1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-27 11:55:06 +00:00
freebsd/etc/ppp/ppp.conf.sample
Paul Richards 9c57aa7fca Added ocol: ppp to the first two examples so that ppp catually requests
the ppp protocol when it logs in. I'm not sure whether this applies to all
the examples. Are there cases where the ISP assumes ppp is being used ?
1996-11-11 17:27:25 +00:00

133 lines
3.6 KiB
Plaintext

#################################################################
#
# PPP Sample Configuration File
#
# Written by Toshiharu OHNO
#
# $Id: ppp.conf.sample,v 1.5 1996/03/08 09:39:43 ache Exp $
#
#################################################################
#
# Default setup. Executed always when PPP is invoked.
#
default:
set device /dev/cuaa1
set speed 38400
disable lqr
deny lqr
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
#
# Example with login script
# o From PPP prompt,
# ppp> dial simplesite
# will automatically dials and perform login procedure.
#
# ppp> load simplesite
# will also load and execute commands, but don't dial.
#
# o From shell, invoke as
# % ppp simplesite
# will load commands associated with the label. Use,
# ppp> dial
# to establish the connection.
#
simplesite:
set phone 12345678
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp"
set timeout 120
#
# Multi-phone example
#
multiphone:
set phone 12345678:12345679:12345670:12345671
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp"
#
# If peer requires to use CHAP, don't forget to supply authname and authkey.
#
# If you'd like to use CHAP to authentication peer, comment out the line
# ``enable chap'' below. You also need to prepare /etc/ppp.secret.
#
# If remote system sends its system name within CHAP packet and it is
# found in /etc/ppp.secret, then secret key is taken from the file and
# value of authkey is ignored.
#
chapsite:
set phone 12345678
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
deny pap
accept chap
# enable chap
set authname MySystemName
set authkey OurSecretKey
#
# To speak PAP is just similar to CHAP
#
papsite:
set phone 12345678
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
deny chap
accept pap
# enable pap
set authname MyUserName
set authkey MyPassword
#
# On demand dialup example
# Here, we assume that local side use 192.244.185.226 and
# remote side use 192.244.176.44 as their IP address.
# You must supply -auto option to invoke PPP.
#
# ex. % ppp -auto ondemand
#
ondemand:
set phone 1234567
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
set timeout 120
set ifaddr 192.244.185.226 192.244.176.44 255.255.255.0
add 0 0 192.244.176.44
#
# Another on demand example
# If peer assign some IP address for us, and we can't predict it
# until we make a connection, use 0 as local side address.
#
pmdemend:
set phone 1234567
set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp"
set timeout 120
set ifaddr 0 192.244.176.44 255.255.255.0
add 0 0 192.244.176.44
#
# Example to validate incoming user with CHAP
# Invod as ``ppp -direct users'' from login script. User's system name
# and secret-key must be registered into /etc/ppp.secret.
# IP address assigned to peer is registered in ppp.secret, then that
# value is used and value in ``ifaddr'' command has no effect.
#
users:
disable pap
enable chap
enable proxy
set authname ppp-server
set ifaddr 192.244.176.44 292.244.184.31
#
# Example of Callback Request
#
# Here, we assume that peer will hangup the line and initiates a callback
# after successful authentication. We simply use chat script capability
# and wait for a "NO CARRIER" response from our modem.
#
# % ppp callback
#
callback:
set phone 0312345678
set login "ABORT NO\\sCARRIER TIMEOUT 5 login:-\\r-login: MyName word: MySecret TIMEOUT 20 DUMMY"
set debug phase chat
dial
quit
#
# Example for PPP/TELNET and PPP/TCP. Read doc for further details
#
ppptelnet:
set escape 0xff
ppptcp:
set device 192.244.191.33:2400