mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-23 11:18:54 +00:00
b8e91dab53
- option DODUMP no longer exists (remove all references to it). - directive `swap on' is now a no-op (don't bother documenting it; remove comment to match code). - directive `dumps on' still works (restore code to match comment; deprecate it in comment). Reviewed by: Poul-Henning Kamp, and me Submitted by: Bruce Evans
685 lines
24 KiB
Plaintext
685 lines
24 KiB
Plaintext
#
|
||
# LINT -- config file for checking all the sources, tries to pull in
|
||
# as much of the source tree as it can.
|
||
#
|
||
# $Id: LINT,v 1.182 1995/05/18 09:16:53 davidg Exp $
|
||
#
|
||
# NB: You probably don't want to try running a kernel built from this
|
||
# file. Instead, you should start from GENERIC, and add options from
|
||
# this file as required.
|
||
#
|
||
|
||
#
|
||
# This directive is mandatory; it defines the architecture to be
|
||
# configured for; in this case, the 386 family. You must also specify
|
||
# at least one CPU (the one you intend to run on); deleting the
|
||
# specification for CPUs you don't need to use may make parts of the
|
||
# system run faster
|
||
#
|
||
machine "i386"
|
||
cpu "I386_CPU"
|
||
cpu "I486_CPU"
|
||
cpu "I586_CPU" # aka Pentium(tm)
|
||
|
||
#
|
||
# This is the ``identification'' of the kernel. Usually this should
|
||
# be the same as the name of your kernel.
|
||
#
|
||
ident LINT
|
||
|
||
#
|
||
# The `maxusers' parameter controls the static sizing of a number of
|
||
# internal system tables by a complicated formula defined in param.c.
|
||
#
|
||
maxusers 10
|
||
|
||
#
|
||
# Under some circumstances it is necessary to make the default max
|
||
# number of processes per user and open files per user more than the
|
||
# defaults on bootup. (an example is a large news server in which
|
||
# the uid, news, can sometimes need > 100 simultaneous processes running)
|
||
options "CHILD_MAX=128"
|
||
options "OPEN_MAX=128"
|
||
|
||
#
|
||
# A math emulator is mandatory if you wish to run on hardware which
|
||
# does not have a floating-point processor. Pick either the original,
|
||
# bogus (but freely-distributable) math emulator, or a much more
|
||
# fully-featured but GPL-licensed emulator taken from Linux.
|
||
#
|
||
options MATH_EMULATE #Support for x87 emulation
|
||
#options GPL_MATH_EMULATE #Support for x87 emualtion via
|
||
#new math emulator
|
||
|
||
#
|
||
# This directive defines a number of things:
|
||
# - The compiled kernel is to be called `kernel'
|
||
# - The root filesystem might be on partition wd0a
|
||
# - Crash dumps will be written to wd0b, if possible. Specifying the
|
||
# dump device here is not recommended. Use dumpon(8).
|
||
#
|
||
config kernel root on wd0 dumps on wd0
|
||
|
||
|
||
#####################################################################
|
||
# COMPATIBILITY OPTIONS
|
||
|
||
#
|
||
# Implement system calls compatible with 4.3BSD and older versions of
|
||
# FreeBSD.
|
||
#
|
||
options "COMPAT_43"
|
||
|
||
#
|
||
# Allow user-mode programs to manipulat their local descriptor tables.
|
||
# This option is required for the WINE Windows(tm) emulator, and is
|
||
# not used by anything else (that we know of).
|
||
#
|
||
options USER_LDT #allow user-level control of i386 ldt
|
||
|
||
#
|
||
# These three options provide support for System V Interface
|
||
# Definition-style interprocess communication, in the form of shared
|
||
# memory, semaphores, and message queues, respectively.
|
||
#
|
||
options SYSVSHM
|
||
options SYSVSEM
|
||
options SYSVMSG
|
||
|
||
|
||
#####################################################################
|
||
# DEBUGGING OPTIONS
|
||
|
||
#
|
||
# Enable the kernel debugger.
|
||
#
|
||
options DDB
|
||
|
||
#
|
||
# KTRACE enables the system-call tracing facility ktrace(2).
|
||
#
|
||
options KTRACE #kernel tracing
|
||
|
||
#
|
||
# The DIAGNOSTIC option is used in a number of source files to enable
|
||
# extra sanity checking of internal structures. This support is not
|
||
# enabled by default because of the extra time it would take to check
|
||
# for these conditions, which can only occur as a result of
|
||
# programming errors.
|
||
#
|
||
options DIAGNOSTIC
|
||
|
||
#
|
||
# Allow ordinary users to take the console - this is useful for X.
|
||
options UCONSOLE
|
||
|
||
|
||
#####################################################################
|
||
# NETWORKING OPTIONS
|
||
|
||
#
|
||
# Protocol families:
|
||
# Only the INET (Internet) family is officially supported in FreeBSD.
|
||
# Source code for the NS (Xerox Network Service), ISO (OSI), and
|
||
# CCITT (X.25) families is provided for amusement value, although we
|
||
# try to ensure that it actually compiles.
|
||
#
|
||
options INET #Internet communications protocols
|
||
options CCITT #X.25 network layer
|
||
options NS #Xerox NS communications protocols
|
||
|
||
# These are currently broken and don't compile
|
||
#options ISO
|
||
#options TPIP #ISO TP class 4 over IP
|
||
#options TPCONS #ISO TP class 0 over X.25
|
||
|
||
#
|
||
# Network interfaces:
|
||
# The `loop' pseudo-device is mandatory when networking is enabled.
|
||
# The `ether' pseudo-device provides generic code to handle
|
||
# Ethernets; it is mandatory when a Ethernet device driver is
|
||
# configured.
|
||
# The 'fddi' pseudo-device provides generic code to support FDDI.
|
||
# The `sppp' pseudo-device serves a similar role for certain types
|
||
# of synchronous PPP links (like `cx').
|
||
# The `sl' pseudo-device implements the Serial Line IP (SLIP) service.
|
||
# The `ppp' pseudo-device implements the Point-to-Point Protocol.
|
||
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be
|
||
# aware of the legal and administrative consequences of enabling this
|
||
# option. The number of devices determines the maximum number of
|
||
# simultaneous BPF clients programs runnable.
|
||
# The `disc' pseudo-device implements a minimal network interface,
|
||
# which throws away all packets sent and never receives any. It is
|
||
# included for testing purposes.
|
||
# The `tun' pseudo-device implements the User Process PPP (iijppp)
|
||
#
|
||
pseudo-device ether #Generic Ethernet
|
||
pseudo-device fddi #Generic FDDI
|
||
pseudo-device sppp #Generic Synchronous PPP
|
||
pseudo-device loop #Network loopback device
|
||
pseudo-device sl 2 #Serial Line IP
|
||
pseudo-device ppp 2 #Point-to-point protocol
|
||
pseudo-device bpfilter 4 #Berkeley packet filter
|
||
pseudo-device disc #Discard device
|
||
pseudo-device tun 1 #Tunnel driver(user process ppp)
|
||
|
||
options NSIP #XNS over IP
|
||
options LLC #X.25 link layer for Ethernets
|
||
options HDLC #X.25 link layer for serial lines
|
||
|
||
# broken
|
||
#options EON #ISO CLNP over IP
|
||
|
||
#
|
||
# Internet family options:
|
||
#
|
||
# TCP_COMPAT_42 causes the TCP code to emulate certain bugs present in
|
||
# 4.2BSD. This option should not be used unless you have a 4.2BSD
|
||
# machine and TCP connections fail.
|
||
#
|
||
# GATEWAY allows the machine to forward packets, and also configures
|
||
# larger static sizes of a number of system tables.
|
||
#
|
||
# MROUTING enables the kernel multicast packet forwarder, which works
|
||
# with mrouted(8).
|
||
#
|
||
# IPFIREWALL enables support for IP firewall construction, in
|
||
# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE does
|
||
# the obvious thing.
|
||
# IPACCT enables IP accounting.
|
||
#
|
||
# ARP_PROXYALL enables global proxy ARP. Beware! This can burn
|
||
# your house down! See netinet/if_ether.c for the gory details.
|
||
# (Eventually there will be a better management interface.)
|
||
#
|
||
options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs
|
||
options GATEWAY #internetwork gateway
|
||
options MROUTING # Multicast routing
|
||
options IPFIREWALL #firewall
|
||
options IPFIREWALL_VERBOSE #print information about
|
||
options IPACCT #ipaccounting
|
||
# dropped packets
|
||
options ARP_PROXYALL # global proxy ARP
|
||
|
||
|
||
#####################################################################
|
||
# FILESYSTEM OPTIONS
|
||
|
||
#
|
||
# Only the root, /usr, and /tmp filesystems need be statically
|
||
# compiled; everything else will be automatically loaded at mount
|
||
# time. (Exception: the UFS family---FFS, MFS, and LFS---cannot
|
||
# currently be demand-loaded.) Some people still prefer to statically
|
||
# compile other filesystems as well.
|
||
#
|
||
# NB: The LFS, PORTAL, and UNION filesystems are known to be buggy,
|
||
# and WILL panic your system if you attempt to do anything with them.
|
||
# They are included here as an incentive for some enterprising soul to
|
||
# sit down and fix them.
|
||
#
|
||
# Note: 4.4BSD NQNFS lease checking has relatively high cost for
|
||
# _local_ I/O as well as remote I/O. Don't use it unless you will
|
||
# using NQNFS.
|
||
#
|
||
|
||
# One of these is mandatory:
|
||
options FFS #Fast filesystem
|
||
options NFS #Network File System
|
||
|
||
# The rest are optional:
|
||
options NQNFS #Enable NQNFS lease checking
|
||
options "CD9660" #ISO 9660 filesystem
|
||
options FDESC #File descriptor filesystem
|
||
options KERNFS #Kernel filesystem
|
||
options LFS #Log filesystem
|
||
options MFS #Memory File System
|
||
options MSDOSFS #MS DOS File System
|
||
options NULLFS #NULL filesystem
|
||
options PORTAL #Portal filesystem
|
||
options PROCFS #Process filesystem
|
||
options UMAPFS #UID map filesystem
|
||
options UNION #Union filesystem
|
||
|
||
# Make space in the kernel for a MFS rootfilesystem. Define to the number
|
||
# of kilobytes to reserve for the filesystem.
|
||
options "MFS_ROOT=10"
|
||
|
||
# Allow this many swap-devices.
|
||
options "NSWAPDEV=20"
|
||
|
||
# Disk quotas are supported when this option is enabled. If you
|
||
# change the value of this option, you must do a `make clean' in your
|
||
# kernel compile directory in order to get a working kernel.
|
||
#
|
||
options QUOTA #enable disk quotas
|
||
|
||
|
||
#####################################################################
|
||
# SCSI DEVICES
|
||
|
||
# SCSI DEVICE CONFIGURATION
|
||
|
||
# The SCSI subsystem consists of the `base' SCSI code, a number of
|
||
# high-level SCSI device `type' drivers, and the low-level host-adapter
|
||
# device drivers. The host adapters are listed in the ISA and PCI
|
||
# device configuration sections below.
|
||
#
|
||
# Beginning with FreeBSD 2.1 you can wire down your SCSI devices so
|
||
# that a given bus, target, and LUN always come on line as the same
|
||
# device unit. In earlier versions the unit numbers were assigned
|
||
# in the order that the devices were probed on the SCSI bus. This
|
||
# means that if you removed a disk drive, you may have had to rewrite
|
||
# your /etc/fstab file, and also that you had to be careful when adding
|
||
# a new disk as it may have been probed earlier and moved your device
|
||
# configuration around.
|
||
|
||
# This old behavior is maintained as the default behavior. The unit
|
||
# assignment begins with the first non-wired down unit for a device
|
||
# type. For example, if you wire a disk as "sd3" then the first
|
||
# non-wired disk will be assigned sd4.
|
||
|
||
# The syntax for wiring down devices is:
|
||
|
||
# disk sd0 at scbus0 target 0 unit 0
|
||
# disk sd1 at scbus0 target 1
|
||
# disk sd2 at scbus0 target 3
|
||
# tape st1 at scbus0 target 6
|
||
# device cd0 at scbus?
|
||
|
||
# "units" (SCSI logical unit number) that are not specified are
|
||
# treated as if specified as LUN 0.
|
||
|
||
# All SCSI devices allocate as many units as are required.
|
||
|
||
# The "unknown" device (uk? in pre-2.1) is now part of the base SCSI
|
||
# configuration and doesn't have to be explicitly configured.
|
||
|
||
controller scbus0 #base SCSI code
|
||
device ch0 #SCSI media changers
|
||
device sd0 #SCSI disks
|
||
device st0 #SCSI tapes
|
||
device cd0 #SCSI CD-ROMs
|
||
|
||
device worm0 at scbus? # SCSI worm
|
||
device pt0 at scbus? # SCSI processor type
|
||
device sctarg0 at scbus? # SCSI target
|
||
|
||
# SCSI OPTIONS:
|
||
|
||
# SCSIDEBUG: When defined enables debugging macros
|
||
# NO_SCSI_SENSE: When defined disables sense descriptions (about 4k)
|
||
# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead
|
||
# only when booting verbosely.
|
||
options SCSIDEBUG
|
||
#options NO_SCSI_SENSE
|
||
options SCSI_REPORT_GEOMETRY
|
||
|
||
|
||
#####################################################################
|
||
# MISCELLANEOUS DEVICES AND OPTIONS
|
||
|
||
#
|
||
# Of these, only the `log' device is truly mandatory. The `pty'
|
||
# device usually turns out to be ``effectively mandatory'', as it is
|
||
# required for `telnetd', `rlogind', `screen', `emacs', and `xterm',
|
||
# among others. The `isdn', `ii', `ity', `itel', and `ispy' devices
|
||
# are all required when ISDN support is used.
|
||
#
|
||
pseudo-device pty 16 #Pseudo ttys - can go as high as 64
|
||
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
|
||
pseudo-device log #Kernel syslog interface (/dev/klog)
|
||
pseudo-device gzip #Exec gzipped a.out's
|
||
pseudo-device vn #Vnode driver (turns a file into a device)
|
||
pseudo-device snp 3 #Snoop device - to look at pty/vty/etc..
|
||
|
||
# These are non-optional for ISDN
|
||
pseudo-device isdn
|
||
pseudo-device ii 4
|
||
pseudo-device ity 4
|
||
pseudo-device itel 2
|
||
pseudo-device ispy 1
|
||
|
||
|
||
#####################################################################
|
||
# HARDWARE DEVICE CONFIGURATION
|
||
|
||
# ISA and EISA devices:
|
||
# Currently there is no separate support for EISA. There should be.
|
||
# Micro Channel is not supported at all.
|
||
|
||
#
|
||
# Mandatory ISA devices: isa, sc or vt, npx
|
||
#
|
||
controller isa0
|
||
|
||
#
|
||
# Options for `isa':
|
||
#
|
||
# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
|
||
# interrupt controller. This saves about 1.25 usec for each interrupt.
|
||
# No problems are known to be caused by this option.
|
||
#
|
||
# AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
|
||
# interrupt controller. This saves about 1.25 usec for each interrupt.
|
||
# Automatic EOI is documented not to work for for the slave with the
|
||
# original i8259A, but it works for some clones and some integrated
|
||
# versions.
|
||
#
|
||
# BOUNCE_BUFFERS provides support for ISA DMA on machines with more
|
||
# than 16 megabytes of memory. It doesn't hurt on other machines.
|
||
# Some broken EISA and VLB hardware may need this, too.
|
||
#
|
||
# DUMMY_NOPS disables extra delays for some bus operations. The delays
|
||
# are mostly for older systems and aren't used consistently. Probably
|
||
# works OK on most EISA bus machines.
|
||
#
|
||
# TUNE_1542 enables the automatic ISA bus speed selection for the
|
||
# Adaptec 1542 boards. Does not work for all boards, use it with caution.
|
||
#
|
||
# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
|
||
# reset the CPU for reboot. This is needed on some systems with broken
|
||
# keyboard controllers.
|
||
options "AUTO_EOI_1"
|
||
#options "AUTO_EOI_2"
|
||
options BOUNCE_BUFFERS
|
||
#options DUMMY_NOPS
|
||
#options "TUNE_1542"
|
||
#options "BROKEN_KEYBOARD_RESET"
|
||
|
||
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
|
||
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
|
||
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
|
||
#options XSERVER # include code for XFree86
|
||
#options FAT_CURSOR # start with block cursor
|
||
|
||
# The syscons console driver (sco color console compatible) - default.
|
||
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
|
||
|
||
#
|
||
# Options for `sc':
|
||
#
|
||
# HARDFONTS allows the driver to load an ISO-8859-1 font to replace
|
||
# the default font in your display adapter's memory.
|
||
#
|
||
options HARDFONTS
|
||
#
|
||
# MAXCONS is maximum number of virtual consoles, no more than 16
|
||
# default value: 12
|
||
#
|
||
options "MAXCONS=16"
|
||
|
||
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
|
||
|
||
#
|
||
# Optional ISA and EISA devices:
|
||
#
|
||
|
||
#
|
||
# SCSI host adapters: `aha', `ahb', `aic', `bt', `nca'
|
||
#
|
||
# aha: Adaptec 154x
|
||
# ahb: Adaptec 174x
|
||
# ahc: Adaptec 274x/284x/294x
|
||
# aic: Adaptec 152x and sound cards using the Adaptec AIC-6360 (slow!)
|
||
# bt: Most Buslogic controllers
|
||
# nca: ProAudioSpectrum cards using the NCR 5380 or Trantor T130
|
||
# uha: UltraStore 14F and 34F
|
||
# sea: Seagate ST01/02 8 bit controller (slow!)
|
||
# wds: Western Digital WD7000 controller (no scatter/gather!).
|
||
#
|
||
# Note that the order is important in order for Buslogic cards to be
|
||
# probed correctly.
|
||
#
|
||
|
||
controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
|
||
controller ahc0 at isa? bio irq ? vector ahcintr # port??? iomem?
|
||
controller ahb0 at isa? bio irq ? vector ahbintr
|
||
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
|
||
controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
|
||
|
||
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
|
||
controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
|
||
controller nca1 at isa? port 0x1f84
|
||
controller nca2 at isa? port 0x1f8c
|
||
controller nca3 at isa? port 0x1e88
|
||
controller nca4 at isa? port 0x350 bio irq 5 vector ncaintr
|
||
|
||
controller sea0 at isa? bio irq 5 iomem 0xdc000 iosiz 0x2000 vector seaintr
|
||
controller wds0 at isa? port 0x350 bio irq 15 drq 6 vector wdsintr
|
||
|
||
#
|
||
# ST-506, ESDI, and IDE hard disks: `wdc' and `wd'
|
||
#
|
||
# NB: ``Enhanced IDE'' is NOT supported at this time.
|
||
#
|
||
# The flags fields are used to enable the multi-sector I/O and
|
||
# the 32BIT I/O modes. The flags may be used in either the controller
|
||
# definition or in the individual disk definitions. The controller
|
||
# definition is supported for the boot configuration stuff.
|
||
#
|
||
# Each drive has a 16 bit flags value defined:
|
||
# The low 8 bits are the maximum value for the multi-sector I/O,
|
||
# where 0xff defaults to the maximum that the drive can handle.
|
||
# The high bit of the 16 bit flags (0x8000) allows probing for
|
||
# 32 bit transfers.
|
||
#
|
||
# The flags field for the drives can be specified in the controller
|
||
# specification with the low 16 bits for drive 0, and the high 16 bits
|
||
# for drive 1.
|
||
# e.g.:
|
||
#controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x00ff8004 vector wdintr
|
||
#
|
||
# specifies that drive 0 will be allowed to probe for 32 bit transfers and
|
||
# a maximum multi-sector transfer of 4 sectors, and drive 1 will not be
|
||
# allowed to probe for 32 bit transfers, but will allow multi-sector
|
||
# transfers up to the maximum that the drive supports.
|
||
#
|
||
|
||
#
|
||
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
|
||
disk wd0 at wdc0 drive 0
|
||
disk wd1 at wdc0 drive 1
|
||
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
|
||
disk wd2 at wdc1 drive 0
|
||
disk wd3 at wdc1 drive 1
|
||
|
||
#
|
||
# Standard floppy disk controllers and floppy tapes: `fdc', `fd', and `ft'
|
||
#
|
||
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
|
||
#
|
||
# Activate this line instead of the fdc0 line above if you happen to
|
||
# have an Insight floppy tape. Probing them proved to be dangerous
|
||
# for people with floppy disks only, so it's "hidden" behind a flag:
|
||
#controller fdc0 at isa? port "IO_FD1" bio flags 1 irq 6 drq 2 vector fdintr
|
||
|
||
disk fd0 at fdc0 drive 0
|
||
disk fd1 at fdc0 drive 1
|
||
tape ft0 at fdc0 drive 2
|
||
|
||
|
||
#
|
||
# Options for `fd':
|
||
#
|
||
# FDSEEKWAIT selects a non-default head-settle time (i.e., the time to
|
||
# wait after a seek is performed). The default value (1/32 s) is
|
||
# usually sufficient. The units are inverse seconds, so a value of 16
|
||
# here means to wait 1/16th of a second; you should choose a power of
|
||
# two.
|
||
#
|
||
options FDSEEKWAIT="16"
|
||
|
||
#
|
||
# Other standard PC hardware: `lpt', `mse', `psm', `sio', etc.
|
||
#
|
||
# lpt: printer port
|
||
# mse: Logitech and ATI InPort bus mouse ports
|
||
# psm: PS/2 mouse port [note: conflicts with sc0/vt0, thus "conflicts" keywd]
|
||
# sio: serial ports (see sio(4))
|
||
|
||
device lpt0 at isa? port "IO_LPT3" tty irq 7 vector lptintr
|
||
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
|
||
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
|
||
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
|
||
|
||
# Options for sio:
|
||
options COMCONSOLE #prefer serial console to video console
|
||
options COM_MULTIPORT #code for some cards with shared IRQs
|
||
options DSI_SOFT_MODEM #code for DSI Softmodems
|
||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||
#DDB, if available.
|
||
|
||
#
|
||
# Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc'
|
||
#
|
||
# cx: Cronyx/Sigma multiport sync/async (with Cisco or PPP framing)
|
||
# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
|
||
# el: 3Com 3C501 (slow!)
|
||
# ep: 3Com 3C509 (buggy)
|
||
# fe: Fujitsu MB86960A/MB86965A Ethernet
|
||
# fea: DEC DEFEA EISA FDDI adapter
|
||
# ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210
|
||
# le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
|
||
# DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
|
||
# lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL)
|
||
# ze: IBM/National Semiconductor PCMCIA ethernet controller.
|
||
# zp: 3Com PCMCIA Etherlink III (It does not require shared memory for
|
||
# send/receive operation, but it needs 'iomem' to read/write the
|
||
# attribute memory)
|
||
#
|
||
|
||
device cx0 at isa? port 0x240 net irq 15 drq 7 vector cxintr
|
||
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
|
||
device eg0 at isa? port 0x310 net irq 5 vector egintr
|
||
device el0 at isa? port 0x300 net irq 9 vector elintr
|
||
device ep0 at isa? port 0x300 net irq 10 vector epintr
|
||
device fe0 at isa? port 0x240 net irq ? vector feintr
|
||
device fea0 at isa? net irq ? vector feaintr
|
||
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
|
||
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
|
||
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
|
||
device lnc0 at isa? port 0x300 net irq 10 drq 0 vector lncintr
|
||
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
|
||
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
|
||
|
||
#
|
||
# ISDN drivers - `isdn'.
|
||
#
|
||
# Uncomment one (and only one) of the following two drivers for the appropriate
|
||
# ISDN device you have. For more information on what's considered appropriate
|
||
# for your given set of circumstances, please read
|
||
# /usr/src/gnu/usr.sbin/docs/INSTALL. It's a bit sparse at present, but it's
|
||
# the best we have right now. The snic driver is also disabled at present,
|
||
# waiting for someone to upgrade the driver to 2.0 (it's in /sys/gnu/scsi/).
|
||
#
|
||
device nic0 at isa? port "IO_COM3" iomem 0xe0000 tty irq 9 vector nicintr
|
||
device nnic0 at isa? port 0x150 iomem 0xe0000 tty irq 12 vector nnicintr
|
||
|
||
#
|
||
# Audio drivers: `snd', `sb', `pas', `gus', `pca'
|
||
#
|
||
# snd: Voxware sound support code
|
||
# sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
|
||
# sbxvi: SoundBlaster 16
|
||
# sbmidi: SoundBlaster 16 MIDI interface
|
||
# pas: ProAudioSpectrum PCM and MIDI
|
||
# gus: Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX
|
||
# gusxvi: Gravis Ultrasound 16-bit PCM
|
||
# gusmax: Gravis Ultrasound MAX (currently broken)
|
||
# mss: Microsoft Sound System
|
||
# opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
|
||
# uart: stand-alone 6850 UART for MIDI
|
||
# mpu: Roland MPU-401 stand-alone card
|
||
#
|
||
# Beware! The addresses specified below are also hard-coded in
|
||
# i386/isa/sound/sound_config.h. If you change the values here, you
|
||
# must also change the values in the include file.
|
||
#
|
||
# pca: PCM audio through your PC speaker
|
||
#
|
||
# If you don't have a lpt0 device at IRQ 7, you can remove the
|
||
# ``conflicts'' specification in the appropriate device entries below.
|
||
#
|
||
# Controls all sound devices
|
||
controller snd0
|
||
device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr
|
||
device sbxvi0 at isa? drq 5
|
||
device sbmidi0 at isa? port 0x330
|
||
device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr
|
||
device gus0 at isa? port 0x220 irq 11 drq 1 vector gusintr
|
||
device gusxvi0 at isa? port 0x530 irq 7 conflicts drq 3 vector adintr
|
||
device gusmax0 at isa? port 0x32c
|
||
device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr
|
||
device opl0 at isa? port 0x388
|
||
device mpu0 at isa? port 0x330 irq 6 drq 0
|
||
device uart0 at isa? port 0x330 irq 5 vector "m6850intr"
|
||
|
||
# Not controlled by `snd'
|
||
device pca0 at isa? port IO_TIMER1 tty
|
||
|
||
#
|
||
# Miscellaneous hardware: `mcd', `wt', `ctx', `apm'
|
||
#
|
||
# mcd: Mitsumi CD-ROM
|
||
# scd: Sony CD-ROM
|
||
# matcd: Matsushita/Panasonic CD-ROM
|
||
# wt: Wangtek and Archive QIC-02/QIC-36 tape drives
|
||
# ctx: Cortex-I frame grabber
|
||
# apm: Laptop Advanced Power Management (experimental)
|
||
# spigot: The Creative Labs Video Spigot video-aquisition board
|
||
# cy: Cyclades high-speed serial driver (ALPHA QUALITY!)
|
||
# gp: National Instruments AT-GPIB and AT-GPIB/TNT board
|
||
# gsc: Genius GS-4500 hand scanner.
|
||
# joy: joystick
|
||
# labpc: National Instrument's Lab-PC and Lab-PC+
|
||
# rc: RISCom/8 multiport card
|
||
|
||
#
|
||
# Notes on the spigot:
|
||
# The video spigot is at 0xad6. This port address can not be changed.
|
||
# The irq values may only be 10, 11, or 15
|
||
# I/O memory is an 8kb region. Possible values are:
|
||
# 0a0000, 0a2000, ..., 0fffff, f00000, f02000, ..., ffffff
|
||
# Note that the start address must be on an even boundary.
|
||
|
||
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
|
||
# for the Sony CDU31/33A CDROM
|
||
device scd0 at isa? port 0x230 bio
|
||
# for the soundblaster 16 multicd - up to 4 devices
|
||
controller matcd0 at isa? port ? bio
|
||
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
|
||
device ctx0 at isa? port 0x230 iomem 0xd0000
|
||
device spigot0 at isa? port 0xad6 irq 15 iomem 0xee000 vector spigintr
|
||
device apm0 at isa?
|
||
device gp0 at isa? port 0x2c0 tty
|
||
device gsc0 at isa? port "IO_GSC1" tty drq 3
|
||
device joy0 at isa? port "IO_GAME"
|
||
device cy0 at isa? tty irq 10 iomem 0xd4000 vector cyintr
|
||
device labpc0 at isa? port 0x260 tty irq 5 vector labpcintr
|
||
device rc0 at isa? port 0x220 tty irq 12 vector rcintr
|
||
|
||
#
|
||
# PCI devices:
|
||
#
|
||
# The main PCI bus device is `pci'. It provides auto-detection and
|
||
# configuration support for all devices on the PCI bus, using either
|
||
# configuration mode defined in the PCI specification.
|
||
#
|
||
# The `ncr' device provides support for the NCR 53C810 and 53C825
|
||
# self-contained SCSI host adapters.
|
||
#
|
||
# The `de' device provides support for the Digital Equipment DC21040
|
||
# self-contained Ethernet adapter.
|
||
#
|
||
# The `fpa' device provides support for the Digital DEFPA PCI FDDI
|
||
# adapter. pseudo-device fddi is also needed.
|
||
#
|
||
# The PROBE_VERBOSE option enables a long listing of chip set registers
|
||
# for supported PCI chip sets (currently only intel Saturn and Mercury).
|
||
#
|
||
controller pci0
|
||
device ncr0
|
||
device de0
|
||
device fpa0
|
||
options PROBE_VERBOSE
|