mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-18 10:35:55 +00:00
66ef8af5b0
this introduces a new buffering mechanism which results in dramatic simplification of the channel manager. as several structures have changed, we take the opportunity to move their definitions into the source files where they are used, make them private and de-typedef them. the sound drivers are updated to use snd_setup_intr instead of bus_setup_intr, and to comply with the de-typedefed structures. the ac97, mixer and channel layers have been updated with finegrained locking, as have some drivers- not all though. the rest will follow soon.
193 lines
4.7 KiB
C
193 lines
4.7 KiB
C
/*
|
|
* file: sbcard.h
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef SB_H
|
|
#define SB_H
|
|
|
|
struct sbc_softc;
|
|
void sbc_lock(struct sbc_softc *);
|
|
void sbc_unlock(struct sbc_softc *);
|
|
|
|
/*
|
|
* sound blaster registers
|
|
*/
|
|
|
|
#define SBDSP_RST 0x6
|
|
#define DSP_READ 0xA
|
|
#define DSP_WRITE 0xC
|
|
#define SBDSP_CMD 0xC
|
|
#define SBDSP_STATUS 0xC
|
|
#define DSP_DATA_AVAIL 0xE
|
|
#define DSP_DATA_AVL16 0xF
|
|
|
|
#define SB_MIX_ADDR 0x4
|
|
#define SB_MIX_DATA 0x5
|
|
#if 0
|
|
#define OPL3_LEFT (io_base + 0x0)
|
|
#define OPL3_RIGHT (io_base + 0x2)
|
|
#define OPL3_BOTH (io_base + 0x8)
|
|
#endif
|
|
|
|
/*
|
|
* DSP Commands. There are many, and in many cases they are used explicitly
|
|
*/
|
|
|
|
/* these are not used except for programmed I/O (not in this driver) */
|
|
#define DSP_DAC8 0x10 /* direct DAC output */
|
|
#define DSP_ADC8 0x20 /* direct ADC input */
|
|
|
|
/* these should be used in the SB 1.0 */
|
|
#define DSP_CMD_DAC8 0x14 /* single cycle 8-bit dma out */
|
|
#define DSP_CMD_ADC8 0x24 /* single cycle 8-bit dma in */
|
|
|
|
/* these should be used in the SB 2.0 and 2.01 */
|
|
#define DSP_CMD_DAC8_AUTO 0x1c /* auto 8-bit dma out */
|
|
#define DSP_CMD_ADC8_AUTO 0x2c /* auto 8-bit dma out */
|
|
|
|
#define DSP_CMD_HSSIZE 0x48 /* high speed dma count */
|
|
#define DSP_CMD_HSDAC_AUTO 0x90 /* high speed dac, auto */
|
|
#define DSP_CMD_HSADC_AUTO 0x98 /* high speed adc, auto */
|
|
|
|
/* SBPro commands. Some cards (JAZZ, SMW) also support 16 bits */
|
|
|
|
/* prepare for dma input */
|
|
#define DSP_CMD_DMAMODE(stereo, bit16) (0xA0 | (stereo ? 8:0) | (bit16 ? 4:0))
|
|
|
|
#define DSP_CMD_DAC2 0x16 /* 2-bit adpcm dma out (cont) */
|
|
#define DSP_CMD_DAC2S 0x17 /* 2-bit adpcm dma out (start) */
|
|
|
|
#define DSP_CMD_DAC2S_AUTO 0x1f /* auto 2-bit adpcm dma out (start) */
|
|
|
|
|
|
/* SB16 commands */
|
|
#define DSP_CMD_O16 0xb0
|
|
#define DSP_CMD_I16 0xb8
|
|
#define DSP_CMD_O8 0xc0
|
|
#define DSP_CMD_I8 0xc8
|
|
|
|
#define DSP_MODE_U8MONO 0x00
|
|
#define DSP_MODE_U8STEREO 0x20
|
|
#define DSP_MODE_S16MONO 0x10
|
|
#define DSP_MODE_S16STEREO 0x30
|
|
|
|
#define DSP_CMD_SPKON 0xD1
|
|
#define DSP_CMD_SPKOFF 0xD3
|
|
#define DSP_CMD_SPKR(on) (0xD1 | (on ? 0:2))
|
|
|
|
#define DSP_CMD_DMAPAUSE_8 0xD0
|
|
#define DSP_CMD_DMAPAUSE_16 0xD5
|
|
#define DSP_CMD_DMAEXIT_8 0xDA
|
|
#define DSP_CMD_DMAEXIT_16 0xD9
|
|
#define DSP_CMD_TCONST 0x40 /* set time constant */
|
|
#define DSP_CMD_HSDAC 0x91 /* high speed dac */
|
|
#define DSP_CMD_HSADC 0x99 /* high speed adc */
|
|
|
|
#define DSP_CMD_GETVER 0xE1
|
|
#define DSP_CMD_GETID 0xE7 /* return id bytes */
|
|
|
|
|
|
#define DSP_CMD_OUT16 0x41 /* send parms for dma out on sb16 */
|
|
#define DSP_CMD_IN16 0x42 /* send parms for dma in on sb16 */
|
|
#if 0 /*** unknown ***/
|
|
#define DSP_CMD_FA 0xFA /* get version from prosonic*/
|
|
#define DSP_CMD_FB 0xFB /* set irq/dma for prosonic*/
|
|
#endif
|
|
|
|
/*
|
|
* in fact, for the SB16, dma commands are as follows:
|
|
*
|
|
* cmd, mode, len_low, len_high.
|
|
*
|
|
* cmd is a combination of DSP_DMA16 or DSP_DMA8 and
|
|
*/
|
|
|
|
#define DSP_DMA16 0xb0
|
|
#define DSP_DMA8 0xc0
|
|
# define DSP_F16_DAC 0x00
|
|
# define DSP_F16_ADC 0x08
|
|
# define DSP_F16_AUTO 0x04
|
|
# define DSP_F16_FIFO_ON 0x02
|
|
|
|
/*
|
|
* mode is a combination of the following:
|
|
*/
|
|
#define DSP_F16_STEREO 0x20
|
|
#define DSP_F16_SIGNED 0x10
|
|
|
|
#define IMODE_NONE 0
|
|
#define IMODE_OUTPUT PCM_ENABLE_OUTPUT
|
|
#define IMODE_INPUT PCM_ENABLE_INPUT
|
|
#define IMODE_INIT 3
|
|
#define IMODE_MIDI 4
|
|
|
|
#define NORMAL_MIDI 0
|
|
#define UART_MIDI 1
|
|
|
|
/*
|
|
* values used for bd_flags in SoundBlaster driver
|
|
*/
|
|
#define BD_F_HISPEED 0x0001 /* doing high speed ... */
|
|
|
|
#if 0
|
|
#define BD_F_JAZZ16 0x0002 /* jazz16 detected */
|
|
#define BD_F_JAZZ16_2 0x0004 /* jazz16 type 2 */
|
|
#endif
|
|
|
|
#define BD_F_DUP_MIDI 0x0008 /* duplex midi */
|
|
|
|
#define BD_F_MIX_MASK 0x0070 /* up to 8 mixers (I know of 3) */
|
|
#define BD_F_MIX_CT1335 0x0010 /* CT1335 */
|
|
#define BD_F_MIX_CT1345 0x0020 /* CT1345 */
|
|
#define BD_F_MIX_CT1745 0x0030 /* CT1745 */
|
|
|
|
#define BD_F_SB16 0x0100 /* this is a SB16 */
|
|
#define BD_F_SB16X 0x0200 /* this is a vibra16X or clone */
|
|
#if 0
|
|
#define BD_F_MIDIBUSY 0x0400 /* midi busy */
|
|
#endif
|
|
#define BD_F_ESS 0x0800 /* this is an ESS chip */
|
|
#define BD_F_DMARUN 0x2000
|
|
#define BD_F_DMARUN2 0x4000
|
|
|
|
/*
|
|
* Mixer registers of SB Pro
|
|
*/
|
|
#define VOC_VOL 0x04
|
|
#define MIC_VOL 0x0A
|
|
#define MIC_MIX 0x0A
|
|
#define RECORD_SRC 0x0C
|
|
#define IN_FILTER 0x0C
|
|
#define OUT_FILTER 0x0E
|
|
#define MASTER_VOL 0x22
|
|
#define FM_VOL 0x26
|
|
#define CD_VOL 0x28
|
|
#define LINE_VOL 0x2E
|
|
#define IRQ_NR 0x80
|
|
#define DMA_NR 0x81
|
|
#define IRQ_STAT 0x82
|
|
|
|
/*
|
|
* Additional registers on the SG NX Pro
|
|
*/
|
|
#define COVOX_VOL 0x42
|
|
#define TREBLE_LVL 0x44
|
|
#define BASS_LVL 0x46
|
|
|
|
#define FREQ_HI (1 << 3)/* Use High-frequency ANFI filters */
|
|
#define FREQ_LOW 0 /* Use Low-frequency ANFI filters */
|
|
#define FILT_ON 0 /* Yes, 0 to turn it on, 1 for off */
|
|
#define FILT_OFF (1 << 5)
|
|
|
|
#define MONO_DAC 0x00
|
|
#define STEREO_DAC 0x02
|
|
|
|
/*
|
|
* Mixer registers of SB16
|
|
*/
|
|
#define SB16_IMASK_L 0x3d
|
|
#define SB16_IMASK_R 0x3e
|
|
#define SB16_OMASK 0x3c
|
|
#endif
|