mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
3701b35988
freebsd/sys/dev/isp/ispmbox.h

942 lines
25 KiB
C
Raw Blame History

/* $Id: $ */
/* release_12_28_98_A */
/*
* Mailbox and Queue Entry Definitions for for Qlogic ISP SCSI adapters.
*
*---------------------------------------
* Copyright (c) 1997, 1998 by Matthew Jacob
* NASA/Ames Research Center
* All rights reserved.
*---------------------------------------
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#ifndef _ISPMBOX_H
#define _ISPMBOX_H
/*
* Mailbox Command Opcodes
*/
#define MBOX_NO_OP 0x0000
#define MBOX_LOAD_RAM 0x0001
#define MBOX_EXEC_FIRMWARE 0x0002
#define MBOX_DUMP_RAM 0x0003
#define MBOX_WRITE_RAM_WORD 0x0004
#define MBOX_READ_RAM_WORD 0x0005
#define MBOX_MAILBOX_REG_TEST 0x0006
#define MBOX_VERIFY_CHECKSUM 0x0007
#define MBOX_ABOUT_FIRMWARE 0x0008
/* 9 */
/* a */
/* b */
/* c */
/* d */
#define MBOX_CHECK_FIRMWARE 0x000e
/* f */
#define MBOX_INIT_REQ_QUEUE 0x0010
#define MBOX_INIT_RES_QUEUE 0x0011
#define MBOX_EXECUTE_IOCB 0x0012
#define MBOX_WAKE_UP 0x0013
#define MBOX_STOP_FIRMWARE 0x0014
#define MBOX_ABORT 0x0015
#define MBOX_ABORT_DEVICE 0x0016
#define MBOX_ABORT_TARGET 0x0017
#define MBOX_BUS_RESET 0x0018
#define MBOX_STOP_QUEUE 0x0019
#define MBOX_START_QUEUE 0x001a
#define MBOX_SINGLE_STEP_QUEUE 0x001b
#define MBOX_ABORT_QUEUE 0x001c
#define MBOX_GET_DEV_QUEUE_STATUS 0x001d
/* 1e */
#define MBOX_GET_FIRMWARE_STATUS 0x001f
#define MBOX_GET_INIT_SCSI_ID 0x0020
#define MBOX_GET_SELECT_TIMEOUT 0x0021
#define MBOX_GET_RETRY_COUNT 0x0022
#define MBOX_GET_TAG_AGE_LIMIT 0x0023
#define MBOX_GET_CLOCK_RATE 0x0024
#define MBOX_GET_ACT_NEG_STATE 0x0025
#define MBOX_GET_ASYNC_DATA_SETUP_TIME 0x0026
#define MBOX_GET_SBUS_PARAMS 0x0027
#define MBOX_GET_TARGET_PARAMS 0x0028
#define MBOX_GET_DEV_QUEUE_PARAMS 0x0029
/* 2a */
/* 2b */
/* 2c */
/* 2d */
/* 2e */
/* 2f */
#define MBOX_SET_INIT_SCSI_ID 0x0030
#define MBOX_SET_SELECT_TIMEOUT 0x0031
#define MBOX_SET_RETRY_COUNT 0x0032
#define MBOX_SET_TAG_AGE_LIMIT 0x0033
#define MBOX_SET_CLOCK_RATE 0x0034
#define MBOX_SET_ACTIVE_NEG_STATE 0x0035
#define MBOX_SET_ASYNC_DATA_SETUP_TIME 0x0036
#define MBOX_SET_SBUS_CONTROL_PARAMS 0x0037
#define MBOX_SET_PCI_PARAMETERS 0x0037
#define MBOX_SET_TARGET_PARAMS 0x0038
#define MBOX_SET_DEV_QUEUE_PARAMS 0x0039
/* 3a */
/* 3b */
/* 3c */
/* 3d */
/* 3e */
/* 3f */
#define MBOX_RETURN_BIOS_BLOCK_ADDR 0x0040
#define MBOX_WRITE_FOUR_RAM_WORDS 0x0041
#define MBOX_EXEC_BIOS_IOCB 0x0042
/* These are for the ISP2100 FC cards */
#define MBOX_GET_LOOP_ID 0x20
#define MBOX_EXEC_COMMAND_IOCB_A64 0x54
#define MBOX_INIT_FIRMWARE 0x60
#define MBOX_GET_INIT_CONTROL_BLOCK 0x61
#define MBOX_INIT_LIP 0x62
#define MBOX_GET_FC_AL_POSITION_MAP 0x63
#define MBOX_GET_PORT_DB 0x64
#define MBOX_CLEAR_ACA 0x65
#define MBOX_TARGET_RESET 0x66
#define MBOX_CLEAR_TASK_SET 0x67
#define MBOX_ABORT_TASK_SET 0x68
#define MBOX_GET_FW_STATE 0x69
#define MBOX_GET_LINK_STATUS 0x6a
#define MBOX_INIT_LIP_RESET 0x6c
#define MBOX_INIT_LIP_LOGIN 0x72
#define ISP2100_SET_PCI_PARAM 0x00ff
#define MBOX_BUSY 0x04
typedef struct {
u_int16_t param[8];
} mbreg_t;
/*
* Mailbox Command Complete Status Codes
*/
#define MBOX_COMMAND_COMPLETE 0x4000
#define MBOX_INVALID_COMMAND 0x4001
#define MBOX_HOST_INTERFACE_ERROR 0x4002
#define MBOX_TEST_FAILED 0x4003
#define MBOX_COMMAND_ERROR 0x4005
#define MBOX_COMMAND_PARAM_ERROR 0x4006
/*
* Asynchronous event status codes
*/
#define ASYNC_BUS_RESET 0x8001
#define ASYNC_SYSTEM_ERROR 0x8002
#define ASYNC_RQS_XFER_ERR 0x8003
#define ASYNC_RSP_XFER_ERR 0x8004
#define ASYNC_QWAKEUP 0x8005
#define ASYNC_TIMEOUT_RESET 0x8006
#define ASYNC_DEVICE_RESET 0x8007
#define ASYNC_EXTMSG_UNDERRUN 0x800A
#define ASYNC_SCAM_INT 0x800B
#define ASYNC_HUNG_SCSI 0x800C
#define ASYNC_KILLED_BUS 0x800D
#define ASYNC_BUS_TRANSIT 0x800E /* LVD -> HVD, eg. */
#define ASYNC_CMD_CMPLT 0x8020
#define ASYNC_CTIO_DONE 0x8021
/* for ISP2100 only */
#define ASYNC_LIP_OCCURRED 0x8010
#define ASYNC_LOOP_UP 0x8011
#define ASYNC_LOOP_DOWN 0x8012
#define ASYNC_LOOP_RESET 0x8013
#define ASYNC_PDB_CHANGED 0x8014
#define ASYNC_CHANGE_NOTIFY 0x8015
/*
* Command Structure Definitions
*/
typedef struct {
u_int32_t ds_base;
u_int32_t ds_count;
} ispds_t;
typedef struct {
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t rqs_entry_count;
u_int8_t rqs_entry_type;
u_int8_t rqs_flags;
u_int8_t rqs_seqno;
#else
u_int8_t rqs_entry_type;
u_int8_t rqs_entry_count;
u_int8_t rqs_seqno;
u_int8_t rqs_flags;
#endif
} isphdr_t;
/* RQS Flag definitions */
#define RQSFLAG_CONTINUATION 0x01
#define RQSFLAG_FULL 0x02
#define RQSFLAG_BADHEADER 0x04
#define RQSFLAG_BADPACKET 0x08
/* RQS entry_type definitions */
#define RQSTYPE_REQUEST 0x01
#define RQSTYPE_DATASEG 0x02
#define RQSTYPE_RESPONSE 0x03
#define RQSTYPE_MARKER 0x04
#define RQSTYPE_CMDONLY 0x05
#define RQSTYPE_ATIO 0x06 /* Target Mode */
#define RQSTYPE_CTIO0 0x07 /* Target Mode */
#define RQSTYPE_SCAM 0x08
#define RQSTYPE_A64 0x09
#define RQSTYPE_A64_CONT 0x0a
#define RQSTYPE_ENABLE_LUN 0x0b /* Target Mode */
#define RQSTYPE_MODIFY_LUN 0x0c /* Target Mode */
#define RQSTYPE_NOTIFY 0x0d /* Target Mode */
#define RQSTYPE_NOTIFY_ACK 0x0e /* Target Mode */
#define RQSTYPE_CTIO1 0x0f /* Target Mode */
#define RQSTYPE_STATUS_CONT 0x10
#define RQSTYPE_T2RQS 0x11
#define RQSTYPE_T4RQS 0x15
#define RQSTYPE_ATIO2 0x16
#define RQSTYPE_CTIO2 0x17
#define RQSTYPE_CSET0 0x18
#define RQSTYPE_T3RQS 0x19
#define RQSTYPE_CTIO3 0x1f
#define ISP_RQDSEG 4
typedef struct {
isphdr_t req_header;
u_int32_t req_handle;
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t req_target;
u_int8_t req_lun_trn;
#else
u_int8_t req_lun_trn;
u_int8_t req_target;
#endif
u_int16_t req_cdblen;
#define req_modifier req_cdblen /* marker packet */
u_int16_t req_flags;
u_int16_t req_reserved;
u_int16_t req_time;
u_int16_t req_seg_count;
u_int8_t req_cdb[12];
ispds_t req_dataseg[ISP_RQDSEG];
} ispreq_t;
#define ISP_RQDSEG_T2 3
typedef struct {
isphdr_t req_header;
u_int32_t req_handle;
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t req_target;
u_int8_t req_lun_trn;
#else
u_int8_t req_lun_trn;
u_int8_t req_target;
#endif
u_int16_t req_scclun;
u_int16_t req_flags;
u_int16_t _res2;
u_int16_t req_time;
u_int16_t req_seg_count;
u_int32_t req_cdb[4];
u_int32_t req_totalcnt;
ispds_t req_dataseg[ISP_RQDSEG_T2];
} ispreqt2_t;
/* req_flag values */
#define REQFLAG_NODISCON 0x0001
#define REQFLAG_HTAG 0x0002
#define REQFLAG_OTAG 0x0004
#define REQFLAG_STAG 0x0008
#define REQFLAG_TARGET_RTN 0x0010
#define REQFLAG_NODATA 0x0000
#define REQFLAG_DATA_IN 0x0020
#define REQFLAG_DATA_OUT 0x0040
#define REQFLAG_DATA_UNKNOWN 0x0060
#define REQFLAG_DISARQ 0x0100
#define REQFLAG_FRC_ASYNC 0x0200
#define REQFLAG_FRC_SYNC 0x0400
#define REQFLAG_FRC_WIDE 0x0800
#define REQFLAG_NOPARITY 0x1000
#define REQFLAG_STOPQ 0x2000
#define REQFLAG_XTRASNS 0x4000
#define REQFLAG_PRIORITY 0x8000
typedef struct {
isphdr_t req_header;
u_int32_t req_handle;
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t req_target;
u_int8_t req_lun_trn;
#else
u_int8_t req_lun_trn;
u_int8_t req_target;
#endif
u_int16_t req_cdblen;
u_int16_t req_flags;
u_int16_t _res1;
u_int16_t req_time;
u_int16_t req_seg_count;
u_int8_t req_cdb[44];
} ispextreq_t;
#define ISP_CDSEG 7
typedef struct {
isphdr_t req_header;
u_int32_t _res1;
ispds_t req_dataseg[ISP_CDSEG];
} ispcontreq_t;
typedef struct {
isphdr_t req_header;
u_int32_t _res1;
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t req_target;
u_int8_t req_lun_trn;
u_int8_t _res2;
u_int8_t req_modifier;
#else
u_int8_t req_lun_trn;
u_int8_t req_target;
u_int8_t req_modifier;
u_int8_t _res2;
#endif
} ispmarkreq_t;
#define SYNC_DEVICE 0
#define SYNC_TARGET 1
#define SYNC_ALL 2
typedef struct {
isphdr_t req_header;
u_int32_t req_handle;
u_int16_t req_scsi_status;
u_int16_t req_completion_status;
u_int16_t req_state_flags;
u_int16_t req_status_flags;
u_int16_t req_time;
u_int16_t req_sense_len;
u_int32_t req_resid;
u_int8_t _res1[8];
u_int8_t req_sense_data[32];
} ispstatusreq_t;
/*
* For Qlogic 2100, the high order byte of SCSI status has
* additional meaning.
*/
#define RQCS_RU 0x800 /* Residual Under */
#define RQCS_RO 0x400 /* Residual Over */
#define RQCS_SV 0x200 /* Sense Length Valid */
#define RQCS_RV 0x100 /* Residual Valid */
/*
* Completion Status Codes.
*/
#define RQCS_COMPLETE 0x0000
#define RQCS_INCOMPLETE 0x0001
#define RQCS_DMA_ERROR 0x0002
#define RQCS_TRANSPORT_ERROR 0x0003
#define RQCS_RESET_OCCURRED 0x0004
#define RQCS_ABORTED 0x0005
#define RQCS_TIMEOUT 0x0006
#define RQCS_DATA_OVERRUN 0x0007
#define RQCS_COMMAND_OVERRUN 0x0008
#define RQCS_STATUS_OVERRUN 0x0009
#define RQCS_BAD_MESSAGE 0x000a
#define RQCS_NO_MESSAGE_OUT 0x000b
#define RQCS_EXT_ID_FAILED 0x000c
#define RQCS_IDE_MSG_FAILED 0x000d
#define RQCS_ABORT_MSG_FAILED 0x000e
#define RQCS_REJECT_MSG_FAILED 0x000f
#define RQCS_NOP_MSG_FAILED 0x0010
#define RQCS_PARITY_ERROR_MSG_FAILED 0x0011
#define RQCS_DEVICE_RESET_MSG_FAILED 0x0012
#define RQCS_ID_MSG_FAILED 0x0013
#define RQCS_UNEXP_BUS_FREE 0x0014
#define RQCS_DATA_UNDERRUN 0x0015
#define RQCS_XACT_ERR1 0x0018
#define RQCS_XACT_ERR2 0x0019
#define RQCS_XACT_ERR3 0x001A
#define RQCS_BAD_ENTRY 0x001B
#define RQCS_QUEUE_FULL 0x001C
#define RQCS_PHASE_SKIPPED 0x001D
#define RQCS_ARQS_FAILED 0x001E
#define RQCS_WIDE_FAILED 0x001F
#define RQCS_SYNCXFER_FAILED 0x0020
#define RQCS_LVD_BUSERR 0x0021
/* 2100 Only Completion Codes */
#define RQCS_PORT_UNAVAILABLE 0x0028
#define RQCS_PORT_LOGGED_OUT 0x0029
#define RQCS_PORT_CHANGED 0x002A
#define RQCS_PORT_BUSY 0x002B
/*
* State Flags (not applicable to 2100)
*/
#define RQSF_GOT_BUS 0x0100
#define RQSF_GOT_TARGET 0x0200
#define RQSF_SENT_CDB 0x0400
#define RQSF_XFRD_DATA 0x0800
#define RQSF_GOT_STATUS 0x1000
#define RQSF_GOT_SENSE 0x2000
#define RQSF_XFER_COMPLETE 0x4000
/*
* Status Flags (not applicable to 2100)
*/
#define RQSTF_DISCONNECT 0x0001
#define RQSTF_SYNCHRONOUS 0x0002
#define RQSTF_PARITY_ERROR 0x0004
#define RQSTF_BUS_RESET 0x0008
#define RQSTF_DEVICE_RESET 0x0010
#define RQSTF_ABORTED 0x0020
#define RQSTF_TIMEOUT 0x0040
#define RQSTF_NEGOTIATION 0x0080
/*
* FC (ISP2100) specific initialization data structures
*/
/*
* Initialization Control Block
*
* Version One format.
*/
typedef struct {
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t _reserved0;
u_int8_t icb_version;
#else
u_int8_t icb_version;
u_int8_t _reserved0;
#endif
u_int16_t icb_fwoptions;
u_int16_t icb_maxfrmlen;
u_int16_t icb_maxalloc;
u_int16_t icb_execthrottle;
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t icb_retry_delay;
u_int8_t icb_retry_count;
#else
u_int8_t icb_retry_count;
u_int8_t icb_retry_delay;
#endif
u_int8_t icb_nodename[8];
u_int16_t icb_hardaddr;
#if BYTE_ORDER == BIG_ENDIAN
u_int8_t _reserved1;
u_int8_t icb_iqdevtype;
#else
u_int8_t icb_iqdevtype;
u_int8_t _reserved1;
#endif
u_int8_t icb_portname[8];
u_int16_t icb_rqstout;
u_int16_t icb_rspnsin;
u_int16_t icb_rqstqlen;
u_int16_t icb_rsltqlen;
u_int16_t icb_rqstaddr[4];
u_int16_t icb_respaddr[4];
} isp_icb_t;
#define ICB_VERSION1 1
#define ICBOPT_HARD_ADDRESS (1<<0)
#define ICBOPT_FAIRNESS (1<<1)
#define ICBOPT_FULL_DUPLEX (1<<2)
#define ICBOPT_FAST_POST (1<<3)
#define ICBOPT_TGT_ENABLE (1<<4)
#define ICBOPT_INI_DISABLE (1<<5)
#define ICBOPT_INI_ADISC (1<<6)
#define ICBOPT_INI_TGTTYPE (1<<7)
#define ICBOPT_PDBCHANGE_AE (1<<8)
#define ICBOPT_NOLIP (1<<9)
#define ICBOPT_SRCHDOWN (1<<10)
#define ICBOPT_PREVLOOP (1<<11)
#define ICBOPT_STOP_ON_QFULL (1<<12)
#define ICBOPT_FULL_LOGIN (1<<13)
#define ICBOPT_USE_PORTNAME (1<<14)
#define ICB_MIN_FRMLEN 256
#define ICB_MAX_FRMLEN 2112
#define ICB_DFLT_FRMLEN 1024
#define RQRSP_ADDR0015 0
#define RQRSP_ADDR1631 1
#define RQRSP_ADDR3247 2
#define RQRSP_ADDR4863 3
#define ICB_NNM0 7
#define ICB_NNM1 6
#define ICB_NNM2 5
#define ICB_NNM3 4
#define ICB_NNM4 3
#define ICB_NNM5 2
#define ICB_NNM6 1
#define ICB_NNM7 0
#define MAKE_NODE_NAME_FROM_WWN(array, wwn) \
array[ICB_NNM0] = (u_int8_t) ((wwn >> 0) & 0xff), \
array[ICB_NNM1] = (u_int8_t) ((wwn >> 8) & 0xff), \
array[ICB_NNM2] = (u_int8_t) ((wwn >> 16) & 0xff), \
array[ICB_NNM3] = (u_int8_t) ((wwn >> 24) & 0xff), \
array[ICB_NNM4] = (u_int8_t) ((wwn >> 32) & 0xff), \
array[ICB_NNM5] = (u_int8_t) ((wwn >> 40) & 0xff), \
array[ICB_NNM6] = (u_int8_t) ((wwn >> 48) & 0xff), \
array[ICB_NNM7] = (u_int8_t) ((wwn >> 56) & 0xff)
/*
* Target Mode Structures
*/
#define TGTSVALID 0x80 /* scsi status & sense data valid */
#define SUGGSENSELEN 18
/*
* Structure for Enable Lun and Modify Lun queue entries
*/
typedef struct {
isphdr_t le_header;
u_int32_t le_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t le_lun;
u_int8_t le_rsvd;
u_int8_t le_ops; /* Modify LUN only */
u_int8_t le_tgt; /* Not for FC */
#endif
u_int32_t le_flags; /* Not for FC */
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t le_status;
u_int8_t le_rsvd2;
u_int8_t le_cmd_count;
u_int8_t le_in_count;
u_int8_t le_cdb6len; /* Not for FC */
u_int8_t le_cdb7len; /* Not for FC */
#endif
u_int16_t le_timeout;
u_int16_t le_reserved[20];
} lun_entry_t;
/*
* le_flags values
*/
#define LUN_TQAE 0x00000001 /* Tagged Queue Action Enable */
#define LUN_DSSM 0x01000000 /* Disable Sending SDP Message */
#define LUN_DM 0x40000000 /* Disconnects Mandatory */
/*
* le_ops values
*/
#define LUN_CCINCR 0x01 /* increment command count */
#define LUN_CCDECR 0x02 /* decrement command count */
#define LUN_ININCR 0x40 /* increment immed. notify count */
#define LUN_INDECR 0x80 /* decrement immed. notify count */
/*
* le_status values
*/
#define LUN_ERR 0x04 /* request completed with error */
#define LUN_INVAL 0x06 /* invalid request */
#define LUN_NOCAP 0x16 /* can't provide requested capability */
#define LUN_ENABLED 0x3E /* LUN already enabled */
/*
* Immediate Notify Entry structure
*/
#define IN_MSGLEN 8 /* 8 bytes */
#define IN_RSVDLEN 8 /* 8 words */
typedef struct {
isphdr_t in_header;
u_int32_t in_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t in_lun; /* lun */
u_int8_t in_iid; /* initiator */
u_int8_t in_rsvd;
u_int8_t in_tgt; /* target */
#endif
u_int32_t in_flags;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t in_status;
u_int8_t in_rsvd2;
u_int8_t in_tag_val; /* tag value */
u_int8_t in_tag_type; /* tag type */
#endif
u_int16_t in_seqid; /* sequence id */
u_int8_t in_msg[IN_MSGLEN]; /* SCSI message bytes */
u_int16_t in_reserved[IN_RSVDLEN];
u_int8_t in_sense[SUGGSENSELEN]; /* suggested sense data */
} in_entry_t;
typedef struct {
isphdr_t in_header;
u_int32_t in_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t in_lun; /* lun */
u_int8_t in_iid; /* initiator */
#endif
u_int16_t in_rsvd;
u_int32_t in_rsvd2;
u_int16_t in_status;
u_int16_t in_task_flags;
u_int16_t in_seqid; /* sequence id */
} in_fcentry_t;
/*
* Values for the in_status field
*/
#define IN_NO_RCAP 0x16 /* requested capability not available */
#define IN_IDE_RECEIVED 0x33 /* Initiator Detected Error msg received */
#define IN_RSRC_UNAVAIL 0x34 /* resource unavailable */
#define IN_MSG_RECEIVED 0x36 /* SCSI message received */
#define IN_PORT_LOGOUT 0x29 /* port has logged out (FC) */
#define IN_ABORT_TASK 0x20 /* task named in RX_ID is being aborted (FC) */
/*
* Notify Acknowledge Entry structure
*/
#define NA_RSVDLEN 22
typedef struct {
isphdr_t na_header;
u_int32_t na_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t na_lun; /* lun */
u_int8_t na_iid; /* initiator */
u_int8_t na_rsvd;
u_int8_t na_tgt; /* target */
#endif
u_int32_t na_flags;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t na_status;
u_int8_t na_event;
#endif
u_int16_t na_seqid; /* sequence id */
u_int16_t na_reserved[NA_RSVDLEN];
} na_entry_t;
/*
* Value for the na_event field
*/
#define NA_RST_CLRD 0x80 /* Clear an async event notification */
#define NA2_RSVDLEN 21
typedef struct {
isphdr_t na_header;
u_int32_t na_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t na_lun; /* lun */
u_int8_t na_iid; /* initiator */
#endif
u_int16_t na_rsvd;
u_int16_t na_flags;
u_int16_t na_rsvd2;
u_int16_t na_status;
u_int16_t na_task_flags;
u_int16_t na_seqid; /* sequence id */
u_int16_t na_reserved[NA2_RSVDLEN];
} na_fcentry_t;
#define NAFC_RST_CLRD 0x40
/*
* Value for the na_event field
*/
#define NA_RST_CLRD 0x80 /* Clear an async event notification */
/*
* Accept Target I/O Entry structure
*/
#define ATIO_CDBLEN 26
typedef struct {
isphdr_t at_header;
u_int32_t at_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t at_lun; /* lun */
u_int8_t at_iid; /* initiator */
u_int8_t at_cdblen; /* cdb length */
u_int8_t at_tgt; /* target */
#endif
u_int32_t at_flags;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t at_status; /* firmware status */
u_int8_t at_scsi_status; /* scsi status */
u_int8_t at_tag_val; /* tag value */
u_int8_t at_tag_type; /* tag type */
#endif
u_int8_t at_cdb[ATIO_CDBLEN]; /* received CDB */
u_int8_t at_sense[SUGGSENSELEN]; /* suggested sense data */
} at_entry_t;
/*
* at_flags values
*/
#define AT_NODISC 0x00008000 /* disconnect disabled */
#define AT_TQAE 0x00000001 /* Tagged Queue Action enabled */
/*
* at_status values
*/
#define AT_PATH_INVALID 0x07 /* ATIO sent to firmware for disabled lun */
#define AT_PHASE_ERROR 0x14 /* Bus phase sequence error */
#define AT_NOCAP 0x16 /* Requested capability not available */
#define AT_BDR_MSG 0x17 /* Bus Device Reset msg received */
#define AT_CDB 0x3D /* CDB received */
/*
* Accept Target I/O Entry structure, Type 2
*/
#define ATIO2_CDBLEN 16
typedef struct {
isphdr_t at_header;
u_int32_t at_reserved2;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t at_lun; /* lun */
u_int8_t at_iid; /* initiator */
#endif
u_int16_t at_rxid; /* response ID */
u_int16_t at_flags;
u_int16_t at_status; /* firmware status */
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t at_reserved1;
u_int8_t at_taskcodes;
u_int8_t at_taskflags;
u_int8_t at_execodes;
#endif
u_int8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */
u_int32_t at_datalen; /* allocated data len */
u_int16_t at_scclun;
u_int16_t at_reserved3;
u_int16_t at_scsi_status;
u_int8_t at_sense[SUGGSENSELEN]; /* suggested sense data */
} at2_entry_t;
#define ATIO2_TC_ATTR_MASK 0x7
#define ATIO2_TC_ATTR_SIMPLEQ 0
#define ATIO2_TC_ATTR_HEADOFQ 1
#define ATIO2_TC_ATTR_ORDERED 2
#define ATIO2_TC_ATTR_ACAQ 4
#define ATIO2_TC_ATTR_UNTAGGED 5
#define TC2TT(code) \
(((code) == ATIO2_TC_ATTR_SIMPLEQ)? 0x20 : \
(((code) == ATIO2_TC_ATTR_HEADOFQ)? 0x21 : \
(((code) == ATIO2_TC_ATTR_ORDERED)? 0x22 : \
(((code) == ATIO2_TC_ATTR_ACAQ)? 0x24 : 0))))
/*
* Continue Target I/O Entry structure
* Request from driver. The response from the
* ISP firmware is the same except that the last 18
* bytes are overwritten by suggested sense data if
* the 'autosense valid' bit is set in the status byte.
*/
typedef struct {
isphdr_t ct_header;
u_int32_t ct_reserved;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t ct_lun; /* lun */
u_int8_t ct_iid; /* initiator id */
u_int8_t ct_rsvd;
u_int8_t ct_tgt; /* our target id */
#endif
u_int32_t ct_flags;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t ct_status; /* isp status */
u_int8_t ct_scsi_status; /* scsi status */
u_int8_t ct_tag_val; /* tag value */
u_int8_t ct_tag_type; /* tag type */
#endif
u_int32_t ct_xfrlen; /* transfer length */
u_int32_t ct_resid; /* residual length */
u_int16_t ct_timeout;
u_int16_t ct_seg_count;
ispds_t ct_dataseg[ISP_RQDSEG];
} ct_entry_t;
/*
* ct_flags values
*/
#define CT_TQAE 0x00000001 /* Tagged Queue Action enable */
#define CT_DATA_IN 0x00000040 /* Data direction */
#define CT_DATA_OUT 0x00000080 /* Data direction */
#define CT_NO_DATA 0x000000C0 /* Data direction */
#define CT_DATAMASK 0x000000C0 /* Data direction */
#define CT_NODISC 0x00008000 /* Disconnects disabled */
#define CT_DSDP 0x01000000 /* Disable Save Data Pointers */
#define CT_SENDRDP 0x04000000 /* Send Restore Pointers msg */
#define CT_SENDSTATUS 0x80000000 /* Send SCSI status byte */
/*
* ct_status values
* - set by the firmware when it returns the CTIO
*/
#define CT_OK 0x01 /* completed without error */
#define CT_ABORTED 0x02 /* aborted by host */
#define CT_ERR 0x04 /* see sense data for error */
#define CT_INVAL 0x06 /* request for disabled lun */
#define CT_NOPATH 0x07 /* invalid ITL nexus */
#define CT_INVRXID 0x08 /* (FC only) Invalid RX_ID */
#define CT_RSELTMO 0x0A /* reselection timeout after 2 tries */
#define CT_TIMEOUT 0x0B /* timed out */
#define CT_RESET 0x0E /* SCSI Bus Reset occurred */
#define CT_PHASE_ERROR 0x14 /* Bus phase sequence error */
#define CT_BDR_MSG 0x17 /* Bus Device Reset msg received */
#define CT_TERMINATED 0x19 /* due to Terminate Transfer mbox cmd */
#define CT_LOGOUT 0x29 /* port logout not acknowledged yet */
#define CT_NOACK 0x35 /* Outstanding Immed. Notify. entry */
/*
* When the firmware returns a CTIO entry, it may overwrite the last
* part of the structure with sense data. This starts at offset 0x2E
* into the entry, which is in the middle of ct_dataseg[1]. Rather
* than define a new struct for this, I'm just using the sense data
* offset.
*/
#define CTIO_SENSE_OFFSET 0x2E
/*
* Entry length in u_longs. All entries are the same size so
* any one will do as the numerator.
*/
#define UINT32_ENTRY_SIZE (sizeof(at_entry_t)/sizeof(u_int32_t))
/*
* QLA2100 CTIO (type 2) entry
*/
#define MAXRESPLEN 26
typedef struct {
isphdr_t ct_header;
u_int32_t ct_reserved;
#if BYTE_ORDER == BIG_ENDIAN
#else
u_int8_t ct_lun; /* lun */
u_int8_t ct_iid; /* initiator id */
#endif
u_int16_t ct_rxid; /* response ID */
u_int16_t ct_flags;
u_int16_t ct_status; /* isp status */
u_int16_t ct_timeout;
u_int16_t ct_seg_count;
u_int32_t ct_reloff; /* relative offset */
u_int32_t ct_resid; /* residual length */
union {
/*
* The three different modes that the target driver
* can set the CTIO2 up as.
*
* The first is for sending FCP_DATA_IUs as well as
* (optionally) sending a terminal SCSI status FCP_RSP_IU.
*
* The second is for sending SCSI sense data in an FCP_RSP_IU.
* Note that no FCP_DATA_IUs will be sent.
*
* The third is for sending FCP_RSP_IUs as built specifically
* in system memory as located by the isp_dataseg.
*/
struct {
u_int32_t _reserved;
u_int16_t _reserved2;
u_int16_t ct_scsi_status;
u_int32_t ct_xfrlen;
ispds_t ct_dataseg[ISP_RQDSEG_T2];
} m0;
struct {
u_int16_t _reserved;
u_int16_t _reserved2;
u_int16_t ct_senselen;
u_int16_t ct_scsi_status;
u_int16_t ct_resplen;
u_int8_t ct_resp[MAXRESPLEN];
} m1;
struct {
u_int32_t _reserved;
u_int16_t _reserved2;
u_int16_t _reserved3;
u_int32_t ct_datalen;
ispds_t ct_fcp_rsp_iudata;
} m2;
/*
* CTIO2 returned from F/W...
*/
struct {
u_int32_t _reserved[4];
u_int16_t ct_scsi_status;
u_int8_t ct_sense[SUGGSENSELEN];
} fw;
} rsp;
} ct2_entry_t;
/*
* ct_flags values for CTIO2
*/
#define CT2_FLAG_MMASK 0x0003
#define CT2_FLAG_MODE0 0x0000
#define CT2_FLAG_MODE1 0x0001
#define CT2_FLAG_MODE2 0x0002
#define CT2_DATA_IN CT_DATA_IN
#define CT2_DATA_OUT CT_DATA_OUT
#define CT2_NO_DATA CT_NO_DATA
#define CT2_DATAMASK CT_DATA_MASK
#define CT2_CCINCR 0x0100
#define CT2_FASTPOST 0x0200
#define CT2_SENDSTATUS 0x8000
/*
* ct_status values are (mostly) the same as that for ct_entry.
*/
/*
* ct_scsi_status values- the low 8 bits are the normal SCSI status
* we know and love. The upper 8 bits are validity markers for FCP_RSP_IU
* fields.
*/
#define CT2_RSPLEN_VALID 0x0100
#define CT2_SNSLEN_VALID 0x0200
#define CT2_DATA_OVER 0x0400
#define CT2_DATA_UNDER 0x0800
#endif /* _ISPMBOX_H */
Reference in New Issue View Git Blame Copy Permalink