00:00
usb_ethersubr.c Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
usb_ethersubr.h Update netisr handling; Each SWI now registers its queue, and all queue 2003-03-04 23:19:55 +00:00
usb_if.m
usb_mem.h
usb_port.h Don't define memcpy() to bcopy() and in particular not memset() to 2003-05-31 19:38:43 +00:00
usb_quirks.c Add quirk for LOGITECH WMRPAD. 2003-04-10 08:25:09 +00:00
usb_quirks.h
usb_subr.c Some USB devices are not prepared to deal with a single byte string 2003-01-14 23:07:43 +00:00
usb.c add EHCI (USB 2.0) controller support. 2003-04-14 14:04:08 +00:00
usb.h Packed structures are defined differently in older gcc's, like the one 2002-11-06 21:37:21 +00:00
usbcdc.h Merge from NetBSD and arrange for FreeBSD's slight differences in 2003-01-09 04:24:28 +00:00
usbdevs Allow the EPSON USB scanner 1250 to be recognised as a uscanner device. 2003-06-13 11:20:26 +00:00
usbdevs_data.h Regen. 2003-06-13 11:24:45 +00:00
usbdevs.h Regen. 2003-06-13 11:24:45 +00:00
usbdi_util.c More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
usbdi_util.h Implement outgoing interrupt pipes. It is part of the USB 1.1 spec. 2003-02-28 19:28:29 +00:00
usbdi.c
usbdi.h
usbdivar.h
usbhid.h
uscanner.c Allow the EPSON USB scanner 1250 to be recognised as a uscanner device. 2003-06-13 11:20:26 +00:00
uvisor.c Add support for the CLIE 5.0 series of PDAs 2003-04-06 17:34:50 +00:00
uvscom.c Fix device freeze to reduce output packet size. 2003-03-09 11:50:27 +00:00