Rui Paulo 530031a8f1 Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. ... There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.		2013-09-01 20:15:35 +00:00
..
am335x-evm.dts	- Add musb node to shared dtsi and proper pin configuratin for every	2013-07-07 04:23:29 +00:00
am335x.dtsi	Add support for uarts other than the serial console in TI OMAP SoCs.	2013-08-21 14:33:02 +00:00
bcm2835.dtsi	Split bcm2835-rpi-b.dts into bcm2835.dtsi and rpi.dts. This DTS actually works	2013-07-01 05:01:01 +00:00
beaglebone-black.dts	- MMC1 (internal eMMC) pins should be configured as input-pullup, except	2013-07-08 04:30:12 +00:00
beaglebone.dts	- Add musb node to shared dtsi and proper pin configuratin for every	2013-07-07 04:23:29 +00:00
bindings-gpio.txt
bindings-localbus.txt	Add architecture dependent code to support NAND Framework on Marvell SoCs.	2012-05-18 14:41:14 +00:00
bindings-mpp.txt
cubieboard2.dts	Bring initial support for Allwinner A20 SoC (Cubieboard2).	2013-08-07 11:07:56 +00:00
cubieboard.dts	Enable uart driver for A10.	2013-03-01 01:47:11 +00:00
db88f5182.dts
db88f5281.dts
db88f6281.dts	Divide nand flash for DB6281 into two partitions. One for u-boot	2012-05-22 09:27:57 +00:00
db78100.dts	Add architecture dependent code to support NAND Framework on Marvell SoCs.	2012-05-18 14:41:14 +00:00
db78460.dts	Move initialization of CESA decoding windows from common section	2013-05-06 13:34:36 +00:00
digi-ccwmx53.dts	Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards.	2013-09-01 20:15:35 +00:00
dockstar.dts
dreamplug-1001.dts	Add support for the GlobalScale Technologies DreamPlug computer.	2013-01-27 01:17:37 +00:00
dreamplug-1001N.dts	Add support for the GlobalScale Technologies DreamPlug computer.	2013-01-27 01:17:37 +00:00
ea3250.dts	Merging of projects/armv6, part 8	2012-08-15 05:37:10 +00:00
efikamx.dts	Integrate Efika MX project back to home.	2013-03-20 15:39:27 +00:00
exynos5250-arndale.dts	Add FDT for Arndale board and Samsung Exynos5250 SoC.	2013-06-29 12:24:11 +00:00
exynos5250.dtsi	Add FDT for Arndale board and Samsung Exynos5250 SoC.	2013-06-29 12:24:11 +00:00
imx51x.dtsi	Integrate Efika MX project back to home.	2013-03-20 15:39:27 +00:00
imx53x.dtsi	Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards.	2013-09-01 20:15:35 +00:00
mpc8555cds.dts
mpc8572ds.dts
p1020rdb.dts
p2020ds.dts
p2041rdb.dts	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p2041si.dtsi	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p3041ds.dts	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p3041si.dtsi	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p5020ds.dts	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p5020si.dtsi	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
pandaboard.dts	Let the platform calculate the timer frequency at runtime, and use that for	2013-08-05 20:14:56 +00:00
rpi.dts	Split bcm2835-rpi-b.dts into bcm2835.dtsi and rpi.dts. This DTS actually works	2013-07-01 05:01:01 +00:00
sheevaplug.dts	Add a new geom class which allows to divide NAND Flash chip	2012-05-22 08:33:14 +00:00
tegra20-paz00.dts	Add the Tegra2 DTS files. Now our dtc supports including other files use	2012-09-17 07:14:07 +00:00
tegra20.dtsi	Add the Tegra2 DTS files. Now our dtc supports including other files use	2012-09-17 07:14:07 +00:00
trimslice.dts	Merging of projects/armv6, part 9	2012-08-15 06:06:43 +00:00
ts7800.dts
versatilepb.dts	Add support for QEMU's version of Versatile Platform Board	2012-12-13 23:19:13 +00:00
xlp-basic.dts	Add correct range parameter in XLP DTS	2012-08-21 09:37:23 +00:00
zedboard.dts	Add Xilinx Zynq ARM/FPGA SoC support to FreeBSD/arm port.	2013-04-27 22:38:29 +00:00