John Baldwin 92cb9c9b67 Different VIA host bridges use different offsets to their AGP config ... registers, so add a register offset array to the softc. We key off the device ID to determine which set of register offsets. Currently the 8385 host bridge used on amd64 is the only bridge to use the AGP3_VIA_* register offsets and all other bridges use the AGP_VIA_* offsets. It is currently unclear if the AGP3_VIA_* offsets are for VIA bridges that implement AGP 3.0 bridges or just for amd64 bridges. Submitted by: Kenneth Culver culverk at sweetdreamsracing dot biz		2004-05-13 20:05:42 +00:00
..
agp_ali.c
agp_amd.c
agp_i810.c	Push down the responsibility for zeroing a physical page from the	2004-04-24 20:53:55 +00:00
agp_if.m
agp_intel.c
agp_nvidia.c
agp_sis.c
agp_via.c	Different VIA host bridges use different offsets to their AGP config	2004-05-13 20:05:42 +00:00
agp.c	Push down the responsibility for zeroing a physical page from the	2004-04-24 20:53:55 +00:00
agppriv.h
agpreg.h	Different VIA host bridges use different offsets to their AGP config	2004-05-13 20:05:42 +00:00
agpvar.h
alpm.c
amdpm.c	Add support for the AMD 8111.	2004-04-20 13:36:44 +00:00
dc21040reg.h
if_dc.c
if_dcreg.h
if_de.c
if_devar.h
if_mn.c
if_pcn.c
if_pcnreg.h
if_rl.c	Implemented per-interface polling(4) control.	2004-04-11 16:23:16 +00:00
if_rlreg.h
if_sf.c
if_sfreg.h
if_sis.c	Implemented per-interface polling(4) control.	2004-04-11 20:34:08 +00:00
if_sisreg.h
if_sk.c	Use BSD spelling, no SysV.	2004-04-19 18:44:04 +00:00
if_skreg.h
if_ste.c
if_stereg.h
if_ti.c
if_tireg.h
if_tl.c
if_tlreg.h
if_vr.c	Implemented per-interface polling(4) control.	2004-04-11 15:18:09 +00:00
if_vrreg.h
if_wb.c
if_wbreg.h
if_xl.c	Boomerang 10/100BT (found in 2c905-TX) chips apparently suffer the	2004-04-13 19:34:20 +00:00
if_xlreg.h
intpm.c
intpmreg.h
locate.pl
ncr.c
ncrreg.h
ti_fw2.h
ti_fw.h
viapm.c
xmaciireg.h
xrpu.c
yukonreg.h