mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-21 11:13:30 +00:00
c86b6ff551
mutex releases to not require flags for the cases when preemption is not allowed: The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent switching to a higher priority thread on mutex releease and swi schedule, respectively when that switch is not safe. Now that the critical section API maintains a per-thread nesting count, the kernel can easily check whether or not it should switch without relying on flags from the programmer. This fixes a few bugs in that all current callers of swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from fast interrupt handlers and the swi_sched of softclock needed this flag. Note that to ensure that swi_sched()'s in clock and fast interrupt handlers do not switch, these handlers have to be explicitly wrapped in critical_enter/exit pairs. Presently, just wrapping the handlers is sufficient, but in the future with the fully preemptive kernel, the interrupt must be EOI'd before critical_exit() is called. (critical_exit() can switch due to a deferred preemption in a fully preemptive kernel.) I've tested the changes to the interrupt code on i386 and alpha. I have not tested ia64, but the interrupt code is almost identical to the alpha code, so I expect it will work fine. PowerPC and ARM do not yet have interrupt code in the tree so they shouldn't be broken. Sparc64 is broken, but that's been ok'd by jake and tmm who will be fixing the interrupt code for sparc64 shortly. Reviewed by: peter Tested on: i386, alpha
159 lines
4.7 KiB
ArmAsm
159 lines
4.7 KiB
ArmAsm
/*
|
|
* from: vector.s, 386BSD 0.1 unknown origin
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* modified for PC98 by Kakefuda
|
|
*/
|
|
|
|
#ifdef PC98
|
|
#define ICU_IMR_OFFSET 2 /* IO_ICU{1,2} + 2 */
|
|
#else
|
|
#define ICU_IMR_OFFSET 1 /* IO_ICU{1,2} + 1 */
|
|
#endif
|
|
|
|
#define ICU_EOI 0x20 /* XXX - define elsewhere */
|
|
|
|
#define IRQ_BIT(irq_num) (1 << ((irq_num) % 8))
|
|
#define IRQ_BYTE(irq_num) ((irq_num) >> 3)
|
|
|
|
#ifdef AUTO_EOI_1
|
|
#define ENABLE_ICU1 /* use auto-EOI to reduce i/o */
|
|
#define OUTB_ICU1
|
|
#else
|
|
#define ENABLE_ICU1 \
|
|
movb $ICU_EOI,%al ; /* as soon as possible send EOI ... */ \
|
|
OUTB_ICU1 /* ... to clear in service bit */
|
|
#define OUTB_ICU1 \
|
|
outb %al,$IO_ICU1
|
|
#endif
|
|
|
|
#ifdef AUTO_EOI_2
|
|
/*
|
|
* The data sheet says no auto-EOI on slave, but it sometimes works.
|
|
*/
|
|
#define ENABLE_ICU1_AND_2 ENABLE_ICU1
|
|
#else
|
|
#define ENABLE_ICU1_AND_2 \
|
|
movb $ICU_EOI,%al ; /* as above */ \
|
|
outb %al,$IO_ICU2 ; /* but do second icu first ... */ \
|
|
OUTB_ICU1 /* ... then first icu (if !AUTO_EOI_1) */
|
|
#endif
|
|
|
|
/*
|
|
* Macros for interrupt interrupt entry, call to handler, and exit.
|
|
*/
|
|
|
|
#define FAST_INTR(irq_num, vec_name, enable_icus) \
|
|
.text ; \
|
|
SUPERALIGN_TEXT ; \
|
|
IDTVEC(vec_name) ; \
|
|
pushl $0 ; /* dummy error code */ \
|
|
pushl $0 ; /* dummy trap type */ \
|
|
pushal ; \
|
|
pushl %ds ; \
|
|
pushl %es ; \
|
|
pushl %fs ; \
|
|
mov $KDSEL,%ax ; \
|
|
mov %ax,%ds ; \
|
|
mov %ax,%es ; \
|
|
mov $KPSEL,%ax ; \
|
|
mov %ax,%fs ; \
|
|
FAKE_MCOUNT((12+ACTUALLY_PUSHED)*4(%esp)) ; \
|
|
call critical_enter ; \
|
|
movl PCPU(CURTHREAD),%ebx ; \
|
|
incl TD_INTR_NESTING_LEVEL(%ebx) ; \
|
|
pushl intr_unit + (irq_num) * 4 ; \
|
|
call *intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
|
|
enable_icus ; /* (re)enable ASAP (helps edge trigger?) */ \
|
|
addl $4,%esp ; \
|
|
incl cnt+V_INTR ; /* book-keeping can wait */ \
|
|
movl intr_countp + (irq_num) * 4,%eax ; \
|
|
incl (%eax) ; \
|
|
decl TD_INTR_NESTING_LEVEL(%ebx) ; \
|
|
call critical_exit ; \
|
|
MEXITCOUNT ; \
|
|
jmp doreti
|
|
|
|
/*
|
|
* Slow, threaded interrupts.
|
|
*
|
|
* XXX Most of the parameters here are obsolete. Fix this when we're
|
|
* done.
|
|
* XXX we really shouldn't return via doreti if we just schedule the
|
|
* interrupt handler and don't run anything. We could just do an
|
|
* iret. FIXME.
|
|
*/
|
|
#define INTR(irq_num, vec_name, icu, enable_icus, reg, maybe_extra_ipending) \
|
|
.text ; \
|
|
SUPERALIGN_TEXT ; \
|
|
IDTVEC(vec_name) ; \
|
|
pushl $0 ; /* dummy error code */ \
|
|
pushl $0 ; /* dummy trap type */ \
|
|
pushal ; \
|
|
pushl %ds ; /* save our data and extra segments ... */ \
|
|
pushl %es ; \
|
|
pushl %fs ; \
|
|
mov $KDSEL,%ax ; /* load kernel ds, es and fs */ \
|
|
mov %ax,%ds ; \
|
|
mov %ax,%es ; \
|
|
mov $KPSEL,%ax ; \
|
|
mov %ax,%fs ; \
|
|
maybe_extra_ipending ; \
|
|
movb imen + IRQ_BYTE(irq_num),%al ; \
|
|
orb $IRQ_BIT(irq_num),%al ; \
|
|
movb %al,imen + IRQ_BYTE(irq_num) ; \
|
|
outb %al,$icu+ICU_IMR_OFFSET ; \
|
|
enable_icus ; \
|
|
movl PCPU(CURTHREAD),%ebx ; \
|
|
incl TD_INTR_NESTING_LEVEL(%ebx) ; \
|
|
FAKE_MCOUNT(13*4(%esp)) ; /* XXX late to avoid double count */ \
|
|
pushl $irq_num; /* pass the IRQ */ \
|
|
call sched_ithd ; \
|
|
addl $4, %esp ; /* discard the parameter */ \
|
|
decl TD_INTR_NESTING_LEVEL(%ebx) ; \
|
|
MEXITCOUNT ; \
|
|
/* We could usually avoid the following jmp by inlining some of */ \
|
|
/* doreti, but it's probably better to use less cache. */ \
|
|
jmp doreti /* and catch up inside doreti */
|
|
|
|
MCOUNT_LABEL(bintr)
|
|
FAST_INTR(0,fastintr0, ENABLE_ICU1)
|
|
FAST_INTR(1,fastintr1, ENABLE_ICU1)
|
|
FAST_INTR(2,fastintr2, ENABLE_ICU1)
|
|
FAST_INTR(3,fastintr3, ENABLE_ICU1)
|
|
FAST_INTR(4,fastintr4, ENABLE_ICU1)
|
|
FAST_INTR(5,fastintr5, ENABLE_ICU1)
|
|
FAST_INTR(6,fastintr6, ENABLE_ICU1)
|
|
FAST_INTR(7,fastintr7, ENABLE_ICU1)
|
|
FAST_INTR(8,fastintr8, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(9,fastintr9, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(10,fastintr10, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(11,fastintr11, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(12,fastintr12, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(13,fastintr13, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(14,fastintr14, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(15,fastintr15, ENABLE_ICU1_AND_2)
|
|
|
|
#define CLKINTR_PENDING movl $1,CNAME(clkintr_pending)
|
|
/* Threaded interrupts */
|
|
INTR(0,intr0, IO_ICU1, ENABLE_ICU1, al, CLKINTR_PENDING)
|
|
INTR(1,intr1, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(2,intr2, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(3,intr3, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(4,intr4, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(5,intr5, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(6,intr6, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(7,intr7, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(8,intr8, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(9,intr9, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(10,intr10, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(11,intr11, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(12,intr12, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(13,intr13, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(14,intr14, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(15,intr15, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
|
|
MCOUNT_LABEL(eintr)
|